This test shows a bug we have: even though the XML says:
<allocation mode='immediate'/>
there is no -mem-prealloc nor .prealloc=yes anywhere on the cmd
line. This will be fixed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the test closer to other graphics-spice tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit 7300ccc9b3.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit da896d440c.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
rbd encryption is new in qemu 6.1.0.
This commit adds a new encryption engine property which
allows the user to use this new encryption engine.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same test in regards to the 'panic' device is the 'panic-double'
case, thus panic-isa can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change introduces a new libvirt sub-element <pci> under
<features> that can be used to configure all pci related features.
Currently the only sub-sub element supported by this sub-element is
'acpi-bridge-hotplug' as shown below:
<features>
<pci>
<acpi-bridge-hotplug state='on|off'/>
</pci>
</features>
The above option is only available for the QEMU driver, for x86 guests
only. It is a global option, affecting all PCI bridge controllers on
the guest.
The 'acpi-bridge-hotplug' option enables or disables ACPI hotplug
support for cold-plugged pci bridges. Examples of bridges include the
PCI-PCI bridge (pci-bridge controller) for pc (i440fx) machinetypes,
or PCIe-PCI bridges and pcie-root-port controllers for q35
machinetypes.
For pc machinetypes in x86, this option has been available in QEMU
since version 2.1. Please see the following changes in qemu repo:
9e047b982452c6 ("piix4: add acpi pci hotplug support")
133a2da488062e ("pc: acpi: generate AML only for PCI0 devices if PCI
bridge hotplug is disabled")
For q35 machinetypes, this was introduced in QEMU 6.1 with the
following changes in qemu repo:
(a) c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
(b) 17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on
Q35")
The reasons for enabling ACPI based hotplug for PCIe (q35) based
machines (as opposed to native hotplug) are outlined in (b). There are
use cases where users would still want to use native
hotplug. Therefore, this config option enables users to choose either
ACPI based hotplug or native hotplug for bridges (for example for pcie
root port controller in q35 machines).
Qemu capability validation checks have also been added along with
related unit tests to exercise the new conf option.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
The capability name piix4-acpi-root-hotplug-en is not conventional and
appreared to be confusing to some. "en" suffix is also incorrect as the
capability in qemu is used to both enable and disable hotplug on the pci root
bus on the i440fx. Hence, rename it to piix4.acpi-root-pci-hotplug so that it
is clearer, less confusing and more accurate.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces libvirt xml support to enable/disable hotplug on the
pci-root controller. It adds a 'target' subelement for the pci-root controller
with a 'hotplug' property. This property can be used to enable or disable
hotplug for the pci-root controller. For example, in order to disable hotplug
on the pci-root controller, one has to use set '<target hotplug='off'>' as
shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='on'>' option would enable hotplug for pci-root controller.
This is also the default value. This option is only available for pc machine
types and is applicable for qemu/kvm accelerator only.This feature was
introduced from qemu version 5.2 with the following change in qemu repository:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The above qemu commit describes some reasons why users might to disable hotplug
on PCI root buses.
Related unit tests to exercise the new conf option has also been added.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The virtio-mem is paravirtualized mechanism of adding/removing
memory to/from a VM. A virtio-mem-pci device is split into blocks
of equal size which are then exposed (all or only a requested
portion of them) to the guest kernel to use as regular memory.
Therefore, the device has two important attributes:
1) block-size, which defines the size of a block
2) requested-size, which defines how much memory (in bytes)
is the device requested to expose to the guest.
The 'block-size' is configured on command line and immutable
throughout device's lifetime. The 'requested-size' can be set on
the command line too, but also is adjustable via monitor. In
fact, that is how management software places its requests to
change the memory allocation. If it wants to give more memory to
the guest it changes 'requested-size' to a bigger value, and if it
wants to shrink guest memory it changes the 'requested-size' to a
smaller value. Note, value of zero means that guest should
release all memory offered by the device. Of course, guest has to
cooperate. Therefore, there is a third attribute 'size' which is
read only and reflects how much memory the guest still has. This
can be different to 'requested-size', obviously. Because of name
clash, I've named it 'current' and it is dealt with in future
commits (it is a runtime information anyway).
In the backend, memory for virtio-mem is backed by usual objects:
memory-backend-{ram,file,memfd} and their size puts the cap on
the amount of memory that a virtio-mem device can offer to a
guest. But we are already able to express this info using <size/>
under <target/>.
Therefore, we need only two more elements to cover 'block-size'
and 'requested-size' attributes. This is the XML I've came up
with:
<memory model='virtio-mem'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>2048</pagesize>
</source>
<target>
<size unit='KiB'>2097152</size>
<node>0</node>
<block unit='KiB'>2048</block>
<requested unit='KiB'>1048576</requested>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</memory>
I hope by now it is obvious that:
1) 'requested-size' must be an integer multiple of
'block-size', and
2) virtio-mem-pci device goes onto PCI bus and thus needs PCI
address.
Then there is a limitation that the minimal 'block-size' is
transparent huge page size (I'll leave this without explanation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU added the capability to disable file transfers via spice in commit
5ad24e5f3b ("spice: Add -spice disable-agent-file-transfer cmdline
option (rhbz#961850)") released in qemu-v1.6.0 and the option can't be
disabled.
Remove the unnecessary validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu supports this since 81b2b81062 ("fw_cfg: insert fw_cfg file blobs
via qemu cmdline") released in qemu-v2.4.0 and it can't be compiled out.
Assume that the option always works and remove the corresponding check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since qemu commit 3d3b8303c6 ("showing a splash picture when
start") released in qemu-v1.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since ac05f34924 ("add a boot parameter to set reboot
timeout") released in qemu-v1.3.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently disk-virtio-queues test is now using specifying a fake
capability.
By this commit this test will make use of DO_TEST_CAPS_LATEST.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This essentially reverts:
commit ca5c8e1dc7
qemuxml2argvtest: Avoid conditions in test macro
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass a pointer to the 'ret' variable to the test executor itself and
update it there to improve compile times of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass a pointer to the 'ret' variable to the test executor itself and
update it there to improve compile times of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we've ran into problems when 'testQemuInfoSetArgs' failed as
calling the actual test executor could lead to a crash if the data
wasn't prepared but reporting an error doesn't play nicely with our test
output which is handled by 'virTestRun'.
To avoid the issue (and as a side effect improve compilation times of
the test files) split up testQemuInfoSetArgs into two functions.
The first is still called 'testQemuInfoSetArgs' and just blindly
populates arguments into a sub-struct of testQemuInfo. This function no
longer reports errors
A new function 'testQemuInfoInitArgs' which is meant to be called from
the test executor then checks errors and prepares the test data. This
one can fail and the test will be marked as failed appropriately.
A nice side effect is that this vastly improves compile times of
qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We pass multiple caching objects to individual tests which don't change.
To prevent always having to pass them individually to
'testQemuInfoSetArgs' introduce 'struct testQemuConf' which will hold
all of them and just the struct will be passed to the tests.
Additionally this will make the conf available from inside the test run.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemuCaps are now always allocated we don't need to pass
ARG_QEMU_CAPS, QEMU_CAPS_LAST to force the allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'DO_TEST_FULL' isn't a useful wrapper any more. Use the better name for
the main macro and replace all uses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If guest is configured to use memfd then the function that build
memory-backend-* part of command line will put
memory-backend-memfd, always. Even for NVDIMMs. This is not
correct, because NVDIMMs need a backing path (usually to a real
host NVDIMM device). Therefore, regardless of memfd being
requested, we have to stick with memory-backend-file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to change the input file later, and having this
additional coverage will demonstrate that such a change does not
alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next commit will modify the code so that it validates whether
egl-headless is present. Certain tests need to get the egl-headless
capability to keep working properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Next commit will modify the code so that it validates whether SDL is
present. Certain tests need to get the SDL capability to keep working
properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The flag isn't used by the code in any way so it can be dropped from the
legacy test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use the 's390-virtio' machine which was removed in qemu 2.6 and
use real capabilities for the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The "machine-loadparm-multiple-disks-nets-s390" case now requires the
QEMU_CAPS_CCW feature to pass validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
In addition the capability wasn't even used to gate any functionality
except for reporting the presence in the domain capabilities XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported QEMU versions and there isn't a
more elegant way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All tests now get that capability via virQEMUCapsInitQMPBasicArch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Drop all the cases pinned to unsupported versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virQEMUCapsInitQMPBasicArch to add the basic set of capabilities
which all qemu versions will get.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function doesn't fail. Remove the return value and checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it possible to enable stable NIC device names in most modern
Linux distros.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
