Commit Graph

1591 Commits

Author SHA1 Message Date
Eric Blake
4f596a070d conf: move storage formats to common RNG file
We had incomplete RelaxNG support for storage formats listed
in virstoragefile.h: commit 027bf2e added 'vdi' but forgot
to update the <volume> and <domain> xml lists; the <volume>
list was also missing 'fat' and 'vhd'.  Maintaining two lists
is a recipe for them getting out of sync, so make the list
common so that both contexts benefit the next time we add a
format in a single location.

* docs/schemas/domaincommon.rng (storageFormat): Move...
* docs/schemas/storagecommon.rng: ...here, and add vdi.
* docs/schemas/storagevol.rng (formatfile): Use common list.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-15 13:15:11 +02:00
Eric Blake
a9efe2d70c conf: better <disk> interleaving in schema
In general, we try to make virt-xml-validate tolerant of input
elements in any order when possible.  However, as written, the
RNG grammar did not permit <source> unless there was an explicit
type= attribute (even though the C code manages just fine by
defaulting to type='file').  After making the attribute optional
on the 'file' branch, I noticed that the use of diskspec was now
redundant with the branch when no <source> was supplied.

View this patch with 'git diff -b' for a better picture of the
schema change.

* docs/schemas/domaincommon.rng (disk): Hoist 'diskspec' out of
choice, make type='file' default, and still preserve interleave.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-source-pool.xml:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Reorder XML.
* tests/qemuxml2xmltest.c (mymain): Cover new files.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-15 11:45:02 +02:00
Eric Blake
110c0db88c conf: create common storage RNG grammar file
Having two tiny files with a couple definitions didn't make
as much sense as one common file, especially since I plan to
add more definitions and use it in more places.

* docs/schemas/storageencryption.rng: Merge this...
* docs/schemas/storagefilefeatures.rng: ...and this, into...
* docs/schemas/storagecommon.rng: ...this new file.
* docs/schemas/Makefile.am (schema_DATA): Reflect renames.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/domaincommon.rng: Likewise.
* libvirt.spec.in: Likewise.
* mingw-libvirt.spec.in: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-14 07:07:01 -06:00
Daniel Veillard
c53663ccdb Release of libvirt-1.2.3
* docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: pull updated translations and regenerate
2014-04-01 15:29:53 +08:00
Peter Krempa
0f6c50b9b6 gluster: Fix "key" attribute for gluster volumes
According to our documentation the "key" value has the following
meaning: "Providing an identifier for the volume which identifies a
single volume." The currently used keys for gluster volumes consist of
the gluster volume name and file path. This can't be considered unique
as a different storage server can serve a volume with the same name.

Unfortunately I wasn't able to figure out a way to retrieve the gluster
volume UUID which would avoid the possibility of having two distinct
keys identifying a single volume.

Use the full URI as the key for the volume to avoid the more critical
ambiguity problem and document the possible change to UUID.
2014-04-01 08:44:34 +02:00
Hongwei Bi
b2ed4f68b4 util: fix a typo in virprocess.c and docs
s/forcably/forcibly

Signed-off-by: Hongwei Bi <hwbi2008@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-27 06:58:46 -06:00
Jean-Baptiste Rouault
03c96787c2 docs: cgroups: fix typo about LXC cgroups 2014-03-27 06:52:20 -06:00
Francesco Romani
85a3eb8a6d qemu: export disk snapshot support in capabilities
This patch adds an element to QEMU's capability XML, to
show if the underlying QEMU binary supports the live disk
snapshotting or not.
This allows any client to know ahead of time if the feature
is available.

Without this information available, the only way to check
for the snapshot support is to request one and check for
errors.

Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-03-26 13:41:25 +01:00
Ján Tomko
9af14dadf6 Add a rule for indenting labels
Indent top-level labels by one space.

Add the rule to HACKING and enforce it by syntax-check.
2014-03-25 14:58:41 +01:00
Martin Kletzander
95aed7febc Use K&R style for curly braces in remaining files
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-20 17:27:17 +01:00
Daniel P. Berrange
c0c8c1d7bb Remove global log buffer feature entirely
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.

The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Stefan Berger
a81756f1ff nwfilter: Add ARP src/dst IP mask for ebtables ARP
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=862887

Add a netmask for the source and destination IP address for the
ebtables --arp-ip-src and --arp-ip-dst options. Extend the XML
parser with support for XML attributes for these netmasks similar
to already supported netmasks. Extend the documentation.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2014-03-13 18:30:09 -04:00
Martin Kletzander
55d444bc01 docs: add VMmanager to web apps
This is a request for adding a VMmanager application as requested and
described by Ksenya Phil.

Signed-off-by: Ksenya Phil <philka2003@mail.ru>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-13 06:54:56 +01:00
Chunyan Liu
98c5c53d69 add hostdev pci backend type for xen
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as
stub driver.
2014-03-12 17:03:23 +00:00
Peter Krempa
aa50a5c727 doc: storage: Explicitly state that it's possible to have non-unique key
With most of our storage backends it's possible to have two separate
volume keys to point to a single volume. (By creating sym/hard-links to
local files or by mounting remote filesystems to two different locations
and creating pools on top of them) Document this possibility.
2014-03-05 09:51:24 +01:00
Eric Blake
b9dd878ff8 util: make it easier to grab only regular command exit
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations.  Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit.  Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big.  And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.

So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.

* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-03 12:40:32 -07:00
Roman Bogorodskiy
da78406e64 docs: typo fix
* drvuml.html.in: (connected) s/toa PTY/to a PTY/
2014-03-03 17:41:26 +04:00
Daniel P. Berrange
36ff4ed1ec Generate a unique journald log for QEMU capabilities failure
When probing QEMU capabilities fails for a binary generate a
log message with MESSAGE_ID==8ae2f3fb-2dbe-498e-8fbd-012d40afa361.

This can be directly queried from journald based on the UUID
instead of needing string grep. This lets tools like libguestfs'
bug reporting tool trivially do automated sanity tests on the
host they're running on.

 $ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361
 Feb 21 17:11:01 localhost.localdomain lt-libvirtd[9196]:
 Failed to probe capabilities for /bin/qemu-system-alpha:
 internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=
 /home/berrange/src/virt/libvirt/src/.libs PATH=/usr/lib64/
 ccache:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:
 /usr/bin:/root/bin HOME=/root USER=root LOGNAME=root
 /bin/qemu-system-alpha -help) unexpected exit status 127:
 /bin/qemu-system-alpha: error while loading shared libraries:
 libglapi.so.0: cannot open shared object file: No such file
 or directory

 $ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361 --output=json
 { ...snip...
  "LIBVIRT_SOURCE" : "file",
  "PRIORITY" : "3",
  "CODE_FILE" : "qemu/qemu_capabilities.c",
  "CODE_LINE" : "2770",
  "CODE_FUNC" : "virQEMUCapsLogProbeFailure",
  "MESSAGE_ID" : "8ae2f3fb-2dbe-498e-8fbd-012d40afa361",
  "LIBVIRT_QEMU_BINARY" : "/bin/qemu-system-xtensa",
  "MESSAGE" : "Failed to probe capabilities for /bin/qemu-system-xtensa:
   internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=/home/berrange
   /src/virt/libvirt/src/.libs PATH=/usr/lib64/ccache:/usr/local/sbin:
   /usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin HOME=/root
   USER=root LOGNAME=root /bin/qemu-system-xtensa -help) unexpected
   exit status 127: /bin/qemu-system-xtensa: error while loading shared
   libraries: libglapi.so.0: cannot open shared object file: No such
    file or directory\n" }

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-03 11:42:37 +00:00
Daniel Veillard
e8684eb541 Release of libvirt-1.2.2
- docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update localization and merge
2014-03-02 23:09:45 +08:00
Roman Bogorodskiy
e2d85e6fa1 bhyve: add basic documentation 2014-03-01 23:44:58 +04:00
Daniel P. Berrange
0915053e97 Include error domain and code in log messages from errors
When a virError is raised, pass the error domain and code
onto the systemd journald using metadata fields.

This allows error messages to be queried by code eg

  $ journalctl LIBVIRT_CODE=43

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-28 17:38:46 +00:00
Daniel P. Berrange
c6cae57098 Add docs about use of systemd journal for logging
Document the various fields that libvirt will emit for
journal log records.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-28 17:38:44 +00:00
Daniel P. Berrange
a9bcd60e31 Auto-generate the table of contents in logging doc
The logging doc had a hand-written table of contents
instead of using the automatic XSL generated one.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-28 17:37:38 +00:00
Daniel P. Berrange
e86ee41bc1 Fix heading level in logging docs
The logging docs went straight from <h1> to <h3> header level,
skipping out <h2>.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-28 17:37:38 +00:00
Ján Tomko
1984540206 Document the keyboard as a valid input type
Commit bc18373 added a new input type, but didn't change the
documentation.
2014-02-24 18:55:00 +01:00
John Ferlan
7eb37a0d65 bandwidth: Adjust documentation
Recent autotest/virt-test testing on f20 discovered an anomaly in how
the bandwidth options are documented and used. This was discovered due
to a bug fix in the /sbin/tc utility found in iproute-3.11.0.1 (on f20)
in which overflow was actually caught and returned as an error. The fix
was first introduced in iproute-3.10 (search on iproute2 commit 'a303853e').

The autotest/virt-test test for virsh domiftune was attempting to send
the largest unsigned integer value (4294967295) for maximum value
testing. The libvirt xml implementation was designed to manage values
in kilobytes thus when this value was passed to /sbin/tc, it (now)
properly rejected the 4294967295kbps value.

Investigation of the problem discovered that formatdomain.html.in and
formatnetwork.html.in described the elements and property types slightly
differently, although they use the same code - virNetDevBandwidthParseRate()
(shared by portgroups, domains, and networks xml parsers). Rather than
have the descriptions in two places, this patch will combine and reword
the description under formatnetwork.html.in and have formatdomain.html.in
link to that description.

This documentation faux pas was continued into the virsh man page where
the bandwidth description for both 'attach-interface' and 'domiftune'
did not indicate the format of each value, thus leading to the test using
largest unsigned integer value assuming "bps" rather than "kbps", which
ultimately was wrong.
2014-02-20 14:53:36 -05:00
Daniel P. Berrange
590029f672 Introduce new OOM testing support
The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is  (n * (n + 1) ) / 2.  This gets very large, very
quickly.

This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.

The simple usage is

   $ VIR_TEST_OOM=1 ./qemuxml2argvtest
   ...
   29) QEMU XML-2-ARGV clock-utc                                         ... OK
       Test OOM for nalloc=36 .................................... OK
   30) QEMU XML-2-ARGV clock-localtime                                   ... OK
       Test OOM for nalloc=36 .................................... OK
   31) QEMU XML-2-ARGV clock-france                                      ... OK
       Test OOM for nalloc=38 ...................................... OK
   ...

the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.

If it crashes, then running under valgrind will often show the problem

  $ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When debugging problems it is also helpful to select an individual
test case

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest

In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.

  $ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
  30) QEMU XML-2-ARGV clock-localtime                                   ... OK
      Test OOM for nalloc=36 !virAllocN
  /home/berrange/src/virt/libvirt/src/util/viralloc.c:180
  virHashCreateFull
  /home/berrange/src/virt/libvirt/src/util/virhash.c:144
  virDomainDefParseXML
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
  virDomainDefParseNode
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
  virDomainDefParse
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
  testCompareXMLToArgvFiles
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
  virtTestRun
  /home/berrange/src/virt/libvirt/tests/testutils.c:250
  mymain
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
  virtTestMain
  /home/berrange/src/virt/libvirt/tests/testutils.c:750
  ??
  ??:0
  _start
  ??:?
   FAILED

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-20 15:36:10 +00:00
Li Zhang
bc18373391 conf: Add keyboard input device type
There is no keyboard support currently in libvirt.

For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-19 09:16:31 +01:00
Michal Privoznik
f1ab06e43d network: Introduce network hooks
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-02-18 14:46:49 +01:00
Ján Tomko
032f0d5b3d docs: remove <auth> from secret XML format
This belongs to the pool definition.
2014-02-14 16:47:14 +01:00
Peter Krempa
3cf074ee40 qemu: snapshot: Add support for external active snapshots on gluster
Add support for gluster backed images as sources for snapshots in the
qemu driver. This will also simplify adding further network backed
volumes as sources for snapshot in case qemu will support them.
2014-02-14 11:07:29 +01:00
Cédric Bosdonnat
f4b28d5c8a LXC: added some doc on domxml-from-native with mention of limitations 2014-02-12 17:52:47 +00:00
Martin Kletzander
5b189541ac conf: introduce spiceport chardev backend
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-02-11 13:43:55 +01:00
Chen Hanxiao
b95fde2cf7 docs: grammar fixes in formatdomain
Some grammar fixes.

s/namespace,set/namespace, set
s/container being allowed/container are allowed
s/the <code>uid/The <code>uid

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2014-02-10 14:14:43 -07:00
Peter Krempa
600bca592b qemu: hyperv: Add support for timer enlightenments
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.

This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
2014-02-10 11:30:10 +01:00
Peter Krempa
bbd392ff86 schema: Fix guest timer specification schema according to the docs
According to the documentation describing various tunables for domain
timers not all the fields are supported by all the driver types. Express
these in the RNG:

- rtc, platform: Only these support the "track" attribute.
- tsc: only one to support "frequency" and "mode" attributes
- hpet, pit: tickpolicy/catchup attribute/element
- kvmclock: no extra attributes are supported

Additionally the attributes of the <catchup> element for
tickpolicy='catchup' are optional according to the parsing code. Express
this in the XML and fix a spurious space added while formatting the
<catchup> element and add tests for it.
2014-02-10 11:09:14 +01:00
Laine Stump
eafb53fec2 network: disallow <bandwidth>/<mac> for bridged/macvtap/hostdev networks
https://bugzilla.redhat.com/show_bug.cgi?id=1057321

pointed out that we weren't honoring the <bandwidth> element in
libvirt networks using <forward mode='bridge'/>. In fact, these
networks are just a method of giving a libvirt network name to an
existing Linux host bridge on the system, and libvirt doesn't have
enough information to know where to set such limits. We are working on
a method of supporting network bandwidths for some specific cases of
<forward mode='bridge'/>, but currently libvirt doesn't support it. So
the proper thing to do now is just log an error when someone tries to
put a <bandwidth> element in that type of network. (It's unclear if we
will be able to do proper bandwidth limiting for macvtap networks, and
most definitely we will not be able to support it for hostdev
networks).

While looking through the network XML documentation and comparing it
to the networkValidate function, I noticed that we also ignore the
presence of a mac address in the config in the same cases, rather than
failing so that the user will understand that their desired action has
not been taken.

This patch updates networkValidate() (which is called any time a
persistent network is defined, or a transient network created) to log
an error and fail if it finds either a <bandwidth> or <mac> element
and the network forward mode is anything except 'route'. 'nat', or
nothing. (Yes, neither of those elements is acceptable for any macvtap
mode, nor for a hostdev network).

NB: This does *not* cause failure to start any existing network that
contains one of those elements, so someone might have erroneously
defined such a network in the past, and that network will continue to
function unmodified. I considered it too disruptive to suddenly break
working configs on the next reboot after a libvirt upgrade.
2014-02-05 15:04:58 +02:00
Justin Clift
a6992f600b Fix minor typo in governance doc
While at it, also relinquish active commit rights:
[x years between commits] is probably a poster child example of inactivity :)

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-04 10:43:15 -07:00
Daniel P. Berrange
e45b07314e Write up the project governance process
The project has historically operated as a meritocratic
consensus based community. Formally document what has
always been an unwritten assumption amongst the community
participants. Also include an explicit code of conduct
to preempt any potential, but unlikely, future problems.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-04 11:27:45 +00:00
Pavel Hrdina
fb321a009f docs/page.xls: remove unnecessary namespace attribute
It breaks the build on RHEL-5.10 and because it's only optional we
could remove it from the code. The default namespace will be used.
This hunk was introduced by commit 237a088ba4.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-01-30 15:37:38 +01:00
Osier Yang
fd243fc4ad qemu: Don't fail if the SCSI host device is shareable between domains
It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).

To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specify the device as
shareable).  And the change on the data struct brings on many
subsequent changes in the code.

Prior to this patch, the "shareable" tag didn't work as expected,
it actually work like "non-shareable".  So this patch also added notes
in formatdomain.html to declare the fact.

* src/util/virscsi.h:
  - Remove virSCSIDeviceGetUsedBy
  - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
  - Add virSCSIDeviceIsAvailable

* src/util/virscsi.c:
  - struct virSCSIDevice: Change "used_by" to be an array; Add
    "n_used_by" as the array count
  - virSCSIDeviceGetUsedBy: Removed
  - virSCSIDeviceFree: frees the "used_by" array
  - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
    memory corruption
  - virSCSIDeviceIsAvailable: New
  - virSCSIDeviceListDel: Change the logic, for device which is already
    in the list, just remove the corresponding entry in "used_by". And
    since it's only used in one place, we can safely removing the code
    to find out the dev in the list first.
  - Copyright updating

* src/libvirt_private.sys:
  - virSCSIDeviceGetUsedBy: Remove
  - virSCSIDeviceIsAvailable: New

* src/qemu/qemu_hostdev.c:
  - qemuUpdateActiveScsiHostdevs: Check if the device existing before
    adding it to the list;
  - qemuPrepareHostdevSCSIDevices: Error out if the not all domains
    use the device as "shareable"; Also don't try to add the device
    to the activeScsiHostdevs list if it already there; And make
    more sensible error w.r.t the current "shareable" value in
    driver->activeScsiHostdevs.
  - qemuDomainReAttachHostScsiDevices: Change the logic according
    to the changes on helpers.

Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-30 15:46:24 +08:00
Peter Krempa
7076b4b72c snapshot: Add support for specifying snapshot disk backing type
Add support for specifying various types when doing snapshots. This will
later allow to do snapshots on network backed volumes. Disks of type
'volume' are not supported by snapshots (yet).

Also amend the test suite to check parsing of the various new disk
types that can now be specified.
2014-01-29 12:56:35 +01:00
Dan Kenigsberg
237a088ba4 docs: add a permalink to html headers
Quite often, I need to cite URLs like
    http://libvirt.org/formatnetwork.html#elementQoS
but it is annoying to copy them from the table of contents or the html
source.

This patch borrows from the Python documentation in order to make it
easier to cite headers on libvirt's oneline documentation.
2014-01-27 08:42:09 +01:00
Francesco Romani
08d07e5fd8 spice: expose the QEMU disable file transfer option
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.

Depends on the capability exported in the first patch of the series.

Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-01-21 11:35:41 +01:00
Gao feng
fb2fbc6d7b domain: introduce xml elements for throttle blkio cgroup
This patch introduces new xml elements under <blkiotune>,
we use these new elements to setup the throttle blkio
cgroup for domain. The new blkiotune node looks like this:

<blkiotune>
  <device>
    <path>/path/to/block</path>
    <weight>1000</weight>
    <read_iops_sec>10000</read_iops_sec>
    <write_iops_sec>10000</write_iops_sec>
    <read_bytes_sec>1000000</read_bytes_sec>
    <write_bytes_sec>1000000</write_bytes_sec>
  </device>
</blkiotune>

Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2014-01-20 10:52:42 +08:00
Christophe Fergeau
8eaa25f2d6 doc: Add missing space in <clock> documentation 2014-01-17 18:18:55 +01:00
Daniel Veillard
7b84b1673a Release of libvirt-1.2.1
* docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: updated localization from transifex and regenerated
2014-01-16 17:25:58 +08:00
Eric Blake
908903b317 docs: mention maintenance branches
Mitre tried to assign us two separate CVEs for the fix for
https://bugzilla.redhat.com/show_bug.cgi?id=1047577, on the
grounds that the fixes were separated by more than an hour
and thus triggered different hourly snapshots.  But we
explicitly do NOT want to treat transient security bugs as
CVEs if they can only be triggered by patches in libvirt.git
but where the problem is cleaned up before a formal release.

Meanwhile, I noticed that while our wiki mentioned maintenance
branches and releases, our formal documentation did not.

* docs/downloads.html.in: Contrast hourly snapshots with
maintenance branches.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-01-15 09:12:25 -07:00
Eric Blake
dd0dda2e4a schema: fix idmap validation
When idmap was added to LXC, we forgot to cover it in the testsuite.
The schema was missing an <element> layer, and as a result,
virt-xml-validate was failing on valid dumpxml output.

Reported by Eduard - Gabriel Munteanu on IRC.

* docs/schemas/domaincommon.rng (idmap): Include <idmap> element,
and support interleaves.
* tests/lxcxml2xmldata/lxc-idmap.xml: New file.
* tests/lxcxml2xmltest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-01-10 10:54:14 -07:00