Commit Graph

519 Commits

Author SHA1 Message Date
Daniel P. Berrange
2e56cfa7d2 Include port number with virtio serial devices
To ensure that the device addressing scheme is stable across
hotplug/unplug, all virtio serial channels needs to have an
associated port number in their address. This is then specified
to QEMU using the nr=NNN parameter

* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
  for port number in vioserial address types.
* src/qemu/qemu_conf.c: Set 'nr=NNN' parameter with virtio
  serial port number
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Expand
  data set to ensure coverage of port addressing
2010-06-08 15:08:15 +01:00
Cole Robinson
953809dbe4 xen: Fix chardev listen sexpr formatting
'listen' isn't a valid qemu-dm option, as reported a long time ago here:

https://bugzilla.redhat.com/show_bug.cgi?id=492958

Matches the near identical logic in qemu_conf.c

v2: When parsing sexpr, only match on ",server", rather than
    full ',server,nowait'.
2010-05-27 14:26:05 -04:00
Jim Meyering
572c6cc10a tests: avoid new failure of the daemon-conf test
* tests/daemon-conf: Accommodate the fact that out template,
daemon/libvirtd.conf now contains an invalid host_uuid.
Convert it to a valid one before the final libvirtd-running
test that must terminate normally.
2010-05-25 15:53:19 -06:00
Stefan Berger
a8f75d2c7d vepa: parsing for 802.1Qb{g|h} XML
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)
2010-05-25 17:37:00 -04:00
Cole Robinson
a7fb2258ca storage: Sanitize pool target paths
Spurious / in a pool target path makes life difficult for apps using the
GetVolByPath, and doing other path based comparisons with pools. This
has caused a few issues for virt-manager users:

https://bugzilla.redhat.com/show_bug.cgi?id=494005
https://bugzilla.redhat.com/show_bug.cgi?id=593565

Add a new util API which removes spurious /, virFileSanitizePath. Sanitize
target paths when parsing pool XML, and for paths passed to GetVolByPath.

v2: Leading // must be preserved, properly sanitize path=/, sanitize
    away /./ -> /

v3: Properly handle starting ./ and ending /.

v4: Drop all '.' handling, just sanitize / for now.
2010-05-25 12:30:44 -04:00
Daniel P. Berrange
60881161ea Expose a host UUID in the capabilities XML
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test
2010-05-25 17:09:18 +01:00
Matthias Bolte
9c563e76e8 build: Distribute the whole tests/qemuhelpdata directory
Instead of distributing the individual files.

Now it's less error prone and consistent with the rest of
the data directories in the tests directory.
2010-05-21 20:08:57 +02:00
Chris Lalancette
54971d9170 Domain snapshot RNG and tests.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-05-20 13:50:03 -04:00
Eric Blake
92036c2edf build: distribute missing file
Commit f30ccb2458 was incomplete.

* .gitignore: Ignore intermediate directory during failed 'make
distcheck'.
* tests/Makefile.am (qemuhelpdata): Distribute new file.
2010-05-19 16:28:49 -06:00
Jim Meyering
6ab131bae2 tests: do not ignore virInitialize failure
* tests/nodeinfotest.c (mymain): Do not ignore virInitialize failure.
Most other callers of virInitialize test for failure.
2010-05-18 19:23:32 +02:00
Jim Meyering
43beb82eca linuxNodeInfoCPUPopulate: avoid used-uninitialized via a test
* tests/nodeinfotest.c (linuxTestCompareFiles): Don't use
nodeinfo->member uninitialized.  linuxNodeInfoCPUPopulate requires
that some of its nodeinfo members (including threads) be initialized
upon input.  The nodeinfotest.c program lacked the initialization,
while the only other use (nodeGetInfo) did perform it.
It's not trivial to move the initialization into the function,
since nodeGetInfo sets at least one member after clearing the
buffer but before calling linuxNodeInfoCPUPopulate.
2010-05-18 19:23:32 +02:00
Eric Blake
f30ccb2458 qemu_conf: fix flag value
(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000

Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).

Fixes Red Hat BZ#592070

* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.
2010-05-17 16:28:02 -06:00
Cole Robinson
df5944ff02 tests: Skip daemon-conf test if dir exceeds UNIX_PATH_MAX
The max path length for unix sockets is pretty small (108, see man 7 unix).
If 'make check' is run from a directory that exceeds this, one of the tests
will fail, and in such a way that requires manually editting the test to
determine why.

There are certainly other ways to handle this, but I've chosen just to skip
the offending test if we will exceed the length limitation.

v2: Drop bashism, use test infrastructure to warn and skip
2010-05-17 15:01:59 -04:00
Jim Meyering
c2c4abb43b tests: use GPLv2+, not GPLv3
* tests/cpuset: Change from GPLv3 to GPLv2+
* tests/read-bufsiz: Likewise.
* tests/read-non-seekable: Likewise.
* tests/start: Likewise.
* tests/undefine: Likewise.
* tests/vcpupin: Likewise.
* tests/virsh-all: Likewise.
* tests/virsh-schedinfo: Likewise.
* tests/virsh-synopsis: Likewise.
2010-05-12 08:41:10 +02:00
Jim Meyering
e915962a04 tests: correct PATH in new test, for when running manually
* tests/virsh-schedinfo: This test sets PATH internally, just in
case you're running it manually.  Normally, the PATH setting from
tests/Makefile.am's TESTS_ENVIRONMENT is sufficient.  Prepend the
correct directory, and take advantage of the PATH setting in one
more case.
2010-05-11 18:01:11 +02:00
Jim Meyering
c5be8bcb8f tests: adjust copyrights on scripts: s/FSF/Red Hat/
* tests/cpuset: Change copyright holder from FSF to Red Hat, Inc.
* tests/read-bufsiz: Likewise.
* tests/read-non-seekable: Likewise.
* tests/start: Likewise.
* tests/undefine: Likewise.
* tests/vcpupin: Likewise.
* tests/virsh-all: Likewise.
* tests/virsh-synopsis: Likewise.
2010-05-11 16:43:07 +02:00
Jim Meyering
9a641564fb virsh: schedinfo --set invalid=value would simply ignore the option
For example, virsh -c test:///default schedinfo 1 --set P=k would
mistakenly exit successfully, giving no indication that it had failed
to set the scheduling parameter "P".
* tools/virsh.c (cmdSchedinfo): Diagnose an invalid --set j=k option,
rather than silently ignoring it.
* tests/virsh-schedinfo: New test for the above.
* tests/Makefile.am (test_scripts): Add it.
Reported by Jintao Yang in http://bugzilla.redhat.com/586632
2010-05-11 16:37:15 +02:00
Stefan Berger
aea68ce906 nwfilter: add support for RAPR protocol
This patch adds support for the RARP protocol. This may be needed due to
qemu sending out a RARP packet (at least that's what it seems to want to
do even though the protocol id is wrong) when migration finishes and
we'd need a rule to let the packets pass.

Unfortunately my installation of ebtables does not understand -p RARP
and also seems to otherwise depend on strings in /etc/ethertype
translated to protocol identifiers. Therefore I need to pass -p 0x8035
for RARP. To generally get rid of the dependency of that file I switch
all so far supported protocols to use their protocol identifier in the
-p parameter rather than the string.

I am also extending the schema and added a test case.

changes from v1 to v2:
- added test case into patch
2010-04-27 07:26:12 -04:00
David Allan
1b9347b5f1 Fix indentation for storage conf XML
* virStorageEncryptionFormat is called from both
  virDomainDiskDefFormat and virStorageVolTargetDefFormat.  The proper
  indentation in the generated XML depends on the caller.  My earlier
  patch to fix the incorrect indentation for the domain XML broke the
  indentation for the storage XML.  This patch adopts Laine's
  suggestion of requring the caller of virStorageEncryptionFormat to
  provide an unsigned int with the number of spaces the output should
  be indented.  The patch modifies both callers to provide the
  additional argument.

* Add a regression test for the domain XML

* src/conf/domain_conf.c src/conf/storage_conf.c
  src/conf/storage_encryption_conf.c src/conf/storage_encryption_conf.h:
  change the indentation code
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.xml: add a regression test
2010-04-27 12:01:32 +02:00
Stefan Berger
5c7c755f50 nwfilter: enable hex number inputs in filter XML
With this patch I want to enable hex number inputs in the filter XML. A
number that was entered as hex is also printed as hex unless a string
representing the meaning can be found.

I am also extending the schema and adding a test case. A problem with
the DSCP value is fixed on the way as well.

Changes from V1 to V2:

- using asHex boolean in all printf type of functions to select the
output format in hex or decimal format
2010-04-26 13:50:40 -04:00
Stefan Berger
9db01465e5 nwfilter: extend schema + add testcase w/ connlimit-above
I am extending the schema with the recently added connlimit-above
attribute and adding a test case for it to the test suite.
2010-04-23 11:42:39 -04:00
Eric Blake
2788f4d1d4 testutilsqemu: avoid uninitialized variable
* tests/testutilsqemu.c (testQemuCapsInit): Initialize variables.
2010-04-22 09:00:30 -06:00
Jiri Denemark
b34e082079 Fake host CPU for qemu tests 2010-04-22 10:21:05 +02:00
Matthias Bolte
1d8099f4b6 esx: Fix virtualHW.version generation
The supported virtualHW.version doesn't depend on the API version,
but on the product version.
2010-04-21 00:37:46 +02:00
Matthias Bolte
c6375aa796 esx: Add support for the VMXNET 2 (Enhanced) NIC model
Add a test case and document it.
2010-04-20 20:58:24 +02:00
Eric Blake
5e06ef743a virt-aa-helper-test: avoid non-portable echo -n
* tests/virt-aa-helper-test (testme): Use printf instead.
2010-04-14 11:17:18 -06:00
Jim Meyering
ad896a1cdd schematestutils.sh: improve shell portability: avoid "echo -e"
* tests/schematestutils.sh: Use printf rather than echo -e.
2010-04-14 17:34:12 +02:00
Daniel P. Berrange
e7ebe9f357 Fix nodeinfotest on NUMA machines
The nodeinfotest was reliant on the host NUMA topology, but all
the test data files assumed 1 single NUMA node. This test thus
failed on any NUMA machine with > 1 node

* tests/nodeinfotest.c: Hardcode 1 single numa node
2010-04-13 15:50:07 +01:00
David Allan
cddd3ac8b0 Add enospace option to qemu disk error policy
* Dan Kenigsberg requested explicit support for the qemu default disk error policy which is enospace
2010-04-09 03:35:47 -04:00
Stefan Berger
b5cc01ef2e nwfilter: More XML parser test cases
This patch adds a couple more nwfilter test cases for the XML parser tests.
2010-04-09 07:25:02 -04:00
Matthias Bolte
1aaa909116 esx: Add domain snapshot support
Fix invalid code generating in esx_vi_generator.py regarding deep copy
types that contain enum properties.

Add strptime and timegm to bootstrap.conf. Both are used to convert a
xsd:dateTime to calendar time.

Add a testcase of the xsd:dateTime conversion.
2010-04-08 21:54:43 +02:00
Matthias Bolte
4acab37f56 esx: Allow 'lsisas1068' as SCSI controller type
Extend tests to cover all SCSI controller types and document the
new type.

The lsisas1068 SCSI controller type was added in ESX 4.0. The VMX
parser reports an error when this controller type is present. This
makes virsh dumpxml fail for every domain that uses this controller
type.

This patch fixes this and adds lsisas1068 to the list of accepted
SCSI controller types.

Reported by Jonathan Kelley.
2010-04-08 12:05:51 +02:00
Stefan Berger
edb9d54bd1 Executable does not belong into repository.
Removing the tests/nwfilterxml2xmltest executable that got in with a previous patch.
2010-04-07 19:52:25 -04:00
Stefan Berger
3bf24abc8c nwfilter: Support for learning a VM's IP address
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple  IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.

So, when for example an interface description in the domain XML has
looked like this up to now:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'>
        <parameter name='IP' value='10.2.3.4'/>
      </filterref>
    </interface>

you may omit the IP parameter:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'/>
    </interface>

Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface  (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.

A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.

* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
  src/nwfilter/nwfilter_ebiptables_driver.[ch]
  src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
2010-04-07 23:12:21 +02:00
Jamie Strandboge
ef962afb74 Update of the apparmore regression tests
* tests/virt-aa-helper-test: test augmented with hostdev and sdl display
  checks
2010-04-06 23:01:24 +02:00
Stefan Berger
8cf0ed02be nwfilter: Add filter schema for nwfilter XML, extend domain XML schema
This patch adds a relaxng nwfilter schema along with a test that
verifies all the test output XML against the schema. The input XMLs
contain a lot of intentional out-of-range values that make them fail the
schema verification, so I am not verifying against those.
2010-04-06 11:09:46 -04:00
Matthias Bolte
6c175fa3d1 Remove virConnectPtr from nodeReportError 2010-04-06 01:47:51 +02:00
Stefan Berger
45274d4121 This patch removes the virConnectPtr parameter from all functions where it's not necessary starting out with removing it as a parameter to the error reporting function. 2010-04-05 12:34:55 -04:00
Chris Lalancette
462c74c38a Snapshot QEMU driver.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-04-05 10:24:51 -04:00
Stefan Berger
8459218cbc This patch adds a couple of test cases for the XML parsing test suite covering various filterable protocols. For each test case an input XML and an output XML is provided checking the input XML after parsing and converting back into XML against the exepcted output XML.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-04-02 13:28:28 -04:00
Eric Blake
e7168f7965 build: import latest gnulib
A lot of syntax check rules have to be rewritten, but the
result is easier to maintain.  I tested each syntax rule
by intentionally introducing a temporary violation of the rule.
Additionally, some false positives for unmarked_diagnostics
crept in, and an improved copyright_format test caught some bugs.

* .gnulib: Update to latest.
* cfg.mk (sc_prohibit_test_minus_ao): Delete, it was moved into
gnulib's maint.mk.
(sc_avoid_write, sc_prohibit_strcmp_and_strncmp)
(sc_prohibit_asprintf, sc_prohibit_strncpy, sc_prohibit_readlink)
(sc_prohibit_gethostname, sc_prohibit_gettext_noop)
(sc_prohibit_VIR_ERR_NO_MEMORY, sc_prohibit_nonreentrant)
(sc_prohibit_ctype_h, sc_TAB_in_indentation)
(sc_avoid_ctype_macros)
(sc_prohibit_virBufferAdd_with_string_literal)
(sc_prohibit_gethostby, sc_copyright_format): Rewrite in terms of
new maint.mk macros.
(sc_libvirt_unmarked_diagnostics): Fix whitespace.
* .x-sc_unmarked_diagnostics: New file.
* tests/object-locking.ml: Fix copyright.
* tools/virt-pki-validate.in: Likewise.
* tools/virt-xml-validate.in: Likewise.
2010-04-02 10:18:55 -06:00
Matthias Bolte
ffbfd2c813 Add virt-aa-helper and secaatest to .gitignore 2010-03-31 13:36:54 +02:00
Laine Stump
0fdf649672 Add flags to indicate presence of timekeeping-related qemu options
* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
                        features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test
2010-03-30 13:57:40 +02:00
David Allan
447c586a0d Add disk error policy to domain XML
* Fixes per feedback from Dan and Daniel
* Added test datafiles
* Re-disabled JSON flags
* Added code to print the error policy attribute when generating XML
* Re-add empty tag
2010-03-26 16:35:18 -04:00
Eric Blake
e07cf19fe5 build: don't use "test cond1 -o cond2": it's not portable
* configure.ac: Use "test cond1 || test cond2" instead.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Likewise.
* tests/test-lib.sh (verbose): Likewise.
2010-03-25 09:28:24 +01:00
Matthias Bolte
5edaf95599 esx: Make the conf parser compare names case insensitive in VMX mode
The keys of entries in a VMX file are case insensitive. Both scsi0:1.fileName
and scsi0:1.filename are valid. Therefore, make the conf parser compare names
case insensitive in VMX mode to accept every capitalization variation.

Also add test cases for this.
2010-03-24 21:03:37 +01:00
Jim Meyering
ca7db6cb80 tests: shell script portability and clean-up
* tests/test-lib.sh: "echo -n" is not portable.  Use printf instead.
Remove unnecessary uses of "eval-in-subshell" (subshell is sufficient).
Remove uses of tests' -a operator; it is not portable.
Instead, use "test cond && test cond2".
* tests/schematestutils.sh: Replace use of test's -a.
2010-03-24 09:23:01 +01:00
Matthias Bolte
8a7783c163 tests: Don't add extra padding if counter mod 40 is 0
This change only affects the output of tests that have an exact
multiple of 40 test cases. For example the domainschematest currently:

TEST: domainschematest
      ........................................ 40
      ........................................ 80
      ........................................ 120
      ........................................ 160
      ........................................                                         200 OK
PASS: domainschematest

It outputs additional 40 spaces on the last line.

The domainschematest output is fixed by the change in test-lib.sh. The
change in testutils.c fixes this for tests written in C. Currently no
C test has an exact multiple of 40 test cases, but I checked it and
the same problem exists there.

This patch stops that in both cases.
2010-03-24 01:07:57 +01:00
Jim Meyering
67904847f0 tests: do not use the ":disk" suffix in sample xml input
* tests/xml2sexprdata/xml2sexpr-curmem.xml: Remove ":disk" suffix from
"<target dev=" value.
* tests/xml2sexprdata/xml2sexpr-pv-localtime.xml: Likewise.
* tests/xml2sexprdata/xml2sexpr-curmem.sexpr: Update expected output
to match.
* tests/xml2sexprdata/xml2sexpr-pv-localtime.sexpr: Likewise.
2010-03-23 11:22:26 +01:00
Matthias Bolte
3528d66641 Make sure virtTestCaptureProgramOutput has a body on Windows
Now the virsh tests compile at least.
2010-03-23 02:08:14 +01:00
Eric Blake
0a33633579 maint: make Red Hat copyright notices consistent
Spell out 'Red Hat, Inc.':
 git grep -i 'Copyright.*Red Hat' | grep -v Inc

Include (C) consistently:
 git grep -i 'Copyright [^(].*Red Hat'

* src/lxc/lxc_container.c: Update copyright formatting.
* src/node_device/node_device_udev.c: Likewise.
* src/node_device/node_device_udev.h: Likewise.
* src/xen/xend_internal.h: Likewise.
* src/xen/xm_internal.c: Likewise.
* src/xen/xm_internal.h: Likewise.
* tests/xmconfigtest.c: Likewise.
* tests/object-locking.ml: Likewise.
* tools/virt-pki-validate.in: Likewise.
* tools/virt-xml-validate.in: Likewise.
2010-03-18 16:48:05 +01:00
Daniel Veillard
f92c041a1c qemu: pass the information when disks are read-only
* src/qemu/qemu_conf.c: add the ",readonly=on" for read-only disks
  and also parse it back in qemuParseCommandLineDisk()
* tests/qemuxml2argvtest.c
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.xml:
  add a specific regression test
2010-03-15 17:03:26 +01:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Chris Lalancette
aa2f6f96dd Get thread and socket information in virsh nodeinfo.
The current code for "nodeinfo" is pretty naive
about socket and thread information.  To determine the
sockets, it just takes the number of cpus and divides
by the number of cores.  For the thread count, it always
sets it to 1.  With more recent Intel machines, however,
hyperthreading is again an option, meaning that these
heuristics no longer work and give bogus numbers.  This
patch goes through /sys to get the additional
information so we properly report it.

Note that I had to edit the tests not to report on
socket and thread counts, since these are determined
dynamically now.

v2: As pointed out by Eric Blake, gnulib provides
    count-one-bits (which is LGPLv2+).  Use it instead
    of a hand-coded popcnt.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-03-08 09:26:04 -05:00
Daniel P. Berrange
74042b8fba Allow configurable timezones with QEMU
Allow an arbitrary timezone with QEMU by setting the $TZ environment
variable when launching QEMU

* src/qemu/qemu_conf.c: Set TZ environment variable if a timezone
  is requested
* tests/qemuxml2argvtest.c: Add test case for timezones
* tests/qemuxml2argvdata/qemuxml2argv-clock-france.xml,
  tests/qemuxml2argvdata/qemuxml2argv-clock-france.args: Data
  for timezone tests
2010-03-01 18:43:04 +00:00
Daniel P. Berrange
200c83b29d Support variable clock offset mode in QEMU
This allows QEMU guests to be started with an arbitrary clock
offset

The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
  if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
  qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
  qemuxml2argvtest.c: Test case, except we can't actually enable
  it yet.
2010-03-01 18:41:40 +00:00
Cole Robinson
a09af3b004 qemu: Report binary path if error parsing -help 2010-02-25 11:43:57 -05:00
Jim Meyering
083b901eb3 build: avoid non-srcdir "make distcheck" failures (srcdir vs wildcard)
* tests/xencapsdata/Makefile.am: Use $(wildcard in $(srcdir)-aware manner
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am (EXTRA_DIST): Likewise.
* Makefile.am (XML_EXAMPLES): Use $(wildcard in $(srcdir)-aware manner.
2010-02-25 10:50:18 +01:00
Jim Meyering
327d5fe072 build: avoid non-srcdir "make distcheck" failure (test_conf.sh)
* tests/confdata/Makefile.am (EXTRA_DIST): Apply $(wildcard... to
$(srcdir)/..., and then remove the prefix.
2010-02-25 10:50:09 +01:00
David Allan
b4bf51253b Fix daemon-conf invalid failures
The daemon-conf test would fail on my system if there was a system libvirtd
running.  In the course of troubleshooting that problem, I discovered that the
daemon-conf script would always fail if run by itself because it found the line:

\# that each "PARAMETER = VALUE" line in this file have the parameter

which it mistook for a line containing a parameter.  I have changed the test to
avoid mistaking a line containing \"PARAMETER = VALUE\" for a parameter line.

The corrupted config tests turned out to be failing because the test daemon was
discovering the pid file from the running daemon and exiting before it processed
the test config file.  Specifying the pid file for the corrupt config tests in
the same way as for the valid config test solved that problem.
2010-02-20 15:26:53 +01:00
Matthew Booth
3ec09478de Add QEMU support for virtio channel
Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:

-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4

and the following for a virtio channel:

-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0

* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
  QEMU command line generation
2010-02-18 17:56:50 +01:00
Matthew Booth
7813a0f81c Add domain support for virtio channel
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:

<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
  <target type='virtio' name='org.linux-kvm.port.0'/>
  <address type='virtio-serial' controller='0' bus='0'/>
</channel>

* docs/schemas/domain.rng: Add virtio-serial controller and virtio
  channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
  virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
  parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
  virDomainDefAddDiskControllers() renamed to
  virDomainDefAddImplicitControllers()
2010-02-18 17:52:03 +01:00
Jim Meyering
b78fddea39 tests: avoid NULL deref upon OOM failure
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Handle malloc
failure.
2010-02-16 18:09:13 +01:00
Daniel P. Berrange
38536d6f7f Annotate some virConnectPtr as mandatory non-null
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes

* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
  qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
  qemudBuildCommandLine()
2010-02-10 13:33:06 +00:00
Daniel P. Berrange
a70e599d80 Remove virConnectPtr from interface XML APIs
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in interface_conf.{h,c} and update all callers to
match
2010-02-10 13:32:48 +00:00
Daniel P. Berrange
031366383a Remove virConnectPtr from storage APIs & driver
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in storage_conf.{h,c} and storage_encryption_conf.{h,c}
and update all callers to match
2010-02-10 13:32:11 +00:00
Daniel P. Berrange
99edc443e9 Remove virConnectPtr from all node device XML APIs
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
2010-02-10 13:32:01 +00:00
Daniel P. Berrange
0677e11125 Remove virConnectPtr from network XML APis
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match
2010-02-10 13:31:28 +00:00
Daniel P. Berrange
910b019f93 Convert qemu command line flags to 64-bit int
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
  Use 'unsigned long long' for QEMU flags
2010-02-10 12:09:41 +00:00
Daniel P. Berrange
65842bf669 Remove virConnectPtr from all domain XML parsing/formatting APIs 2010-02-10 11:49:23 +00:00
Daniel P. Berrange
caa805ea64 Remove passing of virConnectPtr throughout QEMU driver 2010-02-10 11:49:23 +00:00
Daniel P. Berrange
719c50caf8 Fix QEMU hotplug device alias assignment
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
  for assigning device aliases for disks, host devices and
  controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
  all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
  Update for changed hostdev naming scheme
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
0943048ad0 Remove direct storage of hostnet_name & vlan
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged

* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
  and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
  Use a single network alias naming scheme regardless of NIC type
  or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
  for new simpler naming scheme
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
49a0f6cd99 Remove use of -netdev arg with QEMU
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
  until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
  data files for -netdev syntax
2010-02-02 16:31:47 +00:00
Daniel P. Berrange
9258ec0a2e Rewrite way QEMU PCI addresses are allocated
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.

It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
  list of existing PCI addresses, and allocating new addresses.
  Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
  qemuStartVMDaemon() method, as a prelude to moving it into the
  'define' method. Update list of allocated addresses when connecting
  to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
  tests/qemuxml2xmltest.c: Remove USB product test since all
  passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
  unused data files
2010-02-02 16:31:47 +00:00
Matthias Bolte
854111f97e esx: Stop passing around virConnectPtr for error reporting 2010-01-26 01:19:23 +01:00
Jim Meyering
2c8eb68969 fix "make distcheck" failure
* tests/Makefile.am (qemuhelpdata): Add qemu-0.12.1.
2010-01-21 15:24:15 +01:00
Matthias Bolte
1671b64702 Unset copied environment variables in qemuxml2argvtest
The test expected all environment variables copied in qemudBuildCommandLine
to have known values. So all of them have to be either set to a known value
or be unset. SDL_VIDEODRIVER and QEMU_AUDIO_DRV are not handled at all but
should be handled. Unset both, otherwise the test will fail if they are set
in the testing environment.

* src/qemu/qemu_conf.c: add a comment about copied environment variables
  and qemuxml2argvtest
* tests/qemuxml2argvtest.c: unset SDL_VIDEODRIVER and QEMU_AUDIO_DRV
2010-01-20 23:22:15 +01:00
Laine Stump
77dd67087b Update interface.rng and xml test files to match netcf 0.1.5
The RNG now supports IPv6 and bonds attached to bridges, along with
some other minor tweaks. All test files from netcf have been copied to
the test directory and added to the xml2xml and schema tests (and they
all pass, of course ;-)
2010-01-19 21:13:03 +01:00
Jiri Denemark
5d462bd0b3 Implement CPU topology support for QEMU driver
QEMU's command line equivalent for the following domain XML fragment
    <vcpus>2</vcpus>
    <cpu ...>
        ...
        <topology sockets='1' cores='2', threads='1'/>
    </cpu>

is

    -smp 2,sockets=1,cores=2,threads=1

This syntax was introduced in QEMU-0.12.

Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing

Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-01-19 11:40:09 +01:00
Daniel P. Berrange
b66924148a Convert VirtIO balloon over to -device syntax
Replace

   -balloon virtio

With

   -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3

This allows it to get correct assigned PCI address as declared in
previous patch

 * src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
   give it an explicit PCI address
 * tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
   where appropriate
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
a44d0dc26c Auto-assign PCI addresses
Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest.  These addresses are not stable across reboots. That will
come in a later patch

NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.

* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
  addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
  they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
  to include PCI slot/bus information
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
febc591683 Pass -vga none if no video card specified
QEMU always configures a VGA card. If no video card is included in
the libvirt XML, it is neccessary to explicitly turn off the default
using -vga none

* src/qemu/qemu_conf.c: Pass -vga none if no video card is configured
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for
  handling -vga none.
* tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args,
  tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test
  data files
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
4f6c999006 Add support for explicit -sdl flag to QEMU
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
  flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
d86c876a66 Convert guestfwd to -device, and add -sdl explicit args
The old syntax was

   -chardev SOMECONFIG
   -nic user,guestfwd=tcp:IP:PORT-chardev:CHARDEV

The new syntax is

   -chardev SOMECONFIG
   -netdev user,guestfwd=tcp:IP:PORT,chardev=ID,id=user-ID
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
16658da4e7 Convert PCI device assignment over to -device
The old syntax is

  -pcidevice host=BUS:SLOT:FUNCTION

The new syntax is

  -device pci-assign,host=BUS:SLOT:FUNCTION,addr=<PCI SLOT>,id=host0
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
42ce352c13 Convert USB hostdevices over to -device
The old syntax was

   -usbdevice host:PRODUCT:VENDOR

Or

   -usbdevice host:BUS.DEV

The new syntax is

   -device usb-host,product=PRODUCT,vendor=VENDOR

Or

   -device usb-host,hostbus=BUS,hostaddr=DEV
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
73370e9868 Convert USB disks over to -device
The previous syntax was severely limited in its options

  -usbdevice disk:/home/berrange/output.img

The new syntax is the same as for other disk types

  -drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
  -device usb-storage,drive=usb-1

Again, the index= arg is wrong here, and will be removed in a
later merge
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
1dd6f855c3 Convert NICs over to use -device & -netdev where possible
The current syntax uses a pair of args

   -net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
   -net user,vlan=3,name=user.0

The new syntax does not  need the vlan craziness anymore, and
so has a simplified pair of args

   -netdev user,id=user.0
   -device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
4886cba76a Convert audio devices over to -device syntax
The current syntax for audio devices is a horrible multiplexed
arg

    -soundhw sb16,pcspk,ac97

The new syntax is

    -device sb16,id=sound0

or

    -device AC97,id=sound1,addr=<PCI SLOT>

NB, pcspk still uses the old -soundhw syntax
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
38a22fbfaa Convert watchdog to -device
The current syntax for watchdogs is

    -watchdog i6300esb

The new syntax will now be

    -device i6300esb,id=watchdogNN,addr=<PCI-SLOT>
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
7b2f8cdd7c Convert character devices over to use -device
The current character device syntax uses either

  -serial tty,path=/dev/ttyS2

Or

  -chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0

With the new -device support, we now prefer

  -chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0

This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.

The monitor device changes to

  -chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor

In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off
2010-01-18 13:55:56 +00:00
Daniel P. Berrange
1ed1bf3a38 Probe for -device and use -nodefaults
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases

* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
  Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
2010-01-18 13:39:14 +00:00
Daniel P. Berrange
b030084f07 Auto-add disk controllers based on defined disks
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
  method for populating disk controllers, and call it after
  parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
  when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
  data to all data files which don't have it already
2010-01-18 13:35:40 +00:00
Daniel P. Berrange
4359900ed1 Remove restriction on duplicated sound devices in parser
It is perfectly acceptable to have multiple sound devices of
same type in guest configuration. If the underlying hypervisor
does not like this, it is its job to complain, not the XML
parser's

* src/conf/domain_conf.c: Remove hack which deleted duplicated
  sound device models.
* tests/xml2sexprdata/xml2sexpr-fv-sound.xml: Remove duplicate
  models
2010-01-18 12:44:50 +00:00
Jim Meyering
eabb98b0a8 gnulib added a new syntax-check test: use $(VAR), not @VAR@
The latter is not officially "wrong", but *is* terribly anachronistic.
I think automake documentation or comments call that syntax obsolescent.
* cfg.mk (_makefile_at_at_check_exceptions): Exempt @SCHEMADIR@
and @SYSCONFDIR@ uses -- there are no Makefile variables for those.
* docs/Makefile.am: Use $(INSTALL), not @INSTALL@.
* examples/dominfo/Makefile.am: Similar.
* examples/domsuspend/Makefile.am: Similar.
* proxy/Makefile.am: Similar.
* python/Makefile.am: Similar.
* python/tests/Makefile.am: Similar.
* src/Makefile.am: Similar.
* tests/Makefile.am: Similar.
2010-01-18 09:50:08 +01:00
Matthias Bolte
c2c4d51b2f esx: Add VNC support
* src/conf/domain_conf.c: add defaults for the video device
* src/esx/esx_vmx.[ch]: add VNC support to the VMX handling
* tests/vmx2xmltest.c, tests/xml2vmxtest.c: add tests for the VNC support
2010-01-18 01:44:20 +01:00
Daniel P. Berrange
d78554d884 Specify bus/unit instead of index for disks with QEMU
The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.

In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.

Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.

* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
  disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
  using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
2010-01-15 17:55:59 +00:00
Daniel P. Berrange
776e37e1eb Set default disk controller/bus/unit props
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files
2010-01-15 16:38:29 +00:00
Daniel P. Berrange
e8ac4a79f1 Make test suite output less verbose
Only print out '.' for each test case, full test output can be
re-enabled with VIR_TEST_VERBOSE=1, or VIR_TEST_DEBUG=XXXX

Sample output now looks like

  TEST: statstest
        ........................................ 40
        ...................................      75  OK
  PASS: statstest
  TEST: qparamtest
        ................................         32  OK
  PASS: qparamtest
  TEST:
        ............                             12  OK
2010-01-15 16:28:05 +00:00