Commit Graph

43 Commits

Author SHA1 Message Date
Martin Kletzander
89c509a0c1 util: Add getters for cgroup block device I/O throttling
Since now they were not needed, but I sense they will be in a short
while.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-18 16:25:16 -07:00
Peter Krempa
88f6c007c3 cgroup: Drop resource partition from virSystemdMakeScopeName
The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.

This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.

The error is exposed by the following log entry:

debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'

for a "/machine/test" resource and "testvm" vm.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570
2015-07-22 07:12:56 +02:00
John Ferlan
0456eda317 cgroup: Use virCgroupNewThread
Replace the virCgroupNew{Vcpu|Emulator|IOThread} calls with the common
virCgroupNewThread API

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-04-09 19:27:08 -04:00
John Ferlan
2cd3a980dc cgroup: Introduce virCgroupNewThread
Create a new common API to replace the virCgroupNew{Vcpu|Emulator|IOThread}
API's using an emum to generate the cgroup name

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-04-09 19:27:08 -04:00
Michal Privoznik
d65acbde35 vircgroup: Introduce virCgroupControllerAvailable
This new internal API checks if given CGroup controller is
available.  It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-04-08 11:54:24 +02:00
Michal Privoznik
771e6e5a46 virCgroupController: Check the enum fits into 'int'
Throughout our code, the virCgroupController enum is used in two ways.
First as an index to an array of cgroup controllers:

struct virCgroup {
    char *path;

    struct virCgroupController controllers[VIR_CGROUP_CONTROLLER_LAST];
};

Second way is that when calling virCgroupNew() a bitmask of the enum
items can be passed to selectively detect only some controllers. For
instance:

int
virCgroupNewVcpu(virCgroupPtr domain,
                 int vcpuid,
                 bool create,
                 virCgroupPtr *group)
{
    ...
    controllers = ((1 << VIR_CGROUP_CONTROLLER_CPU) |
                   (1 << VIR_CGROUP_CONTROLLER_CPUACCT) |
                   (1 << VIR_CGROUP_CONTROLLER_CPUSET));

    if (virCgroupNew(-1, name, domain, controllers, group) < 0)
        goto cleanup;
}

Even though it's highly unlikely that so many new controllers will be
invented so that we would overflow when constructing the bitmask, it
doesn't hurt to check at compile time either.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-30 15:20:28 +02:00
Martin Kletzander
ba1dfc5b6a cgroup: Add accessors for cpuset.memory_migrate
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-20 13:40:02 +01:00
Daniel P. Berrange
318df5a05f Add support for systemd-machined CreateMachineWithNetwork
systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.

This falls back to the old CreateMachine method when the new
one is not supported.
2015-01-15 11:07:07 +00:00
Martin Kletzander
1a80b97ddf util: Add function virCgroupHasEmptyTasks
That function helps checking whether there's a task in that cgroup.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-12-16 11:15:27 +01:00
Guido Günther
4882618ed1 qemu: use systemd's TerminateMachine to kill all processes
If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with

  'CreateMachine: File exists'

Additional processes can e.g. be added via

  echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks

but there are other cases like

  http://bugs.debian.org/761521

Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.
2014-10-01 20:17:46 +02:00
John Ferlan
3abb95cad4 vircgroup: Introduce virCgroupNewIOThread
Add virCgroupNewIOThread() to mimic virCgroupNewVcpu() except the naming
scheme with use "iothread" rather than "vcpu".
2014-09-15 13:18:56 -04:00
Cédric Bosdonnat
47e5b5ae32 lxc: allow to keep or drop capabilities
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:

  <mknod state="on"/>, keep CAP_MKNOD capability
  <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability

Users can restrict or give more capabilities than the default using
this mechanism.
2014-07-23 15:12:37 +08:00
Peter Krempa
a48f445100 util: cgroup: Add helper to convert device mode to string
Cgroups code uses VIR_CGROUP_DEVICE_* flags to specify the mode but in
the end it needs to be converted to a string. Add a helper to do it and
use it in the cgroup code before introducing it into the rest of the
code.
2014-07-08 14:34:05 +02:00
Ján Tomko
897808e74f Extend virCgroupGetPercpuStats to fill in vcputime too
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.

Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.

Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
2014-04-09 16:24:08 +02:00
Richard Weinberger
6fb42d7cdc Ensure systemd cgroup ownership is delegated to container with userns
This function is needed for user namespaces, where we need to chmod()
the cgroup to the initial uid/gid such that systemd is allowed to
use the cgroup.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-24 15:35:47 +00:00
Thorsten Behrens
4b3b2f6ceb Implement domainGetCPUStats for lxc driver. 2014-02-20 16:20:09 +01:00
Thorsten Behrens
65158899b7 Make qemuGetDomainTotalCPUStats a virCgroup function.
To reuse this from other drivers, like lxc.
2014-02-20 16:20:09 +01:00
Thorsten Behrens
a2bb187c7e Add util virCgroupGetBlkioIo*Serviced methods.
This reads blkio stats from blkio.throttle.io_service_bytes and
blkio.throttle.io_serviced.
2014-02-20 16:20:09 +01:00
Gao feng
3b431929a2 blkio: Setting throttle blkio cgroup for domain
This patch introduces virCgroupSetBlkioDeviceReadIops,
virCgroupSetBlkioDeviceWriteIops,
virCgroupSetBlkioDeviceReadBps and
virCgroupSetBlkioDeviceWriteBps,

we can use these interfaces to set up throttle
blkio cgroup for domain.

This patch also adds the new throttle blkio cgroup
elements to the test xml.

Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2014-01-20 10:52:44 +08:00
Peter Krempa
d79fe8b50b cgroup: Move [qemu|lxc]GetCpuBWStatus to vicgroup.c and refactor it
The function existed in two identical instances in lxc and qemu. Move it
to vircgroup.c and simplify it. Refactor the callers too.
2013-09-16 11:32:49 +02:00
Eric Blake
2ff9e54cbf cgroup: functional sort
Make future patches smaller by matching a sane header listing in
the first place.  No semantic change.

* src/util/vircgroup.h: Move free next to new, and controller
functions next to each other.
* src/util/vircgroup.c (virCgroupFree, virCgroupHasController)
(virCgroupPathOfController, virCgroupRemoveRecursively)
(virCgroupRemove): Sort implementation to be closer to header.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 16:08:18 -06:00
Daniel P. Berrange
2fe2470181 Enable support for systemd-machined in cgroups creation
Make the virCgroupNewMachine method try to use systemd-machined
first. If that fails, then fallback to using the traditional
cgroup setup code path.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-31 19:29:19 +01:00
Daniel P. Berrange
aedd46e7e3 Add support for systemd cgroup mount
Systemd uses a named cgroup mount for tracking processes. Add
it as another type of controller, albeit one which we have to
special case in a number of places. In particular we must
never create/delete directories there, nor add tasks. Essentially
the systemd mount is to be considered read-only for libvirt.

With this change both the virCgroupDetectPlacement and
virCgroupCopyPlacement methods must be invoked. The copy
placement method will copy setup for resource controllers
only. The detect placement method will probe for any
named controllers, or resource controllers not already
setup.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-31 19:27:19 +01:00
Daniel P. Berrange
5ec5a22493 Add 'controllers' arg to virCgroupNewDetect
When detecting cgroups we must honour any controllers
whitelist the driver may have.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-25 19:55:47 +01:00
Daniel P. Berrange
525c9d5a49 Make virCgroupIsValidMachine static
The virCgroupIsValidMachine does not need to be called from
outside the cgroups file now, so make it static.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-25 19:55:29 +01:00
Daniel P. Berrange
a45b99ead9 Introduce a more convenient virCgroupNewDetectMachine
Instead of requiring drivers to use a combination of calls
to virCgroupNewDetect and virCgroupIsValidMachine, combine
the two into virCgroupNewDetectMachine

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-25 19:47:30 +01:00
Daniel P. Berrange
b333330aa5 New cgroups API for atomically creating machine cgroups
Instead of requiring one API call to create a cgroup and
another to add a task to it, introduce a new API
virCgroupNewMachine which does both jobs at once. This
will facilitate the later code to talk to systemd to
achieve this job which is also atomic.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-25 11:42:47 +01:00
Daniel P. Berrange
d64e852b5a Remove obsolete cgroups creation apis
The virCgroupNewDomainDriver and virCgroupNewDriver methods
are obsolete now that we can auto-detect existing cgroup
placement. Delete them to reduce code bloat.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-23 22:46:31 +01:00
Daniel P. Berrange
e638778eb3 Add API for checking if a cgroup is valid for a domain
Add virCgroupIsValidMachine API to check whether an auto
detected cgroup is valid for a machine. This lets us
check if a VM has just been placed into some generic
shared cgroup, or worse, the root cgroup

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-23 22:46:31 +01:00
Daniel P. Berrange
66a7f857f3 Add a virCgroupNewDetect API for finding cgroup placement
Add a virCgroupNewDetect API which is used to initialize a
cgroup object with the placement of an arbitrary process.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-23 22:35:26 +01:00
Daniel P. Berrange
b64dabff27 Report full errors from virCgroupNew*
Instead of returning raw errno values, report full libvirt
errors in virCgroupNew* functions.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-22 13:09:58 +01:00
John Ferlan
d94a3cfcfb Fix build breaker with ATTRIBUTE_NONNULL defs
Using "./autogen.sh --system lv_cv_static_analysis=yes" for my daily
Coverity builds resulted in the following error when building:

In file included from util/vircgrouppriv.h:32:0,
                 from util/vircgroup.c:44:
util/vircgroup.h:59:5: error: nonnull argument with out-of-range operand number (argument 1, operand 5)
util/vircgroup.h:74:5: error: nonnull argument references non-pointer operand (argument 1, operand 4)
make[3]: *** [libvirt_util_la-vircgroup.lo] Error 1
make[3]: Leaving directory `/home/jferlan/libvirt.cov.curr/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/jferlan/libvirt.cov.curr/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/jferlan/libvirt.cov.curr'
make: *** [all] Error 2
2013-04-16 07:17:00 -04:00
Daniel P. Berrange
e7d8ab016b Add support for perf_event and net_cls cgroup controllers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:32 +01:00
Daniel P. Berrange
1da631ecf3 Add an API for re-mounting cgroups, to isolate the process location
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:32 +01:00
Daniel P. Berrange
767596bdb4 Remove non-functional code for setting up non-root cgroups
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
aa8604dd45 Add a new virCgroupNewPartition for setting up resource partitions
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
04c18d25f1 Rename virCgroupForXXX to virCgroupNewXXX
Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
dca927c82f Rename virCgroupMounted to virCgroupHasController & make it more robust
The virCgroupMounted method is badly named, since a controller can be
mounted, but disabled in the current object. Rename the method to be
virCgroupHasController. Also make it tolerant to a  NULL virCgroupPtr
and out-of-range controller index, to avoid duplication of these
checks in all callers

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 14:49:12 +01:00
Daniel P. Berrange
56f27b3bbc Don't create dirs in cgroup controllers we don't want to use
Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.

Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:54 +01:00
Daniel P. Berrange
804a809a06 Rename virCgroupGetAppRoot to virCgroupForSelf
The virCgroupGetAppRoot is not clear in its meaning. Change
to virCgroupForSelf to highlight that this returns the
cgroup config for the caller's process

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:54 +01:00
Gao feng
8d19a9f578 cgroup: export virCgroupRemoveRecursively
We will use virCgroupRemoveRecursively to remove cgroup
directories in the coming patch.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2013-03-20 14:21:27 -06:00
Hu Tao
dfa88e6455 include util.h in cgroup.h
required by VIR_ENUM_DECL.
2013-01-16 17:23:58 -07:00
Daniel P. Berrange
f9c7020c1f Rename cgroup.{h,c} to vircgroup.{h,c}
To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00