Commit Graph

16 Commits

Author SHA1 Message Date
John Ferlan
cb91d5cc58 util: Remove NONNULL(2) for virNetDevBandwidthPlug
Since the code checks and handles a NULL 'net_bandwidth' parameter,
so no need for NONNNULL.
2017-03-22 13:50:00 -04:00
Michal Privoznik
45090449c4 virNetDevBandwidthUpdateRate: turn class_id into integer
This is no functional change. It's just that later in the series we
will need to pass class_id as an integer.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-11 16:10:32 +02:00
Michal Privoznik
176a95fd50 Introduce virNetDevBandwidthUpdateFilter
This is a simple wrapper around virNetDevBandwidthManipulateFilter() that
will update the desired filter on an interface (usually a network bridge)
with a new MAC address. Although, the MAC address in question usually
refers to some other interface - the one that the filter is constructed
for. Yeah, hard to parse. Thing is, our NATed network has a bridge where
some part of QoS takes place. And vNICs from guests are plugged into
the bridge. However, if a guest decides to change the MAC of its vNIC,
the corresponding qemu process emits an event which we can use to
update the QoS configuration based on the new MAC address.. However,
our QoS hierarchy is currently not notified, therefore it falls apart.
This function (when called in response to the aforementioned event)
will update our QoS hierarchy and duct tape it together again.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-04-17 10:49:03 +02:00
Laine Stump
153b06c6d1 util: check for null ifname inside virNetDevBandwidthSet()
Previously this function relied on having ATTRIBUTE_NONNULL(1) in its
prototype rather than explicitly checking for a null
ifname. Unfortunately, ATTRIBUTE_NONNULL is just a hint to the
optimizer and code analyzers like Coverity, it doesn't actually check
anything at execution time, so the result was possible warnings from
Coverity, along with the possibility of null dereferences when ifname
wasn't available.

This patch removes the ATTRIBUTE_NONNULL from the prototype, and
checks ifname inside the function, logging an error if it's NULL (once
we've determined that the user really is trying to set a bandwidth).
2015-02-25 13:10:34 -05:00
Laine Stump
118b240808 network: only clear bandwidth if it has been set
libvirt was unconditionally calling virNetDevBandwidthClear() for
every interface (and network bridge) of a type that supported
bandwidth, whether it actually had anything set or not. This doesn't
hurt anything (unless ifname == NULL!), but is wasteful.

This patch makes sure that all calls to virNetDevBandwidthClear() are
qualified by checking that the interface really had some bandwidth
setup done, and checks for a null ifname inside
virNetDevBandwidthClear(), silently returning success if it is null
(as well as removing the ATTRIBUTE_NONNULL from that function's
prototype, since we can't guarantee that it is never null,
e.g. sometimes a type='ethernet' interface has no ifname as it is
provided on the fly by qemu).
2015-02-25 13:09:34 -05:00
Michal Privoznik
122cd16982 Revert "networkAllocateActualDevice: Set QoS for bridgeless networks too"
This reverts commit 2996e6be19
and some parts of 2636dc8c4d.

The former one tried to implement QoS setting on bridgeless networks.
However, as discussed upstream [1], the patch is far away from being
useful in even a single case. The whole idea of network QoS is to have
aggregated limits over several interfaces. This patch is doing
completely the opposite when merging two QoS settings (from the network
and the domain interface) into one which is then set at the domain
interface itself, not the network.

The latter one is the test for the previous one. Now none of them makes
sense.

1: https://www.redhat.com/archives/libvir-list/2014-January/msg01441.html

Conflicts:
	tests/virnetdevbandwidthtest.c: New test has been introduced since
    then.
2014-01-29 19:01:19 +01:00
Michal Privoznik
2996e6be19 networkAllocateActualDevice: Set QoS for bridgeless networks too
https://bugzilla.redhat.com/show_bug.cgi?id=1055484

Currently, libvirt's XML schema of network allows QoS to be defined for
every network even though it has no bridge. For instance:

<network>
    <name>vdsm-no-bridge</name>
    <forward mode='passthrough'>
      <interface dev='em1.10'/>
    </forward>
    <bandwidth>
        <inbound average='1000' peak='5000' burst='1024'/>
        <outbound average='1000' burst='1024'/>
    </bandwidth>
</network>

The bandwidth limitations can be, however, applied even on such
networks. In fact, they are going to be applied on the interface that
will be connected to the network on a domain startup. This approach,
however, has one limitation. With bridged networks, there are two points
where QoS can be set: bridge and domain interface. The lower limit of
the two is enforced then. For instance, if the interface has 10Mbps
average, but the network only 1Mbps, there's no way for interface to
transmit packets faster than the 1Mbps limit. With two points this is
enforced by kernel.  With only one point, we must combine both QoS
settings into one which is set afterwards. Look at
virNetDevBandwidthMinimal() and you'll understand immediately what I
mean.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-01-27 12:11:27 +01:00
Eric Blake
955af4d4c1 maint: avoid 'const fooPtr' in virnet files
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up remaining offenders in src/util.

* src/util/virnetdev.h (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Use intended type.
* src/util/virnetdevbandwidth.h (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.h (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.h (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.h (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.h (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.h
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate): Likewise.
* src/util/virnetlink.h (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
* src/util/virnetdev.c (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Fix fallout.
* src/util/virnetdevbandwidth.c (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.c (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.c (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.c (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.c (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.c
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate)
(virNetDevVPortProfileOpSetLink, virNetDevVPortProfileOpCommon)
(virNetDevVPortProfileOp8021Qbg, virNetDevVPortProfileOp8021Qbh):
Likewise.
* src/util/virnetlink.c (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-14 13:05:34 -06:00
Michal Privoznik
b697411ca0 bandwidth: Create rate update function
This will be used whenever a NIC with guaranteed throughput is to
be plugged into a bridge. It will adjust the average throughput of
non guaranteed NICs (classid 1:2) to meet new requirements.
2012-12-11 18:36:55 +01:00
Michal Privoznik
7cdbacb472 bandwidth: Create (un)plug functions
These set bridge part of QoS when bringing domain's interface up.
Long story short, if there's a 'floor' set, a new QoS class is created.
ClassID MUST be unique within the bridge and should be kept for
unplug phase.
2012-12-11 18:36:55 +01:00
Michal Privoznik
67159f1c60 bandwidth: Create hierarchical shaping classes
These classes can borrow unused bandwidth. Basically,
only egress qdsics can have classes, therefore we can
do this kind of traffic shaping only on host's outgoing,
that is domain's incoming traffic.
2012-12-11 18:36:55 +01:00
Michal Privoznik
ec6474b245 bandwidth: add new 'floor' attribute
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.

From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
2012-12-11 18:35:12 +01:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Martin Kletzander
2f678bb10f virNetDevBandwidthClear: Improve error handling
Two changes are introduced in this patch:

 - The first change removes ATTRIBUTE_RETURN_CHECK from
   virNetDevBandwidthClear, because it was called with ignore_value
   always, anyway. The function is used even when it's not necessary
   to call it, just for cleanup purposes.

 - The second change is added ignoring of the command's exit status,
   since it may report an error even when run just as "to be sure we
   clean up" function. No libvirt errors are suppresed by this.
2012-09-18 16:41:13 +02:00
Osier Yang
f9ce7dad60 Desert the FSF address in copyright
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c
2012-07-23 10:50:50 +08:00
Daniel P. Berrange
d3406045fd Split src/util/network.{c,h} into 5 pieces
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines

 - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
 - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
 - src/util/virsocketaddr.c: virSocketAddr and APIs
 - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
   for virNetDevBandwidth
 - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
   for virNetDevVPortProfile

* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
  src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
  src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
  src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
  src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
  src/conf/domain_conf.h, src/conf/network_conf.c,
  src/conf/network_conf.h, src/conf/nwfilter_conf.h,
  src/esx/esx_util.h, src/network/bridge_driver.c,
  src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
  src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
  src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
  src/util/virnetdev.h, src/util/virnetdevtap.c,
  tools/virsh.c: Update include files
2011-11-15 10:27:54 +00:00