Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Allow saving various aspects necessary to do NBD migration via blockdev
by storing a 'virStorageSource' in the disk private data meant to store
the NBD target of migration. Along with this add code to parse and
format it into the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than always checking which path to use pre-assign it when
preparing storage source.
This reduces the need to pass 'vm' around too much. For later use the
path can be retrieved from the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Before we exec() qemu we have to spawn pr-helper processes for
all managed reservations (well, technically there can only one).
The only caveat there is that we should place the process into
the same namespace and cgroup as qemu (so that it shares the same
view of the system). But we can do that only after we've forked.
That means calling the setup function between fork() and exec().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add helper which will map values of disk cache mode to the flags which
are accepted by various parts of the qemu block layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We store the flags passed to the API which started the migration. Let's
use them instead of a separate bool to check if post-copy migration was
requested.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started QEMU_ASYNC_JOB_DUMP
and we can use them to check whether a memory-only dump is running.
There's no need for a specific bool flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an async job is running, we sometimes need to know how it was
started to distinguish between several types of the job, e.g., post-copy
vs. normal migration. So far we added a specific bool item to
qemuDomainJobObj for such cases, which doesn't scale very well and
storing such bools in status XML would be painful so we didn't do it.
A better approach is to store the flags passed to the API which started
the async job, which can be easily stored in status XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether QEMU supports TLS migration and stores the
original value of tls-creds parameter to priv->migTLSAlias. This is no
longer needed because we already have the original value stored in
priv->migParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any job which touches migration parameters will first store their
original values (i.e., QEMU defaults) to qemuDomainJobObj to make it
easier to reset them back once the job finishes.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function is tightly connected to migration, it was renamed as
qemuMigrationCapsCheck and moved to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we assume QEMU_CAPS_NETDEV, the only thing left to check
is whether we need to use the legacy -net syntax because of
a non-conforming armchitecture.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It will be necessary to initialize various aspects for the detected
members of the backing chain. Add a function that will handle it and
call it from qemuDomainPrepareDiskSource and qemuDomainDetermineDiskChain
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
During domain startup there are many places where we need to acquire
secrets. Currently code passes around a virConnectPtr, except in the
places where we pass in NULL. So there are a few codepaths where ability
to start guests using secrets will fail. Change to acquire a handle to
the secret driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since it may be possible that the state is unknown in some cases we
should store it as a tristate so that other code using it can determine
whether the state was updated.
Handle a DUMP_COMPLETED event processing the status, stats, and
error string. Use the @status in order to copy the error that
was generated whilst processing the @stats data. If an error was
provided by QEMU, then use that instead.
If there's no async job, we can just ignore the data.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Define the qemuMonitorDumpStats as a new job JobStatsType to handle
being able to get memory dump statistics. For now do nothing with
the new TYPE_MEMDUMP.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a TYPE_SAVEDUMP so that when coalescing stats for a save or
dump we don't needlessly try to get the mirror stats for a migration.
Other conditions can still use MIGRATION and SAVEDUMP interchangably
including usage of the @migStats field to fetch/store the data.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Convert the stats field in _qemuDomainJobInfo to be a union. This
will allow for the collection of various different types of stats
in the same field.
When starting the async job that will end up being used for stats,
set the @statsType value appropriately. The @mirrorStats are
special and are used with stats.mig in order to generate the
returned job stats for a migration.
Using the NONE should avoid the possibility that some random
async job would try to return stats for migration even though
a migration is not in progress.
For now a migration and a save job will use the same statsType
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add and use qemuProcessEventFree for freeing qemuProcessEvents. This
is less error-prone as the compiler can help us make sure that for
every new enumeration value of qemuProcessEventType the
qemuProcessEventFree function has to be adapted.
All process*Event functions are *only* called by
qemuProcessHandleEvent and this function does the freeing by itself
with qemuProcessEventFree. This means that an explicit freeing of
processEvent->data is no longer required in each process*Event
handler.
The effectiveness of this change is also demonstrated by the fact that
it fixes a memory leak of the panic info data in
qemuProcessHandleGuestPanic.
Reported-by: Wang Dong <dongdwdw@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch pass event error up to the place where we can
use it. Error is passed only for sync blockjob event mode
as we can't use the error in async mode. In async mode we
just pass the event details to the client thru event API
but current blockjob event API can not carry extra parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When doing block commit we need to allow write for members of the
backing chain so that we can commit the data into them.
qemuDomainDiskChainElementPrepare was used for this which since commit
786d8d91b4 calls qemuDomainNamespaceSetupDisk which has very adverse
side-effects, namely it relabels the nodes to the same label it has in
the main namespace. This was messing up permissions for the commit
operation since its touching various parts of a single backing chain.
Since we are are actually not introducing new images at that point add a
flag for qemuDomainDiskChainElementPrepare which will refrain from
calling to the namespace setup function.
Calls from qemuDomainSnapshotCreateSingleDiskActive and
qemuDomainBlockCopyCommon do introduce new members all calls from
qemuDomainBlockCommit do not, so the calls are anotated accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1506072
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
qemuDomainGetImageIds and qemuDomainStorageFileInit are helpful when
trying to access a virStorageSource from the qemu driver since they
figure out the correct uid and gid for the image.
When accessing members of a backing chain the permissions for the top
level would be used. To allow using specific permissions per backing
chain level but still allow inheritance from the parent of the chain we
need to add a new parameter to the image ID APIs.
This new capability enables a pause before device state serialization so
that we can finish all block jobs without racing with the end of the
migration. The pause is indicated by "pre-switchover" state. Once we're
done QEMU enters "device" migration state.
This patch just defines the new capability and QEMU migration states and
their mapping to our job states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Each time we need to check whether a given migration capability is
supported by QEMU, we call query-migrate-capabilities QMP command and
lookup the capability in the returned list. Asking for the list of
supported capabilities once when we connect to QEMU and storing the
result in a bitmap is much better and we don't need to enter a monitor
just to check whether a migration capability is supported.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the encryption information can also be disk source specific
move it from qemuDomainDiskPrivate to qemuDomainStorageSourcePrivate
Since the last allocated element from qemuDomainDiskPrivate is
removed, that means we no longer need qemuDomainDiskPrivateDispose.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the secret information is really virStorageSource specific
piece of data, let's manage the privateData from there instead of
at the Disk level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add the object definition and helpers to store security-related private
data for virStorageSources.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We need to send allowReboot in the migration cookie to ensure the same
behavior of the virDomainSetLifecycleAction() API on the destination.
Consider this scenario:
1. On the source the domain is started with:
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
2. User calls an API to set "destroy" for <on_reboot>:
<on_poweroff>destroy</on_poweroff>
<on_reboot>destroy</on_reboot>
<on_crash>destroy</on_crash>
3. The guest is migrated to a different host
4a. Without the allowReboot in the migration cookie the QEMU
process on destination would be started with -no-reboot
which would prevent using the virDomainSetLifecycleAction() API
for the rest of the guest lifetime.
4b. With the allowReboot in the migration cookie the QEMU process
on destination is started without -no-reboot like it was started
on the source host and the virDomainSetLifecycleAction() API
continues to work.
The following patch adds a QEMU implementation of the
virDomainSetLifecycleAction() API and that implementation disallows
using the API if all actions are set to "destroy" because we add
"-no-reboot" on the QEMU command line. Changing the lifecycle action
is in this case pointless because the QEMU process is always terminated.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later on in implementation of new API
virDomainSetLifecycleAction(). In order to use it, we need to store
the value in status XML to not lose the information if libvirtd is
restarted.
If some guest was started by old libvirt where it was not possible
to change the lifecycle action for running guest, we can safely
detect it based on the current actions from the status XML.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When libvirt older than 3.9.0 reconnected to a running domain started by
old libvirt it could have messed up the expansion of host-model by
adding features QEMU does not support (such as cmt). Thus whenever we
reconnect to a running domain, revert to an active snapshot, or restore
a saved domain we need to check the guest CPU model and remove the
CPU features unknown to QEMU. We can do this because we know the domain
was successfully started, which means the CPU did not contain the
features when libvirt started the domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1495171
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new function to prepare domain disks which will also do the
volume source to actual disk source translation.
The 'pretend' condition is not transferred to the new location since it
does not help in writing tests and also no tests abuse it.
