The new controller will not yet be used automatically by
libvirt, but at this point it's already possible to configure
a guest to use it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability will be set when the pcie-pci-bridge device
is available in the QEMU binary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We're going to add a similarly-named attribute later, and we'd
like to be consistent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1557769
Problem with device mapper targets is that there can be several
other devices 'hidden' behind them. For instance, /dev/dm-1 can
consist of /dev/sda, /dev/sdb and /dev/sdc. Therefore, when
setting up devices CGroup and namespaces we have to take this
into account.
This bug was exposed after Linux kernel was fixed. Initially,
kernel used different functions for getting block device in
open() and ioctl(). While CGroup permissions were checked in the
former case, due to a bug in kernel they were not checked in the
latter case. This changed with the upstream commit of
519049afead4f7c3e6446028c41e99fde958cc04 (v4.16-rc5~11^2~4).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The qemu command line generator code set disk caching of shareable disks
to 'none' when formatting the command line silently. Move this code to a
common place when preparing the domain definition for startup so that it
does not have to be duplicated.
The new test case shows that the actual cache mode will now be recorded
in the live XML definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The old qcow2 encryption format was buggy, so the new approach is to use
luks inside qcow2. As it turns out, it didn't require that many changes.
It was necessary to fix the command line formatter to stop mangling the
format when secrets are present and specify the encryption format and
secret in correct format.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It will be necessary to initialize various aspects for the detected
members of the backing chain. Add a function that will handle it and
call it from qemuDomainPrepareDiskSource and qemuDomainDetermineDiskChain
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For some reason we've decided to silently translate the disk
detect_zeroes mode if it would be invalid. Extract the
logic so that it does not need to be copypasta'd across the code base.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Make the function more usable by returning the full disk definition and
fix the only caller for the new semantics. The new name for the function
is virDomainDiskDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
My commit 2e0d6cdec4 claimed qemuMonitorJSONCheckError guarantees
"return" object exists in the JSON reply. But it only makes sure the key
is there, while the type of the value is not checked. A lot of callers
do not care since they only want to see whether their QMP command failed
or not, but any caller which needs to read some data from the reply
wants to make sure the correct data type was returned.
This patch adds a new API called qemuMonitorJSONCheckReply which calls
qemuMonitorJSONCheckError and checks "return" contains a value of the
specified type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than trying to prevent stealing of the 'actions' virJSONValue
into the monitor command replace the code so that it does the same
thing, since 'actions' was actually not really used after calling the
monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Use virJSONValueObjectGetArray instead of virJSONValueObjectGet so that
it's not necessary to check whether it's an array.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It was not possible to determine whether virJSONValueObjectAddVArgs and
the functions using it would consume a virJSONValue or not when used
with the 'a' or 'A' modifier depending on when the loop failed.
Fix this by passing in a pointer to the pointer so that it can be
cleared once it's successfully consumed and the callers don't have to
second-guess leaving a chance of leaking or double freeing the value
depending on the ordering.
Fix all callers to pass a double pointer too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Mediated devices support hot-{plug,unplug} since their introduction in
kernel 4.10, however libvirt has still been missing support for this.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Mediated devices support hot-{plug,unplug} since their introduction in
kernel 4.10, however libvirt has still been missing support for this.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
qemuDomainDetachWatchdog uses the infrastructure for waiting
for the DEVICE_DELETED event, but the asynchronous delete
was not implemented.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1560976
For historical reasons we've used 32 bytes long static buffer for
storing PTY aliases. This breaks users scenario where they try to
start a machine with user alias consisting of "ua-$uuid".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If someone set a user alias or pcihole64 on an implicit controller,
we need to format it to migrate the domain properly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Joseph Richard <Joseph.Richard@windriver.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.
Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
Introduce qemu capabilities for these devices.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
S390 guests can only support a virtio-gpu-ccw device as a video
device. So set default video model type to VIR_DOMAIN_VIDEO_TYPE_VIRTIO
for S390 guests.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support the virtio-gpu-ccw device,
which can be used as a video device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1558317
Similarly to b133fac356 we need to look up alias of CCID
controller when constructing smartcard command line instead of
relying on broken assumption it will always be 'ccid0'. After
user aliases it can be anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Starting with commit id 'fab9d6e1' the formatting of:
{ "command-name", QEMU_CAPS_NAME },
was altered to:
{ "command-name", QEMU_CAPS_NAME},
and then commit id 'e2b05c9a' altered that to:
{ "command-name", QEMU_CAPS_NAME}
So, let's just fix that up to make things consistent with the
rest of the structures.
Signed-off-by: John Ferlan <jferlan@redhat.com>
virQEMUQAPISchemaTraverse would return previous-to-last queried item on
a query. It would not be a problem if checking if the given path exists
since error reporting works properly but if the caller is interested in
the result, it would be wrong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The JSON array was processed to the hash table used by the query apis in
the monitor code. Move it to a new helper in qemu_qapi.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Change the prefix of the functions to 'virQEMUQapi' and rename the two
public APIs so that the verb is put last.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
<memballoon model='none'/> is the only way to disable balloon driver
since libvirt will add one automatically if the memballoon element is
missing. In other words, there's no balloon device if model is 'none'
and generating an alias for it makes no sense. The alias will be ignored
when parsing the XML and it will disappear once libvirtd is restarted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit b4c2ac8d56 made a false assumption that IOMMU support necessary
for an mdev device to be assigned to a VM. Unlike direct PCI assignment,
IOMMU support is not needed for mediated devices, as the physical parent
device provides the isolation, therefore, simply checking for VFIO
presence is enough to successfully start a VM.
Luckily, this issue is not serious, since as of yet, libvirt mandates
mdevs to be pre-created prior to a domain's launch - if it is,
everything does work smoothly even with IOMMU disabled, because the
parent device will ensure the iommu groups we try to access exist.
However, if there are *no* IOMMU groups yet, thus no mdev exists yet, one
would see the following error:
"unsupported configuration: Mediated host device assignment requires VFIO
support"
The error msg above is simply wrong and doesn't even reflect the IOMMU
reality, so after applying this patch one would rather see the following
error in such case instead:
"device not found: mediated device '<UUID>' not found"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552127
When building command line for USB controllers we have to do more
than just put controller's alias onto the command line. QEMU has
concept of these joined USB controllers. For instance ehci and
uhci controllers need to create the same USB bus. To achieve that
the slave controller needs to refer the master controller. This
worked until we've introduced user aliases because both master
and slave had the same alias. With user aliases slave can have
different alias than master. Therefore, when generating command
line for slave we need to look up the master's alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
commit 7210cef452 'qemu: build command line for virtio input devices'
introduced an error, by checking if input bus type is
VIR_DOMAIN_DISK_BUS_VIRTIO.
Fix it by using the correct bus type for input devices.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit id '177db487' renamed 'qemuValidateDevicePCISlotsChipsets' to
'qemuDomainValidateDevicePCISlotsChipsets', but didn't adjust comment.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add typedef for the anonymous enum used for the driver features. This
allows the usage of the type in a switch statement and taking
advantage of the compilers feature to detect uncovered cases.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
introduce VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP to get ip address
of VM from the message of netlink RTM_GETNEIGH
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt provides full path to the backing file since commit
fec8f9c49a. This made qemu create the backend object but did not
delete it. This was fixed for unplug case in 4d83a6722f but not in case
of failure to hotplug the frontend. We'd leave the files behind which
would make memory unusable in case of hugepages.
https://bugzilla.redhat.com/show_bug.cgi?id=1553085
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Having to repeat "./job[1]/" XPath prefix for every single element or
attribute we want to parse is suboptimal. And even more so once we
further extract code from qemuDomainObjPrivateXMLParseJob into separate
functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit dc567cc22b introduced qemuDomainObjPrivateXMLParseJob, but forgot
to move "./job[1]/@type" parsing into it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
