The strncpy() function has this quirk where it will copy
*up* to the requested number of bytes, that is, it will
stop early if it encounters a NULL byte in the source
string.
This makes it legal to pass the size of the destination
buffer (minus one byte needed for the string terminator)
as the number of bytes to copy and still get something
somewhat reasonable out of the operation; unfortunately,
it also makes the function difficult to reason about
and way too easy to misuse.
We want to move away from the way strncpy() behaves and
towards better defined semantics, where virStrncpy()
will always copy *exactly* the number of bytes it's
been asked to copy; before we can do that, though, we
have to change a few of the callers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There were a few places in our code where the following pattern in 'if'
condition occurred:
if ((foo = bar() < 0))
do something;
This patch adjusts the conditions to the expected format:
if ((foo = bar()) < 0)
do something;
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1488192
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The recently added sanlock_strerror function can be used to translate
sanlock's numeric errors into human readable strings.
https://bugzilla.redhat.com/show_bug.cgi?id=1409511
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1292984
Hold on to your hats, because this is gonna be wild.
In bd3e16a3 I've tried to expose sanlock io_timeout. What I had
not realized (because there is like no documentation for sanlock
at all) was very unusual way their APIs work. Basically, what we
do currently is:
sanlock_add_lockspace_timeout(&ls, io_timeout);
which adds a lockspace to sanlock daemon. One would expect that
io_timeout sets the io_timeout for it. Nah! That's where you are
completely off the tracks. It sets timeout for next lockspace you
will probably add later. Therefore:
sanlock_add_lockspace_timeout(&ls, io_timeout = 10);
/* adds new lockspace with default io_timeout */
sanlock_add_lockspace_timeout(&ls, io_timeout = 20);
/* adds new lockspace with io_timeout = 10 */
sanlock_add_lockspace_timeout(&ls, io_timeout = 40);
/* adds new lockspace with io_timeout = 20 */
And so on. You get the picture.
Fortunately, we don't allow setting io_timeout per domain or per
domain disk. So we just need to set the default used in the very
first step and hope for the best (as all the io_timeout-s used
later will have the same value).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we are checking for sanlock_add_lockspace_timeout
which is good for now. But in a subsequent patch we are going to
use sanlock_write_lockspace (which sets an initial value for io
timeout for sanlock). Now, there is no reason to check for both
functions in sanlock library as the sanlock_write_lockspace was
introduced in 2.7 release and the one we are currently checking
for in the 2.5 release. Therefore it is safe to assume presence
of sanlock_add_lockspace_timeout when sanlock_write_lockspace
is detected.
Moreover, the macro for conditional compilation is renamed to
HAVE_SANLOCK_IO_TIMEOUT (as it now encapsulates two functions).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1251190
So, if domain loses access to storage, sanlock tries to kill it
after some timeout. So far, the default is 80 seconds. But for
some scenarios this might not be enough. We should allow users to
adjust the timeout according to their needs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When acquiring resource via sanlock fails, we would report it as
VIR_ERR_INTERNAL_ERROR, which is not very friendly to applications using
libvirt. Moreover, the lockd driver would report the same failure as
VIR_ERR_RESOURCE_BUSY, which looks better.
Unfortunately, in sanlock driver we don't really know if acquiring the
resource failed because it was already locked or there was another
reason behind. But the end result is the same and I think using
VIR_ERR_RESOURCE_BUSY reason for all acquire failures is still better
than what we have now.
https://bugzilla.redhat.com/show_bug.cgi?id=1165119
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit v1.2.4-52-gda879e5 fixed issues with domains started before
sanlock driver was enabled by checking whether a running domain is
registered with sanlock and if it's not, sanlock driver is basically
ignored for the domain.
However, it was checking this even for domain which has just been
started and no sanlock_* API was called for them yet. This results in
cmd 9 target pid 2135544 not found
error messages to appear in sanlock.log whenever we start a new domain.
This patch avoids this useless check for freshly started domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Remove the resize flag and use the same code path for all callers.
This flag was added by commit 18f0316 to allow virStorageFileResize
use 'safezero' while preserving the behavior.
Explicitly return -2 when a fallback to a different method should
be done, to make the code path more obvious.
Fail immediately when ftruncate fails in the mmap method,
as we did before commit 18f0316.
Currently virStorageFileResize() function uses build conditionals to
choose either the posix_fallocate() or syscall(SYS_fallocate) with no
fallback in order to preallocate the space in the newly resized file.
Since the safezero code has a similar set of conditionals modify the
resize and safezero code in order to allow the resize logic to make use
of safezero to unify the look/feel of the code paths.
Add a new boolean (resize) to safezero() to make the optional decision
whether to try syscall(SYS_fallocate) if the posix_fallocate fails because
HAVE_POSIX_FALLOCATE is not defined (eg, return -1 and errno == 0).
Create a local safezero_sys_fallocate in order to handle the resize
code paths that support that. If not present, the set errno = ENOSYS
in order to allow the caller to handle the failure scenarios.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On some places in the libvirt code we have:
f(a,z)
instead of
f(a, z)
This trivial patch fixes couple of such occurrences.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
When a domain was started without registration in sanlock, but libvirt
was restarted after that, most of the operations failed due to
contacting sanlock about that process. E.g. migration could not be
performed because the locks couldn't be released (or inquired before a
release).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088034
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Just move some code around for future patches to ease the review.
With this patch there is no need for drastic cleanup path later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=905282https://bugzilla.redhat.com/show_bug.cgi?id=967494
When lock failure is detected by sanlock, our sanlock_helper kill script
will try to restart (shutdown followed by start) the affected domain
when RESTART action is configured for it. While shutting down kills QEMU
and removes all its leases (which is what sanlock wants to happen),
trying to start it again just hangs because libvirt tries reacquire the
locks in the failed lock space. Hence, this action cannot be supported
by sanlock driver.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=905280https://bugzilla.redhat.com/show_bug.cgi?id=967493
Sanlock expects that the configured kill script either kills the PID on
lock failure or removes all locks the PID owns. If none of the two
options happen, sanlock will reboot the host. Although IGNORE action is
supposed to ignore the request to kill the PID or remove all leases,
it's certainly not designed to cause the host to be rebooted. That said,
IGNORE action is incompatible with sanlock and should be forbidden by
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Convert the sanlock and lockd lock driver plugins over to use
the new virCryptoHashString APIs instead of having their own
duplicated code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Libvirt uses a domain name to fill in owner_name in sanlock_options in
virLockManagerSanlockAcquire. Unfortunately, owner_name is limited to
SANLK_NAME_LEN characters (including trailing '\0'), which means domains
with longer names fail to start when sanlock is enabled. However, we can
truncate the name when setting owner_name as explained by sanlock's
author:
Setting sanlk_options or the owner_name is unnecessary, and has very
little to no benefit. If you do provide something in owner_name, it can
be anything, sanlock doesn't care or use it.
If you run the command "sanlock status", the output will display a list
of clients connected to the sanlock daemon. This client list is
displayed as "pid owner_name" if the client has provided an owner_name
via sanlk_options. This debugging output is the only usage of
owner_name, so its only benefit is to potentially provide a more human
friendly output for debugging purposes.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
POSIX does not guarantee whether uid_t and gid_t are signed or
unsigned, nor does it guarantee whether they are smaller, same
size, or larger than int (or even the same size as one another).
Therefore, it is possible to have platforms where '(uid_t)-1==-1'
is false or where 'uid = gid = -1' sets uid to the wrong value,
thanks to integer promotion rules. The only portable way to use
the placeholder value of these two types is to always use a cast.
Thankfully, the issue is mostly theoretical - sanlock only
compiles on Linux for now, and on Linux, these types do not
suffer from strange promotion problems.
* src/locking/lock_driver_sanlock.c
(virLockManagerSanlockSetupLockspace, virLockManagerSanlockInit)
(virLockManagerSanlockCreateLease): Cast -1 to proper type before
comparing with uid_t or gid_t.
Since sanlock doesn't run under root:root, we have chown()'ed the
__LIBVIRT__DISKS__ lease file to the user:group defined in the
sanlock config. However, when writing the patch I've forgot about
lease files for each disk (this is the
/var/lib/libvirt/sanlock/<md5>) file.
Currently, if sanlock is already registering a lockspace other
libvirtd instances (from other hosts) obtain -EINPROGRESS. On
sufficiently new sanlock, sanlock_inq_lockspace() is called,
which suspend execution until lockspace state is changed. With
current libvirt implementation, we fail to retry adding the
lockspace again but continue in error path. Therefore we produce
meaningless error message:
virLockManagerSanlockSetupLockspace:363 : Unable to add lockspace
/var/lib/libvirt/sanlock/__LIBVIRT__DISKS__: Success
qemudLoadDriverConfig:558 : Failed to load lock manager sanlock
We should try to re-add the lockspace after its state change to
be sure it was added successfully. In fact, with sufficiently new
sanlock we can just avoid dummy usleep() which is used if there's
no inquire API.
It may take some time for sanlock to add a lockspace. And if user
restart libvirtd service meanwhile, the fresh daemon can fail adding
the same lockspace with EINPROGRESS. Recent sanlock has
sanlock_inq_lockspace() function which should block until lockspace
changes state. If we are building against older sanlock we should
retry a few times before claiming an error. This issue can be easily
reproduced:
for i in {1..1000} ; do echo $i; service libvirtd restart; sleep 2; done
20
Stopping libvirtd daemon: [FAILED]
Starting libvirtd daemon: [ OK ]
21
Stopping libvirtd daemon: [ OK ]
Starting libvirtd daemon: [ OK ]
22
Stopping libvirtd daemon: [ OK ]
Starting libvirtd daemon: [ OK ]
error : virLockManagerSanlockSetupLockspace:334 : Unable to add
lockspace /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__: Operation now in
progress
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
