In order to avoid holding an agent job and a normal job at the same
time, we want to avoid accessing the domain's definition while holding
the agent job. To achieve this, qemuAgentGetFSInfo() only returns the
raw information from the agent query to the caller. The caller can then
release the agent job and then proceed to look up the disk alias from
the vm definition. This necessitates moving a few helper functions to
qemu_driver.c and exposing the agent data structure (qemuAgentFSInfo) in
the header.
In addition, because the agent function no longer returns the looked-up
disk alias, we can't test the alias within qemuagenttest. Instead we
simply test that we parse and return the raw agent data correctly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemuAgentDiskInfo structure is filled with information received from
the agent command response, except for the 'alias' field, which is
retrieved from the vm definition. Limit this structure only to data that
was received from the agent message.
This is another intermediate step in moving the responsibility for
searching the vmdef from qemu_agent.c to qemu_driver.c so that we can
avoid holding an agent job and a normal job at the same time.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In an effort to avoid holding both an agent and normal job at the same
time, we shouldn't access the vm definition from within qemu_agent.c
(i.e. while the agent job is being held). In preparation, we need to
store the full filesystem disk information in qemuAgentDiskInfo. In a
following commit, we can pass this information back to the caller and
the caller can search the vm definition to match the filsystem disk to
an alias.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function name doesn't give a good idea of what the function does.
Rename to qemuAgentGetFSInfoFillDisks() to make it more obvious than it
is filling in the disk information in the fsinfo struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update the host CPU code to report the die_id in the NUMA topology
capabilities. On systems with multiple dies, this fixes the bug
where CPU cores can't be distinguished:
<cpus num='12'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' core_id='1' siblings='3'/>
</cpus>
Notice how core_id is repeated within the scope of the same socket_id.
It now reports
<cpus num='12'>
<cpu id='0' socket_id='0' die_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' die_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' die_id='1' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' die_id='1' core_id='1' siblings='3'/>
</cpus>
So core_id is now unique within a (socket_id, die_id) pair.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU since 4.1.0 supports the "dies" parameter for -smp
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When pause-before-switchover QEMU capability is enabled, we get STOP
event before MIGRATION event with postcopy-active state. To properly
handle post-copy migration and emit correct events commit
v4.10.0-rc1-4-geca9d21e6c added a hack to
qemuProcessHandleMigrationStatus which translates the paused state
reason to VIR_DOMAIN_PAUSED_POSTCOPY and emits
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event when migration state changes
to post-copy.
However, the code was effective on both sides of migration resulting in
a confusing VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event on the destination
host, where entering post-copy mode is already properly advertised by
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event.
https://bugzilla.redhat.com/show_bug.cgi?id=1791458
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is only a theoretical leak, but in virChrdevAlloc() we
initialize a mutex and if creating a hash table fails,
then virChrdevFree() is called which because of incorrect check
doesn't deinit the mutex.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When opening a console to a domain, we put a tuple of {path,
virStreamPtr} into a hash table that's private to the domain.
This is to ensure only one client at most has the console stream
open. Later, when the console is closed, the tuple is removed
from the hash table and freed. Except, @path won't be freed.
==234102== 60 bytes in 5 blocks are definitely lost in loss record 436 of 651
==234102== at 0x4836753: malloc (vg_replace_malloc.c:307)
==234102== by 0x5549110: g_malloc (in /usr/lib64/libglib-2.0.so.0.6000.6)
==234102== by 0x5562D1E: g_strdup (in /usr/lib64/libglib-2.0.so.0.6000.6)
==234102== by 0x4A5A917: virChrdevOpen (virchrdev.c:412)
==234102== by 0x17B64645: qemuDomainOpenConsole (qemu_driver.c:17309)
==234102== by 0x4BC8031: virDomainOpenConsole (libvirt-domain.c:9662)
==234102== by 0x13F854: remoteDispatchDomainOpenConsole (remote_daemon_dispatch_stubs.h:9211)
==234102== by 0x13F72F: remoteDispatchDomainOpenConsoleHelper (remote_daemon_dispatch_stubs.h:9178)
==234102== by 0x4AB0685: virNetServerProgramDispatchCall (virnetserverprogram.c:430)
==234102== by 0x4AB01F0: virNetServerProgramDispatch (virnetserverprogram.c:302)
==234102== by 0x4AB700B: virNetServerProcessMsg (virnetserver.c:136)
==234102== by 0x4AB70CB: virNetServerHandleJob (virnetserver.c:153)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When resuming a domain from a save file, we read the domain XML
from the file, add it onto our internal list of domains, start
the qemu process, let it load the incoming migration stream and
resume its vCPUs afterwards. If anything goes wrong, the domain
object is removed from the list of domains and error is returned
to the caller. However, the qemu process might be left behind -
if resuming vCPUs fails (e.g. because qemu is unable to acquire
write lock on a disk) then due to a bug the qemu process is not
killed but the domain object is removed from the list.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1718707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since there is no guest agent in LXC world (yet), we can
implement _LEASE flag only.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We have to keep the default - querying the agent if no flag is
set.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There is a lots of possibilities to retrieve hostname information
from domain. Libvirt could use lease information from dnsmasq to
get current hostname too. QEMU supports QEMU-agent but it can use
lease source.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
As of systemd commit:
commit d65652f1f21a4b0c59711320f34266c635393c89
Author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
CommitDate: 2018-12-10 09:56:56 +0100
Partially unify hostname_is_valid() and dns_name_is_valid()
Dashes are no longer allowed at the end of machine names.
Trim the trailing dashes from the generated name before passing
it to machined.
https://bugzilla.redhat.com/show_bug.cgi?id=1790409
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A new helper for trimming combinations of specified characters from
the tail of the buffer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This leaks the FD of BPF map which means it will not be freed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
libvirt currently always reports that USB is available as a bus subsystem
type when running "virsh domcapabilities". However, this is not always
true, for example the qemu-system-s390x binary normally never has support
for USB. Thus we should only report that USB is available if there is
also a USB host controller available where we can attach USB devices.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1759849
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When trying to specify an input device on s390x without bus like this:
<input type='keyboard'/>
... then libvirt currently complains:
error: unsupported configuration: USB is disabled for this domain,
but USB devices are present in the domain XML
This is somewhat confusing since the user did not specify an USB
device here. Since USB is not available on s390x, we should default
to the "virtio" bus here instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1790189
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In v5.0.0-rc1~94 we switched from one huge switch() to an array
for translating error numbers into error messages. However, the
array is declared to have VIR_ERR_NUMBER_LAST items which makes
it impossible to spot this place by compile checking when adding
new error number.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Mention the knowledge base article which has tips how to fix the backing
chain to work with current libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Internal snapshots of a non-running domain do not carry any memory state
and restoring such a snapshot will not replace existing saved memory
state. This allows a scenario, where a user first suspends a domain into
managedsave, restores a non-running snapshot and then resumes the domain
from managedsave. After that, the guest system will run with its
previous memory state atop a different disk state. The most obvious
possible fallout from this is extensive file system corruption. Swap
content and RAID bitmaps might also be off.
This has been discussed[1] and fixed[2] from the end-user perspective for
virt-manager.
This patch marks the restore operation as risky at the libvirt level,
requiring the user to remove the saved memory state first or force the
operation.
[1] https://www.redhat.com/archives/virt-tools-list/2019-November/msg00011.html
[2] https://www.redhat.com/archives/virt-tools-list/2019-December/msg00049.html
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v5.10.0-290-g3a4787a301 refactored qemuDomainGetHostdevPath to
return a single path rather than an array of paths. When the function is
called on a missing device, it will now return NULL in @path rather than
a NULL array with zero items and the callers need to be adapted
properly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
bhyveargv2xmlmock calls virBhyveCapsBuild which in turn
calls virCPUProbeHost, probing the real host CPU. This
causes a test failure if the host CPU happens to contain
the 'arch-capabilities' feature as it triggers a call
to virHostCPUGetMSR() which fails on FreeBSD.
Fortunately we already have convenient code for mocking
the host CPU probing.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v5.10.0-508-gfbf3f3d86a, the 'error' label was removed from
bhyveParseBhyveCommandLine(), however the CONSUME_ARG() macro
still uses it. Fix the macro to return an error instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
src/qemu/qemu_domain_address.c:680:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
switch ((virDomainFSModel) dev->data.fs->model) {
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f363af7e351c6cac0ff442390d0dab283cbd9fae
Commit v5.10.0-522-g9000b2f298 was too aggressive and removed the
'error' label from prlsdkRemoveBootDevices() even though it's
used. Luckily, it's used only from one place and we have an
alternative for it that doesn't require the label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The point of this function is to translate virDomainOsDefFirmware
enum to qemuFirmwareOSInterface enum. However, with my commit
v5.10.0-507-g8e1804f9f6 we are passing a variable type of
virDomainLoader enum. Make the function accept both enums and
make the enum members correspond to each other.
This fixes clang build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split the formatting by fsdriver type to allow adding a new type.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Split the switch by fsdriver type to allow adding a new one.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the allocation and disposal of private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an object to hold the private data and call the
allocation function if it's present in xmlopt.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will be needed in the future for allocating private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the 'gluster' part and decouple the return from
the gluster_debug_level parsing to allow adding more options
to this section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Inactive VM doesn't have qemuCaps set thus we'd never properly report
that VM backups are supported only for running VMs.
Move the capability check after the active check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is not strictly needed, but it makes sure we initialize the
@bootTime global variable. Thing is, in order to validate XATTRs
and prune those set in some previous runs of the host, a
timestamp is recorded in XATTRs. The host boot time was unique
enough so it was chosen as the timestamp value. And to avoid
querying and parsing /proc/uptime every time, the query function
does that only once and stores the boot time in a global
variable. However, the only time the query function is called is
in a child process that does lock files and changes seclabels. So
effectively, we are doing exactly what we wanted to prevent from
happening.
The fix is simple, call the virHostBootTimeInit() function which
sets the global variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The idea is to offer callers an init function that they can call
independently to ensure that the global variables get
initialized.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
After one of previous commits (v5.10.0-524-gce56408e5f) there is
a variable left unused in verify_xpath_context() which breaks the
build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>