Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
* .gnulib: Update, for sc_prohibit_strcmp fix.
* cfg.mk: Adjust copyright; the only FSF portions come from when
this file was copied from coreutils.
(sc_prohibit_strncmp): Copy bug-fixes from sc_prohibit_strcmp.
* .x-sc_prohibit_strcmp: Delete, now that rule is smarter.
* .x-sc_prohibit_strncmp: Likewise.
* Makefile.am (syntax_check_exceptions): Track deletion.
virLibConnError already includes __FUNCTION__ in its output, so we
were redundant. Furthermore, clang warns that __FUNCTION__ is not
a string literal (at least __FUNCTION__ will never contain %, so
it was not a security risk).
* src/datatypes.c: Replace __FUNCTION__ with a descriptive string.
This is in response to a request in:
https://bugzilla.redhat.com/show_bug.cgi?id=665293
In short, under heavy load, it's possible for qemu's networking to
lock up due to the tap device's default 1MB sndbuf being
inadequate. adding "sndbuf=0" to the qemu commandline -netdevice
option will alleviate this problem (sndbuf=0 actually sets it to
0xffffffff).
Because we must be able to explicitly specify "0" as a value, the
standard practice of "0 means not specified" won't work here. Instead,
virDomainNetDef also has a sndbuf_specified, which defaults to 0, but
is set to 1 if some value was given.
The sndbuf value is put inside a <tune> element of each <interface> in
the domain. The intent is that further tunable settings will also be
placed inside this element.
<interface type='network'>
...
<tune>
<sndbuf>0</sndbuf>
...
</tune>
</interface>
This patch is in response to
https://bugzilla.redhat.com/show_bug.cgi?id=643050
The existing libvirt support for the vhost-net backend to the virtio
network driver happens automatically - if the vhost-net device is
available, it is always enabled, otherwise the standard userland
virtio backend is used.
This patch makes it possible to force whether or not vhost-net is used
with a bit of XML. Adding a <driver> element to the interface XML, eg:
<interface type="network">
<model type="virtio"/>
<driver name="vhost"/>
will force use of vhost-net (if it's not available, the domain will
fail to start). if driver name="qemu", vhost-net will not be used even
if it is available.
If there is no <driver name='xxx'/> in the config, libvirt will revert
to the pre-existing automatic behavior - use vhost-net if it's
available, and userland backend if vhost-net isn't available.
We try to use that command first when setting a VNC/SPICE password. If
that doesn't work we fallback to the legacy VNC only password
Allow an expiry time to be set, if that doesn't work, throw an error
if they try to use SPICE.
Change since v1:
- moved qemuInitGraphicsPasswords to qemu_hotplug, renamed
to qemuDomainChangeGraphicsPasswords.
- updated what looks like a typo (that appears to work anyway) in
initial patch from Daniel:
- ret = qemuInitGraphicsPasswords(driver, vm,
- VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
- &vm->def->graphics[0]->data.vnc.auth,
- driver->vncPassword);
+ ret = qemuInitGraphicsPasswords(driver, vm,
+ VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
+ &vm->def->graphics[0]->data.spice.auth,
+ driver->spicePassword);
Based on patch by Daniel P. Berrange <berrange@redhat.com>.
I broke 'make check' with commit 04197350 by unconditionally
emitting 'hap=' in xen xm driver. Only emit 'hap=' if
xendConfigVersion >= 3. I've tested sending 'hap=' to a Xen 3.2
machine without support for hap setting and verified that xend
silently drops the unrecognized setting.
* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New
prototype.
* src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs)
Rename and split...
(qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it
easier to add and test device-specific checks.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of
device-related flags.
(mymain): Update expected flags.
* tests/qemuhelpdata/qemu-0.12.1-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.
It was awkward having only int conversion in the virStrToLong family,
but only long conversion in the virXPath family. Make both families
support both types.
* src/util/util.h (virStrToLong_l, virStrToLong_ul): New
prototypes.
* src/util/xml.h (virXPathInt, virXPathUInt): Likewise.
* src/util/util.c (virStrToLong_l, virStrToLong_ul): New
functions.
* src/util/xml.c (virXPathInt, virXPathUInt): Likewise.
* src/libvirt_private.syms (util.h, xml.h): Export them.
* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes)
(qemuCapsProbeCPUModels, qemuCapsParsePCIDeviceStrs)
(qemuCapsExtractVersionInfo): Use virCommand rather than virExec.
xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging. If disabled,
software techniques such as shadow page tables are used. If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.
Xen does not provide a mechanism to discover the HAP capability, so
we advertise its availability for hvm guests on Xen >= 3.3.
xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging. If disabled,
software techniques such as shadow page tables are used. If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.
This provides implementation for mapping HAP setting to/from
domxml/native formats in xen drivers.
Extend the virDomainFeature enumeration to include HAP (hardware
assisted paging) feature.
Hardware features such as Extended Page Table and Nested Page
Table augment hypervisor software techniques such as shadow
page table. Adding HAP to the virDomainFeature enumeration
allows users to select between hardware and software memory
management mechanisms for their guests.
Commit 870dba0 (Mar 2008) added builddir/src to PATH to pick
up virsh. Later, virsh was moved to tools; commit db68d6b
(Oct 2009) noticed this, but only added the new location rather
than deleting the old location.
* tests/Makefile.am (path_add): Drop now-useless directory.
Suggested by Daniel P. Berrange.
Without this patch, at least tests/daemon-conf (which sticks
$builddir/src in the PATH) tries to execute the directory
$builddir/src/qemu rather than a real qemu binary.
* src/util/util.h (virFileExists): Adjust prototype.
(virFileIsExecutable): New prototype.
* src/util/util.c (virFindFileInPath): Reject non-executables and
directories. Avoid huge stack allocation.
(virFileExists): Use lighter-weight syscall.
(virFileIsExecutable): New function.
* src/libvirt_private.syms (util.h): Export new function.
When we do peer2peer migration, the dest uri is an address of the
target host as seen from the source machine. So we must specify
the ip or hostname of target host in dest uri. If we do not specify
it, report an error to the user.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
If the emulator doesn't support SDL graphic, we should reject
the use of SDL graphic xml with error messages, but not ignore
it silently, and pretend things are fine.
"-sdl" flag was exposed explicitly by qemu since 0.10.0, more detail:
http://www.redhat.com/archives/libvir-list/2011-January/msg00442.html
And we already have capability flag "QEMUD_CMD_FLAG_0_10", which
could be used to prevent the patch affecting the older versions
of QEMU.
* src/qemu/qemu_command.c
Don't report an error when the VirtualBox registry key is missing,
as this just indicates that VirtualBox is not installed in general.
This matches the behavior of the XPCOM glue that silently ignores
a missing VBoxXPCOMC.so.
Skip IB700 when assigning PCI slots.
Note: the I6300ESB watchdog _is_ a PCI device.
To test this: I applied this patch to libvirt-0.8.3-2.fc14 (rebasing
it slightly: qemu_command.c didn't exist in that version) and
installed this on my machine, then tested that I could successfully
add an ib700 watchdog device to a guest, start the guest, and the
ib700 was available to the guest. I also added an i6300esb (PCI)
watchdog to another guest, and verified that libvirt assigned a PCI
device to it, that the guest could be started, and that i6300esb was
present in the guest.
Note that if you previously had a domain with a ib700 watchdog, it
would have had an <address type='pci' .../> clause added to it in the
libvirt configuration. This patch does not attempt to remove this.
You cannot start such a domain -- qemu gives an error if you try.
With this patch you are able to remove the bogus address element
without libvirt adding it back.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
* src/util/network.c (virSocketAddrMask): Zero out port, so that
iptables can initialize just the netmask then call
virSocketFormatAddr without an uninitialized read in getnameinfo.
On Fedore 14, virt-manager spews a bunch of warnings to the console:
/usr/lib64/python2.7/site-packages/libvirt.py:1781: PendingDeprecationWarning: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Have libvirt use the capsule API if available. I've verified this compiles
fine on older python (2.6 in RHEL6 which doesn't have capsules), and
virt-manager seems to function fine.
After the remote driver runs an event callback, it unconditionally disables the
loop timer, thinking it just flushed every queued event. This doesn't work
correctly though if an event is queued while a callback is running.
The events actually aren't being lost, it's just that the event loop didn't
think there was anything that needed to be dispatched. So all those 'lost
events' should actually get re-triggered if you manually kick the loop by
generating a new event (like creating a new guest).
The solution is to disable the dispatch timer _before_ we invoke any event
callbacks. Events queued while a callback is running will properly reenable the
timer.
More info at https://bugzilla.redhat.com/show_bug.cgi?id=624252
The current security driver usage requires horrible code like
if (driver->securityDriver &&
driver->securityDriver->domainSetSecurityHostdevLabel &&
driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
This pair of checks for NULL clutters up the code, making the driver
calls 2 lines longer than they really need to be. The goal of the
patchset is to change the calling convention to simply
if (virSecurityManagerSetHostdevLabel(driver->securityDriver,
vm, hostdev) < 0)
The first check for 'driver->securityDriver' being NULL is removed
by introducing a 'no op' security driver that will always be present
if no real driver is enabled. This guarentees driver->securityDriver
!= NULL.
The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel'
being non-NULL is hidden in a new abstraction called virSecurityManager.
This separates the driver callbacks, from main internal API. The addition
of a virSecurityManager object, that is separate from the virSecurityDriver
struct also allows for security drivers to carry state / configuration
information directly. Thus the DAC/Stack drivers from src/qemu which
used to pull config from 'struct qemud_driver' can now be moved into
the 'src/security' directory and store their config directly.
* src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to
use new virSecurityManager APIs
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h
src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h:
Move into src/security directory
* src/security/security_stack.c, src/security/security_stack.h,
src/security/security_dac.c, src/security/security_dac.h: Generic
versions of previous QEMU specific drivers
* src/security/security_apparmor.c, src/security/security_apparmor.h,
src/security/security_driver.c, src/security/security_driver.h,
src/security/security_selinux.c, src/security/security_selinux.h:
Update to take virSecurityManagerPtr object as the first param
in all callbacks
* src/security/security_nop.c, src/security/security_nop.h: Stub
implementation of all security driver APIs.
* src/security/security_manager.h, src/security/security_manager.c:
New internal API for invoking security drivers
* src/libvirt.c: Add missing debug for security APIs
If invalid type is specified, e.g.
<serial type='foo'>
<target port='0'/>
</serial>
We replace 'foo' with "null" type implicitly, without reporting an
error message to tell the user, and "start" or "edit" the domain
will be success.
It's not good to guess what the user wants, This patch is to fix
the problem.
* src/conf/domain_conf.c
Setting unix_sock_group to something else than default "root" in
/etc/libvirt/libvirtd.conf prevents system libvirtd from dumping core on
crash. This is because we used setgid(unix_sock_group) before binding to
/var/run/libvirt/libvirt-sock* and setgid() back to original group.
However, if a process changes its effective or filesystem group ID, it
will be forbidden from leaving core dumps unless fs.suid_dumpable sysctl
is set to something else then 0 (and it is 0 by default).
Changing socket's group ownership after bind works better. And we can do
so without introducing a race condition since we loosen access rights by
changing the group from root to something else.
This avoids throwing the tests off if LD_LIBRARY_PATH or LD_PRELOAD or
other variables are set.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com>
