Calling qemuDomainMigrateGraphicsRelocate notifies spice clients to
connect to destination qemu so that they can seamlessly switch streams
once migration is done. Unfortunately, current qemu is not able to
accept any connections while incoming migration connection is open.
Thus, we need to delay opening the migration connection to the point
spice client is already connected to the destination qemu.
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
This eliminates the warning message reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=624447
It was caused by a failure to open an image file that is not
accessible by root (the uid libvirtd is running as) because it's on a
root-squash NFS share, owned by a different user, with permissions of
660 (or maybe 600).
The solution is to use virFileOpenAs() rather than open(). The
codepath that generates the error is during qemuSetupDiskCGroup(), but
the actual open() is in a lower-level generic function called from
many places (virDomainDiskDefForeachPath), so some other pieces of the
code were touched just to add dummy (or possibly useful) uid and gid
arguments.
Eliminating this warning message has the nice side effect that the
requested operation may even succeed (which in this case isn't
necessary, but shouldn't hurt anything either).
virFileOpenAs previously would only try opening a file as the current
user, or as a different user, but wouldn't try both methods in a
single call. This made it cumbersome to use as a replacement for
open(2). Additionally, it had a lot of historical baggage that led to
it being difficult to understand.
This patch refactors virFileOpenAs in the following ways:
* reorganize the code so that everything dealing with both the parent
and child sides of the "fork+setuid+setgid+open" method are in a
separate function. This makes the public function easier to understand.
* Allow a single call to virFileOpenAs() to first attempt the open as
the current user, and if that fails to automatically re-try after
doing fork+setuid (if deemed appropriate, i.e. errno indicates it
would now be successful, and the file is on a networkFS). This makes
it possible (in many, but possibly not all, cases) to drop-in
virFileOpenAs() as a replacement for open(2).
(NB: currently qemuOpenFile() calls virFileOpenAs() twice, once
without forking, then again with forking. That unfortunately can't
be changed without at least some discussion of the ramifications,
because the requested file permissions are different in each case,
which is something that a single call to virFileOpenAs() can't deal
with.)
* Add a flag so that any fchown() of the file to a different uid:gid
is explicitly requested when the function is called, rather than it
being implied by the presence of the O_CREAT flag. This just makes
for less subtle surprises to consumers. (Commit
b1643dc15c added the check for O_CREAT
before forcing ownership. This patch just makes that restriction
more explicit.)
* If either the uid or gid is specified as "-1", virFileOpenAs will
interpret this to mean "the current [gu]id".
All current consumers of virFileOpenAs should retain their present
behavior (after a few minor changes to their setup code and
arguments).
Rename the src/util/netlink files to src/util/virnetlink to
better fit the naming scheme. Also rename nlComm to virNetlinkCommand.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
When libvirt's virDomainDestroy API is shutting down the qemu process,
it first sends SIGTERM, then waits for 1.6 seconds and, if it sees the
process still there, sends a SIGKILL.
There have been reports that this behavior can lead to data loss
because the guest running in qemu doesn't have time to flush its disk
cache buffers before it's unceremoniously whacked.
This patch maintains that default behavior, but provides a new flag
VIR_DOMAIN_DESTROY_GRACEFUL to alter the behavior. If this flag is set
in the call to virDomainDestroyFlags, SIGKILL will never be sent to
the qemu process; instead, if the timeout is reached and the qemu
process still exists, virDomainDestroy will return an error.
Once this patch is in, the recommended method for applications to call
virDomainDestroyFlags will be with VIR_DOMAIN_DESTROY_GRACEFUL
included. If that fails, then the application can decide if and when
to call virDomainDestroyFlags again without
VIR_DOMAIN_DESTROY_GRACEFUL (to force the issue with SIGKILL).
(Note that this does not address the issue of existing applications
that have not yet been modified to use VIR_DOMAIN_DESTROY_GRACEFUL.
That is a separate patch.)
Our HACKING discourages use of malloc and free, for at least
a couple of years now. But we weren't enforcing it, until now :)
For now, I've exempted python and tests, and will clean those up
in subsequent patches. Examples should be permanently exempt,
since anyone copying our examples won't have use of our
internal-only memory.h via libvirt_util.la.
* cfg.mk (sc_prohibit_raw_allocation): New rule.
(exclude_file_name_regexp--sc_prohibit_raw_allocation): and
exemptions.
* src/cpu/cpu.c (cpuDataFree): Avoid false positive.
* src/conf/network_conf.c (virNetworkDNSSrvDefParseXML): Fix
offenders.
* src/libxl/libxl_conf.c (libxlMakeDomBuildInfo, libxlMakeVfb)
(libxlMakeDeviceModelInfo): Likewise.
* src/rpc/virnetmessage.c (virNetMessageSaveError): Likewise.
* tools/virsh.c (_vshMalloc, _vshCalloc): Likewise.
Sometimes, its easier to run children with 2>&1 in shell notation,
and just deal with stdout and stderr interleaved. This was already
possible for fd handling; extend it to also work when doing string
capture of a child process.
* docs/internals/command.html.in: Document this.
* src/util/command.c (virCommandSetErrorBuffer): Likewise.
(virCommandRun, virExecWithHook): Implement it.
* tests/commandtest.c (test14): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Use new command
feature.
This patch fixes the access of variable "con" in two files where the
variable was declared only on SELinux builds and thus the build failed
without SELinux. It's a rather nasty fix but helps fix the build
quickly and without any major changes to the code.
Detected by valgrind. Leak is introduced in commit 397e6a7.
* src/conf/domain_conf.c(virDomainDiskDefParseXML): fix memory leak.
How to reproduce?
% make -C tests check TESTS=qemuxml2argvtest
% cd tests && valgrind -v --leak-check=full ./qemuxml2argvtest
* Actual result:
==16352== 4 bytes in 1 blocks are definitely lost in loss record 12 of 147
==16352== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16352== by 0x39D90A67DD: xmlStrndup (xmlstring.c:45)
==16352== by 0x4E83D5: virDomainDiskDefParseXML (domain_conf.c:2894)
==16352== by 0x4F542D: virDomainDefParseXML (domain_conf.c:7626)
==16352== by 0x4F8683: virDomainDefParseNode (domain_conf.c:8390)
==16352== by 0x4F904E: virDomainDefParse (domain_conf.c:8340)
==16352== by 0x41C626: testCompareXMLToArgvHelper (qemuxml2argvtest.c:105)
==16352== by 0x41DED1: virtTestRun (testutils.c:142)
==16352== by 0x418172: mymain (qemuxml2argvtest.c:486)
==16352== by 0x41D5C7: virtTestMain (testutils.c:697)
==16352== by 0x39CF01ECDC: (below main) (in /lib64/libc-2.12.so)
Signed-off-by: Alex Jia <ajia@redhat.com>
To allow the container to access /dev and /dev/pts when under
sVirt, set an explicit mount option. Also set a max size on
the /dev mount to prevent DOS on memory usage
* src/lxc/lxc_container.c: Set /dev mount context
* src/lxc/lxc_controller.c: Set /dev/pts mount context
For the sake of backwards compat, LXC guests are *not*
confined by default. This is because it is not practical
to dynamically relabel containers using large filesystem
trees. Applications can create confined containers though,
by giving suitable XML configs
* src/Makefile.am: Link libvirt_lxc to security drivers
* src/lxc/libvirtd_lxc.aug, src/lxc/lxc_conf.h,
src/lxc/lxc_conf.c, src/lxc/lxc.conf,
src/lxc/test_libvirtd_lxc.aug: Config file handling for
security driver
* src/lxc/lxc_driver.c: Wire up security driver functions
* src/lxc/lxc_controller.c: Add a '--security' flag to
specify which security driver to activate
* src/lxc/lxc_container.c, src/lxc/lxc_container.h: Set
the process label just before exec'ing init.
Curently security labels can be of type 'dynamic' or 'static'.
If no security label is given, then 'dynamic' is assumed. The
current code takes advantage of this default, and avoids even
saving <seclabel> elements with type='dynamic' to disk. This
means if you temporarily change security driver, the guests
can all still start.
With the introduction of sVirt to LXC though, there needs to be
a new default of 'none' to allow unconfined LXC containers.
This patch introduces two new security label types
- default: the host configuration decides whether to run the
guest with type 'none' or 'dynamic' at guest start
- none: the guest will run unconfined by security policy
The 'none' label type will obviously be undesirable for some
deployments, so a new qemu.conf option allows a host admin to
mandate confined guests. It is also possible to turn off default
confinement
security_default_confined = 1|0 (default == 1)
security_require_confined = 1|0 (default == 0)
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add new
seclabel types
* src/security/security_manager.c, src/security/security_manager.h:
Set default sec label types
* src/security/security_selinux.c: Handle 'none' seclabel type
* src/qemu/qemu.conf, src/qemu/qemu_conf.c, src/qemu/qemu_conf.h,
src/qemu/libvirtd_qemu.aug: New security config options
* src/qemu/qemu_driver.c: Tell security driver about default
config
This re-introduces parsing & formatting for per device seclabels.
There is a new virDomainDeviceSeclabelPtr struct and corresponding
APIs for parsing/formatting.
Revert parsing changes:
commit 302fe95ffa
Author: Eric Blake <eblake@redhat.com>
Date: Wed Jan 4 16:01:24 2012 -0700
seclabel: fix regression in libvirtd restart
commit b43432931a
Author: Eric Blake <eblake@redhat.com>
Date: Thu Dec 22 17:47:50 2011 -0700
seclabel: allow a seclabel override on a disk src
These two commits changed the sec label parsing code so that
the same code dealt with both the VM level sec label, and the
per device label. Unfortunately, as we add more options to the
VM level sec label, the logic required to use the same parsing
code for the per device label becomes unintelligible.
* src/conf/domain_conf.c: Remove support for parsing per
device sec labels
I slightly botched commit be9fb5a - I converted '--arg=value' to
'--arg value', which has no semantic change, but did trip up the
testsuite.
* src/network/bridge_driver.c (networkBuildDnsmasqArgv): Restore
expected output.
libvirt supports 4 different versions of the user-land XenD daemon. When
queried the daemon just returns its generation number, which is hard to
match to the version of the Xen tools.
Replace the magic generation numbers by named enum definitions to
improve code readability.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Detected by valgrind. Leaks introduced in commit 973af236.
* src/network/bridge_driver.c: fix memory leaks on failure and successful path.
* How to reproduce?
% make -C tests check TESTS=networkxml2argvtest
% cd tests && valgrind -v --leak-check=full ./networkxml2argvtest
* Actual result:
==2226== 3 bytes in 1 blocks are definitely lost in loss record 1 of 24
==2226== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==2226== by 0x39CF0FEDE7: __vasprintf_chk (in /lib64/libc-2.12.so)
==2226== by 0x41DFF7: virVasprintf (stdio2.h:199)
==2226== by 0x41E0B7: virAsprintf (util.c:1695)
==2226== by 0x41A2D9: networkBuildDhcpDaemonCommandLine (bridge_driver.c:545)
==2226== by 0x4145C8: testCompareXMLToArgvHelper (networkxml2argvtest.c:47)
==2226== by 0x4156A1: virtTestRun (testutils.c:141)
==2226== by 0x414332: mymain (networkxml2argvtest.c:123)
==2226== by 0x414D97: virtTestMain (testutils.c:696)
==2226== by 0x39CF01ECDC: (below main) (in /lib64/libc-2.12.so)
==2226==
==2226== 3 bytes in 1 blocks are definitely lost in loss record 2 of 24
==2226== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==2226== by 0x39CF0FEDE7: __vasprintf_chk (in /lib64/libc-2.12.so)
==2226== by 0x41DFF7: virVasprintf (stdio2.h:199)
==2226== by 0x41E0B7: virAsprintf (util.c:1695)
==2226== by 0x41A307: networkBuildDhcpDaemonCommandLine (bridge_driver.c:551)
==2226== by 0x4145C8: testCompareXMLToArgvHelper (networkxml2argvtest.c:47)
==2226== by 0x4156A1: virtTestRun (testutils.c:141)
==2226== by 0x414332: mymain (networkxml2argvtest.c:123)
==2226== by 0x414D97: virtTestMain (testutils.c:696)
==2226== by 0x39CF01ECDC: (below main) (in /lib64/libc-2.12.so)
==2226==
==2226== 5 bytes in 1 blocks are definitely lost in loss record 4 of 24
==2226== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==2226== by 0x39CF0FEDE7: __vasprintf_chk (in /lib64/libc-2.12.so)
==2226== by 0x41DFF7: virVasprintf (stdio2.h:199)
==2226== by 0x41E0B7: virAsprintf (util.c:1695)
==2226== by 0x41A2AB: networkBuildDhcpDaemonCommandLine (bridge_driver.c:539)
==2226== by 0x4145C8: testCompareXMLToArgvHelper (networkxml2argvtest.c:47)
==2226== by 0x4156A1: virtTestRun (testutils.c:141)
==2226== by 0x414332: mymain (networkxml2argvtest.c:123)
==2226== by 0x414D97: virtTestMain (testutils.c:696)
==2226== by 0x39CF01ECDC: (below main) (in /lib64/libc-2.12.so)
==2226==
==2226== LEAK SUMMARY:
==2226== definitely lost: 11 bytes in 3 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a trivial implementation, which works with the current
released qemu 1.0 with backports of preliminary block pull but
no partial rebase. Future patches will update the monitor handling
to support an optional parameter for partial rebase; but as qemu
1.1 is unreleased, it can be in later patches, designed to be
backported on top of the supported API.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Add parameter,
and adjust callers. Drop redundant check.
(qemuDomainBlockPull): Move guts...
(qemuDomainBlockRebase): ...to new function.
Qemu is adding the ability to do a partial rebase. That is, given:
base <- intermediate <- current
virDomainBlockPull will produce:
current
but qemu now has the ability to leave base in the chain, to produce:
base <- current
Note that current qemu can only do a forward merge, and only with
the current image as the destination, which is fully described by
this API without flags. But in the future, it may be possible to
enhance this API for additional scenarios by using flags:
Merging the current image back into a previous image (that is,
undoing a live snapshot), could be done by passing base as the
destination and flags with a bit requesting a backward merge.
Merging any other part of the image chain, whether forwards (the
backing image contents are pulled into the newer file) or backwards
(the deltas recorded in the newer file are merged back into the
backing file), could also be done by passing a new flag that says
that base should be treated as an XML snippet rather than an
absolute path name, where the XML could then supply the additional
instructions of which part of the image chain is being merged into
any other part.
* include/libvirt/libvirt.h.in (virDomainBlockRebase): New
declaration.
* src/libvirt.c (virDomainBlockRebase): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.10): Export it.
* src/driver.h (virDrvDomainBlockRebase): New driver callback.
* src/rpc/gendispatch.pl (long_legacy): Add exemption.
* docs/apibuild.py (long_legacy_functions): Likewise.
This patch adds support for the new api into the qemu driver to support
modification and retrieval of domain description and title. This patch
does not add support for modifying the <metadata> element.
This patch adds API to modify domain metadata for running and stopped
domains. The api supports changing description, title as well as the
newly added <metadata> element. The API has support for storing data in
the metadata element using xml namespaces.
* include/libvirt/libvirt.h.in
* src/libvirt_public.syms
- add function headers
- add enum to select metadata to operate on
- export functions
* src/libvirt.c
- add public api implementation
* src/driver.h
- add driver support
* src/remote/remote_driver.c
* src/remote/remote_protocol.x
- wire up the remote protocol
* include/libvirt/virterror.h
* src/util/virterror.c
- add a new error message note that metadata for domain are
missing
This patch adds a new element <title> to the domain XML. This attribute
can hold a short title defined by the user to ease the identification of
domains. The title may not contain newlines and should be reasonably short.
*docs/formatdomain.html.in
*docs/schemas/domaincommon.rng
- add schema grammar for the new element and documentation
*src/conf/domain_conf.c
*src/conf/domain_conf.h
- add field to hold the new attribute
- add code to parse and create XML with the new attribute
This was forgotten when the function was originally written (not
noticed because it wasn't used at the time). It's required for
proper compilation with modules enabled after applying the recent
virStorageVolResize patches.
This was forgotten when the function was initially written (not
noticed because it wasn't used at the time). It's required for proper
compilation with modules enabled after applying the recent rawio
patches.
We already provide ways to detect when a domain has been paused as a
result of I/O error, but there was no way of getting the exact error or
even the device that experienced it. This new API may be used for both.
If we are building not on a WIN32 architecture and without HAVE_CAPNG
virSetCapabilities has unused argument and virClearCapabilities
is unused as well.
In qemuDomainShutdownFlags if we try to use guest agent,
which has error or is not configured, we jump go endjob
label even if we haven't started any job yet. This may
lead to the daemon crash:
1) virsh shutdown --mode agent on a domain without agent configured
2) wait until domain quits
3) virsh edit
Fix my typo at
commit 74e034964c
"disk->rawio == -1" indicates that this value is not
specified. So in case of this, domain must not
be tainted.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Using new function 'virTypedParameterArrayClear' to simplify block of codes.
* daemon/remote.c, src/remote/remote_driver.c: simplify codes.
Signed-off-by: Alex Jia <ajia@redhat.com>
This patch revises qemuProcessStart() function for qemu
processes to retain CAP_SYS_RAWIO if needed.
And in case of that, add taint flag to domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Shota Hirae <m11g1401@hibikino.ne.jp>
This patch introduces virSetCapabilities() function and implements
virCommandAllowCap() function.
Existing virClearCapabilities() is function to clear all capabilities.
Instead virSetCapabilities() is function to set arbitrary capabilities.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Shota Hirae <m11g1401@hibikino.ne.jp>
This patch adds a new attribute "rawio" to the "disk" element
of domain XML. Valid values of "rawio" attribute are "yes"
and "no".
rawio='yes' indicates the disk is desirous of CAP_SYS_RAWIO.
If you specify the following XML:
<disk type='block' device='lun' rawio='yes'>
...
</disk>
the domain will be granted CAP_SYS_RAWIO.
(of course, the domain have to be executed with root privilege)
NOTE:
- "rawio" attribute is only valid when device='lun'
- At the moment, any other disks you won't use rawio can use rawio.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Our existing virDomainBlockResize takes an unsigned long long
argument; if that command is later taught a DELTA and SHRINK flag,
we cannot change its type without breaking API (but at least such
a change would be ABI compatible). Meanwhile, the only time a
negative size makes sense is if both DELTA and SHRINK are used
together, but if we keep the argument unsigned, applications can
pass the positive delta amount by which they would like to shrink
the system, and have the flags imply the negative value. So,
since this API has not yet been released, and in the interest of
consistency with existing API, we swap virStorageVolResize to
always pass an unsigned value.
* include/libvirt/libvirt.h.in (virStorageVolResize): Use unsigned
argument.
* src/libvirt.c (virStorageVolResize): Likewise.
* src/driver.h (virDrvStorageVolUpload): Adjust clients.
* src/remote/remote_protocol.x (remote_storage_vol_resize_args):
Likewise.
* src/remote_protocol-structs: Regenerate.
Suggested by Daniel P. Berrange.
Fix several references to now renamed functions and parameters when the
functions were moved from src/xen/ to src/xenxs/.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch addresses: https://bugzilla.redhat.com/show_bug.cgi?id=781562
Along with the "rombar" option that controls whether or not a boot rom
is made visible to the guest, qemu also has a "romfile" option that
allows specifying a binary file to present as the ROM BIOS of any
emulated or passthrough PCI device. This patch adds support for
specifying romfile to both passthrough PCI devices, and emulated
network devices that attach to the guest's PCI bus (just about
everything other than ne2k_isa).
One example of the usefulness of this option is described in the
bugzilla report: 82576 sriov network adapters don't provide a ROM BIOS
for the cards virtual functions (VF), but an image of such a ROM is
available, and with this ROM visible to the guest, it can PXE boot.
In libvirt's xml, the new option is configured like this:
<hostdev>
...
<rom file='/etc/fake/boot.bin'/>
...
</hostdev
(similarly for <interface>).
When support for the rombar option was added, it was only added for
PCI passthrough devices, configured with <hostdev>. The same option is
available for any network device that is attached to the guest's PCI
bus. This patch allows setting rombar for any PCI network device type.
After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*,
I decided to rename those files (to qemuxml2argv-pci-rom.*) to more
accurately reflect the additional tests, and also noticed that up to
now we've only been performing a domainschematest for that case, so I
added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in
the process found some bugs whose fixes I squashed into previous
commits of this series).
Since these two items are now in the virDomainDeviceInfo struct, it
makes sense to parse/format them in the functions written to
parse/format that structure. Not all types of devices allow them, so
two internal flags are added to indicate when it is appropriate to do
so.
I was lucky - only one test case needed to be re-ordered!
To help consolidate the commonality between virDomainHostdevDef and
virDomainNetDef into as few members as possible (and because I
think it makes sense), this patch moves the rombar and bootIndex
members into the "info" member that is common to both (and to all the
other structs that use them).
It's a bit problematic that this gives rombar and bootIndex to many
device types that don't use them, but this is already the case for the
master and mastertype members of virDomainDeviceInfo, and is properly
commented as such in the definition.
Note that this opens the door to supporting rombar for other devices
that are attached to the guest PCI bus - virtio-blk-pci,
virtio-net-pci, various other network adapters - which which have that
capability in qemu, but previously had no support in libvirt.
Unlike other users of virTypedParameter with RPC, this interface
can return zero-filled entries because the interface assumes
2 dimensional array. We compress these entries out from the
server when generating the over-the-wire contents, then reconstitute
them in the client.
Signed-off-by: Eric Blake <eblake@redhat.com>
add new API virDomainGetCPUStats() for getting cpu accounting information
per real cpus which is used by a domain. The API is designed to allow
future extensions for additional statistics.
based on ideas by Lai Jiangshan and Eric Blake.
* src/libvirt_public.syms: add API for LIBVIRT_0.9.10
* src/libvirt.c: define virDomainGetCPUStats()
* include/libvirt/libvirt.h.in: add virDomainGetCPUStats() header
* src/driver.h: add driver API
* python/generator.py: add python API (as not implemented)
Signed-off-by: Eric Blake <eblake@redhat.com>
This API allows a domain to be put into one of S# ACPI states.
Currently, S3 and S4 are supported. These states are shared
with virNodeSuspendForDuration.
However, for now we don't support any duration other than zero.
The same apply for flags.
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.
Expose the new command via 'virsh vol-resize'.
Signed-off-by: Eric Blake <eblake@redhat.com>
And hook it up for policykit auth. This allows virt-manager to detect
that the user clicked the policykit 'cancel' button and not throw
an 'authentication failed' error message at the user.
If yajl was not compiled in, we end up freeing an incoming
parameter, which leads to a bogus free later on. Regression
introduced in commit 6e769eb.
* src/qemu/qemu_capabilities.c (qemuCapsParseHelpStr): Avoid alloc
on failure path, which in turn fixes bogus free.
Reported by Cole Robinson.
The virEmitXMLWarning function should always have been in
the xml.[hc] files, and should use virXML as its name
prefix
* src/util/util.c, src/util/util.h: Remove virEmitXMLWarning
* src/util/xml.c, src/util/xml.h: Add virXMLEmitWarning
QEMU supports a bunch of CPUID features that are tied to the kvm CPUID
nodes rather than the processor's. They are "kvmclock",
"kvm_nopiodelay", "kvm_mmu", "kvm_asyncpf". These are not known to
libvirt and their CPUID leaf might move if (for example) the Hyper-V
extensions are enabled. Hence their handling would anyway require some
special-casing.
However, among these the most useful is kvmclock; an additional
"property" of this feature is that a <timer> element is a better model
than a CPUID feature. Although, creating part of the -cpu command-line
from something other than the <cpu> XML element introduces some
ugliness.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvmclock timer to documentation, schema and parsers. Keep the
platform timer first since it is kind of special, and alphabetize
the others when possible (i.e. when it does not change the ABI).
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid creating an empty <cpu> element when the QEMU command-line simply
specifies the default "-cpu qemu32" or "-cpu qemu64".
This requires the previous patch, which lets us represent "-cpu qemu32"
as <os arch='i686'> in the generated XML.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu32 CPU model is chosen based on the <os arch=...> name when
creating the QEMU command line for a 64-bit host. For the opposite
transformation we can test the guest CPU model for the "lm" feature.
If it is absent, def->os.arch needs to be corrected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running under KVM, the arch is usually set to i686 because
the name of the emulator is not qemu-system-x86_64. Use the host
arch instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recently (or not so recently) QEMU added the kvm32 and kvm64
architectures, representing a least common denominator of all
hosts that can run KVM. Add them to the machine map.
Also, some features that TCG supports were added to qemu64.
Add them to the cpu_map.xml whenever KVM is guaranteed to support
those. We still have to leave some out, because they would not
be available to guests running on older hosts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu developers have made it clear that modern qemu will no
longer guarantee human monitor command stability; furthermore,
some features, such as async events, are only supported via qmp.
If we are compiled without support for handling JSON, we cannot
expect to sanely interact with modern qemu.
However, things must continue to build on RHEL 5, where qemu
is stuck at 0.10, and where yajl is not available.
Another benefit of this patch: future additions of new monitor
commands need only focus on qemu_monitor_json.c, instead of
also wasting time with qemu_monitor_text.c.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Report
error if yajl is missing but qemu requires qmp.
(qemuCapsParseHelpStr): Propagate error.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Likewise.
I'm getting tired of remembering to backport RHEL-specific
patches when building upstream libvirt on RHEL 6.x or CentOS.
All the affected versions of RHEL qemu-kvm have backported
enough patches to a) make JSON useful, and b) modify the
-help text to mention libvirt as the preferred interface;
which means this string in the help output is a reliable
indicator that we can outsmart a strict version check,
even when upstream qemu 0.12 lacked the needed features.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags):
Recognize particular help string present when enough features were
backported to be worth using JSON.
* tests/qemuhelptest.c (mymain): Update tests accordingly.
Compare two filters' XML for equality and only rebuild/instantiate the new
filter if the new and current filters are found to be different. This
improves performance during an update of a filter with no obvious change
or the reloading of filters during a 'kill -SIGHUP'
Introduce a function that rebuilds all running VMs' filters. Call
this function when reloading the nwfilter driver.
This addresses a problem introduced by the 2nd patch that typically
causes no filters to be reinstantiate anymore upon driver reload
since their XML has not changed. Yet the current behavior is that
upon a SIGHUP all filters get reinstantiated.
QEMU always sends details about all available block devices as an answer
for "info block"/"query-block" command. On the other hand, our
qemuMonitorGetBlockInfo was made for a single block devices queries
only. Thus, when asking for multiple devices, we asked qemu multiple
times to always get the same answer from which different parts were
filtered. This patch makes qemuMonitorGetBlockInfo return a hash table
of all block devices, which may later be used for getting details about
specific devices.
Added a new field "vm-pid" to the VIRT_CONTROL audit record. This information
is useful to correlated another audit events to the events generated by
libvirt.
On RHEL5, I got:
util/virrandom.c:66: warning: nested extern declaration of '_gl_verify_function66' [-Wnested-externs]
The fix is to hoist the verify earlier. Also some other hodge-podge
fixes I noticed while reviewing Dan's recent series.
* .gitignore: Ignore new test.
* src/util/cgroup.c: Bump copyright year.
* src/util/virhash.c: Fix typo in description.
* src/util/virrandom.c (virRandomBits): Mark doc comment, and
hoist assert to silence older gcc.
Recent discussions have illustrated the potential for DOS attacks
with the hash table implementations used by most languages and
libraries.
https://lwn.net/Articles/474912/
libvirt has an internal hash table impl, and uses hash tables for
a variety of purposes. The hash key generation code is pretty
simple and thus not strongly collision resistant.
This patch replaces the current libvirt hash key generator with
the (public domain) Murmurhash3 code. In addition every hash
table now gets a random seed value which is used to perturb the
hashing code. This should make it impossible to mount any
practical attack against libvirt hashing code.
* bootstrap.conf: Import bitrotate module
* src/Makefile.am: Add virhashcode.[ch]
* src/util/util.c: Make virRandom() return a fixed 32 bit
integer value.
* src/util/hash.c, src/util/hash.h, src/util/cgroup.c: Replace
hash code generation with a call to virHashCodeGen()
* src/util/virhashcode.h, src/util/virhashcode.c: Add a new
virHashCodeGen() API using the Murmurhash3 algorithm.
In preparation for the patch to include Murmurhash3, which
introduces a virhashcode.h and virhashcode.c files, rename
the existing hash.h and hash.c to virhash.h and virhash.c
respectively.
In preparation for conversion over to use the Murmurhash3
algorithm, convert various virHash APIs to use size_t or
uint32 for their return values/parameters, instead of the
variable size 'unsigned long' or 'int' types
The old virRandom() API was not generating good random numbers.
Replace it with a new API virRandomBits which instead of being
told the upper limit, gets told the number of bits of randomness
required.
* src/util/virrandom.c, src/util/virrandom.h: Add virRandomBits,
and move virRandomInitialize
* src/util/util.h, src/util/util.c: Delete virRandom and
virRandomInitialize
* src/libvirt.c, src/security/security_selinux.c,
src/test/test_driver.c, src/util/iohelper.c: Update for
changes from virRandom to virRandomBits
* src/storage/storage_backend_iscsi.c: Remove bogus call
to virRandomInitialize & convert to virRandomBits
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
In file included from ../gnulib/lib/unistd.h:51:0,
from ../src/util/util.h:30,
from rpc/virkeepalive.c:29:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/winsock2.h:15:2: warning: #warning Please include winsock2.h before windows.h [-Wcpp]
Reported by Marc-André Lureau.
* src/util/threads-win32.h (includes): Pick up winsock2.h before
windows.h, as required by mingw64.
On F16 at least, empty volume groups don't have a directory under /dev.
The directory only appears once a logical volume is created.
This tickles some behavior in BackendStablePath which ends with
libvirt sleeping for 5 seconds while waiting for the directory to appear.
This causes all sorts of problems for the virStorageVolLookupByPath API
which virtinst uses, even if trying to resolve a path that is independent
of the logical pool.
In reality we don't even need to do that checking since logical pools
always have a stable target path. Short circuit the polling in that
case.
Fixes bug 782261
Systemd detects containers based on whether they have
an environment variable starting with 'container=lxc';
using a longer name fits the expectations, while also
allowing detection of who created the container.
Requested by Lennart Poettering, in response to
https://bugs.freedesktop.org/show_bug.cgi?id=45175
* src/lxc/lxc_container.c (lxcContainerBuildInitCmd): Add another
env-var.
The current setup code for LXC is bind mounting /dev/pts/ptmx
on top of a character device /dev/ptmx. This is denied by SELinux
policy and is just wrong. The target of a bind mount should just
be a plain file
* src/lxc/lxc_container.c: Don't bind /dev/pts/ptmx onto
a char device
Add a virFileTouch API which ensures that a file will always
exist, even if zero length
* src/util/virfile.c, src/util/virfile.h,
src/libvirt_private.syms: Introduce virFileTouch
Direct boot (using kernel, initrd, and command line) is used by
virt-install/virt-manager for network install. While any bootindex has
no direct effect since -kernel is always first, we need it as a hint for
SeaBIOS to present disks in the same order as they will be presented
during normal boot.
It's better to group all the metadata together. This is a
cosmetic output change; since the RNG allows interleave, it
doesn't matter where the user stuck it on input, and an XPath
query will find the same information when parsing the output.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Output
metadata earlier.
* docs/formatdomain.html.in: Update documentation.
* tests/domainsnapshotxml2xmlout/metadata.xml: Update test.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-metadata.xml: Likewise.
Applications can now insert custom nodes and hierarchies into domain
configuration XML. Although currently not enforced, applications are
required to use their own namespaces on every custom node they insert,
with only one top-level element per namespace.
POLLIN and POLLHUP are not mutually exclusive. Currently the following
seems possible: the child writes 3K to its stdout or stderr pipe, and
immediately closes it. We get POLLIN|POLLHUP (I'm not sure that's possible
on Linux, but SUSv4 seems to allow it). We read 1K and throw away the
rest.
When poll() returns and we're about to check the /revents/ member in a
given array element, let's map all the revents bits to two (independent)
ideas: "let's attempt to read()", and "let's attempt to write()". This
should cover all errors, EOFs, and normal conditions; the read()/write()
call should report any pending error.
Under this approach, both POLLHUP and POLLERR are mapped to "needs read()"
if we're otherwise prepared for POLLIN. POLLERR also maps to "needs
write()" if we're otherwise prepared for POLLOUT. The rest of the mappings
(POLLPRI etc.) would be easy, but probably useless for pipes.
Additionally, SUSv4 doesn't appear to forbid POLLIN|POLLERR (or
POLLOUT|POLLERR) set simultaneously. One could argue that the read() or
write() call would return without blocking in these cases (with an error),
so POLLIN / POLLOUT would be justified beside POLLERR.
The code now penalizes POLLIN|POLLERR differently from plain POLLERR. The
former (ie. read() returning -1) is terminal and we jump to cleanup, while
plain POLLERR masks only the affected file descriptor for the future.
Let's unify those.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This makes use of the QEMU guest agent to implement the
virDomainShutdownFlags and virDomainReboot APIs. With
no flags specified, it will prefer to use the agent, but
fallback to ACPI. Explicit choice can be made by using
a suitable flag
* src/qemu/qemu_driver.c: Wire up use of agent
Add a new API virDomainShutdownFlags and define:
VIR_DOMAIN_SHUTDOWN_DEFAULT = 0,
VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_SHUTDOWN_GUEST_AGENT = (1 << 1),
Also define some flags for the reboot API
VIR_DOMAIN_REBOOT_DEFAULT = 0,
VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_REBOOT_GUEST_AGENT = (1 << 1),
Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.
Add stub impls of the new API for all existing drivers
There is now a standard QEMU guest agent that can be installed
and given a virtio serial channel
<channel type='unix'>
<source mode='bind' path='/var/lib/libvirt/qemu/f16x86_64.agent'/>
<target type='virtio' name='org.qemu.guest_agent.0'/>
</channel>
The protocol that runs over the guest agent is JSON based and
very similar to the JSON monitor. We can't use exactly the same
code because there are some odd differences in the way messages
and errors are structured. The qemu_agent.c file is based on
a combination and simplification of qemu_monitor.c and
qemu_monitor_json.c
* src/qemu/qemu_agent.c, src/qemu/qemu_agent.h: Support for
talking to the agent for shutdown
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add thread
helpers for talking to the agent
* src/qemu/qemu_process.c: Connect to agent whenever starting
a guest
* src/qemu/qemu_monitor_json.c: Make variable static
When converting a linear enum to a string, we have checks in
place in the VIR_ENUM_IMPL macro to ensure that there is one
string for every value, which lets us quickly flag if a user
added a value but forgot to add a counterpart string. However,
this only works if we use the _LAST marker.
* cfg.mk (sc_require_enum_last_marker): New syntax check.
* src/conf/domain_conf.h (virDomainSnapshotState): Add new marker.
* src/conf/domain_conf.c (virDomainSnapshotState): Fix offender.
* src/qemu/qemu_monitor_json.c (qemuMonitorWatchdogAction)
(qemuMonitorIOErrorAction, qemuMonitorGraphicsAddressFamily):
Likewise.
* src/util/virtypedparam.c (virTypedParameter): Likewise.
Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h. It is not an ABI break, since enum values do not
appear as .so entry points. Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.
See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html
* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.
While we still don't want to enable gcc's new -Wformat-literal
warning, I found a rather easy case where the warning could be
reduced, by getting rid of obsolete error-reporting practices.
This is the last place where we were passing the (unused) net
and conn arguments for constructing an error.
* src/util/virterror_internal.h (virErrorMsg): Delete prototype.
(virReportError): Delete macro.
* src/util/virterror.c (virErrorMsg): Make static.
* src/libvirt_private.syms (virterror_internal.h): Drop export.
* src/util/conf.c (virConfError): Convert to macro.
(virConfErrorHelper): New function, and adjust error calls.
* src/xen/xen_hypervisor.c (virXenErrorFunc): Delete.
(xenHypervisorGetSchedulerType)
(xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters)
(xenHypervisorDomainBlockStats)
(xenHypervisorDomainInterfaceStats)
(xenHypervisorDomainGetOSType)
(xenHypervisorNodeGetCellsFreeMemory, xenHypervisorGetVcpus):
Update callers.
Reusing common code makes things smaller; it also buys us some
additional safety, such as now rejecting duplicate parameters
during a set operation.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters)
(qemuDomainSetMemoryParameters, qemuDomainSetNumaParameters)
(qemuSetSchedulerParametersFlags)
(qemuDomainSetInterfaceParameters, qemuDomainSetBlockIoTune)
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuDomainGetNumaParameters, qemuGetSchedulerParametersFlags)
(qemuDomainBlockStatsFlags, qemuDomainGetInterfaceParameters)
(qemuDomainGetBlockIoTune): Use new helpers.
* src/esx/esx_driver.c (esxDomainSetSchedulerParametersFlags)
(esxDomainSetMemoryParameters)
(esxDomainGetSchedulerParametersFlags)
(esxDomainGetMemoryParameters): Likewise.
* src/libxl/libxl_driver.c
(libxlDomainSetSchedulerParametersFlags)
(libxlDomainGetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcDomainSetMemoryParameters)
(lxcSetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetMemoryParameters, lxcGetSchedulerParametersFlags)
(lxcDomainGetBlkioParameters): Likewise.
* src/test/test_driver.c (testDomainSetSchedulerParamsFlags)
(testDomainGetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorSetSchedulerParameters)
(xenHypervisorGetSchedulerParameters): Likewise.
Preparation for another patch that refactors common patterns
into the new file for fewer lines of code overall.
* src/util/util.h (virTypedParameterArrayClear): Move...
* src/util/virtypedparam.h: ...to new file.
(virTypedParameterArrayValidate, virTypedParameterAssign): New
prototypes.
* src/util/util.c (virTypedParameterArrayClear): Likewise.
* src/util/virtypedparam.c: New file.
* po/POTFILES.in: Mark file for translation.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms (util.h): Split...
(virtypedparam.h): to new section.
(virkeycode.h): Sort.
* daemon/remote.c: Adjust callers.
* tools/virsh.c: Likewise.
Based on qemu changes made in commits ae523427 and 659ded58.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Use helpers.
(lxcDomainSetBlkioParameters): Allow setting live and config at
once.
We had a memory leak on a very arcane OOM situation (unlikely to ever
hit in practice, but who knows if libvirt.so would ever be linked
into some other program that exhausts all thread-local storage keys?).
I found it by code inspection, while analyzing a valgrind report
generated by Alex Jia.
* src/util/threads.h (virThreadLocalSet): Alter signature.
* src/util/threads-pthread.c (virThreadHelper): Reduce allocation
lifetime.
(virThreadLocalSet): Detect failure.
* src/util/threads-win32.c (virThreadLocalSet): Likewise.
(virCondWait): Fix caller.
* src/util/virterror.c (virLastErrorObject): Likewise.
The RPC generator transforms methods matching certain
patterns like 'id' or 'uuid', etc but does not anchor
its matches to the end of the word. So if a method
contains 'id' in the middle (eg virIdentity) then the
RPC generator munges that.
* src/rpc/gendispatch.pl: Anchor matches
To avoid a namespace clash with forthcoming identity APIs,
rename the virNet*GetLocalIdentity() APIs to have the form
virNet*GetUNIXIdentity()
* daemon/remote.c, src/libvirt_private.syms: Update
for renamed APIs
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h,
src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: s/LocalIdentity/UNIXIdentity/
There was missing capability for blkiotune and thus specifying these
settings caused libvirt to run qemu with invalid parameters and then
reporting qemu error instead of the standard libvirt one. The support
for blkiotune setting was added in upstream qemu repo under commit
0563e191516289c9d2f282a8c50f2eecef2fa773.
Given an LXC guest with a root filesystem path of
/export/lxc/roots/helloworld/root
During startup, we will pivot the root filesystem to end up
at
/.oldroot/export/lxc/roots/helloworld/root
We then try to open
/.oldroot/export/lxc/roots/helloworld/root/dev/pts
Now consider if '/export/lxc' is an absolute symlink pointing
to '/media/lxc'. The kernel will try to open
/media/lxc/roots/helloworld/root/dev/pts
whereas it should be trying to open
/.oldroot//media/lxc/roots/helloworld/root/dev/pts
To deal with the fact that the root filesystem can be moved,
we need to resolve symlinks in *any* part of the filesystem
source path.
* src/libvirt_private.syms, src/util/util.c,
src/util/util.h: Add virFileResolveAllLinks to resolve
all symlinks in a path
* src/lxc/lxc_container.c: Resolve all symlinks in filesystem
paths during startup
pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
return -1;
..skipped...
if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
goto reattachdevs;
NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667
This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:
* Add the device to inactive list during nodedev-dettach
* Remove the device from inactive list during nodedev-reattach
* Remove the device from inactive list during attach-device
(for non-managed device)
* Add the device to inactive list after detach-device, only
if the device is not managed
With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)
if (pciResetDevice(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0)
goto reattachdevs;
This introduces new attribute wrpolicy with only supported
value as immediate. This will be an optional
attribute with no defaults. This helps specify whether
to skip the host page cache.
When wrpolicy is specified, meaning when wrpolicy=immediate
a writeback is explicitly initiated for the dirty pages in
the host page cache as part of the guest file write operation.
Usage:
<filesystem type='mount' accessmode='passthrough'>
<driver type='path' wrpolicy='immediate'/>
<source dir='/export/to/guest'/>
<target dir='mount_tag'/>
</filesystem>
Currently this only works with type='mount' for the QEMU/KVM driver.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
In the past we didn't reserve 0:0:2.0 PCI address if there was no video
device assigned to a domain, which made it impossible to add a video
device later on. So we fixed it (commit v0.9.0-37-g7b2cac1) by always
reserving that address. However, that breaks existing domains without
video devices that already have another device assigned to the
problematic address.
This patch reserves address 0:0:2.0 only in case it was not explicitly
assigned to another device, which means libvirt will try to keep this
address free and will not automatically assign it new devices. But
existing domains for which older libvirt already assigned the address to
a non-video device will keep working as they used to work before 0.9.1.
Moreover, users who want to create a domain without a video device and
use its address for another device may do so by explicitly configuring
the PCI address in domain XML.
There are several reasons for doing this:
- the CPU specification is out of libvirt's control so we cannot
guarantee stable guest ABI
- not every feature of a CPU may actually work as expected when
advertised directly to a guest
- migration between two machines with exactly the same CPU may work but
no guarantees can be made
- this mode is not supported and its use is at one's own risk
VIR_DOMAIN_XML_UPDATE_CPU flag for virDomainGetXMLDesc may be used to
get updated custom mode guest CPU definition in case it depends on host
CPU. This patch implements the same behavior for host-model and
host-passthrough CPU modes.
The mode can be either of "custom" (default), "host-model",
"host-passthrough". The semantics of each mode is described in the
following examples:
- guest CPU is a default model with specified topology:
<cpu>
<topology sockets='1' cores='2' threads='1'/>
</cpu>
- guest CPU matches selected model:
<cpu mode='custom' match='exact'>
<model>core2duo</model>
</cpu>
- guest CPU should be a copy of host CPU as advertised by capabilities
XML (this is a short cut for manually copying host CPU specification
from capabilities to domain XML):
<cpu mode='host-model'/>
In case a hypervisor does not support the exact host model, libvirt
automatically falls back to a closest supported CPU model and
removes/adds features to match host. This behavior can be disabled by
<cpu mode='host-model'>
<model fallback='forbid'/>
</cpu>
- the same as previous returned by virDomainGetXMLDesc with
VIR_DOMAIN_XML_UPDATE_CPU flag:
<cpu mode='host-model' match='exact'>
<model fallback='allow'>Penryn</model> --+
<vendor>Intel</vendor> |
<topology sockets='2' cores='4' threads='1'/> + copied from
<feature policy='require' name='dca'/> | capabilities XML
<feature policy='require' name='xtpr'/> |
... --+
</cpu>
- guest CPU should be exactly the same as host CPU even in the aspects
libvirt doesn't model (such domain cannot be migrated unless both
hosts contain exactly the same CPUs):
<cpu mode='host-passthrough'/>
- the same as previous returned by virDomainGetXMLDesc with
VIR_DOMAIN_XML_UPDATE_CPU flag:
<cpu mode='host-passthrough' match='minimal'>
<model>Penryn</model> --+ copied from caps
<vendor>Intel</vendor> | XML but doesn't
<topology sockets='2' cores='4' threads='1'/> | describe all
<feature policy='require' name='dca'/> | aspects of the
<feature policy='require' name='xtpr'/> | actual guest CPU
... --+
</cpu>
In case a hypervisor doesn't support the exact CPU model requested by a
domain XML, we automatically fallback to a closest CPU model the
hypervisor supports (and make sure we add/remove any additional features
if needed). This patch adds 'fallback' attribute to model element, which
can be used to disable this automatic fallback.
Commit 5d784bd6d7 was a nice attempt to
clarify the semantics by requiring domain name from dxml to either match
original name or dname. However, setting dxml domain name to dname
doesn't really work since destination host needs to know the original
domain name to be able to use it in migration cookies. This patch
requires domain name in dxml to match the original domain name. The
change should be safe and backward compatible since migration would fail
just a bit later in the process.
There are three address validation routines that do nothing:
virDomainDeviceDriveAddressIsValid()
virDomainDeviceUSBAddressIsValid()
virDomainDeviceVirtioSerialAddressIsValid()
Remove them, and replace their call sites with "1" which is what they
currently return. In some cases this means we can remove an entire
if block.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
We can't call qemuCapsExtractVersionInfo() from test code, because it
expects to be able to call the emulator, and for testing we have fake
emulators that can't be executed. For that reason qemuxml2argvtest.c
doesn't call qemuDomainAssignPCIAddresses(), instead it open codes its
own version.
That means we can't call qemuDomainAssignAddresses() from the test code,
instead we need to manually call qemuDomainAssignSpaprVioAddresses().
Also add logic to cope with qemuDomainAssignSpaprVioAddresses() failing,
so that we can write a test that checks for a known failure in there.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
KVM will be able to use a PCI SCSI controller even on POWER. Let
the user specify the vSCSI controller by other means than a default.
After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d09f6ba5fe introduced a regression in event
registration. virDomainEventCallbackListAddID() will only return a positive
integer if the type of event being registered is VIR_DOMAIN_EVENT_ID_LIFECYCLE.
For other event types, 0 is always returned on success. This has the
unfortunate side effect of not enabling remote event callbacks because
remoteDomainEventRegisterAny() uses the return value from the local call to
determine if an event callback needs to be registered on the remote end.
Make sure virDomainEventCallbackListAddID() returns the callback count for the
eventID being registered.
Signed-off-by: Adam Litke <agl@us.ibm.com>
The new introduced optional attribute "copy_on_read</code> controls
whether to copy read backing file into the image file. The value can
be either "on" or "off". Copy-on-read avoids accessing the same backing
file sectors repeatedly and is useful when the backing file is over a
slow network. By default copy-on-read is off.
Earlier, when the number of vcpus was greater than the topology allowed,
libvirt didn't raise an error and continued, resulting in running qemu
with parameters making no sense. Even though qemu did not report any
error itself, the number of vcpus was set to maximum allowed by the
topology.
Detected by Coverity. Although unlikely, if we are ever started
with stdin closed, we could reach a situation where we open a
uuid file but then fail to close it, making that file the new
stdin for the rest of the process.
* src/util/uuid.c (getDMISystemUUID): Allow for stdin.
Currently the LXC controller attempts to deal with EOF on a
tty by spawning a thread to do an edge triggered epoll_wait().
This avoids the normal event loop spinning on POLLHUP. There
is a subtle mistake though - even after seeing POLLHUP on a
master PTY, it is still perfectly possible & valid to write
data to the PTY. There is a buffer that can be filled with
data, even when no client is present.
The second mistake is that the epoll_wait() thread was not
looking for the EPOLLOUT condition, so when a new client
connects to the LXC console, it had to explicitly send a
character before any queued output would appear.
Finally, there was in fact no need to spawn a new thread to
deal with epoll_wait(). The epoll file descriptor itself
can be poll()'d on normally.
This patch attempts to deal with all these problems.
- The blocking epoll_wait() thread is replaced by a poll
on the epoll file descriptor which then does a non-blocking
epoll_wait() to handle events
- Even if POLLHUP is seen, we continue trying to write
any pending output until getting EAGAIN from write.
- Once write returns EAGAIN, we modify the epoll event
mask to also look for EPOLLOUT
* src/lxc/lxc_controller.c: Avoid stalled I/O upon
connected to an LXC console
If client stream does not have any data to sink and neither received
EOF, a dummy packet is sent to the daemon signalising client is ready to
sink some data. However, after we added event loop to client a race may
occur:
Thread 1 calls virNetClientStreamRecvPacket and since no data are cached
nor stream has EOF, it decides to send dummy packet to server which will
sent some data in turn. However, during this decision and actual message
exchange with server -
Thread 2 receives last stream data from server. Therefore an EOF is set
on stream and if there is a call waiting (which is not yet) it is woken
up. However, Thread 1 haven't sent anything so far, so there is no call
to be woken up. So this thread sent dummy packet to daemon, which
ignores that as no stream is associated with such packet and therefore
no reply will ever come.
This race causes client to hang indefinitely.
QEMU does not support security_model for anything but 'path' fs driver type.
Currently in libvirt, when security_model ( accessmode attribute) is not
specified it auto-generates it irrespective of the fs driver type, which
can result in a qemu error for drivers other than path. This patch ensures
that the qemu cmdline is correctly generated by taking into account the
fs driver type.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
If a system has 64 or more VF's, it is quite tedious to mention each VF
in the interface pool.
The following modification will implicitly create an interface pool from
the SR-IOV PF.
