Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.
The API will currently return bitmap only for the active vCPUs but that
will change in the future.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.
As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.
CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.
Drop the <backingStore> subtree once we want to update the XML.
Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<backingStore type="file" index="1">
<format type="qcow2"/>
<source file="/var/lib/libvirt/images/vm.1436949097"/>
<backingStore/>
</backingStore>
<target dev="hdc" bus="ide"/>
...
</disk>
After:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<target dev="hdc" bus="ide"/>
...
</disk>
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.
If neither callback could be registered, there's clearly no need for a
timeout.
If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
After commit 57177f1, the cpu-stats command format change to:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378732785511
vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378.732785511 seconds
https://bugzilla.redhat.com/show_bug.cgi?id=1301807
Signed-off-by: Luyao Huang <lhuang@redhat.com>
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.
Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".
Non replaced instances are unique to the command.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.
The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
Instead of the custom error:
error: iothreadpin: invalid cpulist.
use vshCommandOptStringReq and let it report a more specific error:
error: Failed to get option 'cpulist': Option argument is empty
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
While parsing device addresses we should use correct base and don't
count on auto-detect. For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong. Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.
PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The number of vCPUs for a guest must be between 1 and the
maximum value configured in the domain XML. This commit
introduces checks to make sure that passing count <= 0
results in an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248277
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The condition checking whether --format was specified was incorrect.
virsh crashed if the following format was used:
virsh dump VM dump --format '' --memory-only
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1272301
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When looking up a domain, we try to look up by ID, UUID and NAME
consequently while not really caring which of those lookups succeeds.
The problem is that if any of them fails, we dispatch the error from the
driver and that means setting both threadlocal and global error. Let's
say the last lookup (by NAME) succeeds and resets the threadlocal error as any
other API does, however leaving the global error unchanged. If the underlying
virsh command does not succeed afterwards, our cleanup routine in
vshCommandRun ensures that no libvirt error will be forgotten and that's
exactly where this global error comes in incorrectly.
# virsh domif-setlink 123 vnet1 up
error: interface (target: vnet1) not found
error: Domain not found: no domain with matching id 123
This patch also resets the global error which would otherwise cause some
minor confusion in reported error messages.
https://bugzilla.redhat.com/show_bug.cgi?id=1254152
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This patch implements new virsh command, domrename.
Using domrename, it will be possible to rename domain from the virsh shell by
calling virRenameDomain API.
It takes two arguments, current domain name and new domain name.
Example:
virsh # list --all
Id Name State
----------------------------------------------------
- bar shut off
virsh # domrename bar foo
Domain successfully renamed
virsh # list --all
Id Name State
----------------------------------------------------
- foo shut off
virsh #
Signed-off-by: Tomas Meszaros <exo@tty.sk>
In my previous commit d7f5c88961 I tried to introduce support
for inbound.floor. But the code change was incomplete. This is
the change needed to fully enable the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6983d6d2 tried to improve parseRateStr but broke the build
instead for compilers that were not able to properly introspect the for
loop indexed by the enum resulting into the following error:
virsh-domain.c: In function 'parseRateStr':
virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
vshError(ctl, _("malformed %s field"), field_name);
^
virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
^
Rather than trying to fix the code, refactor the function again by
reusing virStringSplit.
We have a function parseRateStr() that parses --inbound and
--outbound arguments to both attach-interface and domiftune.
Now that we have all virTypedParams macros needed for QoS,
lets parse even floor attribute. The extended format for the
arguments looks like this then:
--inbound average[,peak[,burst[,floor]]]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to parse a tuple delimited by commas into
virNetDevBandwidth structure. So far only three out of fore
fields are supported: average, peak and burst. The single missing
field is floor. Well, the parsing works, but I think we can do
better. Especially when we will need to parse floor too in very
close future.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250287
When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reuse the vshBlockJobWait infrastructure to refactor cmdBlockCommit to
use the common code. This additionally fixes a bug when working with
new qemus, where when doing an active commit with --pivot the pivoting
would fail, since qemu reaches 100% completion but the job doesn't
switch to synchronized phase right away.
Introduce helper function that will provide logic for waiting for block
job completion so the 3 open coded places can be unified and improved.
This patch introduces the whole logic and uses it to fix
cmdBlockJobPull. The vshBlockJobWait function provides common logic for
block job waiting that should be robust enough to work across all
previous versions of libvirt. Since virsh allows passing user-provided
strings as paths of block devices we can't reliably use block job events
for detection of block job states so the function contains a great deal
of fallback logic.
Use the VSH_EXCLUSIVE_OPTIONS to exclude combinations of --pivot and
--keep-overlay and refactor the enforcing of the --wait option and other
flags that imply --wait.
Use the VSH_EXCLUSIVE_OPTIONS_VAR to interlock incompatible options.
Since a variable named 'abort' would conflict with older compilers use
VSH_EXCLUSIVE_OPTIONS for the --abort option.
There's this condition:
flags & VIR_DOMAIN_AFFECT_CURRENT && virDomainIsActive(dom)
which can never be true since VIR_DOMAIN_AFFECT_CURRENT has hardcoded
value of zero. Therefore virDomainIsActive() is a dead code. However,
the condition could make sense if it is rewritten as the following:
!(flags & VIR_DOMAIN_AFFECT_CONFIG) && virDomainIsActive(dom)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '81dd81e' caused a regression when attempting to print a
specific vcpuid that is out of the range of the maximum vcpus for
the guest, such as:
$ virsh vcpupin $dom 1000
VCPU: CPU Affinity
----------------------------------
$
Rather than just recover the old message, let's adjust the message based
on what would be displayed for a similar failure in the set path, such as:
$ virsh vcpupin $dom 1000
error: vcpu 1000 is out of range of persistent cpu count 2
$ virsh vcpupin $dom 1000 --live
error: vcpu 1000 is out of range of live cpu count 2
$
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
When the block job would fail while watching it using the "--wait"
option for blockcopy, virsh would rather unhelpfully report:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait
Now in mirroring phase
Add a special case when the block job vanishes while waiting for it to
finish to improve the message:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait
error: Block Copy unexpectedly failed
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When watching a job (save, managedsave, dump, migrate) virsh spawns a
thread to call the appropriate API and waits for the result while
watching for interruption signals (SIGINT, Ctrl-C on the terminal).
Whenever such signal is caught, virsh calls virDomainAbortJob, stops
waiting for the job, and returns the result of virDomainAbortJob.
This is wrong because the job might have finished in the meantime or it
might have been cancelled by someone else and virsh would just report
the failure to abort the job. However, we are not interested in the
virDomainAbortJob's result at all, we need to keep waiting for the main
job to finish and report its result instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1131755
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
When parsing a cpulist, the virBitmapParse is used. On an invalid
bitmap an error is reported, but the error gets cleared
immediately by subsequent public APIs call, e.g. virDomainFree().
Moreover, we don't check whether bitmap fits into maximal CPU ID
on the host. Therefore the following examples failed without any
error:
# virsh vcpupin test3 1 aaa
# virsh vcpupin test3 1 1000
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The --maximum option wasn't properly parsed and the equivalent flag
wasn't set. Fix this bug and also rewrite the way we check this option
by using new macro. The new approach is that --maximum requires
--config, no other combination is allowed, because they don't make sense.
The new error will be:
# virsh setvcpus test --maximum 10
error: Option --config is required by option --maximum
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1204033
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1161617
Add command to allow adding and removing IOThreads from the domain including
the configuration and live domain.
$ virsh iothreadadd --help
NAME
iothreadadd - add an IOThread to the guest domain
SYNOPSIS
iothreadadd <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Add an IOThread to the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread for the new IOThread
--config affect next boot
--live affect running domain
--current affect current domain
$ virsh iothreaddel --help
NAME
iothreaddel - delete an IOThread from the guest domain
SYNOPSIS
iothreaddel <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Delete an IOThread from the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread_id for the IOThread to delete
--config affect next boot
--live affect running domain
--current affect current domain
Assuming a running $dom with multiple IOThreads assigned and that
that the $dom has disks assigned to IOThread 1 and IOThread 2:
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 1
error: invalid argument: an IOThread is already using iothread_id '1' in iothreadpids
$ virsh iothreadadd $dom 1 --config
error: invalid argument: an IOThread is already using iothread_id '1' in persistent iothreadids
$ virsh iothreadadd $dom 4
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 4 --config
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
Assuming the same original configuration
$ virsh iothreaddel $dom 1
error: invalid argument: cannot remove IOThread 1 since it is being used by disk 'vde'
$ virsh iothreaddel $dom 3
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:
$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option
and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one). This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).
In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.
So this is a case of regression fixing by pure code deletion :)
* tools/virsh-domain.c (vshCommandOptDomainBy): Drop useless filter.
* tools/virsh-interface.c (vshCommandOptInterfaceBy): Likewise.
* tools/virsh-network.c (vshCommandOptNetworkBy): Likewise.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh.h (vshCmdHasOption): Drop unused function.
* tools/virsh.c (vshCmdHasOption): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When set guest memory with a invalid parameter of --soft-limit,
it posts weird error:
$ virsh memtune r7 --hard-limit 20417224 --soft-limit 9007199254740992 \
--swap-hard-limit 35417224
error: Unable to parse integer parameter 'NAME
Change it to
error: Unable to parse integer parameter soft-limit
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211550
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use virBitmapDataToString instead of constructing the ranges bit
by bit, remove the checking of parameters (that is already done
by the callers).
Let the callers choose the right bitmap, since there's only
one that uses this helper on a matrix-in-an-array.
$ sudo virsh change-media f19 hdc /mnt/data/devel/media/Fedora-16-x86_64-Live-KDE.iso
succeeded to complete action update on media
Change the message to:
Successfully {inserted,ejected,changed} media.
https://bugzilla.redhat.com/show_bug.cgi?id=967946
The overflow check for the bandwidth parameter did not jump to the
cleanup label.
Additionally virsh should use vshError instead of virReportError.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206987
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The command did not modify the disk type and thus didn't allow to change
media from a file image to a block backed image or vice versa. In
addition when operating on a network backed removable devices the
command would replace the while <source> subelement with an invalid one.
This patch adds the --block option that allows to specify that the new
image is block backed and assumes that without that option all images
are file backed. Since network backends were always mangled it should
not cause problems.
Since cmdDetachDisk() calls into vshPrepareDiskXML() with
type == VSH_PREPARE_DISK_XML_NONE && source == NULL this would result
into skipping all the checks and effectively turn the function into a
XML formatter.
This patch changes the code to use the formatter directly so that the
function can be refactored in a easier way.
Commit f182da20 (v1.2.6) caused a slight regression in virsh
reporting of a non-active block job; where it used to state
"Commit complete", it now states "Now in synchronized phase".
But the synchronized phase is only possible for an active commit.
For a reproducer, I created a chain 'a <- b <- c <- d <- e' and
ran virsh blockcommit $dom vda --top c --base a --verbose --wait
* tools/virsh-domain.c (cmdBlockCommit): Synchronized phase is
only possible on active commits.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
$ virsh iothread --help
NAME
iothreadpin - control domain IOThread affinity
SYNOPSIS
iothreadpin <domain> <iothread> <cpulist> [--config] [--live] [--current]
DESCRIPTION
Pin domain IOThreads to host physical CPUs.
OPTIONS
[--domain] <string> domain name, id or uuid
[--iothread] <number> IOThread ID number
[--cpulist] <string> host cpu number(s) to set
--config affect next boot
--live affect running domain
--current affect current domain
Using the output from iothreadsinfo, allow changing the pinned CPUs for
a single IOThread.
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadpin $dom 3 0-2
Then view the change
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-2
If an invalid value is supplied or require option missing,
then an error will be displayed:
$ virsh iothreadpin $dom 4 3
error: invalid argument: iothread value out of range 4 > 3
$ virsh iothreadpin $dom 3
error: command 'iothreadpin' requires <cpulist> option
Add the 'iothreadsinfo' command to display IOThread Info data. Allow for
[--live] or [--config] options in order to display live or config data
for an active domain.
$ virsh iothreadsinfo --help
NAME
iothreadsinfo - view domain IOThreads
SYNOPSIS
iothreadsinfo <domain> [--config] [--live] [--current]
DESCRIPTION
Returns basic information about the domain IOThreads.
OPTIONS
[--domain] <string> domain name, id or uuid
--config affect next boot
--live affect running domain
--current affect current domain
An active domain may return:
$ virsh iothreads $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0
$ echo $?
0
For domains which don't have IOThreads the following is returned:
$ virsh iothreads $dom
No IOThreads found for the domain
$ echo $?
0
For domains which are not running the following is returned:
$ virsh iothreads $dom --live
error: Unable to get domain IOThreads information
error: Requested operation is not valid: domain is not running
$ echo $?
1
Editing a domains configuration and modifying the iothreadpin data for
thread 3 from nothing provided to setting a cpuset of '0-1' and then
displaying using --config would display:
$ virsh iothreads f18iothr --config
IOThread ID CPU Affinity
----------------------------
1 2
2 3
3 0-1
$
Signed-off-by: John Ferlan <jferlan@redhat.com>
Fix vshMemtuneGetSize to return correct value. We can then decide
according that return code whether a parameter is present and valid or
not. This will allow as to accept 0 as a valid value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The "virDomainGetInfo" will get for running domain only live info and for
offline domain only config info. There was no way how to get config info
for running domain. We will use "vshCPUCountCollect" instead to get the
correct cpu count that we need to pass to "virDomainGetVcpuPinInfo".
Also cleanup some unnecessary variables and checks that are done by
drivers.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1160559
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When editing a domain with 'virsh edit' and failing validation, the
usual message pops up:
Failed. Try again? [y,n,f,?]:
Turning off validation can be useful, mainly for testing (but other
purposes too), so this patch adds support for relaxing definition in
virsh-edit and makes 'virsh edit <domain>' more usable.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our hotplug code supports macvtap insertion to guests. However, we
somehow forgot about 'attach-interface' (which tries to build XML from
passed arguments and use virDomainAttachDeviceFlags()).
New type is accessible under 'direct' type, to keep the same type as
used in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of verbose string to enum conversion (if STREQ() else if
STREQ() else if STREQ() ...) lets use virDomainNetType{From,To}String.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The type of interface to attach is held in the variable 'typ'.
Depending on interface type selected by user, the variable is set
either to 1 (network), or 2 (bridge). Lets use already existing
enum from domain_conf.h instead: virDomainNetType.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1191016
virsh's domdisplay command looks in /domain/devices/graphics/@listen
of the domain's XML for the listen address, however for listen
type='network' (added in libvirt 0.9.4), the <graphics> element
doesn't have a listen attribute, but has a <listen> subelement,
*still* with no address (this is the inactive XML):
<graphics type='spice' autoport='yes' keymap='en-us'>
<listen type='network' network='default'/>
</graphics>
However, at domain start time the <listen> subelement gets its address
attribute filled in once libvirt figures out the IP address associated
with the named network (this is the status XML):
<graphics type='spice' port='5901' autoport='yes' keymap='en-us'>
<listen type='network' address='192.168.122.1' network='default'/>
</graphics>
So in these cases, we need to look at
/domain/devices/graphics/listen/@address instead.
Even though another patch is being pushed that will backfill
listen/@address into @listen, this patch is still useful, as it fixes
domdisplay for cases of a new virsh (with this patch) connecting to a
libvirtd that is newer than 0.9.4 but doesn't have the followup patch.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
Adding ccw bus address support to the optional address parameter of virsh
attach-disk. The format used is ccw:cssid. ssid.devno, e.g.
ccw:0xfe.0x0.0x0201
Virtio-ccw devices must have their cssid set to 0xfe.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The 'virsh edit' command gets XML validation enabled by default,
with a --skip-validate option to disable it. The 'virsh define'
and 'virsh create' commands get a --validate option to enable
it, to avoid regressions for existing scripts.
The quality of error reporting from libxml2 varies depending
on the type of XML error made. Sometimes it is quite clear
and useful, other times it is obscure & inaccurate. At least
the user will see an error now, rather than having their
XML modification silently disappear.
Commit 6b9964 enforces checking invalid use of VSH_OT_STRING with
VSH_OFLAG_REQ. This commit tries to do the same thing to stop using
VSH_OT_DATA without VSH_OFLAG_REQ and also fix existing misuse.
Signed-off-by: Hao Liu <hliu@redhat.com>
Add a "domfsinfo" command that shows a list of filesystems info mounted in
the guest. For example:
virsh # domfsinfo vm1
Mountpoint Name Type Target
-------------------------------------------------------------------
/ sda1 ext4 hdc
/opt dm-2 vfat vda,vdb
/mnt/test sdb1 xfs sda
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
On 32-bit platforms with old gcc (hello RHEL 5 gcc 4.1.2), the
build fails with:
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2172: warning: comparison is always false due to limited range of data type
Adjust the code to silence the warning.
* tools/virsh-domain.c (cmdBlockCopy): Pacify RHEL 5 gcc.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a block{pull, copy, commit} is aborted via keyboard interrupt,
the job is properly canceled followed by proper error message.
However, when the job receives an abort from another client connected
to the same domain, the error message incorrectly indicates that
a blockjob has been finished successfully, though the abort request
took effect. This patch introduces a new blockjob abort handler, which
is registered when the client calls block{copy,commit,pull} routine,
providing its caller the status of the finished blockjob.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135442
I noticed this while working on qemuDomainGetBlockInfo. Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.
* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
According to comments in parsing functions, optional options should be
specified *after* required ones. It makes sense and help output looks
cleaner. The only exceptions are options with type == VSH_OT_ARGV.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch fixes the following issues.
1) When an invalid wwn is introduced, libvirt reports
"Malformed wwn: %s". The template won't be replaced.
2) "target" option for dompmsuspend and "xml" option for
save-image-define are required options and should use
VSH_OT_DATA instead of VSH_OT_STRING as an option type.
3) A typo.
Signed-off-by: Hao Liu <hliu@redhat.com>
Bandwidth options in blockcommit, blockcopy, blockjob and blockpull
are parsed by vshCommandOptULWrap() and should be shown as a number
type option.
And a typo is fixed.
Signed-off-by: Hao Liu <hliu@redhat.com>
C guarantees that static variables are zero-initialized. Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.
* tools/virsh-console.c (got_signal): Drop unused variable.
* tools/virsh-domain.c: Fix initialization.
* tools/virsh.c: Likewise.
* tools/virt-host-validate-common.c (virHostMsgWantEscape):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When starting an active block commit job in virsh, it will report
"Block Commit started", but for more precise message it could
report "Active Block Commit started".
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Few places still used hardcoded limit for maximum XML size for commands
that accept XML files. The hardcoded limits ranged from 8k to 1M. Use
VSH_MAX_XML_FILE to express this limit in a unified way. This will bump
the limit for the commands that used hardcoded string lengths to 10M.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1152427
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add an iothread parameter to allow attaching to an IOThread, such as:
virsh attach-disk $dom $source $target --live --config --iothread 2 \
--targetbus virtio --driver qemu --subdriver raw --type disk
Coverity complains that on the first pass through the for loop that
'params' cannot be true, thus the ternary setting to "&" cannot be
done. Since we can only ever get to this point once, drop the ternary
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity notes that after we VIR_ALLOC_N(params, nparams) a failed call to
virDomainGetCPUStats could result in nparams being set to -1. In that case,
the subsequent virTypedParamsFree in cleanup will pass -1 which isn't good.
Use the returned value as the number of stats to display in the loop as
it will be the value reported from the hypervisor and may be less than
nparams which is OK
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity points out that if 'dom' isn't returned from virDomainQemuAttach,
then the code already jumps to cleanup, so there was no need for the
subsequent if (dom != NULL) check.
I moved the error message about failure into the goto cleanup on failure
and then removed the if (dom != NULL)
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since 0766783abb
Coverity complains that the EDIT_FREE definition results in DEADCODE.
As it turns out with the change to use the EDIT_FREE macro the call to
vir*Free() wouldn't be necessary nor would it happen...
Prior code to above commitid would :
vir*Ptr foo = NULL;
...
foo = vir*GetXMLDesc()
...
vir*Free(foo);
foo = vir*DefineXML()
...
And thus the free was needed. With the change to use EDIT_FREE the
same code changed to:
vir*Ptr foo = NULL;
vir*Ptr foo_edited = NULL;
...
foo = vir*GetXMLDesc()
...
if (foo_edited)
vir*Free(foo_edited);
foo_edited = vir*DefineXML()
...
However, foo_edited could never be set in the code path - even with
all the goto's since the only way for it to be set is if vir*DefineXML()
succeeds in which case the code to allow a retry (and thus all the goto's)
never leaves foo_edited set
All error paths lead to "cleanup:" which causes both foo and foo_edited
to call the respective vir*Free() routines if set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Tweak the messages so that they mention "title" rather than
"description" when operating in title mode. Also fixes one missing "%s"
before non-formatted gettext message.
Before:
$ virsh desc --title dom
No description for domain: dom
After:
$ virsh desc --title dom
No title for domain: dom
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140034
Commit c1d75de caused this warning on 32-bit platforms (fatal when
-Werror is enabled):
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2003:17: error: comparison is always false due to limited range of data type [-Werror=type-limits]
Forcing the left side of the < to be ull instead of ul shuts up
the 32-bit compiler while still protecting 64-bit code from overflow.
* tools/virsh-domain.c (cmdBlockCopy): Add type coercion.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new power of virDomainBlockCopy through virsh (well,
all but the finer-grained bandwidth, as that is its own can of
worms for a later patch). Continue to use the older API where
possible, for maximum compatibility.
The command now requires either --dest (with optional --format
and --blockdev), to directly describe the file destination, or
--xml, to name a file that contains an XML description such as:
<disk type='network'>
<driver type='raw'/>
<source protocol='gluster' name='vol1/img'>
<host name='red'/>
</source>
</disk>
[well, it may be a while before the qemu driver is actually patched
to act on that particular xml beyond just parsing it, but the virsh
interface won't need changing at that time]
Non-zero option parameters are converted into virTypedParameters,
and if anything requires the new API, the command can synthesize
appropriate XML even if the --dest option was used instead of --xml.
The existing --raw flag remains for back-compat, but the preferred
spelling is now --format=raw, since the new API now allows us
to specify all formats rather than just a boolean raw to suppress
probing.
I hope I did justice in describing the effects of granularity and
buf-size on how they get passed through to qemu.
* tools/virsh-domain.c (cmdBlockCopy): Add new options --xml,
--granularity, --buf-size, --format. Make --raw an alias for
--format=raw. Call new API if new parameters are in use.
* tools/virsh.pod (blockcopy): Document new options.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to extend the capabilities of blockcopy. Hiding a few
common lines of implementation gets in the way of the new required
logic, and putting the new logic in the common implementation won't
benefit any of the other blockjob operations. Therefore, it is
simpler to just do the work inline. There should be no semantic
change in this patch.
* tools/virsh-domain.c (blockJobImpl): Move block copy guts...
(cmdBlockCopy): ...into their lone caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new flag just added to virDomainGetBlockJobInfo.
With --raw, the presence or absence of --bytes determines which
flag to use in the single API call. Without --raw, the use of
--bytes forces an error if the server doesn't support it,
otherwise, the code tries to silently fall back to scaling the
MiB/s value.
My goal is to eventually also support --bytes in bandwidth mode;
but that's a bit further down the road (and needs a new API flag
added in libvirt.h first).
This changes the human output, but the previous patch added
raw output precisely so that we can have flexibility with the
human output. For this commit, I used qemu-monitor-command to
force an unusual bandwidth, but the same will be possible once
qemu implements virDomainBlockCopy:
Before:
Block Copy: [100 %] Bandwidth limit: 2 MiB/s
After:
Block Copy: [100 %] Bandwidth limit: 1048577 bytes/s (1.000 MiB/s)
The cache avoids having to repeatedly checking whether the flag
works when talking to an older server, when multiple blockjob
commands are issued during a batch session and the user is
manually polling for job completion.
* tools/virsh.h (_vshControl): Add a cache.
* tools/virsh.c (cmdConnect, vshReconnect): Initialize the cache.
* tools/virsh-domain.c (opts_block_job): Add --bytes.
* tools/virsh.pod (blockjob): Document this.
Signed-off-by: Eric Blake <eblake@redhat.com>
The current output of 'blockjob [--info]' is a single line
designed for human consumption; it's not very nice for machine
parsing. Furthermore, I have plans to modify the line in
response to the new flag for controlling bandwidth units.
Solve that by adding a --raw parameter, which outputs
information closer to the C struct.
$ virsh blockjob testvm1 vda --raw
type=Block Copy
bandwidth=1
cur=197120
end=197120
The information is indented, because I'd like for a later patch
to add a mode that iterates over all the vm's disks with status
for each; in that mode, each block name would be listed unindented
before information (if any) about that block.
Now that we have a raw mode, we can guarantee that it won't change
format over time. Any app that cares about parsing the output can
try --raw, and if it fails, know that it was talking to an older
virsh and fall back to parsing the human-readable format which had
not changed until now; meanwhile, when not using --raw, we have
freed future virsh to change the output to whatever makes sense.
My first change to human mode: this command now guarantees a line
is printed on successful use of the API, even when the API did
not find a current block job (consistent with the rest of virsh).
Bonus: https://bugzilla.redhat.com/show_bug.cgi?id=1135441
complained that this message was confusing:
$ virsh blockjob test1 hda --async --bandwidth 10
error: conflict between --abort, --info, and --bandwidth modes
even though the man page already documents that --async implies
abort mode, all because '--abort' wasn't present in the command
line. Since I'm adding another case where options are tied
to or imply a mode, I changed that error to:
error: conflict between abort, info, and bandwidth modes
* tools/virsh-domain.c (cmdBlockJob): Add --raw parameter; tweak
error wording.
* tools/virsh.pod (blockjob): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I have plans to make future enhancements to the job list mode,
which will be easier to do if the common blockJobImpl function
is not mixing a query command with multiple modify commands.
Besides, it just feels weird that all callers to blockJobImpl
had to supply both a bandwidth input argument (unused for info
mode) and an info output argument (unused for all other modes);
not to mention I just made similar cleanups on the libvirtd
side.
The only reason blockJobImpl returned int was because of info
mode returning -1/0/1 (all other job API are -1/0), so that
can also be cleaned up. No user-visible changes in this commit.
* tools/virsh-domain.c (blockJobImpl): Change signature and return
value. Drop info handling.
(cmdBlockJob): Handle info here.
(cmdBlockCommit, cmdBlockCopy, cmdBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
While prepping for virDomainBlockJob patches, I found some dead code.
* tools/virsh-domain.c (blockJobImpl): Kill unused 'name'.
Signed-off-by: Eric Blake <eblake@redhat.com>
A possible fix to issue:
http://www.redhat.com/archives/libvir-list/2014-August/thread.html#00227
While doing migration on KVM host, found problem sometimes:
VM is already running on the target host and disappears from source
host, but 'virsh migrate' command line hangs, cannot exit normally.
If pressing "ENTER" key, it will exit.
The code hangs at tools/virsh-domain.c: cmdMigrate
->vshWatchJob->poll():
poll() is trying to select pipe_fd, which is used to receive message
from doMigrate thread. In debugging, found that doMigrate finishes
and at the end it does call safewrite() to write the retval ('0' or
'1') to pipe_fd, and the write is completed. But cmdMigrate poll()
cannot get the event. If pressing "ENTER" key, poll() can get the
event and select pipe_fd, then command line can exit.
In current code, authentication thread which is called by vshConnect
will use stdin, and at the same time, in cmdMigrate main process,
poll() is listening to stdin, that probably affect poll() to get
pipe_fd event. Better to move authentication before vshWatchJob. With
this change, above problem does not exist.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
We parse the bandwidth rates as unsinged long long,
then try to fit them in VIR_TYPED_PARAM_UINT.
Report an error if they exceed UINT_MAX instead of
quietly using wrong values.
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.
There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the code, 'virsh numatune' supports integers for
specifying --mode as well as the string definitions "strict",
"interleave", and "preferred". However, this possibility was not
documented anywhere, so this patch adds it to both the man page and
command help.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1085706
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce flag for the block rebase API to allow the rebase operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Introduce flag for the block commit API to allow the commit operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Similary to cmdDetachDisk fetch the inactive definition when --config
is specified as the active may not contain the network interface
if it was plugged with --config.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056902
By default, the bus type is inferred from the style of the device
name('target' in this command), e.g. a device named 'sda' will
typically be exported using a SCSI bus. Actually, not only SCSI bus,
but USB/SATA bus also use this kind of device name. So add '--bus'
option for attach-disk command to allow user specify the target bus.
Signed-off-by: Yanbing Du <ydu@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add knobs to virsh to manage a 2-phase active commit of the top
layer, similar to knobs already present on blockcopy. While this
code will fail until later patches actually implement the new
knobs in the qemu driver, doing it now proves that the API is
usable and also makes it easier for testing the qemu changes as
they are made.
* tools/virsh-domain.c (cmdBlockCommit): Add --active, --pivot,
and --keep-overlay options, modeled after blockcopy.
(blockJobImpl): Support --active flag.
* tools/virsh.pod (blockcommit): Document new flags.
(blockjob): Mention 2-phase commit interaction.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Peter's review of an early version of my addition of active block
commit pointed out some issues that I was copying from the block
copy code; fix them up now before perpetuating them.
For virsh commands that manage a single API call, it's nice to have
a 1:1 mapping of options to flags, so that we can test that
lower-layer software handles flag combinations correctly. But where
virsh is introducing syntactic sugar to combine multiple API calls
into a single user interface, we might as well make that interface
compact. That is, we should allow the shorter command-line of
'blockcopy $dom $disk --pivot' without having to explicitly specify
--wait, because this isn't directly a flag passed to a single
underlying API call.
Also, my use of embedded ?: ternaries bordered on unreadable.
* tools/virsh-domain.c (cmdBlockCopy): Make --pivot, --finish,
and --timeout imply --wait. Drop excess ?: operators.
* tools/virsh.pod (blockcopy): Update documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
The vcpupin command allowed specifying a negative number for the --vcpu
argument. This would the overflow when the underlying virDomainPinVcpu
API was called.
$ virsh vcpupin r7 -1 0
error: numerical overflow: input too large: 4294967295
Switch the vCPU variable to a unsigned int and parse it using the
corresponding function.
Also improve the vcpupin test to cover all the defects.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101059
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the two bandwidth functions that use this helper introduce
vshCommandOptULWrap. Although currently the migrate-setspeed function
for the qemu driver will reject -1 as maximum.
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.
Stepping back a bit, there are two valid semantics for a
commit operation:
1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.
2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.
Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job. However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.
This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics. It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML. Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.
Signed-off-by: Eric Blake <eblake@redhat.com>
Report CPU affinities / online CPUs in human-readable form when
this flag is present:
Before:
CPU Affinity: y-yy
After:
CPU Affinity: 0,2-3 (out of 4)
https://bugzilla.redhat.com/show_bug.cgi?id=985980
For now, if only '--wipe-storage' is assigned, user can undefine a
domain normally. But actually '--wipe-storage' doesn't do anything,
and this may confuse user. Better is to require that '--wipe-storage'
only works if the user specifies volumes to be removed.
Before:
$ virsh undefine virt-tests-vm1 --wipe-storage
Domain virt-tests-vm1 has been undefined
After:
$ virsh undefine virt-tests-vm1 --wipe-storage
error: '--wipe-storage' requires '--storage <string>' or '--remove-all-storage'
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 9976c4b9a6 broke the output for VNC
displays as the port number is converted to VNC display number by
subtracting 5900. This yields port 0 for the first display and thus the
output would be skipped.
Before:
$ virsh domdisplay VM
vnc://localhost
After:
$ tools/virsh domdisplay VM
vnc://localhost:0
'virsh help event' included a summary line "event - (null)"
due to a misnamed info field.
* tools/virsh-domain.c (info_event): Use correct name.
* tools/virsh-network.c (info_network_event): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds "[--format] <string>" to "virsh dump --memory-only", which is
changed to use the new virDomainCoreDumpWithFormat API.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.
Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.
This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When listening for a subset of monitor events, it can be tedious
to register for each event name in series; nicer is to register
for multiple events in one go. Implement a flag to use regex
interpretation of the event filter.
While at it, prove how much I hate the shift key, by adding a
way to filter for 'shutdown' instead of 'SHUTDOWN'. :)
* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventRegisterFlags): New enum.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister):
Document flags.
* tools/virsh-domain.c (cmdQemuMonitorEvent): Expose them.
* tools/virsh.pod (qemu-monitor-event): Document this.
* src/conf/domain_event.c
(virDomainQemuMonitorEventStateRegisterID): Add flags.
(virDomainQemuMonitorEventFilter): Handle regex, and optimize
client side.
(virDomainQemuMonitorEventCleanup): Clean up regex.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any new API deserves a good virsh wrapper :)
qemu-monitor-event [<domain>] [<event>] [--pretty] [--loop] [--timeout <number>]
Very similar to the previous work on 'virsh event'. For an
example session:
$ virsh -c qemu:///system qemu-monitor-event --event SHUTDOWN&
$ virsh -c qemu:///system start f18-live
Domain f18-live started
$ virsh -c qemu:///system destroy f18-live
Domain f18-live destroyed
event SHUTDOWN at 1391212552.026544 for domain f18-live: (null)
events received: 1
[1]+ Done virsh -c qemu:///system qemu-monitor-event --event SHUTDOWN
$
* tools/virsh-domain.c (cmdQemuMonitorEvent): New command.
* tools/virsh.pod (qemu-monitor-event): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
