Rather than calling virDomainHostdevAssignAddress during the parsing
of the XML, move the setting of a default hostdev address to domain/
device post processing.
Since the parse code no longer generates an address, we can remove
the virDomainDefMaybeAddHostdevSCSIcontroller since the call to
virDomainHostdevAssignAddress will attempt to add the controllers
that were not already defined in the XML.
This patch will also enforce that the address type is type 'drive'
when a SCSI subsystem <hostdev> element is provided with an <address>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If virDomainControllerSCSINextUnit failed to find a slot on the current
VIR_DOMAIN_CONTROLLER_TYPE_SCSI controller(s), try to add a new controller;
otherwise, there may be multiple unit=0 entries for the same "next"
controller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
While searching the hostdevs the drive type can be either *_TYPE_DRIVE
or *_TYPE_NONE. If the type is _TYPE_NONE on the first scsi_host, then
there is an erroneous "match" that the address already exists.
Although this works by chance currently because hostdev's are added one
at a time and 'nhostdevs' would be zero, thus returning false for the
first hostdev added, a future patch will move the hostdev address
assignment into post processing resulting in the bad match.
This code is only called by path's expecting either drive or none.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the xmlopt parameter that was saved during virDomainDefPostParse
to the parameters. A future patch will use it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify virDomainDriveAddressIsUsedBy{Disk|Hostdev} and
virDomainSCSIDriveAddressIsUsed to take 'bus' and 'target'
parameters. Will be used by future patches for more complete
address conflict checks
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the only way virDomainHostdevAssignAddress can be called is from
within virDomainHostdevDefParseXML when hostdev->source.subsys.type is
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI, thus there's no need for redundancy.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Compiler error:
../../src/nodeinfo.c: In function 'nodeGetThreadsPerSubcore':
../../src/nodeinfo.c:2393: error: label 'out' defined but not used [-Wunused-label]
../../src/nodeinfo.c:2352: error: unused parameter 'arch' [-Wunused-parameter]
The virDomainObjListRemove() function unlocks a domain that it's given
due to legacy code. And because of that code, which should be
refactored, that last virObjectUnlock() cannot be just removed. So
instead, lock it right back for qemu for now. All calls to
qemuDomainRemoveInactive() are followed by code that unlocks the domain
again, plus the domain should be locked during qemuDomainObjEndJob(), so
the right place to lock it is right after virDomainObjListRemove().
The only place where this would cause a problem is the autodestroy
callback, so we need to get another reference there and uref+unlock it
afterwards. Luckily, returning NULL from that function doesn't mean an
error, and only means that it doesn't need to be unlocked anymore.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This makes sure CPUs are counted correctly when using the default
configuration, that is, all primary threads are online and all
secondary threads are offline.
The nodeGetThreadsPerSubcore() function is mocked to return 8 for
ppc64 tests, which corresponds to the default subcore mode.
Update the expected output for the deconfigured-cpus nodeinfo
test to account for this change.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The nodeinfo is reporting incorrect number of cpus and incorrect host
topology on PPC64 KVM hosts. The KVM hypervisor on PPC64 needs only
the primary thread in a core to be online, and the secondaries offlined.
While scheduling a guest in, the kvm scheduler wakes up the secondaries to
run in guest context.
The host scheduling of the guests happen at the core level(as only primary
thread is online). The kvm scheduler exploits as many threads of the core
as needed by guest. Further, starting POWER8, the processor allows splitting
a physical core into multiple subcores with 2 or 4 threads each. Again, only
the primary thread in a subcore is online in the host. The KVM-PPC
scheduler allows guests to exploit all the offline threads in the subcore,
by bringing them online when needed.
(Kernel patches on split-core http://www.spinics.net/lists/kvm-ppc/msg09121.html)
Recently with dynamic micro-threading changes in ppc-kvm, makes sure
to utilize all the offline cpus across guests, and across guests with
different cpu topologies.
(https://www.mail-archive.com/kvm@vger.kernel.org/msg115978.html)
Since the offline cpus are brought online in the guest context, it is safe
to count them as online. Nodeinfo today discounts these offline cpus from
cpu count/topology calclulation, and the nodeinfo output is not of any help
and the host appears overcommited when it is actually not.
The patch carefully counts those offline threads whose primary threads are
online. The host topology displayed by the nodeinfo is also fixed when the
host is in valid kvm state.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Use I/O vector (iovec) instead of one huge memory buffer as suggested
in https://bugzilla.redhat.com/show_bug.cgi?id=1026137#c7. This avoids
doing memmove() to big buffers and performance doesn't degrade if
source (virNetClientStreamQueuePacket()) is faster than sink
(virNetClientStreamRecvPacket()).
Resolves: http://bugzilla.redhat.com/1026137
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If cpuset is disabled or not available, it libvirt must not use it.
Mainly for actions that do not need it and can use sched_setaffinity()
or numa_membind() instead, because they will fail without good reason.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1244664
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When stopping a domain on the destination host after a failed migration,
we need to avoid reseting security labels since the domain is still
running on the source host. While we were correctly doing so in some
cases, there were still some paths which did this wrong.
https://bugzilla.redhat.com/show_bug.cgi?id=1242904
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In addition to checking the current asynchronous job
qemuMigrationJobIsActive reports an error if the current job does not
match the one we asked for. Let's just check the job directly since we
are not interested in the error in qemuProcessHandleMonitorEOF.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If destination libvirt doesn't support memory hotplug since all the
support was introduced by adding new elements the destination would
attempt to start qemu with an invalid configuration. The worse part is
that qemu might hang in such situation.
Fix this by sending a required migration feature called 'memory-hotplug'
to the destination. If the destination doesn't recognize it it will fail
the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248350
So far qemu-nbd is run even if the nbd kernel module isn't loaded. This
leads to errors when the user starts his lxc container while libvirt
could easily load the nbd module automatically.
Our atomic increment (virAtomicIntInc) uses (if available) gcc
__sync_add_and_fetch builtin. In qemu driver though, we'd profit more
from __sync_fetch_and_add builtin. To keep it simplistic, this patch
adjusts qemu driver initialization rather than adding a new atomic
increment macro.
virDomainDeleteConfig is meant to delete the persistent config and thus
it resets vm->autostart. Copy parts of qemuProcessRemoveDomainStatus to
a new helper to avoid using the incorrect function.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1230071
The remoteDomainOpenGraphicsFD method was using the wrong RPC
arg struct remote_domain_open_graphics_args instead of
remote_domain_open_graphics_fd_args. Fortunately both structs
had identical contents so there was no functional bug, but to
avoid confusing future maintainers, we should fix it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
First hunk changes the use of srcdir to top_srcdir so it complies with
other rules in the Makefile. Second one removes the need of
remote_protocol.h in admin_protocol.h as it was suggested and worked in,
but this one line was missed apparently. Last one just removes the
'remote' naming from admin protocol specification, just so it's cleaner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit d506a51aeb meant to check for
QEMU_CAPS_DRIVE_IOTUNE_MAX, but checked for QEMU_CAPS_DRIVE_IOTUNE
instead. That's clearly visible from the diff, but it got in. Because
of that, we were supplying information unknown for QEMU if it wasn't new
enough and we couldn't even properly handle the error, leading to
"Unexpected error". Also iops_size came at the same time with all the
other "_max" options, so check whether we're not setting that either if
QEMU_CAPS_DRIVE_IOTUNE_MAX is not supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1224053
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are some non-0 default values in virDomainControllerDef (and
will soon be more) that are easier to not forget if the remembering is
done by a single initializer function (rather than inline code after
allocating the obejct with generic VIR_ALLOC().
This loop occurs just after we've assured that all devices that
require a PCI device have been assigned and all necessary PCI
controllers have been added. It is the perfect place to add other
potentially auto-generated PCI controller attributes that are
dependent on the controller's PCI address (upcoming patch).
There is a convenient loop through all controllers at the end of the
function, but the patch to add new functionality will be cleaner if we
first rearrange that loop a bit.
Note that the loop originally was accessing info.addr.pci.bus prior to
determining that the pci part of the object was valid. This isn't
dangerous in any way, but seemed a bit ugly, so I fixed it.
The function that auto-assigns PCI addresses was written with the
hardcoded assumptions that any PCI bus would have slots available
starting at 1 and ending at 31. This isn't true for many types of
controllers (some have a single slot/port at 0, some have slots/ports
from 0 to 31). This patch updates that function to remove the
hardcoded assumptions. It will properly find/assign addresses for
devices that can only connect to pcie-(root|downstream)-port (which
have minSlot/maxSlot of 0/0) or a pcie-switch-upstream-port (0/31).
It still will not auto-create a new bus of the proper kind for these
connections when one doesn't exist, that task is for another day.
Add a testcase for the previous change to ensure zero capacity volumes can be
defined without a backing store.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
In commit 155ca616e, a change was introduced that no longer allowed defining
volumes via XML with a capacity of '0'. Because we check for info.size_arg
to be non-zero, this use-case fails. This patch allows info.size_arg to be
zero if no backing store is specified.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Commit id 'ac3ed2085' causes 'virsh nodedev-list --cap net' to fail
on any system without SYSFS_INFINIBAND_DIR (/sys/class/infiniband).
Rather than assume it's there and fail on the attempt to open the
non-existent directory, check if it's there - if not, return
success and move on. Also fix caller to check < 0 upon return.
As reported by Suren Hajyan <shajyan@redhat.com> from run of unit tests
This reverts commit 7b401c3bda.
Until libvirt is able to differentiate whether heads='1' is just a
leftover from previous libvirt or whether that's added by user on
purpose and also whether the domain was started with the support for
qxl's max_outputs, we cannot incorporate this patch into the tree
due to compatibility reasons.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This makes the range and static host array management in
virNetworkDHCPDefParseXML() more similar to what is done in
virNetworkDefUpdateIPDHCPRange() and virNetworkDefUpdateIPDHCPHost() -
they use VIR_APPEND_ELEMENT rather than a combination of
VIR_REALLOC_N() and separate incrementing of the array size.
The one functional change here is that a memory leak of the contents
of the last (unsuccessful) virNetworkDHCPHostDef was previously leaked
in certain failure conditions, but it is now properly cleaned up.
Bhyve as of r279225 (FreeBSD -CURRENT) or r284894 (FreeBSD 10-STABLE)
supports using UTC time offset via the '-u' argument to bhyve(8). By
default it's still using localtime.
Make the bhyve driver use UTC clock if it's requested by specifying
<clock offset='utc'> in domain XML and if the bhyve(8) binary supports
the '-u' flag.
Commit ac3ed20 breaks build on FreeBSD with:
CC util/libvirt_util_la-virnetdev.lo
util/virnetdev.c:2967:1: error: unused function 'virNetDevRDMAFeature' [-Werror,-Wunused-function]
virNetDevRDMAFeature(const char *ifname,
^
So hide virNetDevRDMAFeature function under the #ifdef 'SIOCETHTOOL'
and 'HAVE_STRUCT_IFREQ' section.
Pushed under the build breaker rule.
We don't need pkcheck binary, but we must detect it in order
to see if we're preferring polkit-1 over polkit-0 when both
are installed. We should also check $with_dbus to see if we
have dbus-devel available, as that's required to talk to
polkit-1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1245476
We won't return the errno after commit 0d7f45ae, and
the more clearly error will be set in the code in vircgroup*.
Also We will always report error "Operation not permitted",
because the return is -1.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Move the calls to the respective functions from virNodeParseNode(),
which is executed once for every NUMA node, to
linuxNodeInfoCPUPopulate(), which is executed just once per host.
