Commit Graph

828 Commits

Author SHA1 Message Date
Michal Privoznik
e1b022890e schemas: Introduce disk type NVMe
There is this class of PCI devices that act like disks: NVMe.
Therefore, they are both PCI devices and disks. While we already
have <hostdev/> (and can assign a NVMe device to a domain
successfully) we don't have disk representation. There are three
problems with PCI assignment in case of a NVMe device:

1) domains with <hostdev/> can't be migrated

2) NVMe device is assigned whole, there's no way to assign only a
   namespace

3) Because hypervisors see <hostdev/> they don't put block layer
   on top of it - users don't get all the fancy features like
   snapshots

NVMe namespaces are way of splitting one continuous NVDIMM memory
into smaller ones, effectively creating smaller NVMe-s (which can
then be partitioned, LVMed, etc.)

Because of all of this the following XML was chosen to model a
NVMe device:

  <disk type='nvme' device='disk'>
    <driver name='qemu' type='raw'/>
    <source type='pci' managed='yes' namespace='1'>
      <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </source>
    <target dev='vda' bus='virtio'/>
  </disk>

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Daniel P. Berrangé
6430c00552 conf: pass in default architecture via domain XML options
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.

If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...

 - The test driver is hardcoded to always use i686 arch
 - The VMWare/ESX drivers will always place i686 guests ahead
   of x86_64 guests in capabilities, so effectively they always
   use i686
 - The QEMU driver can potentially return any arch at all
   depending on what combination of QEMU binaries are installed.

The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.

IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.

With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:16 +00:00
Andrea Bolognani
4d0a4b39f8 docs: Update minimum QEMU version for kvm-hint-dedicated
Same fix that was applied to release notes in a595c66a13.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2019-12-06 09:29:05 +01:00
Peter Krempa
4321bd0dd2 docs: Document support for obeying <backingStore> of <disk> on input
Until now we've only supported <backingStore> in an output mode. The
documentation for the element states that hypervisor drivers may start
to obey it in the future.

Update the documentation so that it mentions the recently added
'backingStoreInput' domain capability and explain what happens if it is
supported and <backingStore> is present on input.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-22 12:51:27 +01:00
Jonathon Jongsma
4b95738c8f qemu: add 'ramfb' attribute for mediated devices
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu

For example, the following configuration can be used to provide a vgpu
with a boot display:

    <hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
        <source>
            <address uuid='$UUID'/>
        </source>
    </hostdev>

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-11-14 11:37:50 -05:00
Jonathon Jongsma
cda4d4d212 qemu: fix documentation for video resolution
The video resolution support that was introduced in
7286279797 is specified as a <resolution>
sub-element of <model>, not optional attributes of model.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-11-13 13:08:33 -05:00
Jim Fehlig
962647cac6 docs: Fix attribute names in filesystem/driver example
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2019-11-01 11:46:55 -06:00
Jim Fehlig
cbff7c37f2 docs: Fix version that introduced Xen support for ACPI firmware
Xen support for specifying ACPI firmware path was introduced in the
5.9.0 dev cycle, not 5.8.0 as currently indicated by the docs.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-01 08:23:08 -06:00
Julio Faracco
7286279797 conf: Add 'x' and 'y' resolution into video XML definition
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:

    <model ...>
      <resolution x='800' y='600'/>
    </model>

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
2019-10-17 16:18:34 -04:00
Ivan Kardykov
03e98a52d2 libxl: add acpi slic table support
Libxl driver did not support setup additional acpi firmware to xen
guest. It is necessary to activate OEM Windows installs. This patch
allow to define in OS section acpi table param (which supported domain
common schema).

Signed-off-by: Ivan Kardykov <kardykov@tabit.pro>
[added info to docs/formatdomain.html.in]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
2019-10-10 21:01:54 -06:00
Daniel Henrique Barboza
cab3ea2303 qemu: Implement the ccf-assist pSeries feature
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-09 17:51:47 -04:00
Jonathon Jongsma
fd03d0e692 qemu: add a new video device model 'ramfb'
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.

https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-10-09 14:52:49 -04:00
Luyao Zhong
cd62dbc03b clarify the xml example for NVDIMM more clealy
The NVDIMM backend file can be a normal file or a real device file,
Current xml example and explainations may mislead users. So add more
info about the NVDIMM related elements and update the xml examples.

Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-09-30 16:28:18 +02:00
Marc-André Lureau
1394bf1091 domain: add rendernode attribute on <accel>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-09-24 12:17:39 -04:00
Marc-André Lureau
bc1e924cf0 conf: format/parse/rng/docs for video <driver name='qemu|vhostuser'/>
Accept a new driver name attribute to specify usage of helper process, ex:

  <video>
    <driver name='vhostuser'/>
    <model type='virtio'/>
  </video>

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-09-24 12:17:39 -04:00
Laine Stump
77f72a8615 conf: new "managed" attribute for target dev of <interface type='ethernet'>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.

Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP).  That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).

In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:

   <interface type='ethernet'>
      <target dev='mytap0' managed='no'/>
      ...
   </interface>

This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.

(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-09 14:35:54 -04:00
Vitaly Kuznetsov
65c02db98d conf: add support for Direct Mode for Hyper-V Synthetic timers
Support 'Direct Mode' for Hyper-V Synthetic Timers in domain config.
Make it 'stimer' enlightenment option as it is not a separate thing.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-08-19 11:38:28 +02:00
Wim ten Have
cb12c59dac qemu: support for kvm-hint-dedicated performance hint
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")

This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.

To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.

  <features>
    <kvm>
      <hint-dedicated state='on'/>
    </kvm>
  </features>
  ...
  <cpu mode='host-passthrough ... />

Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-12 15:13:04 +02:00
Paolo Bonzini
0848af78ae docs: formatdomain: explain host-model/host-passthrough requirements
host-passthrough documentation menions that the source and destination
hosts are not identical in both hardware and configuration.  Configuration
actually includes microcode version and QEMU version, but this is not
clear so make it explicit

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190802125415.15227-1-pbonzini@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-08-09 10:55:59 +02:00
Vitaly Kuznetsov
37ce8cfaa3 docs: formatdomain: move 'msrs' out of Hyper-V Enlightenments
Introduced by: commit e9528f41c6

'msrs' is a feature unrelated to Hyper-V Enlightenments, the commit message
which added it and the test have it right:

    <features>
      ...
      <msrs unknown='ignore'>
      ...
    </features>

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-07-30 12:44:58 +02:00
Vitaly Kuznetsov
08dec3b086 docs: formatdomain: fix 'SynIC' spelling
SynIC stands for 'Synthetic Interrupt Controller', it is not a NIC. Fix the
spelling in accordance with Hypervisor Top Level Functional Specification.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-07-30 12:44:58 +02:00
Vitaly Kuznetsov
db9829d795 docs: formatdomain: add stimer flag to the example xml
The example XML we have contains all other Hyper-V Enlightenments but
'stimer' is missing.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-07-30 12:44:58 +02:00
Stefan Berger
b2f6a5c688 docs: Extend TPM docs with new encryption element
Describe the encryption element in the TPM's domain XML.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 10:31:02 +01:00
Ján Tomko
ca12af4915 docs: formatdomain: tsc is supported by QEMU
As of commit 7373c4e48 the QEMU driver also supports TSC.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-07-17 17:33:56 +02:00
Ján Tomko
5c5831c454 docs: formatdomain: remove stray nbsp
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-07-17 17:33:56 +02:00
Jonathon Jongsma
e579f5300b qemu: add 'bochs' video display type
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-07-15 10:21:21 +02:00
Andrea Bolognani
913500936b docs: Update documentation for spapr-vio addresses
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-06-20 12:50:07 +02:00
Andrea Bolognani
73713a54a8 docs: Advertise pcie-to-pci-bridge for use on q35
We support pcie-to-pci-bridge, and prefer it to
dmi-to-pci-bridge, since libvirt 4.3.0, but we didn't
update all the documentation accordingly at the time.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-20 10:03:22 +02:00
Ján Tomko
53f3c43ac7 docs: fix some typos in networkport documentation
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-06-18 14:35:43 +02:00
Daniel P. Berrangé
90064d76bc conf: record a portid against the domain conf
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-17 15:45:09 +01:00
Andrea Bolognani
60f4c41377 conf: Parse and format SMMUv3 IOMMU
SMMUv3 is an IOMMU implementation for ARM virt guests.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-03 17:40:48 +02:00
Erik Skultety
f3e777a3c4 docs: Change the 'Launch Security' section id to "launchSecurity"
Although there's currently only support for SEV, it's likely other
solutions will appear, so we should not refer to the documentation
section simply with 'sev'.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2019-05-23 14:29:00 +02:00
Fabiano Fidêncio
e34b5938a9 docs: Fix typo in the firmware value
firmware attribute from <os/> takes either 'efi' or 'bios' as its
allowed values. However, the current documentation mistakenly mentions
'uefi' instead of 'efi'.

Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
2019-04-29 16:53:26 +02:00
Martin Kletzander
842bc56ad2 conf: Add support for emulatorsched
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-16 13:46:17 +02:00
Martin Kletzander
c79a39e60c docs: Mention iothreadsched element in the docs and reword
Just one missing occurrence of iothreadsched fixed plus some rewording for this
to make more sense for the readers.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-16 13:46:17 +02:00
Pino Toscano
3958e3d6a5 docs: document firmware attribute for VMware guests
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
2019-04-15 20:03:55 -04:00
Jim Fehlig
09eb1ae0ec conf: Add a new 'xenbus' controller type
xenbus is virtual controller (akin to virtio controllers) for Xen
paravirtual devices. Although all Xen VMs have a xenbus, it has
never been modeled in libvirt, or in Xen native VM config format
for that matter.

Recently there have been requests to support Xen's max_grant_frames
setting in libvirt. max_grant_frames is best modeled as an attribute
of xenbus. It describes the maximum IO buffer space (or DMA space)
available in xenbus for use by connected paravirtual devices. This
patch introduces a new xenbus controller type that includes a
maxGrantFrames attribute.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-13 12:06:52 -06:00
Michal Privoznik
d947fa8a08 conf: Introduce firmware attribute to <os/>
The idea is that using this attribute users enable libvirt to
automagically select firmware image for their domain. For
instance:

  <os firmware='efi'>
    <type arch='x86_64' machine='pc-q35-4.0'>hvm</type>
    <loader secure='no'/>
  </os>

  <os firmware='bios'>
    <type arch='x86_64' machine='pc-q35-4.0'>hvm</type>
  </os>

(The automagic of selecting firmware image will be described in
later commits.)

Accepted values are 'bios' and 'efi' to let libvirt select
corresponding type of firmware.

I know it is a good sign to introduce xml2xml test case when
changing XML config parser but that will have to come later.
Firmware auto selection is not enabled for any driver just yet so
any xml2xml test would fail right away.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 15:29:44 +01:00
Andrea Bolognani
73bc4f185e docs: Document configuration quirks for virtio devices
Some devices (namely virtio-scsi, virtio-gpu, virtio-keyboard,
virtio-tablet and virtio-mouse, plus virtio-crypto which is
not supported by libvirt) don't follow the same rules as all
other virtio devices, which is something that ought to be
documented.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-03-11 09:53:55 +01:00
Andrea Bolognani
9eaa2a61c5 docs: Fix version number
virtio-(non-)transitional device models have been introduced
in 5.2.0, not 5.1.0.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2019-03-05 17:09:47 +01:00
Cole Robinson
448a094717 qemu: Support scsi controller model=virtio-{non-}transitional
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:

  <controller type='scsi' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"

The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
47f94f4591 qemu: Support virtio-serial controller model=virtio-{non-}transitional
Add controller type='virtio-serial' model handling for virtio
transitional devices. Ex:

  <controller type='virtio-serial' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-serial-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
2593a1bd1a conf: Add <input model='virtio-{non-}transitional'/>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
6e64899284 qemu: Support vsock model=virtio-{non-}transitional
Add <vsock> model handling for virtio transitional devices. Ex:

  <vsock model='virtio-transitional'>
    ...
  </vsock>

* "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional"
* "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
0f5958f5c5 qemu: Support memballoon model=virtio-{non-}transitional
Add new <memballoon> model values for virtio transitional devices. Ex:

  <memballoon model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
947448e212 conf: Add <filesystem model='virtio-{non-}transitional'/>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:

- virtio
- virtio-transitional
- virtio-non-transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
e063707556 qemu: Support rng model=virtio-{non-}transitional
Add new <rng> model values for virtio transitional devices. Ex:

  <rng model='virtio-transitional'>
    ...
  </rng>

* "virtio-transitional" maps to qemu "virtio-rng-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
ef41ff4219 conf: Add <hostdev model='virtio-{non-}transitional'/>
qemu vhost-scsi devices map to XML roughly like:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn=X/>
    </hostdev>

To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.

Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Cole Robinson
4d964373b5 qemu: Support interface model=virtio-{non-}transitional
Add new <interface> model handling for virtio transitional devices. Ex:

<interface>
  <model type='virtio-transitional'/>
</interface>

* "virtio-transitional" maps to qemu "virtio-net-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Cole Robinson
25d05051b3 conf: Add <disk model='virtio-{non-}transitional'/>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.

Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00