With 'transaction' support we don't need to keep around the multipurpose
code which would create the snapshot if 'transaction' is not supported.
To simplify this add a new helper that just wraps the arguments for
'blockdev-snapshot-sync' operation in 'transaction' and use it instead
of qemuBlockSnapshotAddLegacy.
Additionally this allows to format the arguments prior to creating the
file for simpler cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we'd audit that we managed to format the data for the
'transaction' command rather than the (un)successful attempt to create
the snapshot.
Move the auditing code so that it can actually audit the result of the
'transaction' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the cleanup path we already checked whether a snapshot needed to be
taken by looking into the collected data. Use the same approach when
creating the snapshot command data and when committing the changes to the
domain definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we now always do the snapshot via the 'transaction' command we can
drop the code which would enter monitor for individual disk snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemu supports the 'transaction' command since v1.1.0
(52e7c241ac766406f05fa) and the 'blockdev-snapshot-sync' command since
v0.14.0-rc0 we need to keep the capability bits present since some qemu
downstreams (RHEL/CentOS 7 for example) chose to cripple qemu by
arbitrarily compiling out some stuff which was already present at that
time.
To simplify the crazy code just require both commands to be present at
the beginning of an external snapshot so that we can remove the case when
'transaction' would not be supported.
This also allows to drop any logic connected to the
VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC flag since snapshots are atomic with
the 'transaction' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a domain is configured to start on boot, it has a symlink to the
domain definition inside the autostart directory. If you rename this
domain, the definition is renamed too. The symlink need to be pointed to
this renamed file. This commit recreates the symlink after renaming the
XML file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1594985
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.
All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versionshttps://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson
Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.
Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.
Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When VIR_DOMAIN_SCHEDULER_GLOBAL_PERIOD is matched "cputune.global_period"
should be updated and not "cputune.period".
Signed-off-by: Katerina Koukiou <kkoukiou@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1600427
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This event is emitted on the monitor if one of pr-managers lost
connection to its pr-helper process. What libvirt needs to do is
restart the pr-helper process iff it corresponds to managed
pr-manager.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This argument is not used anymore. The only function that is
passing non-NULL (qemuDomainSaveMemory) does not actually care
for the value (after 23087cfdb) and every other caller just
passes NULL anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1585108
When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This was lost in c57f3fd2f8. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When updating device it's worth parsing live info too as users
might want to update it as well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.
This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591628
Attempting to use the FORCE flag for snapshot-revert was resulting
in failures because qemuProcessStart and qemuProcessStartCPUs were
using QEMU_ASYNC_JOB_START after a qemuProcessStop resulting in an
error when entering the monitor:
error: internal error: unexpected async job 6 type expected 0
So create a local @jobType, initialize to QEMU_ASYNC_JOB_START, and
change to QEMU_ASYNC_JOB_NONE if we end up in the --force path
where the qemuProcessStop is run before a Start and StartCPUs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If the the snapshot revert involves a forced revert option, then
let's not cause startup to change the genid flag in order to signify
that we're still running the same/previous guest and not some
snapshot reversion.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Use and set the @start_flags at the top of the RUNNING and PAUSED
transitions to GEN_VMID | PAUSED.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Promote the @start_flags to the top of the function, a
subsequent patch needs to use it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
There are two sets of functions here:
1) some functions talk on both monitor and agent monitor,
2) some functions only talk on agent monitor.
For functions from set 1) we need to use
qemuDomainObjBeginJobWithAgent() and for functions from set 2) we
need to use qemuDomainObjBeginAgentJob() only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that we have agent job we can grab it while freezing/thawing
guest file system before/after doing snapshot.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If measurement retrieval fails we'd forget to call ExitMonitor to unlock
the monitor.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reported-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Since it's being called with QEMU_ASYNC_JOB_NONE which is what
qemuDomainObjEnterMonitor is going to use with the internal helper,
let's use that one instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552092
If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.
The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591561
For reasons I don't understand my original patch of 75f0fd5112
freed not only the chardev from domain but also the one from
passed virDomainDeviceDefPtr. This caused no troubles until now,
because those two pointers were separate, but after I've
introduced virDomainDetachDeviceAlias() they became the same
resulting in double free on detach.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Free tmp even on failure.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
qemuDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch implements the internal driver API for launch event into
qemu driver. When SEV is enabled, execute 'query-sev-launch-measurement'
to get the measurement of memory encrypted through launch sequence.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Fix the error message to indicate what exactly is failing - that
the controller index provided matches an existing controller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On start up of libvirtd the worker pool of the QEMU driver must be
initialized before trying to reconnect to all the running QEMU
instances. Otherwise segmentation faults can occur if there are QEMU
monitor events emitted.
#0 __GI___pthread_mutex_lock
#1 0x000003fffdba9e62 in virMutexLock
#2 0x000003fffdbab2dc in virThreadPoolSendJob
#3 0x000003ffd8343b70 in qemuProcessHandleSerialChanged
#4 0x000003ffd836a776 in qemuMonitorEmitSerialChange
#5 0x000003ffd8378e52 in qemuMonitorJSONHandleSerialChange
#6 0x000003ffd8378930 in qemuMonitorJSONIOProcessEvent
#7 0x000003ffd837edee in qemuMonitorJSONIOProcessLine
#8 0x000003ffd837ef86 in qemuMonitorJSONIOProcess
#9 0x000003ffd836757a in qemuMonitorIOProcess
#10 0x000003ffd836863e in qemuMonitorIO
#11 0x000003fffdb4033a in virEventPollDispatchHandles
#12 0x000003fffdb4055e in virEventPollRunOnce
#13 0x000003fffdb3e782 in virEventRunDefaultImpl
#14 0x000003fffdc89400 in virNetDaemonRun
#15 0x000000010002a816 in main
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Previous patch naively removed all code relevant to disk format
checking. The semantics now dictate that the format check when creating
external snapshots is now impossible as we always fill in the format for
disks in domain definition in the post-parse callback.
Remove the impossible code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The option is insecure and it has been long enough for users to migrate
their disk files to use explicit format. Drop the option and related
code.
The config parser still parses it and rejects statup if it's still
present in the config in enabled state.
The augeas lens is also kept so that users can disable it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The code that detaches the device from persistent definition copies the
persistent definition first so that it can easily be rolled back. The
actual detaching is then made in the copy which is assigned back on
success (if the live operation succeeded as well).
This is not the case in qemuDomainDetachDeviceAliasLiveAndConfig where
the definition was copied and put back, but the detaching happened from
the other object which was overwritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
virConnectGetDomainCapabilities needs to lookup QEMU capabilities
matching a specified binary, architecture, virt type, and machine type
while using default values when any of the parameters are not provided
by the user. Let's extract the lookup code into
virQEMUCapsCacheLookupDefault to make it reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainDetachDeviceAlias API is designed so that it only
sends detach request to qemu. It's user's responsibility to wait
for DEVICE_DELETED event, not libvirt's. Add @async flag to
qemuDomainDetach*Device() functions so that caller can chose if
detach is semi-synchronous (old virDomainDetachDeviceFlags()) or
fully asynchronous (new virDomainDetachDeviceFlags()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we are overwriting @ret multiple times makes it
difficult to see what is actually happening here. Follow our
traditional pattern where @ret is initialized to -1, and set to 0
only in case we know we succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Funny, we obtain driver caps at the beginning of the function,
but then for unknown reason access driver->caps directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before we generate the command line for qemu, if the domain about to
be launched desires to utilize the VM Generation ID functionality, then
handle both the regenerating the GUID value for backup recovery (restore
operation) and the startup after snapshot as both require a new GUID to
be generated to allow the guest operating system to recognize the VM
is re-executing something that has already executed before.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
According to virDomainScreenshot() documentation, screens are
numbered sequentially. e.g. having two graphics cards, both with
four heads, screen ID 5 addresses the second head on the second
card.
But apart from that, there's nothing special happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit [1] dropped support for synchronous block job cancel.
This patch erases remnants from comments.
[1] commit 2350d101 "qemu: Remove support for legacy block jobs"
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The pointer to the qemu driver is already included in domain object's
private data, so does not need to be passed as yet another parameter
when the domain object is already passed.
Also removes parameter 'driver' from functions which had it just because of
qemuBlockJobUpdate.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.
All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The 'domrename' command needs to check if the new domain name contains
the slash character. This character is not accepted by libvirt XML
definition because it is an invalid char (see Cole's commit b1fc6a7b7).
This commit enhace the 'domrename' command adding this check.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1333232
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virStorageFileSupportsSecurityDriver and
virStorageFileSupportsAccess currently just return a boolean
value. This is ok because they don't have any failure scenarios
but a subsequent patch is going to introduce potential failure
scenario. This changes their return type from a boolean to an
int with values -1, 0, 1.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virStorageFileGetBackingStoreStr method has overloaded the NULL
return value to indicate both no backing available and a fatal
error dealing with it.
The caller is thus not able to correctly propagate the error
messages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When qemu does not support changing of the backing store string, we'd
reaport that block pull is not supported instead of block commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We store the flags passed to the API which started the migration. Let's
use them instead of a separate bool to check if post-copy migration was
requested.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started QEMU_ASYNC_JOB_DUMP
and we can use them to check whether a memory-only dump is running.
There's no need for a specific bool flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
migrate_cancel QMP command cannot be used for cancelling memory-only
dumps and priv->job.dump_memory_only is used for reporting an error if
someone calls virDomainAbortJob when memory-only dump job is running.
Since commit 150930e309 the dump_memory_only flag is set only if
dump-guest-memory command was called without the detach parameter. This
would incorrectly allow libvirt to send migrate_cancel while the
detached memory-only dump is running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an async job is running, we sometimes need to know how it was
started to distinguish between several types of the job, e.g., post-copy
vs. normal migration. So far we added a specific bool item to
qemuDomainJobObj for such cases, which doesn't scale very well and
storing such bools in status XML would be painful so we didn't do it.
A better approach is to store the flags passed to the API which started
the async job, which can be easily stored in status XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API is renamed as qemuMigrationParamsGetULL and it can be used with
any migration parameter stored as unsigned long long.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use this internal structure only in qemu_migration_params.c and change
other non-test users to use the high level qemuMigrationParams struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By merging qemuMigrationAnyCompressionParse into
qemuMigrationParamsSetCompression we can drop the useless intermediate
qemuMigrationCompression structure and parse compression related typed
parameters and flags directly into qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since every parameter or capability set in qemuMigrationCompression
structure is now reflected in qemuMigrationParams structure, we can
replace qemuMigrationAnyCompressionDump with a new API which will work
on qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call this API explicitly in the migration code. We
can pass the compression parameters to qemuMigrationParamsFromFlags and
it can internally call qemuMigrationParamsSetCompression to apply them
to the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate the calls up the stack to the point where
qemuMigrationParamsFromFlags is called. The end goal achieved in the
following few patches is to merge compression parameters into the
general migration parameters code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every migration entry point in qemu_driver is supposed to call
qemuMigrationParamsFromFlags to transform flags and parameters into
qemuMigrationParams structure and pass the result to qemuMigration*
APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration parameters and capabilities are supposed to be set on
both sides of migration while others should only be set on one side. For
example, CPU throttling parameters make no sense on the destination and
they can be used even if the destination is too old to support them.
To make qemuMigrationParamsFromFlags more general and usable on both
sides of migration, we need to tell it what side it's been called on.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently migration parameters are stored in a structure which mimics
the QEMU migration parameters handled by query-migrate-parameters and
migrate-set-parameters. The new structure will become a libvirt's
abstraction on top of QEMU migration parameters, capabilities, and
related stuff.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will get a bit more complicated soon and storing it on a stack with
{0} initializer will no longer work. We need a proper constructor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our *Free functions usually do not take a double pointer and the caller
has to make sure it doesn't use the stale pointer after the *Free
function returns.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the end, this will allow us to have most of the logic around
migration parameters and capabilities done in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now called qemuMigrationParamsFromFlags to better
reflect what it is doing: taking migration flags and params and
producing a struct with QEMU migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Avoid the need for the drivers to explicitly check for a NULL path by
making sure it is at least the empty string.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virDrvConnectOpen method is supposed to handle both
opening an explicit URI and auto-probing a driver if no URI is
given. Introduce a dedicated virDrvConnectURIProbe method to enable the
probing functionality to be split from the driver opening functionality.
It is still possible for NULL to be passed to the virDrvConnectOpen
method after this change, because the remote driver needs special
handling to enable probing of the URI against a remote libvirtd daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Make the function more usable by returning the full disk definition and
fix the only caller for the new semantics. The new name for the function
is virDomainDiskDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Rather than trying to prevent stealing of the 'actions' virJSONValue
into the monitor command replace the code so that it does the same
thing, since 'actions' was actually not really used after calling the
monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add typedef for the anonymous enum used for the driver features. This
allows the usage of the type in a switch statement and taking
advantage of the compilers feature to detect uncovered cases.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
introduce VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP to get ip address
of VM from the message of netlink RTM_GETNEIGH
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix this common typo and assign a value rather than implicitly
type-casted comparison result. Introduced by commit b6a264e855.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This partially reverts 82592551cb.
When migrating a domain, qemuMigrationDstPrepareAny() is called
which eventually calls qemuProcessLaunch(conn = NULL, flags =
VIR_QEMU_PROCESS_START_AUTODESTROY); But the very first thing
that qemuProcessLaunch does is check if AUTODESTROY flag is set
and @conn is not NULL. Well, it is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When calling virDomainDefCompatibleDevice to check a new device during
device update, we need to pass the original device which is going to be
updated in addition to the new device. Otherwise, the function can
report false conflicts.
The new argument is currently ignored by virDomainDefCompatibleDevice,
but this will change in the following patch.
https://bugzilla.redhat.com/show_bug.cgi?id=1546971
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This flag is only used for tests. Let's instead overload bind syscall
in mocks where it is not done yet.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Host tcp4/tcp6 ports is a global resource thus we need to make
port accounting also global or we have issues described in [1] when
port allocator ranges of different instances are overlapped (which
is by default for qemu for example).
Let's have only one global port allocator object that take care
of the entire ports range (0 - 65535) and introduce port range object
for clients to specify desired auto allocation band.
[1] https://www.redhat.com/archives/libvir-list/2017-December/msg00600.html
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Ensure all enum cases are listed in switch statements, or cast away
enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is very difficult while reading the migration code trying to
understand whether a particular function is being called on the src side
or the dst side, or either. Putting "Src" or "Dst" in the method names will
make this much more obvious. "Any" is used in a few helpers which can be
called from both sides.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU code does not work well with too big numbers on the JSON monitor so
our monitor code supports sending only numbers up to LLONG_MAX. Avoid a
weird error message by limiting the size of the 'bandwidth' parameter
for block copy.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1532542
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The qemuMigrationPrecreateStorage method needs a connection
to access the storage driver. Instead of passing it around,
open it at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's a few places in startup code paths which pass around a
virConnectPtr which is no longer required. Specifically, the
qemuProcessStart() method now only requires a non-NULL connection if
autodestroy is requested.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When setting up graphics, we sometimes need to resolve networks,
requiring the caller to pass in a virConnectPtr, except sometimes they
pass in NULL. Use virGetConnectNetwork() to acquire the connection to
the network driver when it is needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During domain startup there are many places where we need to acquire
secrets. Currently code passes around a virConnectPtr, except in the
places where we pass in NULL. So there are a few codepaths where ability
to start guests using secrets will fail. Change to acquire a handle to
the secret driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than expecting callers to pass a virConnectPtr into the
virDomainDiskTranslateSourcePool() method, just acquire a connection
to the storage driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a long standing hack to pass a virConnectPtr into the
qemuMonitorStartCPUs method, so that when the text monitor prompts
for a disk password, we can lookup virSecretPtr objects. This causes
us to have to pass a virConnectPtr around through countless methods
up the call chain....except some places don't have any virConnectPtr
available so have always just passed NULL. We can finally fix this
disastrous design by using virGetConnectSecret() to open a connection
to the secret driver at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We forgot to free alloced mem when failed to
dup ifname or macaddr.
Also use VIR_STEAL_PTR to simplify codes.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virStorageTranslateDiskSourcePool method modifies a virDomainDiskDef
to resolve any storage pool reference. For some reason this was added
into the storage driver code, despite working entirely in terms of the
public APIs. Move it into the domain conf file and rename it to match the
object it modifies.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify network device bandwidth for interfaces with
type=network. This introduces a callback system to allow us to decouple
the QEMU driver from the network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver loadable module needs to be able to resolve all ELF
symbols it references against libvirt.so. Some of its symbols can only
be resolved against the storage_driver.so loadable module which creates
a hard dependancy between them. By moving the storage file backend
framework into the util directory, this gets included directly in the
libvirt.so library. The actual backend implementations are still done as
loadable modules, so this doesn't re-add deps on gluster libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it may be possible that the state is unknown in some cases we
should store it as a tristate so that other code using it can determine
whether the state was updated.
Don't extract the halted state into a separate array, but rater access
the vcpu structures directly. We still need to call the vcpu helper to
retrieve the performance statistics though.
https://bugzilla.redhat.com/show_bug.cgi?id=916061
If the QEMU version running is new enough (based on the DUMP_COMPLETED
event), then we can add a 'detach' boolean to the dump-guest-memory
command in order to tell QEMU to run in a thread. This ensures that we
don't lock out other commands while the potentially long running dump
memory is completed.
This allows the usage of a qemuDumpWaitForCompletion which will wait
for the event while the qemuDomainGetJobInfoDumpStats can be used via
qemuDomainGetJobInfo in order to query QEMU to determine how far along
the job is.
Now that we have a true async job, we'll only set the dump_memory_only
flag only when @detach=false; otherwise, we note that the job is a
for stats dump this allows the opposite end for job info to determine
what to copy.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add an API to allow fetching the memory only dump statistics
for a job via the qemuDomainGetJobInfo API.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Define the qemuMonitorDumpStats as a new job JobStatsType to handle
being able to get memory dump statistics. For now do nothing with
the new TYPE_MEMDUMP.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a TYPE_SAVEDUMP so that when coalescing stats for a save or
dump we don't needlessly try to get the mirror stats for a migration.
Other conditions can still use MIGRATION and SAVEDUMP interchangably
including usage of the @migStats field to fetch/store the data.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Convert the stats field in _qemuDomainJobInfo to be a union. This
will allow for the collection of various different types of stats
in the same field.
When starting the async job that will end up being used for stats,
set the @statsType value appropriately. The @mirrorStats are
special and are used with stats.mig in order to generate the
returned job stats for a migration.
Using the NONE should avoid the possibility that some random
async job would try to return stats for migration even though
a migration is not in progress.
For now a migration and a save job will use the same statsType
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add and use qemuProcessEventFree for freeing qemuProcessEvents. This
is less error-prone as the compiler can help us make sure that for
every new enumeration value of qemuProcessEventType the
qemuProcessEventFree function has to be adapted.
All process*Event functions are *only* called by
qemuProcessHandleEvent and this function does the freeing by itself
with qemuProcessEventFree. This means that an explicit freeing of
processEvent->data is no longer required in each process*Event
handler.
The effectiveness of this change is also demonstrated by the fact that
it fixes a memory leak of the panic info data in
qemuProcessHandleGuestPanic.
Reported-by: Wang Dong <dongdwdw@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Extract out the parts of qemuDomainGetJobStatsInternal that get
the migration stats. We're about to add the ability to get just
dump information.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use the DEVICE_MISSING error code when helpers fail to find
the requested device. This makes it easier for consumers to
key off the error code rather than the error message.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After processing the processEvent->data for a qemuProcessEventHandler
callout, it's expected that the called processEvent->eventType helper
will perform the proper free on the data field. In this case it's
a qemuMonitorEventPanicInfoPtr.
Commit id '162efa1a' added support hotplug a redirdev, but
did not add the hot unplug. This patch will add that support
to allow usage of the detach-device --live on the device.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
A microcode update can cause the CPUID bits to change; an example
from the past was the update that disabled TSX on several Haswell
and Broadwell machines.
Therefore, place microcode version in the virQEMUCaps struct and
XML, and rebuild the cache if the versions do not match.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1522706
If domain is active, but the undefine API was called without the
VIR_DOMAIN_UNDEFINE_KEEP_NVRAM flag set, the following incorrect
error message is produced:
error: Requested operation is not valid: cannot delete inactive domain with nvram
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==899== 39 bytes in 1 blocks are definitely lost in loss record 732 of 1,003
==899== at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==899== by 0x8B68CE7: vasprintf (in /lib64/libc-2.25.so)
==899== by 0x55498D2: virVasprintfInternal (virstring.c:708)
==899== by 0x55499E7: virAsprintfInternal (virstring.c:729)
==899== by 0x2BECFFF0: qemuGetMemoryBackingBasePath (qemu_conf.c:1757)
==899== by 0x2BF23225: qemuStateInitialize (qemu_driver.c:893)
==899== by 0x563073D: virStateInitialize (libvirt.c:770)
==899== by 0x124CC4: daemonRunStateInit (libvirtd.c:834)
==899== by 0x55521CD: virThreadHelper (virthread.c:206)
==899== by 0x88D9686: start_thread (in /lib64/libpthread-2.25.so)
==899== by 0x8BEAEFE: clone (in /lib64/libc-2.25.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Creating a snapshot would introduce a possibly unsupported member for
sharing into the backing chain. Add a check to prevent that from
happening.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
When doing block commit we need to allow write for members of the
backing chain so that we can commit the data into them.
qemuDomainDiskChainElementPrepare was used for this which since commit
786d8d91b4 calls qemuDomainNamespaceSetupDisk which has very adverse
side-effects, namely it relabels the nodes to the same label it has in
the main namespace. This was messing up permissions for the commit
operation since its touching various parts of a single backing chain.
Since we are are actually not introducing new images at that point add a
flag for qemuDomainDiskChainElementPrepare which will refrain from
calling to the namespace setup function.
Calls from qemuDomainSnapshotCreateSingleDiskActive and
qemuDomainBlockCopyCommon do introduce new members all calls from
qemuDomainBlockCommit do not, so the calls are anotated accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1506072
This is similar to the virDomainQemuMonitorCommand API, it can change
the domain state in a way that libvirt may not understand.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
