Commit Graph

136 Commits

Author SHA1 Message Date
Ján Tomko
e73889b631 Split out -Wframe-larger-than warning from WARN_CLFAGS
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.

Raising the limit for tests allows building them with clang
with optimizations disabled.
2017-04-06 12:29:35 +02:00
Michal Privoznik
fd81eb7c48 daemon: Install virt-guest-shutdown.target properly
When trying to install libvirtd from sources I've noticed the
following failure:

/usr/bin/install: cannot stat 'virt-guest-shutdown.target': No such file or directory
Makefile:2792: recipe for target 'install-init-systemd' failed
make[3]: *** [install-init-systemd] Error 1
make[3]: *** Waiting for unfinished jobs....

The problem is that while other files around that location in
Makefile are firstly generated into the builddir and only after
that installed, virt-guest-shutdown.target file is not generated
at all and should be installed from the srcdir.

This was introduced in 01079727.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-11-29 16:31:52 +01:00
Nikolay Shirokovskiy
01079727fe libvirtd: systemd: add special target for system shutdown
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].

Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:

libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.

This way domains are decoupled from specific shutdown service via intermediate
target.

[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
2016-11-23 11:13:53 +03:00
Andrea Bolognani
49ba028aed build: Replace variables in man pages
We can't use eg. @sysconfdir@ directly in the .pod file, because
pod2man(1) will interpret that as a variable name and format it
accordingly.

Instead, we use eg. SYSCONFDIR and use a subsequent sed(1) call
to turn it into the expected @sysconfdir@.
2016-04-25 15:40:44 +02:00
Andrea Bolognani
7351f7fe68 build: Group files
Define $(PODFILES) and $(MANINFILES) so that adding a new man
page only requires changes in a few, well defined spots.
2016-04-25 15:40:44 +02:00
Andrea Bolognani
5b479f3b5b build: Standardize on .pod -> .x.in -> .x
After this commit, all man pages are generated using the same two
steps:

  1. Process a source $command.pod file with pod2man(1) to obtain
     a valid man page in $command.$section.in

  2. Process $command.$section.in with sed(1) to obtain the final
     man page in $command.$section
2016-04-25 15:40:44 +02:00
Andrea Bolognani
90709d8d22 build: Build man pages in $(builddir)
No file should be created inside $(srcdir) during build.
2016-04-25 15:40:43 +02:00
Cole Robinson
3b9100a4d2 Revert "daemon: use socket activation with systemd"
This reverts commit 1e9808d3a1.

We shouldn't advertise libvirtd.socket activation, since currently
it means VM/network/... autostart won't work as expected.

We tried to find a middle ground by installing the config file without
an [Install] section, since systemd won't allow .socket to be enabled
without one... or at least it did do that; presently on f24 it allows
activating the socket quite happily. This also caused user confusion[1]

Just remove the socket file. I've filed a new RFE to track coming up
with a solution to the autostart problem[2], we can point users at that
if there's more confusion:

[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1279348
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1326136
2016-04-20 08:53:38 -04:00
Maxim Nestratov
30c61901c8 vz: build driver as module and don't register it on client's side
Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon

Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
2016-04-13 18:48:43 +03:00
Erik Skultety
1a07c2efb3 admin: Introduce adminDaemonConnectListServers API
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-17 12:46:34 +01:00
Erik Skultety
159a37f659 admin: Move admin_server.{h,c} to admin.{h,c}
This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.

Best viewed with -M.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-17 12:46:34 +01:00
Guido Günther
6d71d54812 daemon: Use $(NULL) for libvird_admin's flags
This makes it consistent with the other FLAGS in this file and reduced
clutter in the diff when adding new entries.
2015-08-20 10:19:27 +02:00
Martin Kletzander
7868f01783 admin: Tiny cleanups
First hunk changes the use of srcdir to top_srcdir so it complies with
other rules in the Makefile.  Second one removes the need of
remote_protocol.h in admin_protocol.h as it was suggested and worked in,
but this one line was missed apparently.  Last one just removes the
'remote' naming from admin protocol specification, just so it's cleaner.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-07-27 09:33:24 +02:00
Michal Privoznik
13e5ea8bd9 daemon: Don't just include admin RPC
So, it's a little paradox that we use the file twice. Firstly to build
libvirt-admin.la (a client side of the Admin API), then once again to
build the server side. Well, the problem is, this does not play nicely
with the distclean since the file is generated. So while it's removed
in the src/ the distclean running in daemon/ will not find the file
and fail. The file is needed because it contains the RPC wrappers. So
let's leave the client code as is and from the daemon/ just link the
client library. The linker will find desired symbols and use them.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 09:27:47 +02:00
Michal Privoznik
297e18f42b daemon: Distribute admin_server.h
The Admin API consists of a few files on daemon side. Notably
daemon/admin_server.{ch}. While they are both on the repo, only
the .c file is mentioned in Makefile. Therefore, .h is not
distributed and 'make rpm' fails.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-17 14:22:23 +02:00
Michal Privoznik
c132b1b6e6 daemon/Makefile: Add forgotten dependency
In latest patches we added Admin API. However, the Makefile in daemon
was missing one dependency: admin_server.c is including generated file
admin_dispatch.h. However, this dependency was not explicitly marked
in the Makefile therefore the build happened to fail on some
occasions.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-16 18:11:17 +02:00
Martin Kletzander
d5f4241bbc Add support for admin API in libvirt daemon
For this to pe properly separated from other protocols used by the
server, there is second server added which allows access to the whole
virNetDaemon to its clients.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-16 13:46:21 +02:00
Jim Fehlig
77664cb406 libxl: add logrotate config file
Add logrotate config for log files in /var/log/libvirt/libxl.
2015-05-05 09:08:11 -06:00
Cole Robinson
e94979e901 polkit: Allow password-less access for 'libvirt' group
Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.

Let's finally add official support for this.

Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install

https://bugzilla.redhat.com/show_bug.cgi?id=957300
2015-05-04 12:57:06 -04:00
Michal Privoznik
f58a3a51fc Cleanup srcdir usage
In a lot places we use path like this:

  $(srcdir)/../src/....

when in fact it can be:

  $(top_srcdir)/src/

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-04-27 16:03:31 +02:00
Jiri Denemark
0c68ec7d78 daemon: Prefix sysctl configuration filename with a number
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.

https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-04-16 14:39:38 +02:00
Daniel P. Berrange
c754257347 Convert remote daemon & acl code to use polkit API
Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-24 15:29:22 +01:00
Martin Kletzander
1e9808d3a1 daemon: use socket activation with systemd
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-22 09:12:14 +02:00
Laine Stump
00e9d6071b build: add $(prefix) to SYSTEMD_UNIT_DIR
I noticed this problem when adding systemd support to netcf, because I
setup the configure.ac to automatically prefer using systemd over
initscripts when possible - although I had copied the
install-data-local target from the example of libvirt's
"libvirt-guests" service more or less verbatim, "make distcheck" would
fail because it was trying to install the service file directly into
/lib/systemd/system rather than into
/home/user/some/unimportant/name/lib/systemd/system.

This is caused by the install/uninstall rules for the systemd unit
files relying on $(DESTDIR) pointing the installed files to the right
place, but in reality $(DESTDIR) is empty during this part of make
distcheck - it instead sets $(prefix) with the toplevel directory used
for its test build/install/uninstall cycle.

(This problem hasn't been seen when running "make distcheck" in
libvirt because libvirt will never build/install systemd support
unless explicitly told to do so on the configure commandline, and
"make distcheck" doesn't put the "--with-initscript=..." option on the
configure commandline.)

I verified that the same problem does exist in libvirt by modifying
libvirt's configure.ac to set:

  init_systemd=yes
  with_init_script=systemd+redhat

This forces a build/install of the systemd unit files during
distcheck, which yields an error like this:

/usr/bin/install -c -m 644 virtlockd.service \
  /lib/systemd/system/
libtool: install: warning: relinking `libvirt-qemu.la'
/usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied
make[4]: *** [install-systemd] Error 1

After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR,
make distcheck now completes successfully with the modified
configure.ac, and the above lines change to something like this:

/usr/bin/install -c -m 644 virtlockd.service \
  /home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
2014-01-21 13:19:46 +02:00
Daniel P. Berrange
3e2f27e13b Don't link virt-login-shell against libvirt.so (CVE-2013-4400)
The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.

The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.

Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-21 14:03:52 +01:00
Eric Blake
8f34f195d0 build: fix use of rpc.h on cygwin
Caused by commit 012c25e8 splitting out a convenience library.

  CC       libvirtd_conf_la-libvirtd-config.lo
In file included from ../src/rpc/virnetmessage.h:24:0,
                 from ../src/rpc/virnetserverprogram.h:27,
                 from ../src/rpc/virnetserver.h:32,
                 from libvirtd-config.c:31:
../src/rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file
or directory

* daemon/Makefile.am (libvirtd_conf_la_CFLAGS): Add XDR_CFLAGS.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-26 15:14:38 -06:00
Eric Blake
012c25e88c build: use library rather than cross-directory compilation
If we use subdir-objects with automake, any reference to a
cross-directory .c file will result in automake creating
rules that track dependency in the cross directory.  But this
presents a problem during 'make distclean' - if the cross
directory is cleaned up first, then the daemon directory will
be left with dangling references to .Po dependency files that
no longer exist.

Meanwhile, referring to the cross-directory .c file means
that we are compiling the file twice - once in src, and once
in daemon.  Better is to compile just once in src into a
convenience library, and then use that library from daemon.

The tests directory had a similar situation of a cross-directory
.c file; to solve that, we actually need a convenience library.

* daemon/Makefile.am (DAEMON_SOURCES): Drop .c files...
(libvirtd_LDADD): ...and instead use library.
(libvirtd_conf_la_SOURCES): Declare a new convenience library.
(libvirtd_LDFLAGS): Drop duplicate flag.
* tests/Makefile.am (libvirtdconftest_SOURCES): Drop .c file...
(libvirtdconftest_LDADD): ..and instead use library.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-09 12:04:03 -06:00
Eric Blake
073e157533 build: avoid $(srcdir) in *_SOURCES
Trying to enable automake's subdir-objects option resulted in
the creation of literal directories such as src/$(srcdir)/remote/.
I traced this to the fact that we had used a literal $(srcdir)
in a location that later fed an automake *_SOURCES variable.
This has also been reported as an automake bug:
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928
but it's better to fix our code than to wait for an automake fix.

Some things to remember that affect VPATH builds, and where an
in-tree build is blissfully unaware of the issues: if a VPATH
build fails to find a file that was used as a prereq of any
other target, then the rule for that file will expand $@ to
prefer the current build dir (bad because a VPATH build on a
fresh checkout will then stick $@ in the current directory
instead of the desired srcdir); conversely, if a VPATH build
finds the file in srcdir but decides it needs to be rebuilt,
then the rule for that file will expand $@ to include the
directory where it was found out-of-date (bad for an explicit
listing of $(srcdir)/$@ because an incremental VPATH build will
then expand srcdir twice).  As we want these files to go into
srcdir unconditionally, we have to massage or avoid $@ for any
recipe that involves one of these files.

Therefore, this patch removes all uses of $(srcdir) from any
generated file name that later feeds a *_SOURCES variable, and
then rewrites all the recipes to generate those files to
hard-code their creation into srcdir without the use of $@.

* src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH
builds know how to find the files, and automake subdir-objects
fails with it in place.
(LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED)
(ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise.
(*_client_bodies.h): Hard-code rules to write into srcdir, as
VPATH tries to build $@ locally if missing.
(util/virkeymaps.h): Likewise.
(lxc/lxc_monitor_dispatch.h): Likewise.
(access/viraccessapi*): Likewise.
(locking/lock_daemon_dispatch_stubs.h): Likewise.
* daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h):
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>

fixup DAEMON_GENERATED
2013-09-09 12:04:03 -06:00
Eric Blake
ec81852f46 build: enforce makefile conditional style
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO

An example error message when using the wrong name:

daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE

As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.

Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.

* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-04 09:40:20 -06:00
Guido Günther
3e2799add2 Check for --no-copy-dt-needed linker flag
and use it when available
2013-08-22 16:17:36 +02:00
Guido Günther
d9527b6d56 Simplify RELRO_LDFLAGS
by adding it to AM_LDFLAGS instead of every linking rule and
by avoiding a forked grep.
2013-08-22 16:17:35 +02:00
Eric Blake
d21d40bf0c maint: split long lines in Makefiles
Makefiles are another easy file to enforce line limits.

Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression

* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-19 05:25:35 -06:00
Daniel P. Berrange
ed3bac713c Setup default access control manager in libvirtd
Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-06-24 15:24:36 +01:00
Eric Blake
d7f53c7b97 maint: use LGPL correctly
Several files called out COPYING or COPYING.LIB instead of using
the normal boilerplate.  It's especially important that we don't
call out COPYING from an LGPL file, since COPYING is traditionally
used for the GPL.  A few files were lacking copyright altogether.

* src/rpc/gendispatch.pl: Add missing copyright.
* Makefile.nonreentrant: Likewise.
* src/check-symfile.pl: Likewise.
* src/check-symsorting.pl: Likewise.
* src/driver.h: Likewise.
* src/internal.h: Likewise.
* tools/libvirt-guests.sh.in: Likewise.
* tools/virt-pki-validate.in: Mention copyright in comment, not just code.
* tools/virt-sanlock-cleanup.in: Likewise.
* src/rpc/genprotocol.pl: Spell out license terms.
* src/xen/xend_internal.h: Likewise.
* src/xen/xend_internal.c: Likewise.
* Makefile.am: Likewise.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* docs/schemas/Makefile.am: Likewise.
* examples/apparmor/Makefile.am: Likewise.
* examples/domain-events/events-c/Makefile.am: Likewise.
* examples/dominfo/Makefile.am: Likewise.
* examples/domsuspend/Makefile.am: Likewise.
* examples/hellolibvirt/Makefile.am: Likewise.
* examples/openauth/Makefile.am: Likewise.
* examples/python/Makefile.am: Likewise.
* examples/systemtap/Makefile.am: Likewise.
* examples/xml/nwfilter/Makefile.am: Likewise.
* gnulib/lib/Makefile.am: Likewise.
* gnulib/tests/Makefile.am: Likewise.
* include/Makefile.am: Likewise.
* include/libvirt/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* python/tests/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
* configure.ac: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-20 14:03:48 -06:00
Jiri Denemark
4734f1f53b Fix build with VirtualBox
Commit ba5f3c7c moved vbox driver into libvirtd but forgot to adapt
daemon's Makefile.am.
2013-05-16 23:01:43 +02:00
Daniel P. Berrange
71b54636f0 Don't duplicate compiler warning flags when linking
Automake already passes all CFLAGS to the linker too, so it
is not necessary to set WARN_LDFLAGS in addition to the
WARN_CFLAGS variable.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-14 15:02:37 +01:00
Daniel P. Berrange
6da982be65 Cleanup command line options in gendispatch.pl
There are many declared options in gendispatch.pl that were
no longer used. Those which were used were obscure '-b', '-k'
and '-d'. Switch to use --mode={debug|client|server}.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:32:59 +01:00
Daniel P. Berrange
fc8c1787d8 Enable full RELRO mode
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-03 16:19:35 +01:00
Daniel P. Berrange
1150999ca4 Build all binaries with PIE
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-03 16:19:35 +01:00
Jiri Denemark
b8a32e0e94 build: Regenerate man pages on version bump
Whenever libvirt version changes in configure.ac, we need to regenerate
man pages so that they contain correct version info.
2013-01-29 13:23:19 +01:00
Daniel P. Berrange
509eb51e7c Implement the RPC protocol for the libvirt-lxc.la library
Add the infrastructure for the libvirt-lxc.la library to
the remote protocol client and daemon

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-15 18:16:53 +00:00
Daniel P. Berrange
cf7ac00ebd Rename HAVE_POLKIT to WITH_POLKIT 2013-01-14 13:29:55 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Eric Blake
7cc522beb6 maint: distribute libvirtd.service.in
I did a build --without-libvirtd, then ran 'make dist'.  The
resulting tarball was broken, with a complaint that make did not
know how to create libvirtd.service.in.  I traced it to a use
of EXTRA_DIST inside a conditional.

* daemon/Makefile.am (EXTRA_DIST): Hoist libvirtd.service.in
outside of WITH_LIBVIRTD conditional.
2013-01-09 14:36:25 -07:00
Eric Blake
a1fd56cb30 build: install libvirt sysctl file correctly
https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl.  Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.

* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.
2013-01-07 08:56:37 -07:00
Eric Blake
5ec4b22b77 build: .service files don't need to be executable
See also commit 66ff2dd, where we avoided installing these files
as executables.

* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
2013-01-07 08:56:36 -07:00
Eric Blake
462a69621e build: use common .in replacement mechanism
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.

Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).

Fix all of these uses to follow the same syntax.

* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
2013-01-07 08:56:36 -07:00
Eric Blake
2639949abe build: check for pod errors
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273

* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
2012-10-26 15:13:39 -06:00
Cole Robinson
e1019e9e84 Only keep one polkit rules file
Just tweak it at build time depending on what polkit version we are
building for.
2012-10-14 15:21:18 -04:00
Cole Robinson
0801c14908 daemon: Use $(AM_V_GEN) in a few more places 2012-10-14 13:35:17 -04:00