Otherwise the build on armv7l breaks:
error: format ‘%lu’ expects argument of type
‘long unsigned int’, but argument 4 has type
‘size_t’ {aka ‘unsigned int’} [-Werror=format=]
Fixes: 1992ae40fac90c315d0d8d1a9c6f880bd0a39b57
Fixes: e239f7d0a86ebddf9aab3f8c8e6b6e66351485b2
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability represents that qemu supports the "luks-any" encryption
format for RBD images.
Both LUKS and LUKS2 formats can be parsed using this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit changes the _qemuDomainStorageSourcePrivate struct
to support multiple secrets (instead of a single one before this commit).
This will useful for storage encryption requiring more than a single secret.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit changes the qemuBlockStorageSourceAttachData struct
to support multiple secrets (instead of a single one before this commit).
This will useful for storage encryption requiring more than a single secret.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Change secret aliases from %s-%s-secret0 to %s-%s-secret%lu,
which will later be used for storage encryption requiring more
than a single secret.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability represents that qemu supports the layered encryption
of RBD images, where a cloned image is encrypted with a possible
different encryption than its parent image.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When a thread-context object is specified on the cmd line, then
QEMU spawns a thread and sets its affinity to the list of NUMA
nodes specified in .node-affinity attribute. And this works just
fine, until the main QEMU thread itself is not restricted.
Because of v5.3.0-rc1~18 we restrict the main emulator thread
even before QEMU is executed and thus then it tries to set
affinity of a thread-context thread, it inevitably fails with:
Setting CPU affinity failed: Invalid argument
Now, we could lift the pinning temporarily, let QEMU spawn all
thread-context threads, and enforce pinning again, but that would
require some form of communication with QEMU (maybe -preconfig?).
But that would still be wrong, because it would circumvent
<emulatorpin/>.
Technically speaking, thread-context is an internal
implementation detail of QEMU, and if it weren't for it, the main
emulator thread would be doing the allocation. Therefore, we
should honor the pinning and prune the list of node so that
inaccessible ones are dropped.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When building a thread-context object (inside of
qemuBuildThreadContextProps()) we look at given memory-backend-*
object and look for .host-nodes attribute. This works, as long as
we need to just copy the attribute value into another
thread-context attribute. But soon we will need to adjust it.
That's the point where having the value in virBitmap comes handy.
Utilize the previous commit, which made
qemuBuildMemoryBackendProps() set the argument and pass it into
qemuBuildThreadContextProps().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While it's true that anybody who's interested in getting
.host-nodes attribute value can just use
virJSONValueObjectGetArray() (and that's exactly what
qemuBuildThreadContextProps() is doing, btw), if somebody is
interested in getting the actual virBitmap, they would have to
parse the JSON array.
Instead, introduce an argument to qemuBuildMemoryBackendProps()
which is set to corresponding value used when formatting the
attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are two compound conditions in
qemuBuildMemoryBackendProps() and each one checks for nodemask
for NULL first. Join them into one bigger block.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The order of pinning priority (at least for emulator thread) was
set by v1.2.15-rc1~58 (for cgroup code). But later, when
automatic placement was implemented into
qemuDomainGetEmulatorPinInfo(), the priority was not honored.
Now that we have this priority code in a separate function, we
can just call that and avoid this type of error.
Fixes: 776924e37649f2d47acd805746d5fd9325212ea5
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The set of if()-s that determines the preference in cpumask used
for setting things like emulatorpin, vcpupin, etc. is going to be
re-used. Separate it out into a function.
You may think that this changes behaviour, but
qemuProcessPrepareDomainNUMAPlacement() ensures that
priv->autoCpuset is set for VIR_DOMAIN_CPU_PLACEMENT_MODE_AUTO.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have this crazy backwards compatibility when it comes to
serial and console devices. Basically, in same cases the very
first <console/> is just an alias to the very first <serial/>
device. This is to be seen at various places:
1) virDomainDefFormatInternalSetRootName() - when generating
domain XML, the <console/> configuration is basically ignored
and corresponding <serial/> config is formatted,
2) virDomainDefAddConsoleCompat() - which adds a copy of
<serial/> or <console/> into virDomainDef in post parse.
And when talking to QEMU we need a special handling too, because
while <serial/> is generated on the cmd line, the <console/> is
not. And in a lot of place we get it right. Except for generating
device aliases. On domain startup the 'expected' happens and
devices get "serial0" and "console0" aliases, correspondingly.
This ends up in the status XML too. But due to aforementioned
trick when formatting domain XML, "serial0" ends up in both
'virsh dumpxml' and the status XML. But internally, both devices
have different alias. Therefore, detaching the device using
<console/> fails as qemuDomainDetachDeviceChr() tries to detach
"console0".
After the daemon is restarted and status XML is parsed, then
everything works suddenly. This is because in the status XML both
devices have the same alias.
Let's generate correct alias from the beginning.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2156300
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Other APIs that internally use QEMU migration and need to temporarily
suspend a domain already report failure to resume vCPUs by setting
VIR_DOMAIN_PAUSED_API_ERROR state reason and emitting
VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR.
Let's do the same in qemuMigrationSrcRestoreDomainState for consistent
behavior.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some APIs (migration, save/restore, snapshot, ...) require a domain to
be suspended temporarily. In case resuming the domain fails, the domain
will be unexpectedly left paused when the API finishes. This situation
is reported via VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR detail. But we do not have a
corresponding reason for VIR_DOMAIN_PAUSED state and the reason would
remain set to the value used when the domain was paused. So the state
reason would suggest the operation is still running.
This patch changes the state reason to a new VIR_DOMAIN_PAUSED_API_ERROR
to make it clear the API that paused the domain already finished, but
failed to resume the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some vhostuser daemons, we validate that the guest memory is shared
with the host.
With earlier versions of QEMU, it was only possible to mark memory
as shared by defining an explicit NUMA topology. Later, QEMU exposed
the name of the default memory backend (defaultRAMid) so we can mark
that memory as shared.
Since libvirt commit:
commit bff2ad5d6b1f25da02802273934d2a519159fec7
qemu: Relax validation for mem->access if guest has no NUMA
we already check for the case when user requests shared memory,
but QEMU did not expose defaultRAMid.
Drop the duplicit check from vhostuser device validation, to make
it pass on hotplug even after libvirtd restart.
This avoids the need to store the defaultRAMid, since we don't really
need it for anything after the VM has been already started.
https://bugzilla.redhat.com/show_bug.cgi?id=2078693https://bugzilla.redhat.com/show_bug.cgi?id=2177701
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
set useBinarySpecificLabel = true when calling qemuSecurityCommandRun
for the passt process, so that the new process context will include
the binary-specific label that should be used for passt (passt_t)
rather than svirt_t (as would happen if useBinarySpecificLabel was
false). (The MCS part of the label, which is common to all child
processes related to a particular qemu domain instance, is also set).
Resolves: https://bugzilla.redhat.com/2172267
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Normally when a child process is started by libvirt, the SELinux label
of that process is set to virtd_t (plus an MCS range). In at least one
case (passt) we need for the SELinux label of a child process label to
match the label that the binary would have transitioned to
automatically if it had been run standalone (in the case of passt,
that label is passt_t).
This patch modifies virSecuritySELinuxSetChildProcessLabel() (and all
the functions above it in the call chain) so that the toplevel
function can set a new argument "useBinarySpecificLabel" to true. If
it is true, then virSecuritySELinuxSetChildProcessLabel() will call
the new function virSecuritySELinuxContextSetFromFile(), which uses
the selinux library function security_compute_create() to determine
what would be the label of the new process if it had been run
standalone (rather than being run by libvirt) - the MCS range from the
normally-used label is added to this newly derived label, and that is
what is used for the new process rather than whatever is in the
domain's security label (which will usually be virtd_t).
In order to easily verify that nothing was broken by these changes to
the call chain, all callers currently set useBinarySpecificPath =
false, so all behavior should be completely unchanged. (The next
patch will set it to true only for the case of running passt.)
https://bugzilla.redhat.com/2172267
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 54fa1b44afc ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d40 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.
Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.
Correct this, and add some XML/argv tests.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Good to have for debugging in case something wrong happens during
incoming migration.
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For shutoff VMs we don't have the storage source backing chain
populated so it will fail this check and error out. Move it to
part that is done only when VM is running.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Capability to determine whether this qemu supports the 'blob' option for
virtio-gpu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than storing the video type as an integer, use the proper enum
type within the struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parameter was added for consistency with virPidFileAcquirePath.
However, all callers of virPidFileAcquire pass false.
Remove the argument.
Partially-reverts: 2250a2b5d21c3b3529727f38a99cba22f84024f7
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function doesn't set any capability and we don't want to add
arch-dependent always-peresent capabilities in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Check the architecture of the guest rather than relying on
QEMU_CAPS_LOADPARM which is set based on architecture.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the guest architecture to decide whether to format
'aes-key-wrap'/'dea-key-wrap' rather than
QEMU_CAPS_AES_KEY_WRAP/QEMU_CAPS_DEA_KEY_WRAP which were set based on
architecture.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_MACH_VIRT_GIC_VERSION is always asserted for VIR_ARCH_AARCH64.
Note that this patch is a direct conversion of the logic originally
residing in the capabilities code. A better coversion would be (based on
whether it is available for just AARCH64 or also ARM) to base it on the
guest architecture.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than asserting a capability based on architecture, format the
fallback parameter based on the presence of the newer capability and an
explicit architecture check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is based on a platform check rather than what given qemu
supports.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_NO_ACPI is asserted based on architecture, so it can be
replaced by a non-capability check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 24cc9cda826 switched over to use -machine hpet, but one of the
steps it did was to clear the QEMU_CAPS_NO_HPET capability.
The validation check still uses the old capability though which means
that for configs which would explicitly enable HPET we'd report an error.
Since HPET is an x86(_64) platform specific device, convert the
validation check to an architecture check as all supported qemu versions
actually support it.
Modify a test case to request HPET to catch posible future problems.
Fixes: 24cc9cda826
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always assert the flag for aarch64 qemus and in qemu the 'aarch64'
cpu property doesn't seem to be optional.
Remove checks and remove impossible test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the last outstanding
pointless error check and turn the return type into 'void'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
