Commit Graph

572 Commits

Author SHA1 Message Date
Srivatsa S. Bhat
34401a8b42 Add virsh command to initiate suspend on the host
Add a new command 'nodesuspend' to perform a timed suspend on the host.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
2011-11-29 17:29:17 +08:00
Michal Privoznik
2d0fc93fdd virsh: Don't traverse childless nodes in vshNodeIsSuperset
If both nodes do not have any children, we pass zero to
virBitmapAlloc which returns NULL. In turn we report OOM error
and return false (meaning nodes are different). This is not true.
2011-11-28 18:17:14 +01:00
Jiri Denemark
fd7e85ac6a virsh: Always run event loop
Since virsh already implements event loop, it has to also run it. So far
the event loop was only running during virsh console command.
2011-11-24 11:44:08 +01:00
Michal Prívozník
ea7182c29f virsh: Increase device-detach intelligence
Up to now users have to give a full XML description on input when
device-detaching. If they omitted something it lead to unclear
error messages (like generated MAC wasn't found, etc.).
With this patch users can specify only those information which
specify one device sufficiently precise. Remaining information is
completed from domain.
2011-11-23 10:24:43 +01:00
Laine Stump
1ae8eed1b4 virsh: add iface-bridge and iface-unbridge commands
One of the top questions by libvirt users is how to create a host
bridge device so that guests can be directly on the physical
network. There are several example documents that explain how to do
this manually, but following them often results in confusion and
failure. virt-manager does a good job of creating a bridge based on an
existing network device, but not everyone wants to use virt-manager.

This patch adds a new command, iface-bridge that makes it just about
as simple as possible to create a new bridge device based on an
existing ethernet/vlan/bond device (including associating IP
configuration with the bridge rather than the now-attached device),
and start that new bridge up ready for action, eg:

    virsh iface-bridge eth0 br0

For symmetry's sake, it also adds a command to remove a device from a
bridge, restoring the IP config to the now-unattached device:

    virsh iface-unbridge br0

(I had a short debate about whether to do "iface-unbridge eth0"
instead, but that would involve searching through all bridge devices
for the one that contained eth0, which seems like a bit too much
trouble).

NOTE: These two commands require that the netcf library be available
on the host. Hopefully this will provide some extra incentive for
people using suse, debian, ubuntu, and other similar systems to polish
up (and push downstream) the ports to those distros recently pushed to
the upstream netcf repo by Dan Berrange. Anyone interested in helping
with that effort in any way should join the netcf-devel mailing list
(subscription info at
https://fedorahosted.org/mailman/listinfo/netcf-devel)

During creation of the bridge, it's possible to specify whether or not
the STP protocol should be started up on the bridge and, if so, how
many seconds the bridge should squelch traffic from newly added
devices while learning new topology (defaults are stp='on' and
delay='0', which seems to usually work best for bridges used in the
context of libvirt guests).

There is also an option to not immediately start the bridge (and a
similar option to not immediately start the un-attached device after
destroying the bridge. Default is to start the new device, because in
the case of iface-unbridge not starting is strongly discouraged as it
will leave the system with no network connectivity on that interface
(because it's necessary to destroy/undefine the bridge device before
the unattached device can be defined), and it seemed better to make
the option for iface-bridge behave consistently.

NOTE TO THOSE TRYING THESE COMMANDS FOR THE FIRST TIME: to guard
against any "unexpected" change to configuration, it is advisable to
issue an "virsh iface-begin" command before starting any interface
config changes, and "virsh iface-commit" only after you've verified
that everything is working as you expect. If something goes wrong,
you can always run "virsh iface-rollback" or reboot the system (which
should automatically do iface-rollback).

Aside from adding the code for these two functions, and the two
entries into the command table, the only other change to virsh.c was
to add the option name to vshCommandOptInterfaceBy(), because the
iface-unbridge command names its interface option as "bridge".

virsh.pod has also been updated with short descriptions of these two
new commands.
2011-11-16 15:56:45 -05:00
Daniel P. Berrange
d3406045fd Split src/util/network.{c,h} into 5 pieces
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines

 - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
 - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
 - src/util/virsocketaddr.c: virSocketAddr and APIs
 - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
   for virNetDevBandwidth
 - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
   for virNetDevVPortProfile

* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
  src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
  src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
  src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
  src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
  src/conf/domain_conf.h, src/conf/network_conf.c,
  src/conf/network_conf.h, src/conf/nwfilter_conf.h,
  src/esx/esx_util.h, src/network/bridge_driver.c,
  src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
  src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
  src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
  src/util/virnetdev.h, src/util/virnetdevtap.c,
  tools/virsh.c: Update include files
2011-11-15 10:27:54 +00:00
Daniel P. Berrange
0eee075dc7 Adjust naming of network device bandwidth management APIs
Rename virBandwidth to virNetDevBandwidth, and virRate to
virNetDevBandwidthRate.

* src/util/network.c, src/util/network.h: Rename bandwidth
  structs and APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/conf/network_conf.c, src/conf/network_conf.h,
  src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/util/macvtap.c,
  src/util/macvtap.h, tools/virsh.c: Update for API changes.
2011-11-09 17:10:28 +00:00
Xu He Jie
2d764cb472 virsh: Add VSH_OFLAG_EMPTY_OK for attach-disk command
As the description of removing CDROM media from
  http://wiki.libvirt.org/page/QEMUSwitchToLibvirt#eject_DEV

Add flag 'VSH_OFLAG_EMPTY_OK' to the option 'source' of attach-disk

Then avoid outputting <source> in the XML if 'source' was empty,
rather than trusting libvirt domain_conf.c to understand an empty
string.

Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-08 16:04:56 -07:00
Ryota Ozaki
6b5c9936ec virsh: Fix error message on vol-create-from failure
If vol-create-from is failed due to 'input volume not found',
virsh outputs like this:
  $ sudo virsh vol-create-from testpool test-vol.xml test.img
  error: failed to get vol 'test.img', specifying --pool might help
  error: Storage volume not found: no storage vol with matching path
However, '--pool' is incorrect because it is already specified as
second argument ('testpool' in this case). It should be "--inputpool".

The patch fixes this by using pooloptname, which will be "inputpool"
in this case and "pool" in other cases, as error message.
2011-10-27 21:28:22 -06:00
Ryota Ozaki
9981fc5828 virsh: Fix vol-info's 'Type' output
We have a new vol type "dir" in addition to "file" and "block", but
virsh doesn't know it. Fix it.

Additionally, the patch lets virsh output "unknown" if not matched
any of them.
2011-10-24 09:44:25 +08:00
Hu Tao
7b2723c5c1 support setting bandwidth from virsh attach-interface
Adds two options, inbound and outbound, to attach-interface to set
bandwidth when attaching interfaces
2011-10-20 10:31:50 +02:00
Guido Günther
07862822f3 Use virBufferEscapeShell in cmdEcho 2011-10-19 09:24:02 +02:00
Michal Privoznik
4dadfe59d5 virDomainCoreDump: Introduce VIR_DUMP_RESET flag
This flag is intended to allow user to do so called system reset
after dump, instead of sending ACPI reboot event.
2011-10-13 09:32:27 +02:00
Eric Blake
8b6d1a2068 snapshot: add API for filtering by leaves
Counterpart to --roots.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_LEAVES):
New flag.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): Document it.
* tools/virsh.c (cmdSnapshotList): Expose it.
* tools/virsh.pod (snapshot-list): Document --leaves.
2011-10-12 16:03:19 -06:00
Eric Blake
b77b203cac snapshot: virsh shorthand for operating on current snap
Rather than having to do:

$ virsh snapshot-revert dom $(virsh snapshot-current dom --name)

I thought it would be nice to do:

$ virsh snapshot-revert dom --current

I didn't add 'virsh snapshot-dumpxml --current' since we already have
'virsh snapshot-current' for the same task.  snapshot-list accepted
a name but did not require it, and that remains the case, with
--current serving in place of that name.  For all other commands,
name used to be required, and can now be replaced by --current;
I intentionally made it so that omitting both --current and a name
is an error (having the absence of a name imply --current seems
just a bit too magic, so --current must be explicit).  I also had
to keep snapshot-edit backwards-compatible, as the only command
that already had a --current argument alongside a name, which still
works to both edit a named snapshot and make it current.

* tools/virsh.c (vshLookupSnapshot): New helper function.
(cmdSnapshotEdit, cmdSnapshotList, cmdSnapshotParent)
(cmdSnapshotDelete, cmdDomainSnapshotRevert): Use it, adding an
option where needed.
* tools/virsh.pod (snapshot-delete, snapshot-edit)
(snapshot-list, snapshot-parent, snapshot-revert): Document
use of --current.
(snapshot-dumpxml): Mention alternative.
2011-10-11 16:38:48 -06:00
Eric Blake
521cc44700 snapshot: virsh fallback for snapshot-list --descendants --from
Given a list of snapshots and their parents, finding all descendants
requires a hairy traversal.  This code is O(n^3); it could maybe be
made to scale O(n^2) with the use of a hash table, but that costs more
memory.  Hopefully there aren't too many people with a hierarchy
so large as to approach REMOTE_DOMAIN_SNAPSHOT_LIST_NAMES_MAX (1024).

* tools/virsh.c (cmdSnapshotList): Add final fallback.
2011-10-10 17:24:47 -06:00
Eric Blake
16d7b3908e snapshot: virsh fallback for snapshot-list --from children
Iterating over one level of children requires parsing all snapshots
and their parents; a bit of code shuffling makes it pretty easy
to do this as well.

* tools/virsh.c (cmdSnapshotList): Add another fallback.
2011-10-10 17:22:07 -06:00
Eric Blake
510823018e snapshot: virsh fallback for snapshot-list --tree --from
Emulating --from requires grabbing the entire list of snapshots
and their parents, and recursively iterating over the list from
the point of interest - but we already do that for --tree.  This
turns on emulation for that situation.

* tools/virsh.c (__vshControl): Rename member.
(vshReconnect, cmdConnect, vshGetSnapshotParent): Update clients.
(cmdSnapshotList): Add fallback.
2011-10-10 17:19:11 -06:00
Eric Blake
fe383bb541 snapshot: virsh snapshot-list and children
Sometimes, we only care about one branch of the snapshot hierarchy.
Make it easier to list a single branch, by using the new APIs.

Technically, I could emulate these new virsh options on old servers
by doing a complete dump, then scraping xml to filter out just the
snapshots that I care about, but I didn't want to do that in this patch.

* tools/virsh.c (cmdSnapshotList): Add --from, --descendants.
* tools/virsh.pod (snapshot-list): Document them.
2011-10-10 17:11:05 -06:00
Eric Blake
bab4f31c78 snapshot: avoid accidental renames with snapshot-edit
I was a bit surprised that 'virsh snapshot-edit dom name' silently
allowed me to clone things, while still telling me the old name,
especially since other commands like 'virsh edit dom' reject rename
attempts (*).  This fixes things to be more explicit (**).

(*) Technically, 'virsh edit dom' relies on virDomainDefineXML
behavior, which rejects attempts to mix a new name with existing
uuid or new uuid with existing name, but you can create a new
domain by changing both uuid and name.  On the other hand, while
snapshot-edit --clone is a true clone, creating a new domain
would also have to decide whether to clone snapshot metadata,
managed save, and any other secondary data related to the domain.
Domain renames are not trivial either.

(**) Renaming or creating a clone is still a risky proposition -
for offline snapshots and system checkpoints, if the new name
does not match an actual name recorded in the qcow2 internal
snapshots, then you cannot revert to the new checkpoint.  But it
is assumed that anyone using the new virsh flags knows what they
are doing, and can deal with the fallout caused by a rename/clone;
that is, we can't completely prevent a user from shooting
themselves in the foot, so much as we are making the default
action less risky.

* tools/virsh.c (cmdSnapshotEdit): Add --rename, --clone.
* tools/virsh.pod (snapshot-edit): Document them.
2011-10-10 11:56:05 -06:00
Eric Blake
40baa1c899 snapshot: sort snapshot-list --tree
Otherwise, the results are not repeatable.

* tools/virsh.c (cmdSnapshotList): Print tree in predictable order.
2011-10-10 11:12:43 -06:00
tangchen
d5c4067d7b virsh: Update the help information for undefine command.
virsh undefine command can now undefine an active guest, but the help information is still the old.
This patch modifies it and make it coincident to the manpage of virsh.

Signed-off-by: tangchen <tangchen@cn.fujitsu.com>
2011-10-07 09:55:30 -06:00
Eric Blake
731f9a5e56 snapshot: let virsh edit disk snapshots
It was impossible for 'virsh snapshot-current dom name' to set name
as the current snapshot, if name is a disk-only snapshot.

Using strstr rather than full-blown xml parsing is safe, since the
xml is assumed to be well-formed coming from libvirtd rather than
arbitrary text coming from the user.

* tools/virsh.c (cmdSnapshotCurrent, cmdSnapshotEdit): Pass
disk_only flag when redefining a disk snapshot.
2011-10-07 08:29:50 -06:00
Eric Blake
203b361f09 snapshot: fix virsh error message typo
* tools/virsh.c (cmdSnapshotList): Spell exclusive correctly.
2011-10-07 07:53:27 -06:00
Eric Blake
3c797404a5 snapshot: add REVERT_FORCE to API
Although reverting to a snapshot is a form of data loss, this is
normally expected.  However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play.  Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.

Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
2011-10-05 11:33:36 -06:00
Eric Blake
64703c03fc snapshot: better virsh handling of missing current, parent
Previously, virsh 'snapshot-parent' and 'snapshot-current' were
completely silent in the case where the code conclusively proved
there was no parent or current snapshot, but differed in exit
status; this silence caused some confusion on whether the commands
worked.  Furthermore, commit d1be48f introduced a regression where
snapshot-parent would leak output about an unknown function, but
only on the first attempt, when talking to an older server that
lacks virDomainSnapshotGetParent.  This changes things to consistenly
report an error message and exit with status 1 when no snapshot
exists, and to avoid leaking unknown function warnings when using
fallbacks.

* tools/virsh.c (vshGetSnapshotParent): Alter signature, to
distinguish between real error and missing parent.  Don't pollute
last_error on success.
(cmdSnapshotParent): Adjust caller.  Always output message on
failure.
(cmdSnapshotList): Adjust caller.
(cmdSnapshotCurrent): Always output message on failure.
2011-10-04 14:36:24 -06:00
Marc-André Lureau
41bf4e721e virsh: do not unlink NULL file
error:could not take a screenshot of xp
==6216== Syscall param unlink(pathname) points to unaddressable byte(s)
==6216==    at 0x373A0D4937: unlink (syscall-template.S:82)
==6216==    by 0x40FD73: cmdScreenshot (virsh.c:3070)
==6216==    by 0x42BA0D: vshCommandRun (virsh.c:14920)
==6216==    by 0x42EC97: main (virsh.c:16379)
==6216==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
==6216==
error:Requested operation is not valid: domain is not running
2011-09-30 19:22:06 -06:00
Xu He Jie
0ec9a8c2f2 virsh: Add 'reset' command for virsh
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
2011-09-29 07:04:14 -06:00
Eric Blake
1cf0e3db8b snapshot: add virsh snapshot-list --tree
Reuse the tree listing of nodedev-list, coupled with the new helper
function to efficiently grab snapshot parent names, to produce
tree output for a snapshot hierarchy.  For example:

$ virsh snapshot-list dom --tree
root1
 |
  +- sibling1
  +- sibling2
  |   |
  |   +- grandchild
  |
  +- sibling3

root2
 |
  +- child

* tools/virsh.c (cmdSnapshotList): Add --tree.
* tools/virsh.pod (snapshot-list): Document it.
2011-09-28 09:54:57 -06:00
Eric Blake
d1be48f976 snapshot: refactor virsh snapshot parent computation
Make parent computation reusable, using virDomainSnapshotGetParent
when possible.

* tools/virsh.c (vshGetSnapshotParent): New helper.
(cmdSnapshotParent): Use it.
2011-09-28 09:54:57 -06:00
Peter Krempa
b0889eae6a virsh: Allow using complete <capabilities> elements with cpu-baseline
This patch cleans the cpu baseline function using new libvirt helper
functions and fixes XPath expression that selects <cpu> elements from
the source file, that can contain concatenated <capabilities> XMLs,
domain XMLs and bare <cpu> elements. The fixed XPath expression ensures
not to select NUMA <cpu id=... elements.

This patch also removes vshRealloc function, that remained unused after
cleaning up cpu-baseline.

https://bugzilla.redhat.com/show_bug.cgi?id=731645
2011-09-28 09:17:56 +02:00
Peter Krempa
882e768ef0 virsh: Allow using domain and capabilities XMLs with cpu-compare
This patch adds extraction of the <cpu> element from capabilities and
domain definition XML documents to improve user experience.

https://bugzilla.redhat.com/show_bug.cgi?id=731151
2011-09-28 09:12:09 +02:00
Osier Yang
f858bcb2d6 virsh: Do not ignore the specified flags for cmdSaveImageDefine
Introduced by commit 42c52d53c, which added the support for new
flags, but forgot to update the API use to pass the flags.
2011-09-22 20:22:54 +08:00
Eric Blake
466f902446 virsh: fix regression in argv parsing
Prior to commit 85d2810, we had an issue where:

snapshot-create-as dom name --diskspec spec --diskspec spec

failed to parse the second spec, because the first spec had marked
that option as no longer requiring an argument.

In commit 85d2810, I fixed it by making argv options no longer mark
the option as seen.  But this in turn breaks mandatory argv options,
which now complain that the argv option is missing.

This patch reverts that part of 85d2810, and instead replaces it with
fixes to no longer clear opts_need_arg of an argv argument.

* tools/virsh.c (vshCmddefGetOption, vshCmddefGetData)
(vshCommandParse): Fix option parsing for required argv option.
(vshCmddefOptParse): Check that argv option is last.
* tests/virsh-optparse: Enhance test.
2011-09-22 13:28:18 +08:00
Osier Yang
2f0595244b virsh: More friendly err if no pool is specified for looking up a vol
There are 3 ways to lookup a volume, only virStorageVolLookupByName
needs pool object. So if no --pool is specified, it will tries to
get the volume via virStorageVolLookupByPath/virStorageVolLookupByKey.

But if all 3 ways fails, and no --pool is specified, a friendly
error might help the user get right way quickly.
2011-09-22 08:16:08 +08:00
Osier Yang
08c4de5984 virsh: Remove useless codes of cmdVolPath
Variable "name" is never used in the codes, it's useless.
2011-09-21 09:21:58 +08:00
Eric Blake
6d1c11e51c virsh: tweak previous domblkstat patch
Translators are likely to botch trailing spacing; by doing the
formatting outside of the translation, we can generally get
better alignment.  Also, for consistency, use 'bytes read' to
match 'bytes written'.

* tools/virsh.c (domblkstat_output): Drop trailing space. Tweak
rd_bytes output.
(cmdDomblkstat, DOMBLKSTAT_LEGACY_PRINT): Update formatting.
2011-09-19 17:54:05 -06:00
Peter Krempa
619077b9eb virsh: Add more human-friendly output of domblkstat command
Users of virsh complain that output of the domblkstat command
is not intuitive enough. This patch adds explanation of fields
returned by this command to the help section for domblkstat and
the man page of virsh. Also a switch --human is added for
domblkstat that prints the fields with more descriptive
texts.

This patch also changes sequence of the output fields and their
names back to the order and spelling established by previous
versions of virsh to maintain compatibility with scripts.

Example of ordered and "translated" output:

PRE-patch:

virsh # domblkstat 1 vda
vda wr_bytes 5170176
vda wr_operations 511
vda rd_bytes 82815488
vda rd_operations 3726

POST-patch:

virsh # domblkstat 1 vda
vda rd_req 3726
vda rd_bytes 82815488
vda wr_req 478
vda wr_bytes 4965376

Example of human readable output:

virsh # domblkstat 1 vda --human
Device: vda
 number of read operations:      3726
 number of read bytes:           82815488
 number of write operations:     478
 number of bytes written:        4965376

https://bugzilla.redhat.com/show_bug.cgi?id=731656
2011-09-19 14:24:08 -06:00
Jiri Denemark
d2d6776342 qemu: Introduce shutdown reason for paused state
Qemu sends STOP event as part of the shutdown process. Detect such STOP
event and consider shutdown to be reason of emitting such event. That's
the best we can do until qemu provides us the reason directly in STOP
event. This allows us to report shutdown reason for paused state so that
apps can detect domains that failed to finish the shutdown process
(e.g., because qemu is buggy and doesn't exit on SIGTERM or it is
blocked in flushing disk buffers).
2011-09-16 17:25:55 +02:00
Eric Blake
e9f55e4688 Revert "virsh: Use old API if remote libvirtd does not support new"
This reverts commit 799912fa05b8c3aa37bd04c57b196755f3f70552; now
that the rpc regression is fixed, virsh no longer needs the special
case here.
2011-09-16 08:20:32 -06:00
Eric Blake
85d2810823 snapshot: tweak snapshot-create-as diskspec docs
With this patch, it is hopefully a bit more obvious that for
snapshot-create-as, a literal '--diskspec' is mandatory if name
or description was omitted, but optional if all earlier options
were provided.

These all denote two diskspecs and a description:
virsh snapshot-create-as dom name desc vda vdb
virsh snapshot-create-as dom name desc --diskspec vda --diskspec vdb
virsh snapshot-create-as dom name desc --diskspec vda vdb
virsh snapshot-create-as dom name desc vda --diskspec vdb
virsh snapshot-create-as dom --diskspec vda --diskspec vdb name desc

This gives two diskspecs but no description:
virsh snapshot-create-as dom name --diskspec vda --diskspec vdb

And this treats 'vda' as the description, with only one diskspec:
virsh snapshot-create-as dom name vda vdb

The help output now shows:
    snapshot-create-as <domain> [<name>] [<description>] [--print-xml] [--no-metadata] [--halt] [--disk-only] [[--diskspec] <string>]...

I also checked the help output for echo and send-key, which are two
other variants of argv commands.

* tools/virsh.pod (snapshot-create-as): Document when a literal
--diskspec must preceed a diskspec argument.
* tools/virsh.c (vshCmddefHelp): Update help output for argv when
naming the option is useful.
(vshCmddefGetData): Fix logic on when argv was seen.
* tests/virsh-optparse: Add tests to avoid regressions.
2011-09-15 16:18:12 -06:00
Peter Krempa
b998f1f77c xml: Clean up rest of virtual XML document names for XML strings
Commit 498d783 cleans up some of virtual file names for parsing strings
in memory. This patch cleans up (hopefuly) the rest forgotten by the
first patch.

This patch also changes all of the previously modified "filenames" to
valid URI's replacing spaces for underscores.

Changes to v1:
- Replace all spaces for underscores, so that the strings form valid
  URI's
- Replace spaces in places changed by commit 498d783
2011-09-14 09:09:04 -06:00
Peter Krempa
799912fa05 virsh: Use old API if remote libvirtd does not support new
Commit ffe28ab74b introduced regression
while communicating with older libvirtd command 'domblkstat' used the new
API and did not check for VIR_ERR_RPC error code signalling the remote
server does not support this API and did not fall back to older API.
Thereafter 'domblkstat' ended with "error: unknown procedure: 243".
2011-09-13 16:55:04 -06:00
Peter Krempa
498d783387 xml: Change virtual file names of xml documents parsed in memory
While parsing XML strings from memory, the previous convention in
libvirt was to set the virtual file name to "domain.xml" or something
similar. This could potentialy trick the user into looking for a file
named domain.xml on the disk in an attempt to fix the error.

This patch changes these filenames to something that can't be as easily
confused for a valid filename.

Examples of error messages:
---------------------------
Error while loading file from disk:

15:07:59.015: 527: error : catchXMLError:709 : /path/to/domain.xml:1: StartTag: invalid element name
<domain type='kvm'><
--------------------^

Error while parsing definition in memory:

15:08:43.581: 525: error : catchXMLError:709 : (domain definition):2: error parsing attribute name
  <name>vm1</name>
--^
2011-09-08 17:20:33 +01:00
Eric Blake
a00c37f2f9 snapshot: use new API for less work
This has the added benefit of making 'snapshot-create dom --no-metadata'
now able to tell you the name of the just-generated snapshot.

* tools/virsh.c (vshSnapshotCreate, cmdSnapshotCurrent): Don't get
XML just for name.
2011-09-08 14:25:30 +01:00
Alex Jia
07331bba6d virsh: fix typo in opts_send_key
* tools/virsh.c: millseconds should be milliseconds in opts_send_key.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-09-08 11:11:09 +01:00
Matthias Bolte
a6e2ef732d mingw: Don't use interface as an identifier
Because it's a define used in MSCOM and its usage as
identifier results in a compile error.
2011-09-06 21:34:05 +02:00
Peter Krempa
dc675f3789 link-state: virsh: Add wrapper commands for changing link state
Two new commands are added to virsh that wrap usage of
virDomainUpdateDeviceFlags for changing link state of domain's network
interfaces. These wrappers extract network devices's xml configuration
and modify the link state for easy manipulation from an user's perspective.

 - domif-setlink - set link state of a domains virtual network interface
 - domif-getlink - get link state

* tools/virsh.c   - Add functionality to virsh
* tools/virsh.pod - Manpage documentation
2011-09-06 16:31:59 +08:00
Osier Yang
ffe28ab74b latency: Update virsh command domblkstat to use new API
The modified function fallbacks to use virDomainBlockStats if
virDomainBlockStatsFlags is not supported by the hypervisor driver.
If the new API is supported, it will be invoked instead of the
old API.
2011-09-06 12:03:05 +08:00
Eric Blake
35d52b56bb snapshot: wire up disk-only flag to snapshot-create
Expose the disk-only flag through virsh.  Additionally, make
virsh snapshot-create-as take an arbitrary number of diskspecs,
which can be used to build up the xml for <domainsnapshot>.

* tools/virsh.c (cmdSnapshotCreate): Add --disk-only.
(cmdSnapshotCreateAs): Likewise, and add argv diskspec.
(vshParseSnapshotDiskspec): New helper function.
(vshCmddefGetOption): Allow naming of argv field.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
them.
* tests/virsh-optparse: Test snapshot-create-as parsing.
2011-09-05 07:03:04 -06:00
Eric Blake
88a993b129 snapshot: add virsh domblklist command
This adds a convenience function to virsh that parses out block
information from the domain xml, making it much easier to see
what strings can be used in all other contexts that demand a
specific block name, especially when given the previous patch
that allows using either target or unique source name.

As an example on a domain with one disk and an empty cdrom drive:

Target     Source
-------------------------------------------
vda        /var/lib/libvirt/images/fedora_12.img
hdc        -

* tools/virsh.c (cmdDomblklist): New function.
* tools/virsh.pod (domblklist): Document it.
2011-09-05 07:03:04 -06:00
Eric Blake
5b30b08d66 snapshot: support extra state in snapshots
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
2011-09-05 07:03:04 -06:00
Eric Blake
a891ffa446 snapshot: expose halt-after-creation in virsh
Easy enough to emulate even with older servers.

* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add
--halt flag.
(vshSnapshotCreate): Emulate halt when flag is unsupported.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
2011-09-05 07:03:04 -06:00
Eric Blake
ddc882733a snapshot: expose new delete flag in virsh
It would technically be possible to have virsh compute the list
of descendants of a given snapshot, then delete those one at
a time.  But it's complex, and not worth writing for a first
cut at implementing the new flags.

* tools/virsh.c (cmdSnapshotDelete): Add --children-only,
--metadata.
* tools/virsh.pod (snapshot-delete): Document them.
2011-09-05 07:03:04 -06:00
Eric Blake
e88872e9a9 snapshot: teach virsh about new undefine flags
Similar to 'undefine --managed-save' (commit 83e849c1), we must
assume that the old API is unsafe; however, we cannot emulate
metadata-only deletion on older servers.  Additionally, we have
the wrinkle that while virDomainUndefineFlags and managed save
cleanup were introduced in 0.9.4, it wasn't until 0.9.5 that
snapshots block undefine of a domain.  Do the best we can given
the server we are talking to.

* tools/virsh.c (cmdUndefine): Add --snapshots-metadata flag.
* tools/virsh.pod (undefine, destroy, shutdown): Document effect
of snapshots.
2011-09-02 21:57:33 -06:00
Eric Blake
2b4d8deb6b snapshot: improve virsh snapshot-create, add snapshot-edit
Wire up the new snapshot creation flags in virsh.  For convenience,
teach 'snapshot-current' how to make an existing snapshot become
current (can be used after upgrading to newer libvirt to recover
from the fact that the older libvirt lost track of the current
snapshot after a restart).  The snapshot-create-as command is
intentionally not taught --redefine or --current, as this would
imply adding a lot of other options for everything else that can
appear in the <domainsnapshot> xml, but which is normally read-only.
Besides, redefining will usually be done on files created by
snapshot-dumpxml, rather than something built up by hand on the
command line.  And now that we can redefine, we can edit.

* tools/virsh.c (cmdSnapshotCreate): Add --redefine, --current,
and --no-metadata.
(cmdSnapshotCreateAs): Add --no-metadata.
(cmdSnapshotCurrent): Add snapshotname to alter current snapshot.
(cmdSnapshotEdit): New command.
* tools/virsh.pod (snapshot-create, snapshot-create-as)
(snapshot-current, snapshot-edit):  Document these.
2011-09-02 21:57:32 -06:00
Eric Blake
90ec08ed73 snapshot: refactor virsh snapshot creation
The next patch will make snapshot creation more complex, so it's
better to avoid repetition of the complexity.

* tools/virsh.c (vshSnapshotCreate): New helper function.
(cmdSnapshotCreate, cmdSnapshotCreateAs): Use it.
2011-09-02 17:44:45 -06:00
Eric Blake
22a833e789 snapshot: reflect new dumpxml and list options in virsh
New flag bits are worth exposing via virsh.  In the case of
snapshot-list --roots, it's possible to emulate this even when
talking to an older server that lacks the bit; whereas
--metadata requires a newer server.

Although we don't use --security-info yet, the flag is already
documented for other dumpxml operations, and turning it on now
will make it useful when a future patch actually has to honor it.

* tools/virsh.c (cmdSnapshotDumpXML, cmdSnapshotCurrent): Add
--security-info.
(cmdSnapshotList): Add --roots, --metadata.
* tools/virsh.pod (snapshot-dumpxml, snapshot-current)
(snapshot-list): Document these.
2011-09-02 17:07:36 -06:00
Eric Blake
d4a965c6a8 snapshot: add snapshot-list --parent to virsh
Even though I recently added 'virsh snapshot-parent', doing it one
snapshot at a time is painful, so make it possible to expand the
snapshot-list table at once.

* tools/virsh.c (cmdSnapshotList): Add --parent.
* tools/virsh.pod (snapshot-list): Document it.
2011-09-02 15:52:06 -06:00
Eric Blake
42c52d53c3 snapshot: expose --running and --paused in virsh
Pretty straight-forward exposure of new flags.  For most commands,
we let the API reject mutually exclusive flags; but for save-image-edit,
we do the sanity check ourselves to avoid looping on flag failure if
the edit cycle is ever enhanced to allow the user to retry an edit
to fix up an xml validation error.

* tools/virsh.c (cmdManagedSave, cmdRestore, cmdSave)
(cmdSaveImageDefine, cmdSaveImageEdit): Add new flags.
* tools/virsh.pod (managedsave, restore, save, save-image-define)
(save-image-edit): Document them.
2011-09-02 10:00:06 -06:00
Osier Yang
ddcd5674aa storage: Add virsh support for fs pool formating 2011-09-02 21:17:08 +08:00
Eric Blake
c2d4b4f704 virsh: improve send-key documentation
The 'virsh man' description of send-key was incomplete and used the
old style (literal 'optional name' instead of '[name]' metasyntax).
Meanwhile, none of the other virsh help texts include examples, so
I moved it out of virsh help and into the man page.

* tools/virsh.pod (send-key): Give better details.
* tools/virsh.c (info_send_key): Drop example from here.
2011-09-01 12:47:24 -06:00
Eric Blake
691ec08bac virsh: support 'virsh start --force-boot' on older servers
Managed save was added in 0.8.0, virDomainCreateWithFlags in 0.8.2,
and FORCE_BOOT in 0.9.5.  The virsh flag is more useful if we
emulate it for all older servers (note that if a hypervisor fails
the query for a managed save image, then it does not have one to
be removed, so the flag can be safely ignored).

* tools/virsh.c (cmdStart): Add emulation for new flag.
2011-09-01 12:42:48 -06:00
Alex Jia
59d4b170fc virsh: avoid memory leak on cmdVolCreateAs
* tools/virsh.c: fix memory leak on cmdVolCreateAs function.

* Detected in valgrind run:

==4746==
==4746== 48 (40 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 26 of 52
==4746==    at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==4746==    by 0x4C76E51: virAlloc (memory.c:101)
==4746==    by 0x4CD9418: virGetStoragePool (datatypes.c:592)
==4746==    by 0x4D21367: remoteStoragePoolLookupByName (remote_driver.c:4126)
==4746==    by 0x4CE42B0: virStoragePoolLookupByName (libvirt.c:10232)
==4746==    by 0x40C276: vshCommandOptPoolBy (virsh.c:13660)
==4746==    by 0x40CA37: cmdVolCreateAs (virsh.c:8094)
==4746==    by 0x412AF2: vshCommandRun (virsh.c:13770)
==4746==    by 0x422F11: main (virsh.c:15127)
==4746==
==4746== 1,011 bytes in 1 blocks are definitely lost in loss record 45 of 52
==4746==    at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==4746==    by 0x4A06167: realloc (vg_replace_malloc.c:525)
==4746==    by 0x4C76ECB: virReallocN (memory.c:161)
==4746==    by 0x4C60319: virBufferGrow (buf.c:72)
==4746==    by 0x4C606AA: virBufferAdd (buf.c:106)
==4746==    by 0x40CB37: cmdVolCreateAs (virsh.c:8118)
==4746==    by 0x412AF2: vshCommandRun (virsh.c:13770)
==4746==    by 0x422F11: main (virsh.c:15127)
==4746==
==4746== LEAK SUMMARY:
==4746==    definitely lost: 1,051 bytes in 2 blocks
==4746==    indirectly lost: 8 bytes in 1 blocks
==4746==      possibly lost: 0 bytes in 0 blocks
==4746==    still reachable: 390,767 bytes in 1,373 blocks
==4746==         suppressed: 0 bytes in 0 blocks

* How to reproduce?

% valgrind -v --leak-check=full virsh vol-create-as default foo.img 10M \
  --allocation 0 --format qcow2 --backing-vol bar.img

Notes: bar.img doesn't exist.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-09-01 12:41:00 -06:00
Jim Fehlig
1282bd80f7 virsh: Expose virDomainMigrateGetMaxSpeed API 2011-09-01 11:26:21 -06:00
Eric Blake
d1535e668a virsh: prefer unsigned flags
virsh had some leftover 'int flags', and even an 'int flag'
declaration, compared to our preferred style of 'unsigned int flags'.

* tools/virsh.c (cmdUndefine, cmdSave, cmdSaveImageDumpxml)
(cmdSaveImageEdit, cmdManagedSave, cmdRestore, cmdDump)
(cmdVcpuPin, cmdSetvcpus, cmdSetmem, cmdSetmaxmem, cmdDumpXML)
(cmdDomXMLFromNative, cmdDomXMLToNative, doMigrate)
(cmdInterfaceEdit, cmdInterfaceDumpXML, cmdEdit): Match coding
style for flags.
(struct vshComdOptDef): Rename field member.
(vshCmddefOptParse, vshCmddefHelp): Adjust clients.
2011-09-01 08:16:57 -06:00
Eric Blake
27c8526053 start: allow discarding managed save
There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things.  Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
2011-08-30 09:26:47 -06:00
Eric Blake
131540277e virsh: add list --managed-save
Knowing whether 'virsh start' will resume a saved image or do
a fresh boot is useful enough to expose via 'virsh list'.

Also, translate the state column.

* tools/virsh.c (cmdList): add --managed-save flag
* tools/virsh.pod (list): Document it.
Based on a suggestion by Miklos Vajna.
2011-08-24 08:34:49 -06:00
Osier Yang
fb6d616523 virsh: Substitute goto label out with cleanup
Introduced by 241cbc13a, pushed under urgent rule.
2011-08-23 22:22:51 +08:00
Osier Yang
241cbc13ac virsh: Do not try to free domain if it is NULL
Without these patch, there will be error like below if domain
is NULL.

error: invalid domain pointer in virDomainFree

Which is useless.
2011-08-23 21:42:22 +08:00
Osier Yang
dba7086fc3 virsh: Print error if specified bandwidth is invalid for blockjob
It's strange that the command fails but without any error if one
specifies as not a number.
2011-08-23 14:55:23 +08:00
Eric Blake
baac9c37d7 virsh: properly interleave shared stdout and stderr
Without this patch, invoking 'virsh >file 2>&1' results in
error messages appearing before normal output, even if they
occurred later in time than the normal output (since stderr
is unbuffered, but stdout waits until a full buffer).

* tools/virsh.c (print_job_progress, vshError): Flush between
stream transitions.
* tests/undefine: Test it.
2011-08-19 09:22:22 -06:00
Eric Blake
d89dd42d51 maint: simplify lots of libxml2 clients
Repetitive patterns should be factored.  The sign of a good
factorization is a change that kills 5x more lines than it adds :)

* src/conf/domain_conf.c (virDomainDeviceDefParse)
(virDomainSnapshotDefParseString): Use new convenience macros.
* src/conf/storage_conf.c (virStoragePoolDefParseSourceString):
Likewise.
* src/cpu/cpu.c (cpuCompareXML, cpuBaselineXML): Likewise.
* src/esx/esx_vi.c (esxVI_Context_Execute): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationCookieXMLParseStr):
Likewise.
* src/security/virt-aa-helper.c (caps_mockup): Likewise.
* src/test/test_driver.c (testOpenFromFile): Likewise.
* tests/cputest.c (cpuTestLoadXML, cpuTestLoadMultiXML):
Likewise.
* tools/virsh.c (cmdFreecell, makeCloneXML, cmdVNCDisplay)
(cmdTTYConsole, cmdDetachInterface, cmdDetachDisk)
(cmdSnapshotCreate, cmdSnapshotCreateAs, cmdSnapshotCurrent)
(cmdSnapshotList, cmdSnapshotParent): Likewise.
2011-08-19 09:13:55 -06:00
Eric Blake
e472fe25c7 maint: treat more libxml2 functions as free-like
* cfg.mk (useless_free_options): Add xmlFreeDoc, xmlBufferFree.
* src/esx/esx_vi.c (ESX_VI__TEMPLATE__FREE): Fix offenders.
* tools/virsh.c (cmdFreecell, cmdVNCDisplay, cmdTTYConsole)
(cmdDetachInterface, cmdDetachDisk, cmdSnapshotCreate)
(cmdSnapshotCreateAs, cmdSnapshotList, cmdSnapshotParent):
Likewise.
2011-08-19 09:13:54 -06:00
Eric Blake
531c858131 virsh: concatenate qemu-monitor-command arguments
Call me lazy, but:

virsh qemu-monitor-command dom --hmp info status

is nicer than:

virsh qemu-monitor-command dom --hmp 'info status'

* tools/virsh.c (cmdQemuMonitorCommand): Allow multiple arguments,
for convenience.
2011-08-17 07:45:32 -06:00
Eric Blake
cfbccb3821 virsh: tweak misleading wording
Fixes confusing docs introduced in commit 98369d3.

* tools/virsh.c (cmdSnapshotParent): Operates on named snapshot,
not current.
2011-08-16 17:22:41 -06:00
Eric Blake
e08adab31d virsh: fix dead store
Two copy-and-paste bugs in a row.  :(

* tools/virsh.c (cmdUndefine): Also avoid dead store.
2011-08-12 12:27:06 -06:00
Eric Blake
2cc1ad61c7 virsh: fix logic bug
Bug introduced in commit 9a0ec36.

* tools/virsh.c (cmdUndefine): Add missing line.
2011-08-12 11:39:35 -06:00
Eric Blake
9a0ec36346 virsh: don't reject undefine on active domain
The public API documents that undefine may be used to transition a
running persistent domain into a transient one.  Many drivers still
do not support this usage, but virsh shouldn't be getting in the
way of those that do support it.

This also drops a redundant conditional; vshCommandOptString
guaranteed that name was non-NULL.

* tools/virsh.c (cmdUndefine): Allow undefine on active domains;
the drivers may still reject it, but it is a valid API usage.
* tests/undefine (error): Fix the test to match.
2011-08-12 07:39:25 -06:00
Peter Krempa
594f564c75 virsh: Add dir type for listing volumes with vol-list
Fix of output of detailed volume list. BZ #727088
2011-08-11 13:39:20 -06:00
Eric Blake
98369d314b virsh: add snapshot-parent
Down the road, I want to add virDomainSnapshotGetParent, and use
the new API rather than xml scraping; but this virsh command can
be implemented even without the new API.

* tools/virsh.c (cmdSnapshotParent): New command.
* tools/virsh.pod (snapshot-parent): Document it.
2011-08-11 13:18:24 -06:00
Eric Blake
23b4a3f95b virsh: add virsh snapshot-current --name
Sometimes, full XML is too much; since most snapshot commands
operate on a snapshot name, there should be an easy way to get
at the current snapshot's name.  For example:

virsh snapshot-revert dom `virsh snapshot-current dom --name`

* tools/virsh.c (cmdSnapshotCurrent): Add an option.
* tools/virsh.pod (snapshot-current): Document it.
2011-08-10 21:59:56 -06:00
Eric Blake
6927887829 virsh: fix snapshot-create-as to handle arbitrary names
Found this working on the next patch to use xpath to parse
arbitrary names back out.

* tools/virsh.c (cmdSnapshotCreateAs): Escape user input.
2011-08-10 21:54:20 -06:00
Alex Jia
22da8c941c virsh: fix memory leak in cmdNetworkInfo
* tools/virsh.c: avoid memory leak in cmdNetworkInfo.

* how to reproduce?
  % valgrind -v --leak-check=yes virsh net-info default

  https://bugzilla.redhat.com/show_bug.cgi?id=722806

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-08-02 16:47:39 +08:00
Matthias Bolte
c9ee3d2675 virsh: Fix vol-name and vol-pool commands
This commands don't have a --pool option, so don't tell
vshCommandOptVolBy that there could be one. This made
vshCommandOptString for pooloptname fail and an "missing option"
error was reported.

Make pooloptname optional for vshCommandOptVolBy.
2011-08-01 15:27:55 +02:00
Alex Jia
3f39a0bf27 virsh: avoid missing zero value judgement in cmdBlkiotune
* tools/virsh.c: fix missing zero value judgement in cmdBlkiotune and correct
  vshError information.

  when weight is equal to 0, the cmdBlkiotune will not raise any error information
  when judge weight value first time, and execute else branch to judge weight
  value again, strncpy(temp->field, VIR_DOMAIN_BLKIO_WEIGHT, sizeof(temp->field))
  will be not executed for ever. However, if and only if param->field is equal
  to VIR_DOMAIN_BLKIO_WEIGHT, underlying qemuDomainSetBlkioParameters function
  will check whether weight value is in range [100, 1000].

* how to reproduce?

  % virsh blkiotune ${guestname} --weight 0

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-07-28 08:30:50 -06:00
Alex Jia
1768bf63ed virsh: fix memory leak in cmdVolPath code
* tools/virsh.c: avoid memory leak in cmdVolPath.
* src/libvirt.c: Add doc for virStorageVolGetPath to tell one
  must free() the returned path after use.

* how to reproduce?

% dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img

* actual results:

Detected in valgrind run:

==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22
==16436==    at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16436==    by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so)
==16436==    by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3
==16436==    by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-07-28 10:42:51 +08:00
Eric Blake
0d0bf8507c virsh: expose change-protection during migration
* tools/virsh.c (doMigrate): Add --change-protection flag.
* tools/virsh.pod (migrate): Document it.
2011-07-27 15:19:32 -06:00
Alex Jia
831c81fcd4 tools: format percent strings of nodecpustats
* tools/virsh.c: format strings display for virsh nodecpustats --percent.

* how to reproduce?

% virsh nodecpustats --percent
usage:            2.0%
    user  :       1.0%
    system:       1.0%
idle  :          98.0%
iowait:           0.0%

* after format strings

% virsh nodecpustats --percent
usage:            2.0%
user:             1.0%
system:           1.0%
idle:            98.0%
iowait:           0.0%

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-07-26 09:57:36 -06:00
Eric Blake
7e853d6c1a virsh: use faster bit search
Now that gnulib gives us ffs, we might as well use it.

* tools/virsh.c (vshCmddefGetData): Use ffs rather than
count_one_bits.
2011-07-25 15:57:51 -06:00
Eric Blake
4b7a8e9c0d virsh: make vcpucount use --current consistently
Rename the existing --current flag to the new name --active,
while adding a new flag --current to expose the new
VIR_DOMAIN_AFFECT_CURRENT flag of virDomainGetVcpusFlags.

For backwards compability, the output does not change (even
though the label "current" no longer matches the spelling of
the option that would trigger that number in isolation), and
we accept "--current --live" as an undocumented synonym for
"--active --live" to avoid breaking any existing clients.

* tools/virsh.c (cmdVcpucount): Add --active flag, and rearrange
existing flag handling to expose VIR_DOMAIN_AFFECT_CURRENT support.
* tools/virsh.pod (vcpucount): Document this.
2011-07-25 15:51:22 -06:00
Adam Litke
b31abc6f03 Enable the virDomainBlockPull API in virsh
Define two new virsh commands:
 * blockpull: Initiate a blockPull for the given disk
 * blockjob: Retrieve progress info, modify speed, and cancel active block jobs

Share print_job_progress() with the migration code.

* tools/virsh.c: implement the new commands
2011-07-22 13:41:55 +08:00
Eric Blake
bfb485ced2 save: add virsh commands for manipulating save files
Now you can edit a saved state file even if you forgot to grab
a dumpxml file prior to saving a domain.  Plus, in-place editing
feels so much nicer.

* tools/virsh.c (cmdSaveImageDumpxml, cmdSaveImageDefine)
(cmdSaveImageEdit): New commands.
* tools/virsh.pod (save-image-dumpxml, save-image-define)
(save-image-edit): Document them.
2011-07-21 17:19:56 -06:00
Eric Blake
38149ec145 save: support --xml to virsh save/restore
Also, migrate was missing documentation for the --xml option
added in commit ec5301cb.

* tools/virsh.c (cmdSave, cmdRestore): Add xml argument.
* tools/virsh.pod (save, restore, migrate): Document it.
2011-07-21 16:24:08 -06:00
Eric Blake
a779d2ff2d save: add --bypass-cache flag to virsh save/restore operations
Wire up the new flag to several virsh commands.  Also, the
'dump' command had undocumented flags.

* tools/virsh.c (cmdSave, cmdManagedSave, cmdDump, cmdStart)
(cmdRestore): Add new flag.
* tools/virsh.pod (save, managedsave, dump, start, restore):
Document flags.
2011-07-21 16:24:08 -06:00
Eric Blake
8e22e08935 build: rename files.h to virfile.h
In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.
2011-07-21 10:34:51 -06:00
Lai Jiangshan
7818b7ef85 send-key: Expose the new API in virsh
Also support string names for the linux keycode(auto detect)
* tools/virsh.c: add new command "send-key"
* tools/virsh.pod: documents the new command
2011-07-21 15:58:31 +08:00
Osier Yang
83e849c197 undefine: Extend virsh undefine to support the new flag
If the domain has managed save image, and --managed-save is
not specified, then it fails with an error telling the user
that a managed save image still exists.

If the domain has managed save image, and --managed-save is
specified, it invokes virDomainUndefineFlags. If
virDomainUndefineFlags fails, then it tries to remove the managed
save image using virDomainManagedSaveRemove first, with
invoking virDomainUndefine following. (For compatibility between
new virsh with this patch and older libvirt without this patch).

Similarly if the domain has no managed save image. See the codes for
detail.

NOTE: Have not removing the codes checking if the domain is running
in function "cmdUndefine", it will go along with qemu driver's fix
(allow to undefine a running domain).
2011-07-20 11:12:46 +08:00
Eric Blake
74594c57f1 Revert "virsh: make migrate --tunnelled imply --p2p"
This reverts commit 40143fb697.

The patch prevents future compatibility if migration ever learns
how to do tunnelled without p2p.
2011-07-19 07:14:43 -06:00
Osier Yang
73d4625a04 virsh: Extend virsh dominfo to display if managed save image exists
* tools/virsh.c: new column "Managed save" for "cmdDominfo".
* tools/virsh.pod: Update document of "managedsave" to tell one can
  use "dominfo" to query whether a domain has any managed save image.
2011-07-19 14:24:57 +08:00
Eric Blake
40143fb697 virsh: make migrate --tunnelled imply --p2p
We can make the virsh migrate UI friendlier by supplying the
missing bit automatically instead of erroring out when requesting
--tunnelled without --p2p.

* tools/virsh.c (doMigrate): Make --p2p optional when using
--tunnelled.
* tools/virsh.pod (migrate): Tweak wording accordingly.
2011-07-18 15:19:55 -06:00
Alex Jia
6f669d4ea5 virsh: avoid double free of domain
* tools/virsh.c: avoid double free of domain, when weight value of blkiotune
  less than 0, codes will free domain and jump to cleanup section, however,
  cleanup will free domain again.

Detected in valgrind run:

==21297== ERROR SUMMARY: 20 errors from 20 contexts (suppressed: 69 from 8)
==21297==
==21297== 1 errors in context 1 of 20:
==21297== Invalid read of size 4
==21297==    at 0x40E209B: virDomainFree (libvirt.c:2096)
==21297==    by 0x8065274: cmdBlkiotune (virsh.c:3695)
==21297==    by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297==    by 0x806B967: main (virsh.c:14487)
==21297==  Address 0x446ad48 is 0 bytes inside a block of size 36 free'd
==21297==    at 0x4005B0A: free (vg_replace_malloc.c:325)
==21297==    by 0x406814D: virFree (memory.c:310)
==21297==    by 0x40D6635: virReleaseDomain (datatypes.c:243)
==21297==    by 0x40D6C5E: virUnrefDomain (datatypes.c:280)
==21297==    by 0x40E20B9: virDomainFree (libvirt.c:2101)
==21297==    by 0x8065297: cmdBlkiotune (virsh.c:3613)
==21297==    by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297==    by 0x806B967: main (virsh.c:14487)
==21297==
==21297==
==21297== 1 errors in context 2 of 20:
==21297== Invalid read of size 4
==21297==    at 0x40E1FE6: virDomainFree (libvirt.c:2092)
==21297==    by 0x8065274: cmdBlkiotune (virsh.c:3695)
==21297==    by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297==    by 0x806B967: main (virsh.c:14487)
==21297==  Address 0x446ad48 is 0 bytes inside a block of size 36 free'd
==21297==    at 0x4005B0A: free (vg_replace_malloc.c:325)
==21297==    by 0x406814D: virFree (memory.c:310)
==21297==    by 0x40D6635: virReleaseDomain (datatypes.c:243)
==21297==    by 0x40D6C5E: virUnrefDomain (datatypes.c:280)
==21297==    by 0x40E20B9: virDomainFree (libvirt.c:2101)
==21297==    by 0x8065297: cmdBlkiotune (virsh.c:3613)
==21297==    by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297==    by 0x806B967: main (virsh.c:14487)

* how to reproduce?
  % valgrind -v --leak-check=full virsh blkiotune guestname --weight -1
2011-07-18 11:19:40 -06:00
Eric Blake
ca92c85756 virsh: improve option handling
The documentation for vshCommandOptString claims that it returns
-1 on a missing required argument, but in reality, that error
message was unreachable (it was buried inside an if clause that
is true only if the argument was present).  The code was so hairy
that I decided a rewrite would make it easier to understand,
and actually return the error values we want.

Meanwhile, our construction guarantees that all vshCmdOpt have
a non-null def member, so there are some redundant checks that
can be trimmed.

* tools/virsh.c (vshCommandOpt): Alter signature.
(vshCommandOptInt, vshCommandOptUInt, vshCommandOptUL)
(vshCommandOptString, vshCommandOptLongLong)
(vshCommandOptULongLong, vshCommandOptBool): Adjust all callers.
(vshCommandOptArgv): Remove dead condition.
2011-07-15 15:58:51 -06:00
Hu Tao
e962a57994 add --cache, --serial, --shareable and --address to attach-disk
This adds four options for virsh command attach-disk.

--cache option allows user to specify cache mode of disk device
from virsh command line when attaching a disk device.

--serial option allows user to specify serial string of disk device
from virsh command line when attaching a disk device.

--shareable option allows user to specify whether the disk device is
shareable between domains when attaching a disk device from virsh
command line.

--address option allows user to specify address of disk device when
attaching a disk device.
2011-07-15 12:14:36 -06:00
Taku Izumi
3807d552c7 setvcpus: add "--current" option to "virsh setvcpus"
This patch adds the --current option to "virsh setvcpus"
command. Currently "virsh setvcpus" command supports
"--live" and "--config" , but "--current" option.
From view of consistency, it's reasonable to support
"--current" option too.

When --current is specified, it affects a "current"
domain.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-07-15 08:19:24 -06:00
Jiri Denemark
f580a33ffd virsh: fix previous patch
The last patch breaks make check for two reasons. First, it reverses the
condition but leaves default level unchanged, so instead of not printing
anything but errors before the patch it now prints all debug messages by
default. Second, you forgot to change -d5 option passed to virsh in
tests/virsh-optparse to -d0; the script wants to see all debug messages.
2011-07-14 07:14:05 -06:00
Supriya Kannery
c1710ca6a0 virsh: Make "DEBUG" loglevel the superset
Aligning loglevel values of virsh to that of libvirt.
"DEBUG"=0 loglevel, when specified through commandline or
env variable, should log all the messages. "ERROR=4"
should log only error messages.

Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
2011-07-14 07:06:16 -06:00
Supriya Kannery
2de8aa8fd0 virsh: Avoid using magic numbers for logging
Replace magic numbers with loglevel variables.

Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
2011-07-14 07:03:40 -06:00
Eric Blake
0983905c5a virsh, daemon: prefer unsigned flags
* tools/virsh.c (vshCmdDef): Change flags type.
* daemon/remote.c (remoteDispatchOpen): Likewise.
2011-07-13 17:05:10 -06:00
Nan Zhang
23cbf1e0d4 virsh: fix missing prompt message for 'snapshot-delete' command
Make the command 'virsh snapshot-delete' has the appropriate prompt
message when executing sucessful or failed.
2011-07-13 11:28:42 -06:00
Daniel P. Berrange
eb7be6a606 Add a new 'virsh qemu-attach' command.
This command allows libvirt to attach to an existing QEMU
instance.

 $ qemu-kvm -cdrom ~/demo.iso \
     -monitor unix:/tmp/demo,server,nowait \
     -name foo \
     -uuid cece4f9f-dff0-575d-0e8e-01fe380f12ea  &
 $ QEMUPID=$!
 $ virsh qemu-attach $QEMUPID
2011-07-12 15:39:03 +01:00
Eric Blake
085d241531 virsh: make destroy sound less scary
Destroy has a rather negative English connotation.  Try to reduce
the impact, so newbies aren't as scared to use it.

* tools/virsh.c: Tweak all destroy documentation.
* tools/virsh.pod: Likewise.
2011-07-07 13:12:50 -06:00
Eric Blake
8437e738fa build: use gnulib pthread_sigmask
Gnulib finally learned how to do pthread_sigmask on mingw.

* .gnulib: Update to latest, for pthread_sigmask.
* bootstrap.conf (gnulib_modules): Add pthread_sigmask.
* configure.ac (AC_CHECK_FUNCS): Drop redundant check.
* src/rpc/virnetclient.c (virNetClientSetTLSSession)
(virNetClientIOEventLoop): Make code unconditional.
* src/util/command.c (virFork): Likewise.
* tools/virsh.c (doMigrate, cmdMigrate): Likewise.
2011-07-07 13:12:44 -06:00
Eric Blake
cdb0e0dc3f virsh: avoid uninitialized variable
Detected by Coverity; neither vshCmddefHelp nor vshCmdOptParse
was initializing opts_required.

* tools/virsh.c (vshCmddefOptParse): Always initialize bitmaps.
2011-06-30 11:36:51 -06:00
Eric Blake
6f9432fcaf virsh: avoid integer overflow
Detected by Coverity.  info.nrVirtCpu is unsigned short, but if
cpumaplen is int, then the product of the two in vshMalloc risks
unintended sign extension.  cmdVcpuinfo had already solved this
by using size_t cpumaplen.

* tools/virsh.c (cmdVcpuPin): Use correct type.
2011-06-30 11:36:51 -06:00
Osier Yang
e67bc20778 virsh: Fix a problem of buildPoolXML
It doesn't generate "<name>" and "<format>" nodes for "<source>"
even if they are explicitly specified. This patch fixes it.
2011-06-30 21:39:58 +08:00
Matthias Bolte
f0739fc579 Add node prefix to virNodeGet(CPU|Memory)Stats structs and defines 2011-06-28 17:18:33 +02:00
Eric Blake
28e45afc3f build: rename Vcpupin to VcpuPin
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words.  Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling.  For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.

* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
2011-06-27 09:55:11 -06:00
Taku Izumi
e0858026a2 vcpupin: add query option to virsh vcpupin command
This patch teaches "virsh vcpupin" command to query if no list
is given. Its feature is to show CPU affinity information in more
reader-friendly way.

 # virsh vcpupin VM --config
 VCPU: CPU Affinity
 ----------------------------------
    0: 1-6,9-20
    1: 10
    2: 5,9-11,15-20
    3: 1,3,5,7,9,11,13,15

When cpulist is omitted, vcpu number is optional. When vcpu number is
provided, information of only specified vcpu is displayed.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-06-24 17:00:22 -06:00
Taku Izumi
ffb552ebf0 vcpuinfo: add the code to fallback to try new API
The "virsh vcpuinfo" command results in failure when the target domain
is inactive on KVM. This patch improves this behavior by adding the
fallback to invoke virDomainGetVcpupinInfo API in case of
virDomainGetVcpus API returns error and the target domain is inactive.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-06-24 17:00:22 -06:00
Eric Blake
f7f5e3e806 Revert "Enable the virDomainBlockPull API in virsh"
This reverts commit 3e2493ce28.
2011-06-24 08:41:24 -06:00
Daniel P. Berrange
3ba937da42 Allow automatic kill of guests when a connection is closed
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.

* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
  upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
  commands
2011-06-24 12:15:10 +01:00
Eric Blake
491858bf3c virsh: avoid bogus description
https://bugzilla.redhat.com/show_bug.cgi?id=682121

Gettext reserves the empty string for internal use, and it must
not be passed through _().  We were violating this for commands
that (for whatever reason) used "" for their description.

* tools/virsh.c (vshCmddefHelp): Don't translate empty string.
Reported by Tatsuo Kawasaki.
2011-06-21 11:46:09 -06:00
Eric Blake
9256ad84fc virsh: enhance snapshot-create-as
Similar to pool-create-as.

* tools/virsh.c (cmdSnapshotCreateAs): Add --print-xml.
* tools/virsh.pod: Document it.
2011-06-20 10:44:08 -06:00
Eric Blake
1546dcf866 virsh: add snapshot-create-as command
Producing an xml file just for name and description fields is
overkill; this makes life easier from virsh.

* tools/virsh.c (cmdSnapshotCreateAs): New command.
(snapshotCmds): Install it.
* tools/virsh.pod: Document it.
2011-06-20 10:44:06 -06:00
Eric Blake
ea71d82816 virsh: clarify snapshot vs. save
* tools/virsh.c (info_snapshot_create, info_save): Clarify
description.
* tools/virsh.pod (save): Likewise.
2011-06-20 10:05:27 -06:00
Daniel P. Berrange
b325768064 Fix compile warnings in virsh vcpupin
The 'char *cur' variable was being assigned from a
'const char *' string, thus discarding constness.
As well as causing a compile warning, it masked a
piece of code which attempts to assign to the
previously const string.

* tools/virsh.c: Fix const-ness of 'cur' variable in vcpupin
2011-06-20 14:50:27 +01:00
Taku Izumi
c4a8ca71b1 vcpupin: add reset option to virsh vcpupin command
When resetting vcpupin setting, we have to specify all host physical
cpus as a cpulist parameter of virsh vcpupin command. It's a little
tedious.

This patch changes to allow to receive the special keyword 'r' as a cpulist
parameter of virsh vcpupin command when resetting vcpupin setting.

If you set the following:

 # virsh vcpupin VM 0 r

the vcpu0 will be pinned to all physical cpus.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-06-20 18:14:54 +08:00
Taku Izumi
2903534a30 vcpupin: improve vcpupin definition of virsh vcpupin
When using vcpupin command, we have to speficy comma-separated list as cpulist,
but this is tedious in case the number of phsycal cpus is large.
This patch improves this by introducing special markup "-" and "^" which are
similar to XML schema of "cpuset" attribute.

The example:

 # virsh vcpupin Guest 0 0-15,^8

 is identical to

 # virsh vcpupin Guest 0 0,1,2,3,4,5,6,7,9,10,11,12,13,14,15

NOTE: The expression is sequentially evaluated, so "0-15,^8" is not identical
to "^8,0-15".

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-06-20 18:14:54 +08:00
Hu Tao
1bb414af27 Add new parameters for blkiotune
Add --config, --live and --current for command blkiotune
2011-06-20 15:52:11 +08:00
Jiri Denemark
5f1bbecb7d virsh: Add support for virDomainGetControlInfo 2011-06-16 19:13:08 +02:00
Eric Blake
a2ff807a68 virsh: reduce complexity in argv iteration
This reduces things from O(n^2) to O(n).

* tools/virsh.c (vshCommandOptArgv): Change signature.
(cmdEcho): Update caller.
Based on a patch by Lai Jiangshan.
2011-06-15 07:43:01 -06:00
Adam Litke
3e2493ce28 Enable the virDomainBlockPull API in virsh
Define two new virsh commands:
 * blockpull: Perform block pull operations (incremental plus start
              and stop continuous streams)
 * blockpullinfo: Retrieve progress info for continuous block pull

Share print_job_progress() with the migration code.

* tools/virsh.c: implement the new commands

Signed-off-by: Adam Litke <agl@us.ibm.com>
2011-06-14 22:28:45 -06:00
Minoru Usui
64609328e0 virNodeGetMemoryStats: Implement virsh support
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 16:36:13 -06:00
Minoru Usui
7e6cb82d1c virNodeGetCPUStats: Implement virsh support
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 15:32:37 -06:00
Lai Jiangshan
fb246acfa7 add VSH_OFLAG_REQ_OPT options
A VSH_OFLAG_REQ_OPT option means --optionname is required when used.
It will kill any ambiguity, even a !VSH_OFLAG_REQ option listed before
a VSH_OFLAG_REQ option, if the !VSH_OFLAG_REQ option is a
VSH_OFLAG_REQ_OPT option.

It will help us use optional argument with VSH_OT_ARGV argument.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2011-06-14 11:40:52 -06:00
Lai Jiangshan
6cf77ca7bf allow name for VSH_OT_ARGV options
A name will improve the usege, example

# virsh help echo
  NAME
    echo - echo arguments

  SYNOPSIS
    echo [--shell] [--xml] [<string>]...

  DESCRIPTION
    Echo back arguments, possibly with quoting.

  OPTIONS
    --shell          escape for shell use
    --xml            escape for XML use
    <string>         arguments to echo

"[<string>]..." is added to SYNOPSIS.
"<string>         arguments to echo" is added to OPTIONS.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2011-06-14 11:05:09 -06:00
Michal Privoznik
f67f965077 virsh: Add daemon version reporting
'virsh version' might report against which version of libvirtd is
running.
2011-06-14 10:49:01 +02:00
Osier Yang
41514f7b3e qemu: Parse current balloon value returned by query_balloon
Qemu once supported following memory stats which will returned by
"query_balloon":

    stat_put(dict, "actual", actual);
    stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
    stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
    stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
    stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
    stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
    stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);

But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.

libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
2011-06-14 11:21:35 +08:00
Hu Tao
fbd7820b2c Deprecate several CURRENT/LIVE/CONFIG enums
This patch deprecates following enums:

VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG

VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG

VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG

And modify internal codes to use virDomainModificationImpact.
2011-06-13 14:17:16 -06:00
Taku Izumi
9a3404ed71 vcpupin: add the new option to "virsh vcpupin" command
This patch adds the new option (--live, --config and --current) to
"virsh vcpupin" command. The behavior of above aption is the same as
that of "virsh setmem", "virsh setvcpus", and whatnot.
When the --config option is specified, the command affects a persistent
domain, while --live option is specified, it affects a running (live) domain.
The --current option cannot be used with --config or --live at the same
time, and when --current is specified, it affects a "current" domain.
2011-06-13 23:51:04 +08:00
Eric Blake
1eca8c3e8c build: silence coverity false positives
Coverity complained about these intentional fallthrough cases, but
not about other cases that were explicitly marked with nice comments.

For some reason, Coverity doesn't seem smart enough to parse the
up-front English comment in virsh about intentional fallthrough :)

* tools/virsh.c (cmdVolSize): Mark fallthrough in a more typical
fashion.
* src/conf/nwfilter_conf.c (virNWFilterRuleDefDetailsFormat)
(virNWFilterRuleDetailsParse): Mark explicit fallthrough.
2011-06-08 05:30:56 -06:00
Osier Yang
b73f1f8d5c virsh: Expose virDomainMigrateSetMaxSpeed API to virsh
API virDomainMigrateSetMaxSpeed was introduced since 0.9.0, but
no command in virsh yet.
2011-06-08 10:40:57 +08:00
Eric Blake
33d90bafe7 API: consolidate common unreleased enums
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).

After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.

* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c	(virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
2011-06-04 09:58:53 +02:00
Eric Blake
72519f7331 docs: document iface-* commands
I intentionally set things up so 'virsh help interface' lists
commands in alphabetical order, but 'man virsh' lists them in
topical order; this matches our practice on some other commands.

* tools/virsh.pod: Document all iface commands.
* tools/virsh.c (ifaceCmds): Sort.
2011-06-02 13:29:12 -06:00
Michal Privoznik
3ef7350c42 screenshot: Expose the new API in virsh
* tools/virsh.c: Add screenshot command
* tools/virsh.pod: Document new command
* src/libvirt.c: Fix off-be-one error
2011-06-02 14:57:00 +02:00
Daniel P. Berrange
ef983dfe5a Fix sysinfo/virsh build problems on Win32
The virSysinfoIsEqual method was mistakenly inside a #ifndef WIN32
conditional.

The existing virSysinfoFormat is also stubbed out on Win32, even
though the code works without any trouble. This breaks XML output
on Win32, so the stub is removed.

virsh migrate mistakenly had some variables inside the conditional

* src/util/sysinfo.c: Build virSysinfoIsEqual on Win32 and remove
  Win32 stub for virSysinfoFormat
* tools/virsh.c: Fix variable declaration on Win32
2011-05-31 14:17:21 +01:00
Daniel P. Berrange
ec5301cb85 Allow virsh to pass in a custom XML document for migration
Switch virsh migrate over to use virDomainMigrate2 and
virDomainMigrateToURI2. This is still compatible with
older libvirts, because these methods dynamically choose
whether to perform v1, v2 or v3 migration based on declared
RPC support from the libvirtd instances

Add a --xml arg which allows the user to pass in a custom
XML document. This XML document must be ABI compatible
with the current *live* XML document for the running guest
on the source host. ABI compatibility will be enforced by
any driver supporting this function

* tools/virsh.c: Add '--xml' arg to migrate command
2011-05-31 12:14:57 +01:00
Eric Blake
97f63513ff virsh: improve schedinfo querying ability
Since we can now set just --live or --config, we also need to be
able to query that back.

In the case of setting both --live and --config, it shouldn't matter
which value we read back; otherwise, since querying treats the two
flags as mutually exclusive, so does this patch.

* tools/virsh.c (cmdSchedinfo): Use new API where appropriate.
2011-05-29 18:51:16 +08:00
Eric Blake
163e5f04ef maint: prefer newer API names internally
Rather mechanical in nature.

* src/driver.h: Use newer virTypedParameter API names.
* src/libvirt.c: Likewise.
* daemon/remote.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/xen/xen_driver.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xen_hypervisor.h: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
2011-05-29 18:26:31 +08:00
Michal Privoznik
761d1880be interface: expose network config transaction API to virsh
This implements the commands iface-begin, iface-commit, and iface-rollback,
which simply call the corresponding functions in the libvirt API.
2011-05-27 14:29:25 -04:00
Hu Tao
118eac373d Add new flags for setting memory parameters
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command

* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
2011-05-27 15:35:11 +08:00
Matthias Bolte
6df05081cb virsh: time_t is not a long on FreeBSD
localtime_r expects time_t.
2011-05-25 18:47:50 +02:00
Supriya Kannery
3c36f936b9 virsh: Use Env variables for debug level and logfile
Use variables VIRSH_DEBUG and VIRSH_LOG_FILE for controlling virsh logging.

Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
2011-05-19 17:53:46 -06:00
Eric Blake
d218344e6c virsh: optimize creation of default connection
Ramon de Carvalho Valle reported a problem with:
virsh connect qemu:///system
as a non-root user.  The real root problem appears to be a regression
in libvirtd being auto-started on the default qemu:///session URI;
however, the symptom points to an independent flaw in virsh - we
shouldn't be wasting efforts on making a connection if we aren't going
to be using that connection.  Fixing virsh avoids Ramon's issue, while
I work in the meantime to fix the real libvirtd regression.

This patch looks big, but that's because 'gcc -Wmissing-field-initializers'
gets triggered by './autobuild.sh --enable-compile-warnings=error', so I
had to add 0 initialization to everyone (rather than my preference of
just adding the non-zero flags to virshCmds and to cmdConnect).

Meanwhile, if you use 'virsh -c URI', the connection must succeed; this
patch _only_ optimizes the default connection to be deferred to a later
point where we know if a particular command to be run needs a connection.

* tools/virsh.c (VSH_CMD_FLAG_NOCONNECT): New flag.
(vshCmdDef): Add new flags field.
(vshCommandRun): Honor new flag.
(domManagementCmds, domMonitoringCmds, storagePoolCmds)
(storageVolCmds, networkCmds, nodedevCmds, ifaceCmds)
(nwfilterCmds, secretCmds, virshCmds, snapshotCmds)
(hostAndHypervisorCmds): Populate new field.
(vshReconnect): Don't warn on initial connection.
2011-05-18 12:47:46 -06:00
Hu Tao
42af244347 virsh: add parameters --live, --config and --current to cmd schedinfo
This enables user to modify cpu.shares even when domain is inactive.
2011-05-17 10:52:16 -06:00
Jiri Denemark
c256542e76 virsh: Correctly initialize libvirt
virsh didn't call virInitialize(), which (among other things)
initializes virLastErr thread local variable. As a result of that, virsh
could just segfault in virEventRegisterDefaultImpl() since that is the
first call that touches (resets) virLastErr.

I have no idea what lucky coincidence made this bug visible but I was
able to reproduce it in 100% cases but only in one specific environment
which included building in sandbox.
2011-05-17 12:37:30 +02:00
Matthias Bolte
33a5f8ca82 virsh: Report an error when virGetUserDirectory fails
Otherwise virsh shows the interactive greeting and then silently exists
instead of entering interactive mode.
2011-05-16 18:40:04 +02:00
Jiri Denemark
0eaf4d93be virsh: Prefer virDomainGetState over virDomainGetInfo 2011-05-16 10:04:19 +02:00
Matthias Bolte
992f2b4e32 virsh: Fix uninitialized variable warning
Reported on FreeBSD only.
2011-05-14 06:54:18 +02:00
Lai Jiangshan
a083d44c87 inject-nmi: Expose the new API in virsh 2011-05-10 11:40:51 -06:00
Matthias Bolte
fc0ab50abd Fix two uninitialized variable warnings
gcc only reports them when compiling with -O3.
2011-05-10 08:39:56 +02:00
Eric Blake
f84fe150e1 maint: avoid comparisons to bool constants
HACKING already mentions that comparisons against literal 'true'
are unsafe; for consistency, also shorten comparisons against 'false'.

* src/conf/domain_conf.c (virDomainNetDefParseXML): Simplify.
* src/nwfilter/nwfilter_gentech_driver.c
(virNWFilterDomainFWUpdateCB): Likewise.
* tools/virsh.c (cmdVolDownload, vshCommandRun, vshPrintExtra):
Likewise.
2011-05-06 10:28:28 -06:00
Eric Blake
f99e1389cc virsh: use new method for easier log to file
Easier to maintain, and no longer an arbitrary line length limit.

* tools/virsh.c (vshOutputLogFile): Replace snprintf with
virBuffer.
2011-05-05 13:48:19 -06:00
Eric Blake
68ea80cfdd maint: rename virBufferVSprintf to virBufferAsprintf
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose.  Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.

global rename performed with:

$ git grep -l virBufferVSprintf \
  | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'

then revert the changes in ChangeLog-old.
2011-05-05 13:47:40 -06:00
Eric Blake
44699b3283 virsh: avoid null pointer dereference
Clang detected that vol-download will call unlink(NULL) if there
is a parse error during option parsing.  Also, mingw doesn't like
unlinking an open file.

* tools/virsh.c (cmdVolDownload): Only unlink file if created.
2011-05-03 11:00:25 -06:00
Supriya Kannery
0431551435 virsh: fix regression in log to file
Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".

Fix regression in virsh logging

Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
2011-04-30 10:28:02 -06:00
Eric Blake
e39c46a5fd build: fix getcwd portability problems
* bootstrap.conf (gnulib_modules): Add getcwd-lgpl.
* tests/commandtest.c (checkoutput): Drop unused cwd.
* tests/commandhelper.c (main): Let getcwd malloc.
* tests/testutils.c (virTestMain): Likewise.
* tools/virsh.c (cmdPwd): Likewise.
(virshCmds): Expose cmdPwd and cmdCd on mingw.
2011-04-29 12:08:26 -06:00
Eric Blake
c63ec6e347 virsh: avoid compiler warning on mingw
We don't use gnulib's sanitizations for vfprintf, but vshDebug
was used with %zu, which means that it would fail on mingw.
Thank goodness the compiler indirectly caught this for us :)

virsh.c: In function 'vshDebug':
virsh.c:12105:5: warning: function might be possible candidate for
'ms_printf' format attribute [-Wmissing-format-attribute]

since mingw <stdio.h> hasn't yet added gcc attributes to vfprintf.

* tools/virsh.c (vshDebug): Avoid vfprintf.
(vshPrintExtra): Use lighter-weight fputs.
Reported by Matthias Bolte.
2011-04-28 15:09:08 -06:00
Wen Congyang
2225a49106 fix virsh's regression
This patch does the following things:
1. The return value of cmdSchedInfoUpdate() can be -1, 0 and 1. So the
   type of return value should be int not bool.(This function is not a
   entry of a virsh command, but the name of this function likes cmdXXX)

2. The type of cmdSchedinfo()'s, cmdFreecell()'s, cmdPoolList()'s and
   cmdVolList()'s return value is bool not int, so change the type of
   variable ret_val, func_ret and functionReturn.

3. Add a variable functionReturn for cmdMigrate(), cmdAttachInterface(),
   cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to save the
   return value.

4. Change the type of variable ret in the function cmdAttachDevice(),
   cmdDetachDevice(), cmdUpdateDevice(), cmdAttachInterface(),
   cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to int, as
   we use it to save the return value of virXXX() and the type of virXXX()'s
   return value is int not bool.

5. Do some cleanup when virBuff.error is 1.

The bug 1-4 were introduced by commit b56fa5bb.
2011-04-28 12:25:59 +08:00
Eric Blake
b56fa5bb37 virsh: nuke use of TRUE and FALSE
Gnulib already guarantees <stdbool.h>, so it is easier to just
use the standardized spellings.

* tools/virsh.c (vshCmdDef): Change callback to return real bool.
(__vshControl): Change several fields to bool.
(vshCommandOptBool): Change return type.
All callers updated.
* tools/Makefile.am (virsh-net-edit.c, virsh-pool-edit.c):
Likewise.
2011-04-19 08:16:14 -06:00
Eric Blake
b9973f526c virsh: fix regression in parsing optional integer
Regression introduced in 0.8.5, commit c1564268.  The command
'virsh freecell 0' quit working when it changed from an optional
string to an optional integer.

This patch introduces a slight change that specifying an option
twice is now detected as an error.  It also changes things so
that a command that has more than 1 required option will not
complain about missing options if one but not all of the options
were given in long format, as in 'virsh vol-create --pool p file',
as well as making positional parsing work for all optional
options (each positional argument is associated with the earliest
option that has not yet been seen by name).

Optional boolean options can appear before required argument
options, because they don't affect positional argument parsing,
and obviously a required boolean option makes no sense.

Technically, this patch renders VSH_OT_STRING and VSH_OT_DATA
redundant; but cleaning that up can be a separate patch.

No command should ever need more than 32 options, right? :)

* tools/virsh.c (vshCmddefGetData, vshCmddefGetOption)
(vshCommandCheckOpts): Alter parameters to use bitmaps.
(vshCmddefOptParse): New function.
(vshCommandParse): Update for better handling of positional
arguments.
(vshCmddefHelp): Allow unit tests to validate options.
2011-04-15 16:08:18 -06:00
Eric Blake
6b75a1a5b0 virsh: list required options first
The current state of virsh parsing is that:

$ virsh vol-info /path/to/image
$ virsh vol-info --pool default /path/to/image
$ virsh vol-info --pool default --vol /path/to/image

all lookup the volume by path (technically, the last two also attempt
a name lookup within a pool, whereas the first skips that step, but
the end result is the same); meanwhile:

$ virsh vol-info default /path/to/image

complains about unexpected data.  Why?  Because the --pool option is
optional, so default was parsed as the --vol argument, and
/path/to/image.img doesn't match up with any remaining options that
require an argument.  For proof, note that:

$ virsh vol-info default --vol /path/to/image

complains about looking up 'default' - the parser mis-associated both
arguments with --vol.  Given the above, the only way to specify pool
is with an explicit "--pool" argument (you can't specify it
positionally).  However, named arguments can appear in any order, so:

$ virsh vol-info /path/to/image --pool default
$ virsh vol-info --vol /path/to/image --pool default

have also always worked.  Therefore, this patch has no functional
change on vol-info option parsing, but only on 'virsh help vol-info'
synopsis layout.  However, it also allows the next patch to 1) enforce
that required options are always first (without this patch, the next
patch would fail the testsuite), and 2) allow the user to omit the
"--pool" argument.  That is, the next patch makes it possible to do:

$ virsh vol-info /path/to/image default

which to date was not possible.

* tools/virsh.c (opts_vol_create_from, opts_vol_clone)
(opts_vol_upload, opts_vol_download, opts_vol_delete)
(opts_vol_wipe, opts_vol_info, opts_vol_dumpxml, opts_vol_key)
(opts_vol_path): List optional pool parameter after required
arguments.
2011-04-15 15:39:53 -06:00
Taku Izumi
0ad06c1116 setmaxmem: add the new options to "virsh setmaxmem" command
This patch adds the new options (--live, --config, and --current) to
"virsh setmaxmem" command. The behavior of above options is the same
as that of "virsh setmem".  When the --config option is specified, a
modification is effective for the persistent domain, while the --live
option is specified, a modification is effective for an active
domain. The --current option is specified, it affects a current
domain.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-04-08 20:22:12 -06:00
Taku Izumi
80427f1d87 setmem: add --current option to virsh setmem command
This patch adds the new option (--current) to the "virsh setmem" command.
When --current option is specified, it affects a "current" domain.
The word "current" denotes that if a domain is running, it affects
a running domain only; otherwise it affects a persistent domain.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-04-07 17:19:46 -06:00
Taku Izumi
74891d9488 setmaxmem: remove the code to invoke virDomainSetMemory in cmdSetmaxmem
When the new maximum memory size becomes less than the current memory size,
I think it is not the libvirt client but the each driver that decides the behavior
(reject the operation or shrink the current memory size).

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-04-07 16:18:43 -06:00
Daniel P. Berrange
7d76d5d506 Enable -Wmissing-format-attribute warning
Add a couple of missing ATTRIBUTE_FMT_PRINTF annotations

* tools/virsh.c, tests/testutils.c: Add printf format attribute
* m4/virt-compile-warnings.m4: Enable -Wmissing-format-attribute
2011-04-05 11:39:52 +01:00
Matthias Bolte
36deff0499 virsh: Remove two 4kb stack allocations 2011-04-05 09:07:40 +02:00
Jiri Denemark
1e8f20799c virsh: Fix documentation for memtune command
Commit 78ba748ef1 claims to fix
documentation for swap_hard_limit virsh memtune option but it only fixes
documentation in formatdomain.html and libvirt.h. This patch completes
the task by fixing "virsh help memtune" output and memtune section of
virsh man page.
2011-04-01 11:31:10 +02:00
Eric Blake
6c9e89bbd2 maint: avoid locale-sensitivity in string case comparisons
strcase{cmp/str} have the drawback of being sensitive to the global
locale; this is unacceptable in a library setting.  Prefer a
hard-coded C locale alternative for all but virsh, which is user
facing and where the global locale isn't changing externally.

* .gnulib: Update to latest, for c-strcasestr change.
* bootstrap.conf (gnulib_modules): Drop strcasestr, add c-strcase
and c-strcasestr.
* cfg.mk (sc_avoid_strcase): New rule.
(exclude_file_name_regexp--sc_avoid_strcase): New exception.
* src/internal.h (STRCASEEQ, STRCASENEQ, STRCASEEQLEN)
(STRCASENEQLEN): Adjust offenders.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextEjectMedia):
Likewise.
* tools/virsh.c (namesorter): Document exception.
2011-03-30 20:26:27 -06:00
Daniel P. Berrange
6299ca71c4 Add vol-upload and vol-download commands to virsh
The new commands vol-upload and vol-download, allow a local file
to be transferred to/from a storage volume.

* tools/virsh.c: Add vol-upload and vol-download commands
* tools/virsh.pod: Document new commands
2011-03-29 12:17:38 +01:00
Eric Blake
6eaa4ee41b virsh: allow empty string arguments
"virsh connect ''" should try to connect to the default connection,
but the previous patch made it issue a warning about an invalid URI.

* tools/virsh.c (VSH_OFLAG_EMPTY_OK): New option flag.
(vshCommandOptString): Per the declaration, value is required to
be non-NULL.  Honor new flag.
(opts_connect): Allow empty string connection.
2011-03-15 14:33:54 -06:00
Michal Privoznik
e6a8f9a16a virsh: Insert error messages to avoid a quiet abortion of commands
in case of incorrect option parsing.
2011-03-14 09:33:55 -06:00
Jiri Denemark
976eb124e7 virsh: Allow starting domains by UUID 2011-03-14 12:34:39 +01:00
Gui Jianfeng
17e7556dcf virsh: Adding blkiotune command to virsh tool
Adding blkiotune command to virsh tool

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
2011-03-10 17:54:08 -07:00
Taku Izumi
2d70a46911 setmem: add the new options to "virsh setmem" command
This patch adds the new options (--live and --config)  to "virsh setmem" command.
The behavior of above options is the same as that of "virsh setvcpus" and so on.
That is, when the --config option is specified, a modification is effective for
the persistent domain. Moreover we can modify the memory size of inactive domains
as well as that of active domains.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-03-10 15:02:58 -07:00
Michal Privoznik
d03f199595 virsh: Change option parsing functions to return tri-state information
This is needed to detect situations when optional argument was
specified with non-integer value: '--int-opt foo'. To keep functions
uniform vshCommandOptString function was also changed, because it
returns tri-state value as well. Given result pointer is updated only
in case of success. If parsing fails, result is not updated at all.
2011-03-08 13:25:52 -07:00
Michal Privoznik
dc3d60ecd5 virsh: change vshCommandOptString return type and fix const-correctness
This function should return pointer to const, because we don't want
to change command option value. Therefore we can ensure const-correctness.
2011-03-08 13:25:37 -07:00
Daniel P. Berrange
2ed6cc7bec Expose event loop implementation as a public API
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling

   virEventRegister(....callbacks...)

The app would call

   virEventRegisterDefaultImpl()

And then have a thread somewhere calling

    static bool quit = false;
    ....
    while (!quit)
      virEventRunDefaultImpl()

* daemon/libvirtd.c, tools/console.c,
  tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
  virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
  and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
  VIR_FROM_EVENTS
2011-03-07 14:16:13 +00:00
Daniel P. Berrange
343eaa150b Move event code out of the daemon/ into src/util/
The event loop implementation is used by more than just the
daemon, so move it into the shared area.

* daemon/event.c, src/util/event_poll.c: Renamed
* daemon/event.h, src/util/event_poll.h: Renamed
* tools/Makefile.am, tools/console.c, tools/virsh.c: Update
  to use new virEventPoll APIs
* daemon/mdns.c, daemon/mdns.c, daemon/Makefile.am: Update
  to use new virEventPoll APIs
2011-03-07 14:16:13 +00:00
Phil Petty
5a81401235 fixes for several memory leaks
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-03-04 09:52:12 -07:00
Daniel P. Berrange
449b4c87b5 Fix discard of expected errors
In a couple of commands virsh catches & ignores errors, but fails
to reset last_error. Thus the error is ignored, but still reported
to the user.

* tools/virsh.c: Reset last_error if ignoring an error
2011-02-23 11:11:55 +00:00
Osier Yang
8fcc76a6e2 virsh: replace vshPrint with vshPrintExtra for snapshot list
Otherwise extra information will be printed even if "--quiet"
is specified.

* tools/virsh.c
2011-02-22 10:06:08 +08:00
Michal Privoznik
595174aeb7 virsh: freecell --all getting wrong NUMA nodes count
Virsh freecell --all was not only getting wrong NUMA nodes count, but
even the NUMA nodes IDs. They doesn't have to be continuous, as I've
found out during testing this. Therefore a modification of
nodeGetCellsFreeMemory() error message.
2011-02-18 09:26:40 -07:00
Eric Blake
1a82c5f7c6 build: silence some clang warnings
* tools/virsh.c (cmdHelp): Kill dead variables.
2011-02-15 10:43:40 -07:00
Eric Blake
92f0ed0353 virsh: avoid mingw compiler warnings
Compilation on mingw was warning about %lld use in fprintf, and
in the gnulib strptime module about dead labels.

* tools/virsh.c (vshPrint): Change redirect.
(vshPrintExtra): Allow use within vshPrint.  Avoid fprintf on
arbitrary formats, since we aren't using gnulib module; instead,
use virVasprintf to pre-format.
(vshError): Likewise.
* .gnulib: Update to latest, for mingw strptime warning fix.
Reported by Matthias Bolte.
2011-02-12 06:39:27 -07:00
Daniel P. Berrange
100f4a63a2 Avoid pthread_sigmask on Win32 platforms
Win32 doesn't have a concept of signal masks so disable that
code. It is unclear how SIGINT is delivered (if at all) on
Win32, so this might further work to provide an alternative
to pthread_sigmask

* tools/virsh.c: Avoid pthread_sigmask on Win32
2011-02-10 14:30:10 +00:00
Eric Blake
c82be0530e sysinfo: implement virsh support
* tools/virsh.c (cmdSysinfo): New function.
(hostAndHypervisorCmds): Add it.
* tools/virsh.pod: Document it.
2011-02-08 19:29:48 -07:00
Jiri Denemark
2169472ab6 qemu: Add shortcut for HMP pass through
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:

    virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'

which is not a very convenient way of debugging qemu.

This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just

    virsh qemu-monitor-command --hmp DOM "info kvm"

Also the result is converted from

    {"return":"kvm support: enabled\r\n"}

to just plain HMP:

    kvm support: enabled

If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
2011-02-03 22:20:30 +01:00
Eric Blake
e67ae61991 build: avoid close, system
* src/fdstream.c (virFDStreamOpenFile, virFDStreamCreateFile):
Use VIR_FORCE_CLOSE instead of close.
* tests/commandtest.c (mymain): Likewise.
* tools/virsh.c (editFile): Use virCommand instead of system.
* src/util/util.c (__virExec): Special case preservation of std
file descriptors to child.
2011-01-29 10:36:45 -07:00
Michal Privoznik
30e21374ea virsh: added --all flag to freecell command
This will iterate over all NUMA nodes, showing
free memory for each and sum at the end.
Existing default behavior is not changed.
2011-01-28 15:13:48 -07:00
Wen Congyang
f15cad2916 Force guest suspend at timeout
If the memory of guest OS is changed constantly, the live migration
can not be ended ever for ever.

We can use the command 'virsh migrate-setmaxdowntime' to control the
live migration. But the value of maxdowntime is diffcult to calculate
because it depends on the transfer speed of network and constantly
changing memroy size. We need a easy way to control the live migration.

This patch adds the support of forcing guest to suspend at timeout.
With this patch, when we migrate the guest OS, we can specify a
timeout. If the live migration timeouts, auto-suspend the guest OS,
where the migration will complete offline.
2011-01-27 15:30:42 -07:00
Wen Congyang
d183e9d1e8 Show migration progress.
Show migration progress if `migrate --verbose'.
2011-01-27 15:29:24 -07:00
Hu Tao
8e6d9860cd Cancel migration if user presses Ctrl-C when migration is in progress
While migration is in progress and virsh is waiting for its
completion, user may want to terminate the progress by pressing
Ctrl-C. But virsh just exits on user's Ctrl-C leaving migration
in background that user isn't even aware of. It's not reasonable.

This patch changes the behaviour for migration. For other
commands Ctrl-C still terminates virsh itself.
2011-01-27 15:26:20 -07:00
Michal Privoznik
cee47aace1 virsh: require --mac to avoid detach-interface ambiguity
bugfix for https://bugzilla.redhat.com/show_bug.cgi?id=671050

virsh simply refutes to detach-interface in case when multiple
interfaces are attached and --mac is not specified.
2011-01-25 10:47:28 -07:00
Eric Blake
c5b11b3cc4 build: use more gnulib modules for simpler code
* .gnulib: Update to latest, for sigpipe and sigaction modules.
* bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r.
* tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that
gnulib guarantees it.
(SA_SIGINFO): Define for mingw fallback.
* src/util/virterror.c (virStrerror): Simplify, now that gnulib
guarantees the POSIX interface.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check.
(AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
2011-01-18 15:35:41 -07:00
Matthias Bolte
2095dc39af virsh: Use WITH_SECDRIVER_APPARMOR to detect AppArmor support
There is no ENABLE_SECDRIVER_APPARMOR.
2011-01-15 18:52:36 +01:00
Nikunj A. Dadhania
d94a14f89d memtune: Let virsh know the unlimited value for memory tunables
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.

Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
2011-01-14 17:17:27 -07:00
Justin Clift
6935a1e289 virsh: ensure --maximum flag used only with --config for setvcpus 2011-01-13 11:02:59 -07:00
Wen Congyang
2fd1a2525b doc: improve the documentation of desturi
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-01-12 09:52:51 -07:00
Jiri Denemark
0fdd82e66e virsh: Add --force option to update-device 2010-12-23 09:07:17 +01:00
Hu Tao
29f92d64d3 Fix memory leak in virsh 2010-12-22 08:44:23 -07:00
Justin Clift
6f7c6f8c1f virsh: fix a typo in the memtune help description 2010-12-09 01:53:56 +11:00
Justin Clift
e3cb5a26d2 Moved the nodeinfo command to the 'host' help keyword group 2010-12-08 11:24:37 +11:00
Osier Yang
8eb236c5f7 virsh: Remove redundant commands in group domain
"echo" is already in group "virsh", "freecell" and "hostname" are
already in group "host", so remove them from group "domain"

* tools/virsh.c
2010-12-07 08:23:09 -07:00
Eric Blake
c6506ff8e9 build: avoid shadowing devname() on BSD systems
* tools/virsh.c (cmdRunConsole, cmdConsole): Rename problematic
symbol.
Reported by Justin Clift.
2010-12-03 08:26:40 -07:00
Osier Yang
2636f50842 virsh: Remove redundant optional option for cmdHelp
Remove the optional option "group", as cmdHelp should accepts
only one option ("virsh help" supports both command and command
group now, and user rarely uses the options, so it doesn't matter
much for it being longer, :-)

* tools/virsh.c
2010-12-03 08:22:17 -07:00
Osier Yang
30277bb54c virsh: move two commands from domain group to storage pool group
* tools/virsh.c (find-storage-pool-sources-as and find-storage-pool-sources
should't be in command group "Domain Management", move them to group
"Storage Pool".
2010-12-02 16:09:19 -07:00
Osier Yang
84f7b286c2 virsh: Remove using phy as default disk driver in cmdAttachDisk
* tools/virsh.c (virsh shouldn't use 'phy' as the disk driver if
user doesn't specify "--driver", it causes bugs, as not all of
hypervisor driver supports 'phy', and actually hypervisor should
known the correct default disk driver and subdriver, so remove it)
2010-12-01 19:01:06 -07:00
Osier Yang
33e38e7710 virsh: update help for "virsh help help"
As virsh help supports both command and command group now,
update "cmdHelp" to print consite help, (this patch is
increment of "7829052757953023b0826e0293ffe18ed4ab89e9").

And also remove redundant empty line in "vshUsage".

* tools/virsh.c
2010-12-01 09:13:11 -07:00
Justin Clift
270b0b5f2e virsh: remove a badly placed line break in virsh -h output
The output was previously:

    -c | --connect <uri>    hypervisor connection URI
    -r | --readonly         connect readonly
    -d | --debug <num>      debug level [0-5]
    -h | --help             this help
    -q | --quiet            quiet mode
    -t | --timing           print timing information
    -l | --log <file>       output logging to file
    -v | --version[=short]  program version

    -V | --version=long     version and full options

(note the blank line between the --version types)

This patch removes the extra blank line.
2010-12-02 00:28:10 +11:00
Osier Yang
7829052757 virsh: Categorize commands into groups for virsh help
Change the virsh help out. The new output of "virsh help" and
"virsh --help" will be like:

 Secret (help keyword 'secret'):
    secret-define                  define or modify a secret from an XML file
    secret-dumpxml                 secret attributes in XML
    secret-set-value               set a secret value
    secret-get-value               Output a secret value
    secret-undefine                undefine a secret
    secret-list                    list secrets

 Snapshot (help keyword 'snapshot'):
    snapshot-create                Create a snapshot
    snapshot-current               Get the current snapshot
    snapshot-delete                Delete a domain snapshot
    snapshot-dumpxml               Dump XML for a domain snapshot
    snapshot-list                  List snapshots for a domain
    snapshot-revert                Revert a domain to a snapshot

Also support output help information of specified command group, e.g.

% ./tools/virsh help "Network Filter"
 Network Filter (help keyword 'filter'):
    nwfilter-define                define or update a network filter from an XML file
    nwfilter-undefine              undefine a network filter
    nwfilter-dumpxml               network filter information in XML
    nwfilter-list                  list network filters
    nwfilter-edit                  edit XML configuration for a network filter

Each group has a help keyword, e.g.

% ./tools/virsh help filter
 Network Filter (help keyword 'filter'):
    nwfilter-define                define or update a network filter from an XML file
    nwfilter-undefine              undefine a network filter
    nwfilter-dumpxml               network filter information in XML
    nwfilter-list                  list network filters
    nwfilter-edit                  edit XML configuration for a network filter

* tools/virsh.c:
  - introduce new struct "vshCmdGrp" and macros to define the groups.
  - split previous array "commands" into small arrays which are orgnized
    by group
  - changed some functions, e.g. "vshCmdDefSearch"
  - Added new functions, e.g. "vshCmdGrpSearch"
  - commands of each group are in "alphabetical order" now.
  - command groups are in "alphabetical order" now.
  - the commands are categorized with reference of
    http://wiki.libvirt.org/page/VirshHelpV2 (by Justin)
  - the modifications doesn't affect tests

* TODO:
  - doc
2010-11-30 13:35:32 -07:00
Eric Blake
416c09bcc0 maint: prohibit most uses of xmlGetProp
Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.

* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.
2010-11-24 15:23:43 -07:00
Daniel P. Berrange
227ed26614 Fix error handling in virsh when listing storage volumes
virsh was not checking for a error code when listing storage
volumes. So when listing volumes in a pool that was shutoff,
no output was displayed

* tools/virsh.c: Fix error handling when listing volumes
2010-11-23 15:00:35 +00:00
Daniel P. Berrange
4d0350fc38 Remove bogus port handling code in virsh
The "find-storage-pool-sources-as" command takes two arguments,
a hostname and a port number. For some reason the code would
also then look for a port number appended to the hostname
string by searching for ':'. This totally breaks if the user
gives an IPv6 address, and is redundant, since you can already
provide a port as a separate argument

* tools/virsh.c: Remove bogus port number handling code
2010-11-23 15:00:35 +00:00
Daniel P. Berrange
9a7caeffdf Allow iSCSI IQN to be set with find-storage-pool-sources-as command
Allow an iSCSI initiator IQN to be set with the XML for the
find-storage-pool-sources-as virsh command

* tools/virsh.c: Add iSCSI IQN support
2010-11-23 15:00:35 +00:00
Daniel P. Berrange
1bae28e49b Switch the virsh XML generation to use virBuffer instead of virAsprintf
The code generating XML for storage pool source discovery is
hardcoded to only allow a hostname and optional port number.
Refactor this code to make it easier to add support for extra
parameters.

* tools/virsh.c: Refactor XML generator
2010-11-23 15:00:34 +00:00
Eric Blake
e8aba782e7 maint: avoid remaining sprintf uses
* cfg.mk (sc_prohibit_sprintf): New rule.
(sc_prohibit_asprintf): Avoid false positives.
* docs/hacking.html.in (Printf-style functions): Document the
policy.
* HACKING: Regenerate.
* .x-sc_prohibit_sprintf: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* src/vbox/vbox_tmpl.c (vboxStartMachine, vboxAttachUSB): Use
virAsprintf instead.
* src/uml/uml_driver.c (umlOpenMonitor): Use snprintf instead.
* tools/virsh.c (cmdDetachInterface): Likewise.
* src/security/security_selinux.c (SELinuxGenSecurityLabel):
Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineCmd): Likewise,
and ensure large enough buffer.
2010-11-17 10:13:12 -07:00
Eric Blake
981d2cdab4 maint: improve i18n on non-Linux
Per the gettext developer:
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00019.html
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00021.html

gettext() doesn't work correctly on all platforms unless you have
called setlocale().  Furthermore, gnulib's gettext.h has provisions
for setting up a default locale, which is the preferred method for
libraries to use gettext without having to call textdomain() and
override the main program's default domain (virInitialize already
calls bindtextdomain(), but this is insufficient without the
setlocale() added in this patch; and a redundant bindtextdomain()
in this patch doesn't hurt, but serves as a good example for other
packages that need to bind a second translation domain).

This patch is needed to silence a new gnulib 'make syntax-check'
rule in the next patch.

* daemon/libvirtd.c (main): Setup locale and gettext.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/parthelper.c (main): Likewise.
* tools/virsh.c (main): Fix exit status.
* src/internal.h (DEFAULT_TEXT_DOMAIN): Define, for gettext.h.
(_): Simplify definition accordingly.
* po/POTFILES.in: Add src/storage/parthelper.c.
2010-11-17 10:12:57 -07:00
Eric Blake
0d5f54bb21 maint: use gnulib configmake rather than open-coding things
* bootstrap.conf (gnulib_modules): Add configmake.
* daemon/Makefile.am (libvirtd_CFLAGS): Drop defines provided by
gnulib.
* src/Makefile.am (INCLUDES): Likewise.
* tests/Makefile.am (INCLUDES): Likewise.
* tools/Makefile.am (virsh_CFLAGS): Likewise.
* daemon/libvirtd.c (qemudInitPaths, usage, main): Update
clients.
* src/cpu/cpu_map.c (CPUMAPFILE): Likewise.
* src/driver.c (DEFAULT_DRIVER_DIR): Likewise.
* src/internal.h (_): Likewise.
* src/libvirt.c (virInitialize): Likewise.
* src/lxc/lxc_conf.h (LXC_CONFIG_DIR, LXC_STATE_DIR, LXC_LOG_DIR):
Likewise.
* src/lxc/lxc_conf.c (lxcCapsInit, lxcLoadDriverConfig):
Likewise.
* src/network/bridge_driver.c (NETWORK_PID_DIR)
(NETWORK_STATE_DIR, DNSMASQ_STATE_DIR, networkStartup): Likewise.
* src/nwfilter/nwfilter_driver.c (nwfilterDriverStartup):
Likewise.
* src/qemu/qemu_conf.c (qemudLoadDriverConfig): Likewise.
* src/qemu/qemu_driver.c (qemudStartup): Likewise.
* src/remote/remote_driver.h (LIBVIRTD_PRIV_UNIX_SOCKET)
(LIBVIRTD_PRIV_UNIX_SOCKET_RO, LIBVIRTD_CONFIGURATION_FILE)
(LIBVIRT_PKI_DIR): Likewise.
* src/secret/secret_driver.c (secretDriverStartup): Likewise.
* src/security/security_apparmor.c (VIRT_AA_HELPER): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/storage_backend_disk.c (PARTHELPER): Likewise.
* src/storage/storage_driver.c (storageDriverStartup): Likewise.
* src/uml/uml_driver.c (TEMPDIR, umlStartup): Likewise.
* src/util/hooks.c (LIBVIRT_HOOK_DIR): Likewise.
* tools/virsh.c (main): Likewise.
* docs/hooks.html.in: Likewise.
2010-11-17 08:58:58 -07:00
Stefan Berger
8e3051af84 replace last instances of close()
I am replacing the last instances of close() I found with VIR_CLOSE() / VIR_FORCE_CLOSE respectively.

The first part patches virsh, which I missed out on previously.

The 2nd patch I had left out intentionally to look at it more carefully:
The 'closed' variable could be easily removed since it wasn't used anywhere else. The possible race condition that could result from the filedescriptor being closed and not set to -1 (and possibly let us write into 'something' totally different if the fd was allocated by another thread) seems to be prevented by the qemuMonitorLock() already placed around the code that reads from or writes to the fd. So the change of this code as shown in the patch should not have any side-effects.
2010-11-17 10:19:13 -05:00
Osier Yang
21f5283328 virsh: add net-info command
To list basic information about the network.

* tools/virsh.c
* tools/virsh.pod
2010-11-16 09:18:06 -07:00
Daniel P. Berrange
a926156792 Fix reference counting bug in virsh console
The event watches need to be removed before the event loop
terminates, otherwise they cause a dangling reference to
be held on the virStreamPtr, which in turns holds a reference
on virConnectPtr, which in turn causes errors like

  "Failed to disconnect from the hypervisor"

* tools/console.c: Remove watches before event loop quits
* tools/virsh.c: Print out dangling reference count
2010-11-11 16:03:36 +00:00
Daniel P. Berrange
dad4b5d47f Re-write virsh console to use streams
This re-writes the 'virsh console' command so that it uses
the new streams API. This lets it run remotely and/or as a
non-root user. This requires that virsh be linked against
the simple event loop from libvirtd in daemon/event.c
As an added bonus, it can now connect to any console device,
not just the first one.

* tools/Makefile.am: Link to event.c
* tools/console.c, tools/console.h: Rewrite to use the
  virDomainOpenConsole() APIs with streams
* tools/virsh.c: Support choosing the console name
  via --devname $NAME
2010-11-11 16:03:20 +00:00
Eric Blake
51c83a2b1a virsh: supply long option for -V
* tools/virsh.c (vshParseArgv): Use NULL instead of 0 for pointer,
and symbolic names for has_arg.  Give --version an optional arg.
(vshUsage): Document this.
* tools/virsh.pod: Likewise.
2010-11-10 16:57:40 -07:00
Laine Stump
ff4a31d969 virsh: fix non-literal string format
These are in the newly added -V output.
2010-11-09 17:37:05 -05:00
Stefan Berger
60ae1c34ad bye to close(), welcome to VIR_(FORCE_)CLOSE()
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
2010-11-09 15:48:48 -05:00
Jiri Denemark
fb76151c28 virsh: Add .xml suffix to tmp files used in *edit commands
This helps editors with detecting the temporary files as XML since the
temporary files do not contain <?xml ...?> declaration.

Requested by https://bugzilla.redhat.com/show_bug.cgi?id=602277
2010-11-09 13:42:54 +01:00
Daniel Veillard
5879c15dfd Show compiled in options in virsh -V
To ease debugging this trivial patch allows to find what was compiled
in in the local version of libvirt, this doesn't work for remote access
but that's probably sufficient. With the patch I get on my machine:

paphio:~/libvirt/tools -> ./virsh -V
Virsh command line tool of libvirt 0.8.4
See web site at http://libvirt.org/

Compiled with support for:
 Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test
 Networking: Remote Daemon Network Bridging Netcf Nwfilter
 Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
 Miscellaneous: SELinux Secrets Debug Readline
paphio:~/libvirt/tools ->

* tools/virsh.c: add -V option
* tools/virsh.pod: document the extension
2010-11-09 12:01:33 +01:00
Justin Clift
c690cf831d virsh: fix incorrect help text mentioning non-existent network 'id' 2010-11-09 01:35:27 +11:00
Chris Lalancette
a5b5307da2 Implement virsh qemu-monitor-command.
Now that the virsh parsing has been revamped, we can
implement qemu-monitor-command.  This is basically the same
as it was in previous iterations, but has now been tested to
work both with the plain text monitor and the QMP monitor.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-11-05 12:14:21 -04:00
Justin Clift
3fb71895e8 virsh: improve the help description for managedsave and start
Updated the descriptions for managedsave and start in virsh and
the virsh man page, and also for managedsave-remove in the virsh
man page.
2010-10-29 11:52:31 +11:00
Eric Blake
bac73e7f68 virsh: use - not _ in memtune option names
* tools/virsh.c (opts_memtune): All other options in virsh use -
for separating words.
2010-10-26 15:55:12 -06:00
Eric Blake
009035ffad virsh: fix range of memtune command
* tools/virsh.c (cmdMemtune): Use long long for memory
sizes. Simplify allocation, and plug memory leak.
2010-10-26 09:31:42 -06:00
Eric Blake
c1564268c4 virsh: improve help text where integers are expected
* tools/virsh.c (opts_freecell, opts_memtune, opts_vcpupin)
(opts_setvcpus, opts_setmaxmem, opts_setmem)
(opts_migrate_setmaxdowntime): Use VSH_OT_INT when only an integer
is expected.
(vshCmddefHelp, vshCmddefGetData): Allow mandatory VSH_OT_INT
arguments.
2010-10-26 09:31:42 -06:00
Osier Yang
1a29a14a2f virsh: Add option 'model' for attach-interface
* tools/virsh.c: add missing option from the CLI to allows setting
  up the NIC model type when attaching an interface
* tools/virsh.pod: extend documentation
* AUTHORS: add Osier Yang to the list
2010-10-26 10:36:40 +02:00
Matthias Bolte
076cf3a0bd virsh: Don't read nparams when virDomainGetMemoryParameters fails
Also exit early when nparams is 0.
2010-10-20 19:33:11 +02:00
Matthias Bolte
916f95b7aa Rename VIR_DOMAIN_SWAP_HARD_LIMIT to VIR_DOMAIN_MEMORY_SWAP_HARD_LIMIT
To get them under the common VIR_DOMAIN_MEMORY_* prefix.
2010-10-20 19:33:11 +02:00
Eric Blake
bf945ee97b vcpu: add virsh support
* tools/virsh.c (cmdSetvcpus): Add new flags.  Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.
2010-10-19 10:06:11 -06:00
Nikunj A. Dadhania
0a22f54248 memtune: Add min_guarantee to the virsh memtune command
* tools/virsh.c: Add new memory tunable "min_guarantee", currently only
  ESX can use this
* tools/virsh.pod: Update the manpage
2010-10-19 14:45:35 +02:00