The iSCSI hostdev code doesn't require the check for the empty drive
and the check for the protocol because those are already guaranteed at
that point.
In qemuDomainSecretStorageSourcePrepare we don't need to check the
network disk type either as it's now guaranteed by the definition
validator.
Thus both callers can simply check whether src->auth is present and the
helper can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are already checking that the encryption format can be only
_LUKS and _LUKS2 this wrapper function doesn't make much sense any more.
The only one caller can do this internally.
The move of virStorageSourceIsEmpty is correct as there are no secrets
to setup if the disk is empty anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The validation should be the only point to decide whether authentication
is supported for a disk backing protocol. The rest of the code can then
simply always enable it.
This also fixes a crash when authentication is requested e.g. for a HTTP
backed disk as the blockdev props formatter expects that it was already
set up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the impossible error message about the 'qcow2' encryption format
not being supported. We validated before that it can't happen.
Additionally the code can be simplified by removing error handling from
impossible code paths as the last resort is virJSONValueCreate not
allowing NULL argument with the 's:' modifier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reject encryption requests for unsupported image format types.
Add negative test for the rejected cases as well as modify
'disk-network-rbd-encryption' case to validate that with librbd
encryption the format doesn't matter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the two ad-hoc checks below into the block which already tests
whether encryption is requested.
If we first disallow the old-style qcow2 encryption we can remove a
whole block of validation later on.
Also the capability check for qcow2+luks can be simplified by moving it
into the same block.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a quite an old (created at 2016) patch fixing an issue for at
that time contemporary Fedora 23. virsh reboot returns success (yet
after hanging for a while), VM is rebooted sucessfully too but then
shutdown from inside guest causes reboot and not shutdown.
VM has agent installed. So virsh reboot first tries to reboot VM thru
the agent. The agent calls 'shutdown -r' command. Typically it returns
instantly but on this distro for some reason it takes time. I did not
investigate the cause but the command waits in dbus client code,
probably waits for reply. The libvirt waits 60s for agent command to
execute and then errors out. Next reboot API falls back to ACPI shutdown
which returns successfully thus the reboot command return success too.
Yet shutdown command in guest eventually successfull and guest is truly
rebooted. So libvirt does not receive SHUTDOWN event and fake reboot
flag which is armed on fallback path stays armed. Thus next shutdown
from guest leads to reboot.
The issue has 100% repro on Fedora 23. On modern distros I can't
reproduce it at all. Shutdown command is asynchronous and returns
immediately even if I start some service that ignores TERM signal and
thus shutdown procedure waits for 90s (if I not mistaken) before sending
KILL.
Yet I guess it is nice to have this patch to be more robust.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nikolay.shirokovskiy@openvz.org>
When <qemu:override> is the only usage of the qemu namespace the entire
section is mistakenly removed. Add check for use count.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The point of qemu_processpriv.h file is to allow a small subset
of functions to be called from test suite but not elsewhere. This
is implemented by requiring everybody that includes the file to
define a macro. If not done so, an error is printed at compile
time. However, this error message contains a typo because it
mentions qemu_process_priv.h while the file is called
qemu_processpriv.h.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes it may come handy to learn what address is a NVDIMM
mapped to inside a guest. While users can provide an address they
want to have NVDIMM mapped to, it's optional. Fortunately, when a
domain is being started we issue the 'query-memory-devices'
monitor command and the reply is the same for 'dimm' and 'nvdimm'
types. Therefore, updating NVDIMM address is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
[1] closes gap in virDomainObjListRemove so that concurrent thread can
not step in and obtain the domain while domain is temporary unlocked. But
there is another gap exist:
thread B - executes create API
thread C - executes undefine API
- thread A executes some job on domain
- threads B and C obtains domain from list and wait for job condition
- thread A finishes its job and C grabs job condition, removes domain
from list and finishes
- thread B grabs job condition and start the domain, unfortunately
is not in the list already
[1] commit c7d1c139ca3402e875002753952e80ce8054374e
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Dec 11 11:14:08 2014 +0100
qemu: avoid rare race when undefining domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Acquiring job introduced in commit [1] to fix a race described in the
commit. Actually it does not help because we get domain in create API
before acuiring job. Then [2] fixed the race but [1] was not reverted even
it is does not required by [2] to work properly.
[1] commit b629c64e5e0a32ef439b8eeb3a697e2cd76f3248
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Oct 30 14:38:35 2014 +0100
qemu: avoid rare race when undefining domain
[2] commit c7d1c139ca3402e875002753952e80ce8054374e
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Dec 11 11:14:08 2014 +0100
qemu: avoid rare race when undefining domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
SPICE ports cleanup looks overly complicated. We can just set *reserved
flags whenever port is reserved (auto or non auto).
Also *Reserved flags are not cleared on stop in case of reconnect with
autoport (flags are set on reconnect in qemuProcessGraphicsReservePorts
call). Yeah config is freed in the end of stopping domain but still.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
VNC websocket port cleanup looks a bit repetetive. Let's set websocketReserved
flag whenever we reserve port (auto or not).
Also websocketReserved flag is not cleared on stop in case of reconnect with
auto port (flags is set on reconnect in qemuProcessGraphicsReservePorts
call). Yeah config is freed in the end of stopping domain but still.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Scenario is with two domains with same VNC websocket port.
- start first domain
- start second, it will fail as port is occupied
As a result port will be released which breaks port reservation logic.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Code to release VNC port looks repetitive. The reason is there were
originally 2 functions to release ports - for auto and non-auto cases.
Also portReserved flag is not cleared on stop in case of reconnect with
auto port (flags is set on reconnect in qemuProcessGraphicsReservePorts call).
Yeah config is freed in the end of stopping domain but still.
Let's use this flag whenever we reserve port (auto or not). This makes
things clearer.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The capability is not used anymore since "-incoming defer" is supported
by all QEMU versions we care about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All QEMU releases currently supported by libvirt already understand
"-incoming defer". We can drop the code handling "-incoming URI".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All these features are supposed to be handled by the call to
virDriverFeatureIsGlobal() placed right above the switch
statement, so if any of them is actually encountered inside
the switch statement it means there's a bug in the driver and
we should report an error.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of 'restrictive' numatune mode is to rely solely on
CGroups to have QEMU running on configured NUMA nodes. However,
we were never setting the cpuset controller when a domain was
starting up. We are doing so only when
virDomainSetNumaParameters() is called (aka live pinning).
This is obviously wrong. Fortunately, fix is simple as
'restrictive' is similar to 'strict' - every location where
VIR_DOMAIN_NUMATUNE_MEM_STRICT occurs can be audited and
VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE case can be added.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2070380
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since its introduction in v1.3.2-43-gef1fa55e46 there is a dead
code in virDomainCgroupSetupGlobalCpuCgroup() (well,
qemuSetupGlobalCpuCgroup() back then). The code formats NUMA
nodeset but never sets it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainCgroupSetupVcpuBW() is a NOP if both period and
quota to set are zero. There's no need to check in all the
callers for this special case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of reporting virReportError(..., g_strerror(), ...) let's
use proper virReportSystemError(). Generated with help of cocci:
@@
expression c;
@@
<...
- virReportError(c,
+ virReportSystemError(errno,
...,
- g_strerror(errno),
...);
...>
But then I had to hand fix format strings, because I'm not sure
if cocci even knows how to do that. And even if it did, I surely
don't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Older GCC fails to understand that 'char *main' is a variable and
not main() function. Rename the variable to appease old GCC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Note that we attempt to remove logs only if virtlogd is in use.
Otherwise we do not know the pattern for rotated files.
For example for VM named "foo" we can not use "foo.log*" pattern to
remove rotated logs as we can have VM named "foo.log" with log
"foo.log.log". We can add extra check that filename does not end with
".log" but for VM "foo.log" we can have rotated log "foo.log.log.1". Ok
let's check we don't have "log" in filename part corresponging to * but
what if someone will use logrotate with "%Y.log-%m-%d" 'dateformat'
option. In this case the check will exclude proper rotated files.
Yes, the last example if quite artificial but it shows it is difficult
to find out correctly rotated files when rotated files pattern is not
known. Thus the above decision only to support case with virtlogd when
we know the pattern.
Another reason for not removing log files when logrotate is present is
that due to races some files can escape deletion. For example foo.log.3
will be rotated to foo.log.4 after removing function will read directory
files and thus foo.log.4 will not be deleted.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also, validate that the requested feature is supported by QEMU.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce QEMU_CAPS_VIRTIO_RSS capability which tracks
virtio-net.rss attribute introduced in qemu-5.2.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function may fail and report an error, in which case we
should not just continue as if nothing happened.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until a few commits ago, libvirt produced this XML and so
we need to be able to read it back to prevent a bunch of
error : virXMLPropEnumInternal:516 : XML error: Invalid value
for attribute 'value' in element 'allowReboot': 'default'
messages from being logged on daemon upgrade when there are
running guests.
Fixes: 0fe2d8dd335054fae38b46bbbac58a4662e1a1d0
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the value is VIR_TRISTATE_BOOL_ABSENT we should just omit
the element entirely.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All supported QEMUs now accept werror/rerror as argument for the
frontend disk device, so we can remove the old code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with qemu-3.1 we always have the '-overcommit' argument and use
it instead of '-realtime'. Remove the capability check and fix all
fake-caps tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was based on a version check which no longer made sense. Remove
the flag by replacing it's only use by an arch-check which is equivalent
at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All qemu versions now support FD passing either directly or via FDset.
Assume that we always have this capability so that we can simplify
chardev handling in many cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For modern qemu versions we use the presence of 'set-numa-node' qmp
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some version checks no longer make sense as the minimum supported qemu
is now qemu-3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of April 23 2022, Ubuntu 20.04 will be out for two years, which means
we no longer have to support Ubuntu 18.04 along with qemu-2.11 shipped
with it.
This then brings the minimum qemu version we have to support to
qemu-3.1:
Debian 10/Stable: 3.1
OpenSUSE Leap 15.3: 5.2
Ubuntu 20.04: 4.2
RHEL/Centos 8.4: 4.2
Next event in this space will be 2023/07/06 when Debian 11 will be out
for two years.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu is a PCI device and attempts to use a different
address type should be rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device is configured to be an integrated endpoint, as is
necessary for it to function correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
