While no part of cmd line building process currently depends on a
host NUMA configuration, this will change soon. Use freshly
changed virnumamock from qemuxml2argvtest and make the mock read
NUMA data from vircaps2xmldata which seems to have the most rich
NUMA configuration.
This also means, we have to start building virnumamock
unconditionally. But this is not a problem, since nothing inside
of the mock relies on Linux specificity. The whole mock is merely
just reading files and parsing them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce a mock of virNumaGetNodeOfCPU() because soon we will
need virNumaCPUSetToNodeset() to return predictable results.
Also, fill in missing symlinks in vircaps2xmldata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, we have a function that expands given list of NUMA nodes
into list of CPUs. But soon, we are going to need the inverse -
expand list of CPUs into list of NUMA nodes. Introduce
virNumaCPUSetToNodeset() for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Technically, there's nothing libnuma specific about
virNumaNodesetToCPUset(). It just implements a generic algorithm
over virNumaGetNodeCPUs() (which is then libnuma dependant).
Nevertheless, there's no need to have this function living inside
WITH_NUMACTL block. Any error returned from virNumaGetNodeCPUs()
(including the one that !WITH_NUMACTL stub returns) is propagated
properly.
Move the function out of the block into a generic one and drop
the !WITH_NUMACTL stub.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have this crazy backwards compatibility when it comes to
serial and console devices. Basically, in same cases the very
first <console/> is just an alias to the very first <serial/>
device. This is to be seen at various places:
1) virDomainDefFormatInternalSetRootName() - when generating
domain XML, the <console/> configuration is basically ignored
and corresponding <serial/> config is formatted,
2) virDomainDefAddConsoleCompat() - which adds a copy of
<serial/> or <console/> into virDomainDef in post parse.
And when talking to QEMU we need a special handling too, because
while <serial/> is generated on the cmd line, the <console/> is
not. And in a lot of place we get it right. Except for generating
device aliases. On domain startup the 'expected' happens and
devices get "serial0" and "console0" aliases, correspondingly.
This ends up in the status XML too. But due to aforementioned
trick when formatting domain XML, "serial0" ends up in both
'virsh dumpxml' and the status XML. But internally, both devices
have different alias. Therefore, detaching the device using
<console/> fails as qemuDomainDetachDeviceChr() tries to detach
"console0".
After the daemon is restarted and status XML is parsed, then
everything works suddenly. This is because in the status XML both
devices have the same alias.
Let's generate correct alias from the beginning.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2156300
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Other APIs that internally use QEMU migration and need to temporarily
suspend a domain already report failure to resume vCPUs by setting
VIR_DOMAIN_PAUSED_API_ERROR state reason and emitting
VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR.
Let's do the same in qemuMigrationSrcRestoreDomainState for consistent
behavior.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some APIs (migration, save/restore, snapshot, ...) require a domain to
be suspended temporarily. In case resuming the domain fails, the domain
will be unexpectedly left paused when the API finishes. This situation
is reported via VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR detail. But we do not have a
corresponding reason for VIR_DOMAIN_PAUSED state and the reason would
remain set to the value used when the domain was paused. So the state
reason would suggest the operation is still running.
This patch changes the state reason to a new VIR_DOMAIN_PAUSED_API_ERROR
to make it clear the API that paused the domain already finished, but
failed to resume the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some vhostuser daemons, we validate that the guest memory is shared
with the host.
With earlier versions of QEMU, it was only possible to mark memory
as shared by defining an explicit NUMA topology. Later, QEMU exposed
the name of the default memory backend (defaultRAMid) so we can mark
that memory as shared.
Since libvirt commit:
commit bff2ad5d6b
qemu: Relax validation for mem->access if guest has no NUMA
we already check for the case when user requests shared memory,
but QEMU did not expose defaultRAMid.
Drop the duplicit check from vhostuser device validation, to make
it pass on hotplug even after libvirtd restart.
This avoids the need to store the defaultRAMid, since we don't really
need it for anything after the VM has been already started.
https://bugzilla.redhat.com/show_bug.cgi?id=2078693https://bugzilla.redhat.com/show_bug.cgi?id=2177701
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have SELinux support for passt, we want things to
work out of the box and that requires having the passt-specific
SELinux bits installed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Currently the 'Releases' column pointed to the generic page about the
specific go module. Change the link to point to the respective
pkg.go.dev page for the module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The releases directory is empty. Don't advertise it on our downloads
page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The directory doesn't exist. The project also doesn't have any releases
on gitlab so there's nothing to replace it with.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We split off the downloads into a new subdomain. Link directly to it
instead of relying on redirects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
- drop the link to the FTP server which doesn't exist any more
- change links to libvirt.org/source to download.libvirt.org
- change link to the maven repository to point to download.libvirt.org
- change link to javadoc to the documentation generated via gitlab job
in the libvirt-java project
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Conversion of the wiki to static pages means that the integrated search
no longer functions. Use the same approach we have for other search to
simply defer to google.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The platform check which determines when to apply the fixups mentions
all officially supported build targets (per docs/platforms.rst) thus
it's not really necessary.
Additionally while not explicitly written as supported the check does
not work properly when building with the MinGW toolchain on Windows as
it does not apply the needed transformations. They are necessary
there the same way as with MinGW on Linux.
https://gitlab.com/libvirt/libvirt/-/issues/453
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a few places we still use the good old:
sizeof(var) / sizeof(var[0])
sizeof(var) / sizeof(int)
The G_N_ELEMENTS() macro is preferred though. In a few places we
don't link with glib, so provide the macro definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
set useBinarySpecificLabel = true when calling qemuSecurityCommandRun
for the passt process, so that the new process context will include
the binary-specific label that should be used for passt (passt_t)
rather than svirt_t (as would happen if useBinarySpecificLabel was
false). (The MCS part of the label, which is common to all child
processes related to a particular qemu domain instance, is also set).
Resolves: https://bugzilla.redhat.com/2172267
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Normally when a child process is started by libvirt, the SELinux label
of that process is set to virtd_t (plus an MCS range). In at least one
case (passt) we need for the SELinux label of a child process label to
match the label that the binary would have transitioned to
automatically if it had been run standalone (in the case of passt,
that label is passt_t).
This patch modifies virSecuritySELinuxSetChildProcessLabel() (and all
the functions above it in the call chain) so that the toplevel
function can set a new argument "useBinarySpecificLabel" to true. If
it is true, then virSecuritySELinuxSetChildProcessLabel() will call
the new function virSecuritySELinuxContextSetFromFile(), which uses
the selinux library function security_compute_create() to determine
what would be the label of the new process if it had been run
standalone (rather than being run by libvirt) - the MCS range from the
normally-used label is added to this newly derived label, and that is
what is used for the new process rather than whatever is in the
domain's security label (which will usually be virtd_t).
In order to easily verify that nothing was broken by these changes to
the call chain, all callers currently set useBinarySpecificPath =
false, so all behavior should be completely unchanged. (The next
patch will set it to true only for the case of running passt.)
https://bugzilla.redhat.com/2172267
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Neither of these are modified anywhere in the function, and the
function will soon be called with an arg that actually is a const.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The binary to be exec'ed by virExec() is stored in
virCommand::args[0], and is resolved to a full absolute path (stored
in a local of virExec() just prior to execve().
Since we will have another use for the full absolute path, lets make
an API to resolve/retrieve the absolute path, and cache it in
virCommand::binaryPath so we only have to do the resolution once.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libxl added support for specifying custom firmware paths long ago. The
functionality exists in all Xen version supported by libvirt. This patch
adds support for user-specified efi firmware paths in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
passt provides an AppArmor abstraction that covers all the
inner details of its operation, so we can simply import that
and add the libvirt-specific parts on top: namely, passt
needs to be able to create a socket and pid file, while
the libvirt daemon needs to be able to kill passt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 54fa1b44af ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d4 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.
Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.
Correct this, and add some XML/argv tests.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Good to have for debugging in case something wrong happens during
incoming migration.
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For shutoff VMs we don't have the storage source backing chain
populated so it will fail this check and error out. Move it to
part that is done only when VM is running.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Capability to determine whether this qemu supports the 'blob' option for
virtio-gpu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than storing the video type as an integer, use the proper enum
type within the struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virDomainVideoModelDefParseXML(), use the virXMLProp* functions
rather than reimplementing them with virXPath* functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function allows you to specify a default value to return if the
property is not found rather than always setting *result to 0.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Factor out a separate function to parse out the <model> element for
video devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensure that new virDomainVideoDef objects have their 'type' set to
VIR_DOMAIN_VIDEO_TYPE_DEFAULT and remove places that this value is set
after construction. Since virDomainVideoDefNew() uses g_new0() allocate
the instance, all fields are initialized to 0.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the quiet version of virPidFileAcquirePath and remove the error
reset, since there's nothing to reset anymore.
https://bugzilla.redhat.com/show_bug.cgi?id=2171973
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>