Some of the test cases had only been added to the xml2argv
test program and not to the xml2xml one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of the differences, such as those in the domain name or
amount of memory, are fairly harmless, but they still make it
more cumbersome than necessary to directly compare different
input (and output) files.
More importantly, the use of unversioned machine types in some
of the test cases results in the descriptor-based autoselection
logic being effectively skipped, because the compatible machine
types as listed in them are only the versioned variants.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already the case for the vast majority, but a few are
using explicit capabilities lists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most test cases are on 64-bit architectures already, but there
are a couple of exceptions.
Right now this works, but it will no longer fly after some
upcoming changes. Prepare for those by switching away from
32-bit architectures.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already do this in qemuxml2argvtest.
Right now setting this doesn't change anything, but it will
become relevant later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU's "reconnect" option of "-netdev stream" tells QEMU to
periodically (period is given in seconds as an argument to the option)
attempt to reconnect to the same passt socket to which it had
originally connected to. This is useful in cases where the passt
process terminates, and libvirtd starts a new passt process in its
place (which doesn't happen yet, but will happen automatically after
an upcoming patch in this series).
Since there is no real hueristic for determining the "best" value of
the reconnect interval, rather than clutter up config with a knob that
nobody knows how to properly twiddle, we just set the reconnect timer
to 5 seconds.
"-netdev stream" first appeared in QEMU 7.2.0, but the reconnect
option won't be available until QEMU 8.0.0, so we need to check QEMU
capabilities just in case someone is using QEMU 7.2.0 (and thus can
support passt backend, but not reconnect)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Detect that the 'stream' netdev backend supports reconnecting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 5af6134e I had added a new capability that is true if QEMU
allows "-netdev stream", but somehow neglected to actually check it in
commit a56f0168d when hooking up passt support to qemu. This isn't
catastrophic, since QEMU itself will still report an error, but that
error isn't as easy to understand as a libvirt-generated error.
Fixes: a56f0168d5
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability detects the availability of the pvpanic-pci
device that is required in order to use pvpanic on Arm (original
pvpanic is an emulated ISA device, for which Arm does not have
support).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Whilst reviewing a patch upstream (that ended up as
v9.0.0-200-g092176e5ec), I realized we don't have a single
xml2xml test for CH driver. Well, introduce the test with one
simple test case for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When running "virsh domcapabilities" on a s390x host, all the CPU
models show up with vendor='unknown' - which sounds kind of weird
since the vendor of these mainframe CPUs is well known: IBM.
All CPUs starting with either "z" or "gen" match a real mainframe
CPU by IBM, so let's return the string "IBM" for those now.
The only remaining ones are now the artifical "qemu" and "max"
models from QEMU itself, so it should be OK to get an "unknown"
vendor for those two.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Boris Fiuczynski<fiuczy@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virURIFormat() function either returns a string, or aborts
(on OOM). There's no way this function can return NULL (as of
v7.2.0-rc1~277). Therefore, it doesn't make sense to check its
retval against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With the current way the myInit() is written, it's fairly easy to
miss initialization of @subsys variable as the variable is
allocated firstly on the stack and then it's assigned to
hostdev[i] which was allocated using g_new0() (this it is
containing nothing but all zeroes).
Make the subsys point to the corresponding member in hostdev[i]
from the start. This way only the important bits are overwritten
and the rest stays initialized to zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
With recent work on storing original PCI stats in
_virDomainHostdevSubsysPCI struct, the virhostdevtest can across
a latent bug we had. Only some parts of the
virDomainHostdevSubsys structure are initialized. Incidentally,
subsys->u.pci.origstates is not one of them. This lead to
unexpected crashes at runtime.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use virDomainDeviceType as type and update all switch statements which
didn't mention all possible values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <origstates> XML element captures private data of a PCI device
needed to restore it after a VM is started. Unfortunately at the point
when it was added we didn't yet have the existing private data
infrastructure.
Since the element is parsed only in cases similar to the status XML we
need to test it there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To ensure that we can hot-unplug the disk including the associated fdset
we need to store the fdset ID in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Copy the pointer to qemuFDPass into struct qemuBlockStorageSourceAttachData
so that it can be used from qemuBuildBlockStorageSourceAttachDataCommandline
rather than looping again in qemuBuildDiskSourceCommandLineFDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The <tune/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing specific about net-mtu test. In fact, if device
addresses are filled in (and some elements reordered), we get the
same XML. Make those changes to the input XML and turn the output
XML to be a symlink.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The iTCO watchdog is part of the q35 machine type since its inception,
we just did not add it implicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'domaincapstest' is currently skipping RISC-V tests. Let's enable it.
The decision of enabling the "virt" machine is based on the idea that
this is the most used QEMU RISC-V machine in the community and it's the
most likely to be widely supported in the long run.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Update RISC-V capabilities for the QEMU 8.0.0 cycle. Changes made are
based on the JSONification of device parameters.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Use g_autoptr() for virNWFilterDef and virNWFilterRuleDef and remove
unnecessary label.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
net-user-passt.args was generated early during testing of the passt
qemu commandline, when qemuxml2argvtest was using
DO_TEST("net-user-passt"). This was later changed to
DO_TEST_CAPS_LATEST(), so the file net-user-passt.x86_64-latest.args
is used instead, but the original (now unused) test file was
accidentally added to the original patch. This patch removes it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Currently, the ThreadContext object is generated whenever we see
.host-nodes attribute for a memory-backend-* object. The idea was
that when the backend is pinned to a specific set of host NUMA
nodes, then the allocation could be happening on CPUs from those
nodes too. But this may not be always possible.
Users might configure their guests in such way that vCPUs and
corresponding guest NUMA nodes are on different host NUMA nodes
than emulator thread. In this case, ThreadContext won't work,
because ThreadContext objects live in context of the emulator
thread (vCPU threads are moved around by us later, when emulator
thread finished its setup and spawned vCPU threads - see
qemuProcessSetupVcpus()). Therefore, memory allocation is done by
emulator thread which is pinned to a subset of host NUMA nodes,
but tries to create a ThreadContext object with a disjoint subset
of host NUMA nodes, which fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
passt support requires "-netdev stream", which was added to QEMU in
qemu-7.2.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initial support for network devices using passt (https://passt.top)
for the backend connection will require:
* new attributes of the <backend> subelement:
* "type" that can have the value "passt" (to differentiate from
slirp, because both slirp and passt will use <interface
type='user'>)
* "logFile" (a path to a file that passt should use for its logging)
* "upstream" (a netdev name, e.g. "eth0").
* a new subelement <portForward> (described in more detail later)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the qemuxml2xml variant and add output data for qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new argument type for testQemuInfoSetArgs named ARG_FD_GROUP
which allows users to instantiate tests with populated FD passing hash
table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Deleting external snapshots will require configuring autofinalize to
synchronize the block jobs for disks withing single snapshot in order to
be able safely abort of one of the jobs fails.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Upcoming snapshot deletion code will require that multiple commit jobs
are finished in sync. To allow aborting then if one fails we will need
to use manual finalization of the jobs.
This commit implements the monitor code for `job-finalize`.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until commit 629282d884, using mode=restrictive caused
virNumaSetupMemoryPolicy() to be called from qemuProcessHook(),
and that in turn resulted in virNumaNodesetIsAvailable() being
called and the nodeset being validated.
After that change, the only validation for the nodeset is the one
happening in qemuBuildMemoryBackendProps(), which is skipped when
using mode=restrictive.
Make sure virNumaNodesetIsAvailable() is called whenever a
nodeset has been provided by the user, regardless of the mode.
https://bugzilla.redhat.com/show_bug.cgi?id=2156289
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The one for mode=strict fails, as expected, while the one for
mode=restrictive currently doesn't even though it should. The
next commit will address the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test is superseded by 'disk-backing-chains-(no)index' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit da9f3cd84b added the seclabel example into the
'disk-backing-chains' case.
Since the only thing that 'disk-backing-chains' tests which
'disk-backing-chains-(no)index' don't test is the seclabel we'll be able
to remove the test case if we add the seclabel example.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
