Move from virnwfilterobj.h to virnwfilterobj.c.
Create the virNWFilterObjListNew() API in order to allocate.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structure to virnwfilterobj.c and create necessary accessor API's
for the various fields.
Also make virNWFilterObjFree static since there's no external callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
That function is able to configure coalesce settings for an interface,
similarly to 'ethtool -C'. This function also updates back the
structure so that it contains actual data on the device (if the device
doesn't support some settings kernel might just return 0 and not set
whatever is not supported), so this way we'll have up-to-date
information in the live domain XML.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Sometimes we want to call virCPUGetHost only when it is implemented for
a given architecture to avoid logging expected and possibly misleading
errors. The new virCPUGetHostIsSupported API may be used to guard such
calls to virCPUGetHost.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use "virNetworkObj" as a prefix for any external API in virnetworkobj.
Also a couple of functions were local to virnetworkobj.c, so remove their
external defs in virnetworkobj.h.
Rename the API to be a better description of what it does. Besides, a
subsequent patch will rename virNetworkAssignDef to virNetworkObjAssignDef
so rather than make that patch confusing we'll take the intermittent step
in this patch.
Move all the virNetworkObj related API/data structures into their own
modules virnetworkobj.{c,h} from the network_conf.{c,h}
Purely code motion at this point plus adjustments to cleanly build
Mostly code motion to move nwfilterConnectListNWFilters into nwfilterobj.c
and rename to virNWFilterObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion from nwfilter_driver to virnwfilterobj with one caveat
to add the virNWFilterObjListFilter typedef and pass it as an 'aclfilter'
argument to allow for future possible test driver adjustments to count
the number of filters (similar to how node device has done this).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion to move storageConnectList[Defined]StoragePools
and similar test driver code into virstorageobj.c and rename to
virStoragePoolObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOf[Defined]StoragePools API into virstorageobj.c from
storage_driver and test_driver. The only real difference between the
two is the test driver doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion to move storagePoolListVolumes code into virstorageobj.c
and rename to virStoragePoolObjVolumeGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfVolumes API into virstorageobj.c from storage_driver and
test_driver. The only real difference between the two is the test driver
doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the *ListDevice API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API. The name of the new API follows that
of other drivers to "GetNames".
NB: Change some variable names to match what they really are - consistency
with other drivers. Also added a clear of the input names.
This also allows virNodeDeviceObjHasCap to be static to virnodedeviceobj
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfDevices API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectListInterfaces and testConnectListDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectNumOfInterfaces and testConnectNumOfDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This new internal API makes a copy of virCPUDef while removing all
features which would block migration. It uses cpu_map.xml as a database
of such features, which should only be used as a fallback when we cannot
get the data from a hypervisor. The main goal of this API is to decouple
this filtering from virCPUUpdate so that the hypervisor driver can
filter the features according to the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Having to use cpuBaseline with VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES
flag to expand CPU features is strange. Not to mention that cpuBaseline
can only expand host CPU definitions (i.e., it completely ignores
feature policies). The new virCPUExpandFeatures API is designed to work
with both host and guest CPU definitions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The global functions virNetDevReplaceMacAddress(),
virNetDevReplaceNetConfig(), virNetDevRestoreMacAddress(), and
virNetDevRestoreNetConfig() are no longer used, as their functionality
has been replaced by virNetDev(Save|Read|Set)NetConfig().
The static functions virNetDevReplaceVfConfig() and
virNetDevRestoreVfConfig() were only used by the above-named global
functions that were removed.
These three functions are destined to replace
virNetDev(Replace|Restore)NetConfig() and
virNetDev(Replace|Restore)MacAddress(), which both do the save and set
together as a single step. We need to separate the save, read, and set
steps because there will be situations where we need to do something
else in between (in particular, we will need to rebind a VF's driver
after save but before set).
This patch creates the new functions, but doesn't call them - that
will come in a subsequent patch. Note that the new functions to
read/write the file that stores the original network config now uses
JSON rather than plaintext (it still recognizes the old format as well
though, so it won't get confused during an upgrade).
Keep track of the assigned mediated devices the same way we do it for
the rest of hostdevs. Methods like 'Prepare', 'Update', and 'ReAttach'
are introduced by this patch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Beside creation, disposal, getter, and setter methods the module exports
methods to work with lists of mediated devices.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This way more drivers can utilize the functionality without copying
the code. And we can therefore test it in one place for all of them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That file has only two exported files and each one of them has
different naming. virNode is what all the other files use, so let's
use it. It wasn't used before because the clash with public API
naming, so let's fix that by shortening the name (there is no other
private variant of it anyway).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While on that, drop support for kernels from RHEL-5 era (missing
cpu/present file). Also add some useful functions and export them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
By using this we are able to easily switch the sysfs path being
used (fake it). This will not only help tests in the future but can
be also used from files where the code is duplicated currently.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
These helpers are doing just a read and covert the value, but they
properly size the read limit, handle additional whitespace characters,
and unify error reporting.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commits eaf18f4c2b and 86dd9fac0f separated util/host{cpu,mem}
stuff from nodeinfo, but did not adjust the syms file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It is everywhere else. I even remember one of our scripts failing if
the newline is missing, but it doesn't happen currently.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Guests are handled in callers, but if something goes wrong (when it
cannot be added to virCapabilities, for example), there's no way for
them to free it properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Both QEMU and bhyve are using the same function for setting up the CPU
in virCapabilities, so de-duplicate it, save code and time, and help
other drivers adopt it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
The function has very specific semantics. Split out the part that parses
the backing store specification string into a separate helper so that it
can be reused later while keeping the wrapper with existing semantics.
Note that virStorageFileParseChainIndex is pretty well covered by the
test suite.
Given an SRIOV PF netdev name (e.g. "enp2s0f0") and VF#, this new
function returns the netdev name of the referenced VF device
(e.g. "enp2s11f6"), or NULL if the device isn't bound to a net driver.
This function unbinds a device from its driver, then immediately
rebinds it to its driver again. The code for this new function is just
the 2nd half of virPCIDeviceBindWithDriverOverride(), so that
function's 2nd half is replaced with a call to virPCIDeviceRebind().
This patch splits out the part of virNetDevTapCreateInBridgePort()
that would need to be re-done if an existing tap device had to be
re-attached to a bridge, and puts it into a separate function. This
can be used both when an existing domain interface config is updated
to change its connection, and also to re-attach to the "same" bridge
when a network has been stopped and restarted. So far it is used for
nothing.
This function provides the bridge/bond device that the given network
device is attached to. The return value is 0 or -1, and the master
device is a char** argument to the function - this is needed in order
to allow for a "success" return from a device that has no master.
When enabling IPv6 on all interfaces, we may get the host Router
Advertisement routes discarded. To avoid this, the user needs to set
accept_ra to 2 for the interfaces with such routes.
See https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
on this topic.
To avoid user mistakenly losing routes on their hosts, check
accept_ra values before enabling IPv6 forwarding. If a RA route is
detected, but neither the corresponding device nor global accept_ra
is set to 2, the network will fail to start.
virNetlinkCommand() processes only one response message, while some
netlink commands, like route dumping, need to process several.
Add virNetlinkDumpCommand() as a virNetlinkCommand() sister.
Use "virStoragePoolObj" as a prefix for any external API in virstorageobj.
Also a couple of functions were local to virstorageobj.c, so remove their
external defs iin virstorageobj.h.
NB: The virStorageVolDef* API's won't change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move all the StoragePoolObj related API's into their own module
virstorageobj from the storage_conf
Purely code motion at this point, plus adjustments to cleanly build
Signed-off-by: John Ferlan <jferlan@redhat.com>
When starting a domain with custom guest CPU specification QEMU may add
or remove some CPU features. There are several reasons for this, e.g.,
QEMU/KVM does not support some requested features or the definition of
the requested CPU model in libvirt's cpu_map.xml differs from the one
QEMU is using. We can't really avoid this because CPU models are allowed
to change with machine types and libvirt doesn't know (and probably
doesn't even want to know) about such changes.
Thus when we want to make sure guest ABI doesn't change when a domain
gets migrated to another host, we need to update our live CPU definition
according to the CPU QEMU created. Once updated, we will change CPU
checking to VIR_CPU_CHECK_FULL to make sure the virtual CPU created
after migration exactly matches the one on the source.
https://bugzilla.redhat.com/show_bug.cgi?id=822148https://bugzilla.redhat.com/show_bug.cgi?id=824989
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move the bulk of createVport and rename to virNodeDeviceCreateVport.
Remove the deleteVport entirely and replace with virNodeDeviceDeleteVport
Signed-off-by: John Ferlan <jferlan@redhat.com>
The function is actually in virutil.c, but prototyped in virfile.h.
This patch fixes that by renaming the function to virWaitForDevices,
adding the prototype in virutil.h and libvirt_private.syms, and then
changing the callers to use the new name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the virStoragePoolSourceAdapter from storage_conf.h and rename
to virStorageAdapter.
Continue with code realignment for brevity and flow.
Signed-off-by: John Ferlan <jferlan@redhat.com>
cpuNodeData has always been followed by cpuDecode as no hypervisor
driver is really interested in raw CPUID data for a host CPU. Let's
create a new CPU driver API which returns virCPUDefPtr directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf
Purely code motion at this point, plus adjustments to cleanly build.
Whole implementations along with helper totalling screens of code were
conditionally compiled. That made the code totally unreadable and
untestable. Rename functions to have the architecture in the name so
that all can be compiled at the same time and introduce header to allow
testing them all.
After the system has been booted, it should not change.
Cache the return value of virSystemdHasMachined.
Allow starting and terminating machines with just one
DBus call, instead of three, reducing the chance of
the call timing out.
Also introduce a small function for resetting the cache
to be used in tests.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new API is called virCPUDataFree. Individual CPU drivers are no
longer required to implement their own freeing function unless they need
to free architecture specific data from virCPUData.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will eventually replace virQEMUBuildBufferEscapeComma, however
it's not possible right now. Some parts of the code that uses the
old function needs to be refactored.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Rework the code to perform the various searches by parent, parent_wwnn/
parent_wwpn, parent_fabric_wwn, or vport capable in order to return the
'parent_host' number that is vHBA capable.
The former virNodeDeviceGetParentHost is renamed to add the ByParent
on it fixes an issue where if no parent was supplied in the XML to
create the vHBA, then virNodeDeviceFindByName was called with a NULL
second parameter which had bad results.
The reworked code will make the various calls to fetch the NPIV host
by the passed parameter options or if none are provided find a vport
capable NPIV HBA to perform the create. If the call is from the delete
path, then this option won't be allowed.
Each of virNodeDeviceGetParentHostBy* functions is now static, so
remove them external definitions.
A secondary benefit of this is the test_driver now can make use of
the new API to add some new tests to test the various creation options.
Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.
Take the opporunity to also change the function names and in one case
the parameters slightly
Use the new virNodeDeviceGetParentName instead. Modify the callers to
build the node device scsi_host# name string in order to call the new
function so that proper lookup occurs.
Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.
Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.
While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.
So rather than comparing 2 paths (strings) as they are, which can very
easily lead to unnecessary errors (e.g. in storage driver) that the paths
are not the same when in fact they'd be e.g. just symlinks to the same
location, we should put our best effort into resolving any symlinks and
canonicalizing the path and only then compare the 2 paths for equality.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patchs allows to set the timeout value used for all
openvswitch calls. The default timeout value remains as
before at 5 seconds.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We will need to traverse the symlinks one step at the time.
Therefore we need to see where a symlink is pointing to.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a simple wrapper over mount(). However, not every system
out there is capable of moving a mount point. Therefore, instead
of having to deal with this fact in all the places of our code we
can have a simple wrapper and deal with this fact at just one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Other drivers (like qemu) would like to know if the namespaces
are available therefore it makes sense to move this function to
a shared module.
At the same time, this function had some default namespaces that
are checked with every call. It is not necessary - let callers
pass just those namespaces they are interested in.
With the move the function is renamed to
virProcessNamespaceAvailable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Surprisingly there was a virDomainPCIAddressReleaseAddr() function
already, but it was completely unused. Since we don't reserve entire
slots at once any more, there is no need to release entire slots
either, so we just replace the single call to
virDomainPCIAddressReleaseSlot() with a call to
virDomainPCIAddressReleaseAddr() and remove the now unused function.
The keen observer may be concerned that ...Addr() doesn't call
virDomainPCIAddressValidate(), as ...Slot() did. But really the
validation was pointless anyway - if the device hadn't been suitable
to be connected at that address, it would have failed validation
before every being reserved in the first place, so by definition it
will pass validation when it is being unplugged. (And anyway, even if
something "bad" happened and we managed to have a device incorrectly
at the given address, we would still want to be able to free it up for
use by a device that *did* validate properly).
Since we don't actually reserve an entire slot at a time anymore, the
name of this function is just confusing, and it's almost identical in
operation to virDomainPCIAddressReserveNextAddr() anyway, so remove
the *Slot() function and replace calls to it with calls to *Addr(...,
-1).
