Commit 52521de8332c2323bd ("qemu: Use qemuDomainSaveStatus") replaced a call
to virDomainObjSave() with qemuDomainSaveStatus() as a part of cleanup. Since
qemuDomainSaveStatus() does not indicate any failure through its return code,
the error handling cleanup code got eliminated in the process. Thus upon
failure, we will no longer killing the started qemu process. This commit fixes
this by reverting the change that was introduced with the above commit.
Fixes: 52521de8332c2323bd ("qemu: Use qemuDomainSaveStatus")
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
qemu-6.2 is out, update the caps dump for the final time.
Notable changes:
- 'unstable' feature flag for various QMP schema entries
- 'aio-max-batch' iothread property
- 'kernel-hashes' knob for the 'sev-guest' object
- 'native-hotplug' of 'pcie-root-port' is now unstable again
- 'page-sampling/dirty-ring/dirty-bitmap' mode for 'calc-dirty-rate'
- 'toolsversion' field for the 'vmdk' disk format driver
- CPU changes resulting in 'core-capability' being present on the cpu
of the machine this dump was done on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we only check whether the dnsmasq version is new enough,
there is no need for the caps field.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since dnsmasq supports --ra-param for a long time, this code is now
unused.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
All the capabilities should be supported in 2.67.
Make this the minimum version, since even the oldest
distros we support have moved on:
Debian 8: 2.72
CentOS 7: 2.76
Ubuntu 18.04: 2.79
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If remote driver was disabled there is no need to check whether
host has a XDR library installed.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way our wireshark dissector works is by providing decoders
for primitive types (like integers, string, double, etc.) and
then parsing virsomethingprotocol.x files and generating complex
decoders for RPC. This obviously means that XDR is required for
the dissector, but corresponding check was missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The admin module is very closely tied to RPC. If we are
building without RPC support there's not much use for the
admin module, in fact it fails to build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logging manager is very closely tied to RPC. If we are
building without RPC support there's not much use for the
manager, in fact it fails to build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our RPC layer is as tied to XDR as possible. Therefore, if we
haven't detected and XDR library there's not much sense in trying
to build RPC layer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing RPC specific about virnettlscontext.c or
virnetsocket.c. We use TLS for other things than just RPC
encryption (e.g. for generating random numbers) and sockets can
be used even without RPC.
Move these two sources into a static library (virt_socket) so
that other areas can use it even when RPC is disabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When implementing sparse streams, one of improvements I did was
to increase client buffer size for sending/receiving stream data
(commit v1.3.5-rc1~502). Previously, we were using 64KiB buffer
while packets on RPC are 256KiB (usable data is slightly less
because of the header). This meant that it took multiple calls of
virStreamRecv()/virStreamSend() to serve a single packet of data.
In my fix, I've included the virnetprotocol.h file which provides
VIR_NET_MESSAGE_LEGACY_PAYLOAD_MAX macro which is the exact size
of data in a single packet. However, including the file from
libvirt-stream.c which implements public APIs is not right. If
RPC module is not built then the file doesn't exists.
Redefine the macro and drop the include. The size can never
change anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And its callers. The parameter is no longer used since virDomainObjSave
was replaced with qemuDomainSaveStatus wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is a nice wrapper around virDomainObjSave which logs a warning, but
otherwise ignores the error. Let's use it where appropriate.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When return-path is enabled, QEMU on the source host won't report
completed migration until the destination QEMU sends a confirmation it
successfully loaded all data. Libvirt would detect such situation in the
Finish phase and report the error read from QEMU's stderr back to the
source, but using return-path could give use a bit better error
reporting with an earlier restart of vCPUs on the source.
The capability is only enabled when the connection between QEMU
processes on the source and destination hosts is bidirectional. In other
words, only when VIR_MIGRATE_TUNNELLED is not set, because our tunnel
only allows one-way communication from the source to the destination.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far we were enabling specific migration capabilities when a
corresponding API flag is set. We need to generalize our code to be able
to enable some migration capabilities unless a particular API flag is
used.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Different CPU generations have different limits on the number
of SEV/SEV-ES guests that can be run. Since both limits come
from the same overall set, there is typically also BIOS config
to set the tradeoff betweeen SEV and SEV-ES guest limits.
This is important information to expose for a mgmt application
scheduling guests to hosts.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This will be needed directly in the QEMU driver in a later patch.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are limits on the number of SEV/SEV-ES guests that can
be run on machines, which may be influenced by firmware
settings. This is important to expose to users.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are limits on the number of SEV/SEV-ES guests that can
be run on machines, which may be influenced by firmware
settings. This is important to expose to users.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Report extra info about the SEV setup, returning those fields
that are required to calculate the expected launch measurement
HMAC(0x04 || API_MAJOR || API_MINOR || BUILD ||
GCTX.POLICY || GCTX.LD || MNONCE; GCTX.TIK)
specified in section 6.5.1 of AMD Secure Encrypted
Virtualization API.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're only returning the set of fields needed to perform an
attestation, per the SEV API docs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Querying launch params on a inactive guest currently triggers
a warning about the monitor being NULL.
https://bugzilla.redhat.com/show_bug.cgi?id=2030437
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Three more parameters are required in order that clients can
perform a launch attestation on the SEV guest.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit 46783e6307, the 'virsh dominfo' command calls
virDomainGetMessages to report any messages from the domain.
Hypervisors not implementing the API now get the following
libvirtd log message when clients invoke 'virsh dominfo'
this function is not supported by the connection driver: virDomainGetMessages
Although libxl currently does not support any tainting or
deprecation messages, provide an implementation to squelch
the previously unseen error message when collecting dominfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This mode will enable all enlightenments known to the hypervisor. See
https://bugzilla.redhat.com/show_bug.cgi?id=1851249
Example:
<features>
<hyperv mode='passthrough'/>
...
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
