Aside from itinerant error (actually warning) messages due to an
unrecognized response from qemu, this isn't even necessary - the
migration proceeds successfully to completion anyway.
(I'm not sure where to see this status reported in the API though - do
we need to add an extra state, or recognition of a new event somewhere?)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Normally a PCI hostdev can't be migrated, so
qemuMigrationSrcIsAllowedHostdev() won't permit it. In the case of a a
hostdev network interface that has <teaming type='transient'/> set,
QEMU will automatically unplug the device prior to migration, and
re-plug a corresponding device on the destination. This patch modifies
qemuMigrationSrcIsAllowedHostdev() to allow domains with those devices
to be migrated.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The subelement <teaming> of <interface> devices is used to configure a
simple teaming association between two interfaces in a domain. Example:
<interface type='bridge'>
<source bridge='br0'/>
<model type='virtio'/>
<mac address='00:11:22:33:44:55'/>
<alias name='ua-backup0'/>
<teaming type='persistent'/>
</interface>
<interface type='hostdev'>
<source>
<address type='pci' bus='0x02' slot='0x10' function='0x4'/>
</source>
<mac address='00:11:22:33:44:55'/>
<teaming type='transient' persistent='ua-backup0'/>
</interface>
The interface with <teaming type='persistent'/> is assumed to always
be present, while the interface with type='transient' may be be
unplugged and later re-plugged; the persistent='blah' attribute (and
in the one currently available implementation, also the matching MAC
addresses) is what associates the two devices with each other. It is
up to the hypervisor and the guest network drivers to determine what
to do with this information.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Presence of the virtio-net-pci option called "failover" indicates
support in a qemu binary of a simplistic bonding of a virtio-net
device with another PCI device. This feature allows migration of
guests that have a network device assigned to a guest with VFIO, by
creating a network bond device in the guest consisting of the
VFIO-assigned device and a virtio-net-pci device, then temporarily
(and automatically) unplugging the VFIO net device prior to migration
(and hotplugging an equivalent device on the migration
destination). (The feature is called "failover" because the bond
device uses the vfio-pci netdev for normal guest networking, but
"fails over" to the virtio-net-pci netdev once the vfio-pci device is
unplugged for migration.)
Full functioning of the feature also requires support in the
virtio-net driver in the guest OS (since that is where the bond device
resides), but if the "failover" commandline option is present for the
virtio-net-pci device in qemu, at least the qemu part of the feature
is available, and libvirt can add the proper options to both the
virtio-net-pci and vfio-pci device commandlines to indicate qemu
should attempt doing the failover during migration.
This patch just adds the qemu capabilities flag "virtio-net.failover".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
* chown: use is conditionally compiled
* configmake: functionality imported to Makefile.am
* getaddrinfo: we have no portability problems
with Windows impl
* getpass: simplified impl is imported
* mgetgroups: getgrouplist is used directly
* net_if: header includes are conditionalized
* netdb: header includes are conditionalized
* passfd: simplified impl is imported
* posix-shell: functionality was unused & removed
* sigaction: usage is conditionalized
* sigpipe: usage is conditionalized
* stat-time: struct stat is used directly
* strchrnul: usage is eliminated
* strtok_r: usage is not a portability problem
* sys_stat: usage is conditionalized
* uname: rewritten to use native Win32 function to
get host arch
* waitpid: usage is conditionalized
* wcwidth: rewritten using g_unichar APIs
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The EAI_ADDRFAMILY constant has been removed from FreeBSD
headers, supposedly because it is deprecated by new RFC
drafts.
Previously GNULIB was providing a replacement because
MinGW lacked it too. The replacement provided for MinGW
was thus being used on FreeBSD too, but with a completely
bogus integer value.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
SIGPIPE is not available on the Windows platform.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
chown and some stat constants are not available on
the Windows platform.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_BINARY flag is not defined on all platforms so we must
conditionalize its use once we remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_DIRECT flag is not available on all platforms, so we
must introduce a compat define the same way gnulib does.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The F_DUPFD_CLOEXEC functionality is not available on
some platformms. We must thus explicitly call the
virSetCloexec function once we remove GNULIB's equiv
fix for this.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Windows uses _O_NOINHERIT as the name for its O_CLOEXEC
equivalent. Define O_CLOEXEC to match this to fix
portability when we remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The O_DIRECTORY flag causes open() to return an error
if the filename is a directory. There's no obvious
reason why resctrl needs to use this, while the rest of
libvirt code does not. Removing it avoids build issues
on platforms where O_DIRECTORY is not defined, once we
remove GNULIB.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The AC_USE_SYSTEM_EXTENSIONS macro causes things like
"USE_GNU" to be defined, which enables access to OS
specific extensions to POSIX. We currently got this
indirectly via GNULIB's 'extensions' module which is
a dependancy of other GNULIB modules we use.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The S_ISSOCK macro is not available on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently get the sys/ioctl.h check indirectly
via GNULIB, but this will soon stop happening.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The net/if.h is not portable so we must check for its
existance and avoid using it when missing. Some use
of net/if.h was redundant and could be removed.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many of the virProcess APIs are relying on GNULIB providing
POSIX API stubs. Even with these stubs the APIs don't do
anything useful once compiled. We can thus conditionalize
the code so that we don't compile anything at all.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cygwin is not a supported build platform for libvirt and
has no testing coverage in our CI systems. Stop pretending
the code is usable and remove it so there is less to port
to Meson.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A large part of the virCommand code is still built on
WIN32, despite the fact that the core fork() & execve()
functions are not available. So despite succesfully
building most of the code, at runtime the APIs are
none the less unusuable. With the elimination of GNULIB
many of the APIs being used in this code no longer have
portability wrappers/shims for Windows.
Rather than try to add portability wrappers, or do tests
for each individual function, it is clearer to conditionalize
nearly all of the code using #ifdef WIN32.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_mkdir() provides portability to Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sys/uio.h header is only needed when building logging
code with journald support enabled. Conditionally include
it so that we avoid break on platforms which lack this
header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a simplified variant of gnulib's passfd module
without the portability code that we do not require.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The gnulib stat-time.h header provides wrapper functions
to hide the differences in 'struct stat' between various
platforms.
Linux and FreeBSD support the same names, except for
birthtime which Linux only provides in the new 'statx()'
syscall we're not using. macOS has completely different
naming. Since we only rely on this code in one place
we just use conditionals at time of need.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virProcess code relies on windows.h and is getting it
indirectly via some GNULIB header fixes. This dependancy
needs to be made explicit.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mgetgroups function is a GNULIB custom wrapper around
getgrouplist(). This implements a simplified version of
that code directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The strchrnul function doesn't exist on Windows and rather
than attempt to implement it, it is simpler to just avoid
its usage, as any callers are easily adapted.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of relying on GNULIb's uname() impl, directly use the
Windows API for determining CPU architecture.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the tests appear to reference a SHELL env variable
explicitly and they all succeeed when it is not set. This
eliminates the only use of the gnulib posix-shell module.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently note that the QEMU embedded driver is experimental
in the drvqemu.html file, but we should do the same in the
virt-qemu-run man page.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Files inside /dev/vfio/ can't be opened more than once, meaning
that any subsequent open calls will fail. This behavior was
introduced in kernel v3.11, commit 6d6768c61b39.
When using the VFIO driver, we open a FD to /dev/vfio/N and
pass it to QEMU. If any other call attempt for the same
/dev/vfio/N happens while QEMU is still using the file, we are
unable to open it and QEMU will report -EBUSY. This can happen
if we hotplug a PCI hostdev that belongs to the same IOMMU group
of an existing domain hostdev.
The problem and solution is similar to what we already dealt
with for TPM in commit 4e95cdcbb3. This patch changes both
DAC and SELinux drivers to disable 'remember' for VFIO hostdevs
in virSecurityDACSetHostdevLabelHelper() and
virSecurityDACSetHostdevLabel(), and 'recall'
in virSecurityDACRestoreHostdevLabel() and
virSecuritySELinuxRestoreHostdevSubsysLabel().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is a case in which we do not want 'remember' to be
set to true in SetOwnership() calls inside the
HostdevLabelHelper() functions of both DAC and SELinux drivers.
Next patch will explain and handle that scenario.
For now, let's make virSecurityDACSetOwnership() and
virSecuritySELinuxSetHostdevLabelHelper() accept a 'remember'
flag, which will be used to set the 'remember' parameter
of their respective SetOwnership() calls. No functional
change is made.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The --strict arg forces the rst tools to abort with an error instead
of printing warnings to stderr, or the output document.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
You can't have two links with the same text when using named
link references (a single "_"). If you need multiple links
with the same text you must use anonymous link references
(a double "_").
There are also some duplicate section headers causing the
same problem with duplicate link targets.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently when disk is removed from iotune group (by setting
all tunables to zero) group name is leaved in config. Let's fix
it.
Given iotune defaults are taken from the destination group setting
tunables to zero may require different set of zero settings in API
call. Let's prohibit removing from group while specifying different
group name then current for the sanity sake.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For example if disk is not in the group and we want to move it
there then it makes sense to specify only the group name in API call.
Currently the destination group iotune settings will be overwritten
with the disk settings which I would say is not what one would expect.
Thus let's get defaults from the group we are moving to.
And if we are moving the brand new group then is makes sense to
copy the current disk iotune settings to the group.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainSetBlockIoTune not simply sets the iotune params given in API
but use current settings for all the omitted params. Unfortunately
it uses current settings for active config when setting inactive
params. Let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it is possible to start a domain which have disks
in same iotune group and at the same time having different iotune
params. Both params set are passed to qemu in command line and the one
that is passed later down command line is get actually set.
Let's prohibit such configurations.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently upon successfull call to qemu's implementation of
virDomainSetBlockIoTune iotune settings are changed only for the
disk given in API if the disk is in iotune group while we need
to change the settings for all disks in the group.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, if only iotune group name is given for some disk and
no any params then later start of domain will fail. I guess it
will be convenient to allow such configuration if there is
another disk in the same iotune group with iotune params set. The
meaning is that the first disk have same iotunes and the latter.
Thus one can easily add a disk to iotune group - just add group
name parameter and no need to copy all the params.
Also let's expand iotunes params in the described case so we don't
need to refer to another disk to know iotunes and this will make
logic in many places simple.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
And introduce virDomainBlockIoTuneInfoHasAny.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Discourage passing secrets as commandline arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
