Both <encryption> and <diskSourceCommon> were absent from the <source>
element defined in domainsnapshot.rng
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is the only instance of g_autofree change applicable for
qemu_checkpoint.c
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When the comment in libvirtd.sasl was last updated with
commit fe772f24a6
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 20 14:10:03 2012 -0400
daemon: Avoid 'Could not find keytab file' in syslog
it was noted that only old versions of kerberos would need the
environment variable to be set: that was more than seven years
ago, so it's safe to assume that none of our current target
platforms still requires that hack and setting the appropriate
key in the configuration file will be enough.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirtd supports this feature, and virtqemud ultimately calls to
the same code so it does as well: advertise it in the sysconf file
for the latter, as is already the case for the former.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using systemd we want to take advantage of socket activation
instead of keeping daemons running all the time, so we default to
shutting them down after two minutes of inactivity.
At the same time, we want it to be possible for the admin to opt
out of this behavior and disable timeouts entirely. A very natural
way to do so would be to specify a zero-length timeout, but that's
currently not accepted by the command line parser. Address that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When redefining checkpoints from scratch we'd not set the 'current'
checkpoint if there wasn't any. This meant that the code wasn't ever
able to set a 'current' checkpoint as any other one looks up if the
parent of the redefined checkpoint is current.
Since the backup code then requires the current checkpoint to start the
lookup we'd not be able to perform a backup after restoring the
checkpoint hierarchy.
Reported-by: Eyal Shenitzky <eshenitz@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Skip the liveness and capability checks when redefining checkpoints as
we don't need qemu interactions to update the metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that v5.0.0-rc1 was tagged, update the capabilities to make sure
that everything works as expected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU uses the 'devname' string in the QAPI schema so a bump would
trigger this check. Exempt all of the capabilities data from the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU now formalized the arguments of netdev-add in the schema, so we
must use a real type to pass the schema validation once the schema is
updated.
The 'user' variant doesn't have any other mandatory fields.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to squeeze the validator output into the monitor reply message
doesn't make sense and doesn't work well as it's not well formed JSON:
54) qemuMonitorJSONAddNetdev ... libvirt: error : internal error: cannot parse json { "error": { "desc": "failed to validate arguments of 'netdev_add' against QAPI schema: {
ERROR: variant 'test' for discriminator 'type' not found
", "class": "UnexpectedCommand" } }: lexical error: invalid character inside string.
ev_add' against QAPI schema: { ERROR: variant 'test' for
(right here) ------^
FAILED
Output it to stderr if requested and just note that schema validation
failed in the error message:
54) qemuMonitorJSONAddNetdev ...
failed to validate arguments of 'netdev_add' against QAPI schema
args:
{
"id": "net0",
"type": "test"
}
validator output:
{
ERROR: variant 'test' for discriminator 'type' not found
libvirt: QEMU Driver error : internal error: unable to execute QEMU command 'netdev_add': failed to validate arguments of 'netdev_add' against QAPI schema (to see debug output use VIR_TEST_DEBUG=2)
FAILED
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test name is concatenated from a prefix with the test name, but no
space was added so the output looked wrong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a comment noting that job update can cause the pointer to be invalid
and thus should not be accessed after.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
No callers use it any more. Additionally if qemuBlockJobUpdate was
called with the last reference of the job e.g. in
qemuBlockJobRefreshJobs, the reading of the job state would happen from
freed memory.
Reported-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStorageFileSupportsSecurityDriver ends up initializing the storage
file backend which after the recent changes to the daemon architecture
may end up dlopening of the backend modules.
Since this is required only for remote storage we can optimize the call
by moving the check whether the backend is supported to the branch which
deals with remote storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Treat the shortcut for chowning local files as a stand-alone section
by returning success from it and refactor the rest so that the cleanup
section is inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The same timeout as libvirtd can't be used for virtlogd: even with
socket activation in place, any message produced by QEMU on its
standard output/error between when virtlogd quits due to the timeout
and when it's started again due to socket activation will get lost.
This reverts commit 02b6005063
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 2ace7a87a8 introduced a logic bug by an improperly
modified condition where we'd skip to the else branch when reusing of
external images was requested and blockdev is available.
The original intentions were to skip the backing store update with
blockdev.
Fix it by only asserting the boolean which was used to track whether we
support update of the backing store only when blockdev is not present
along with the appropriate rename.
https://bugzilla.redhat.com/show_bug.cgi?id=1820016
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When moving the formatting of this attributes from -drive
to -device, the QEMU_CAPS_USB_STORAGE_WERROR capability
was used, because usb-storage was the last device to gain
this capability.
However this lead to the assumption that QEMU binaries
without the usb-storage device do not support this,
leading to breakage on s390x with blockdev.
Fixes: bb4f3543bbhttps://bugzilla.redhat.com/show_bug.cgi?id=1819250
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To demonstrate the move of these attributes from -drive to -device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The Fedora rawhide job started failing with the latest container build.
Since we now have broad CI coverage on GitLab CI, there's not a strong
reason to continue using Travis for Linux jobs. Deleting the redundant
jobs is a better use of time than trying to debug the failure.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In previous commit:
commit e6afacb0fe
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Feb 12 12:26:11 2020 +0000
qemu: start/stop an event loop thread for domains
A bogus comment was added claiming we didn't need to shutdown the
event thread in the qemuProcessStop method, because this would be
done in the monitor EOF callback. This was wrong because the EOF
callback only runs in the case of a QEMU crash or a guest initiated
clean shutdown & poweroff. In the case where the libvirt admin
calls virDomainDestroy, the EOF callback never fires because we
have already unregistered the event callbacks. We must thus always
attempt to stop the event thread in qemuProcessStop.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the storage source has the query part set, format it in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
http, https, ftp, ftps, and tftp were not mentioned in the
documentation. Note that 'ssh' is still omitted as it's used only
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are refreshing the relative paths when doing the blockjobs we
no longer need to load them upfront when doing the snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preservation of the relative relationship requires us to load the
backing store strings from the disk images. With blockdev we stopped
detecting the backing chain if it's specified in the XML so the relative
links were not loaded at that point. To preserve the functionality from
the pre-blockdev without accessing the backing chain unnecessarily
during VM startup we must refresh the relative links when relative
block commit or block pull is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=1818655
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it is impossible for VIR_ALLOC() to return an error, we
should be consistent with the rest of the code and not continue
initializing the virSecurityDeviceLabelDef structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even with GLib it is still possible for virQEMUCapsNew() to
return NULL because it calls virQEMUCapsInitialize() which is a
wrapper over pthread_once() which may fail. At least, we still
check for its retval. If it so happens that the virQEMUCapsNew()
fails and returns NULL, we should not dereference it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The documentation could confuse people to expect that CPU models with
usable='no' attribute are not usable at all on the current host. But
they cannot be only used without explicitly disabling some features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new template provides a standardized place where environment
variables which are not static, but rather depend on the output of
some shell command, can be defined for later use. This pattern is
already used in libosinfo's GitLab CI integration.
Defining $MAKEFLAGS there means we don't need to call getconf over
and over, and the actual build steps don't end up drowned in the
noise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The last usage of plain fork() was removed in v0.9.7-rc1~50, but
we forgot to update the syntax-check exemption list accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
