This patch reverts parts of commits 0d8b24f6b and 0785966d dealing with
the addition of a controller during virDomainHostdevAssignAddress. This
caused a regression for the hostdev hotplug path which assumes the
qemuDomainFindOrCreateSCSIDiskController will add the new controller
during qemuDomainAttachHostSCSIDevice to both the running domain and
the domain def controller list when the controller doesn't yet exist
(whether due to no SCSI controllers existing or the addition of a new
controller because existing ones are full).
Since commit id 0d8b24f6 will call virDomainHostdevAssignAddress during
virDomainDeviceDefPostParseInternal which is called either during domain
definition post processing (via an iterator during virDomainDefPostParse)
or directly from virDomainDeviceDefParse during hotplug, the change
broke the "side effect" of being able to add both a hostdev and controller
to the running domain.
The regression would only be seen if the running domain didn't have a
SCSI controller already defined or if the existing SCSI controller was
"full" of devices and a new controller needed to be created.
This patch will also add some extra comments to the code to avoid a
similar future change.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To be used by the family of virtio input devices:
<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
qemu 2.5 provides virtio video device. It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allowing to have the extra undefined/default state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
Libvirt already has two types of panic devices - pvpanic and pSeries firmware.
This patch introduces the 'model' attribute and a new type of panic device.
'isa' model is for ISA pvpanic device.
'pseries' model is a default value for pSeries guests.
'hyperv' model is the new type. It's used for Hyper-V crash.
Schema and docs are updated for the new attribute.
Report the maximum possible number of VFs for an SRIOV PF, like this:
<capability type='virtual_functions' maxCount='7'>
...
</capability>
I've just discovered that the virtual_functions and physical_functions
capabilities are not supported in the virNodeDeviceParse functions,
only in virNodeDeviceFormat (I suppose because they are only reported,
not set from XML). This should probably be remedied, but is less
immediately useful than the current patch.
The checked predicate is a deduction from the following checks:
1) maximum cpu id is checked for every parsed <vcpusched> element
2) the resulting bitmaps are checked for overlaps
3) there has to be at least one cpu per <vcpusched>
From the above checks we can indeed deduce that if we have one
<vcpusched> element per CPU we will have at most 'maxvcpus' of them.
Drop the explicit check since it's redundant.
Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.
USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship. Reorder the controllers
in XML in to place the master controller before its companions. This is
required by QEMU to not fail with error message:
error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fix a cut-n-paste error from commit id '35eecdde' where the previous
check for max_sectors seems to have been copied, but the error message
parameter not updated to be ioeventfd
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1264008
The existing algorithm assumed that someone was making small, incremental
changes; however, it is possible to change iothreads from 0 (or relatively
small number) to some really large number and the algorithm would possibly
spin its wheels doing unnecessary searches.
So, optimize the algorithm using a bitmap to find available iothread_id's
starting at 1 that aren't already defined by a "<thread id='#'>" and
filling in the iothreadids array with those iothread_id values.
Although theoretically both should be the same value, the niothreadids
should be used in favor of iothreads when performing comparisons. This
leaves the iothreads as a purely numeric value to be saved in the config
file. The one exception to the rule is virDomainIOThreadIDDefArrayInit
where the iothreadids are being generated from the iothreads count since
iothreadids were added after initial iothreads support.
Create a separate local API that will fill in the iothreadid array
entries that were not defined by <iothread id='#'> entries in the XML.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Our docs state that subelements of <metadata> shall have a namespace
and the medatata APIs expect that too. To avoid inaccessible
<metadata> sub-elements, just remove those that don't conform to the
documentation.
Apart from adding the new condition this patch renames the function and
refactors the code flow to allow the changes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1245525
Commit id '7383b8cc' changed virDomainDef 'virtType' to an enum, that
caused a build failure on some archs due to comparing an unsigned value
to < 0. Adjust the fetch of 'type' to be into temporary 'int virtType'
and then assign that virtType to the def->virtType
Introduce VIR_DOMAIN_VIRT_NONE to give domaintype the default value of zero.
This is specially helpful in constructing better error messages
when we don't want to look up the default emulator by virtType.
The test data in vircapstest.c is also modified to reflect this change.
As of commit 6992994, we set graphics/@listen attribute according to the
first listen child element even if that element is of type='network'.
This was done for backward compatibility with applications which only
support the original listen attribute. However, by doing so we broke
migration to older libvirt which tried to check that the listen
attribute matches one of the listen child elements but which did not
take type='network' elements into account.
We are not concerned about compatibility with old applications when
formatting domain XML for migration for two reasons. The XML is consumed
only by libvirtd and the IP address associated with type='network'
listen address on the source host is just useless on the destination
host. Thus, we can safely avoid propagating the type='network' IP
address to graphics/@listen attribute when creating migratable XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1265111
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When implementing memory hotplug I've opted to recalculate the initial
memory size (contents of the <memory> element) as a sum of the sizes of
NUMA nodes when NUMA was enabled. This was based on an assumption that
qemu did not allow starting when the NUMA node size total didn't equal
to the initial memory size. Unfortunately the check was introduced to
qemu just lately.
This patch uses the new XML parser flag to decide whether it's safe to
update the memory size total from the NUMA cell sizes or not.
As an additional improvement we now report an error in case when the
size of hotplug memory would exceed the total memory size.
The rest of the changes assures that the function is called with correct
flags.
Add 'initial_memory' member to struct virDomainMemtune so that the
memory size can be pre-calculated once instead of inferring it always
again and again.
Separating of the fields will also allow finer granularity of decisions
in later patches where it will allow to keep the old initial memory
value in cases where we are handling incomming migration from older
versions that did not always update the size from NUMA as the code did
previously.
The change also requires modification of the qemu memory alignment
function since at the point where we are modifying the size of NUMA
nodes the total size needs to be recalculated too.
The refactoring done in this patch also fixes a crash in the hyperv
driver that did not properly initialize def->numa and thus
virDomainNumaGetMemorySize(def->numa) crashed.
In summary this patch should have no functional impact at this point.
The post parse func is growing rather large. Since later patches will
introduce more logic in the memory post parse code, split it into a
separate handler.
Add a new parser flag that will mark code paths that parse XML files
wich will not be used with existing VM state so that post parse
callbacks can possibly do ABI incompatible changes if needed.
The flag was used only for formatting the XML and once the parser and
formatter flags were split in 0ecd685109
it doesn't make sense any more to have it.