Most of the code paths had to reset it to -1 and returning 0 was
only possible if we made it to the end of the function.
Initialize it to -1 and only set it to 0 if we reach the end, as we do
in most of libvirt code.
If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Best viewed with '-w' as this is just an adjustment for future patch to
be readable without that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Both the hal and udev drivers call virPCI*() functions to the the
SRIOV VF/PF info about PCI devices, and the UDEV backend calls
virPCI*() to get IOMMU group info. Since there is now a single
function call in node_device_linux_sysfs.c to do all of this, replace
all that code in the two backends with calls to
nodeDeviceSysfsGetPCIRelatedDevCaps().
Note that this results in the HAL driver (probably) unnecessarily
calling virPCIDevieAddressGetIOMMUGroupNum(), but in the case that the
host doesn't support IOMMU groups, that function turns into a NOP (it
returns -2, which causes the caller to skip the call to
virPCIDeviceAddressGetIOMMUGroupAddresses()). So in the worst case it
is a few extra cycles spent, and in the best case a mythical platform
that supported IOMMU groups but used HAL rather than UDEV would gain
proper reporting of IOMMU group info.
This file contains only a single function, detect_scsi_host_caps(),
which is declared in node_device_driver.h and called from both the hal
and udev backends. Other things common to the hal and udev drivers
can be placed in that file though. As a prelude to adding further
functions, this patch renames the existing function to something
closer in line with other internal libvirt function names
(nodeDeviceSysfsGetSCSIHostCaps()), and puts the declarations into a
separate .h file.
For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.
This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:
s/union _virNodeDevCapData */virNodeDevCapDataPtr /
and
s/caps->type/caps->data.type/
This will make me feel less guilty when adding functions that need a
pointer to one of these.
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In systemd >= 218, the udev_set_log_fn method has been marked
deprecated and turned into a no-op. Nothing in the udev client
library will print to stderr by default anymore, so we can
just stop installing a logging hook for new enough udev.
The manufacurer and product from USB device itself are usually not particularly
useful -- they tend to be missing, or ugly (all-uppercase, padded with spaces,
etc.). Prefer what's in the usb id database and fall back to descriptors only
if the device is too new to be in database.
https://bugzilla.redhat.com/show_bug.cgi?id=1138887
Leak introduced in commit 16ebf10f (v1.2.6), detected by valgrind:
==9816== 216 (96 direct, 120 indirect) bytes in 6 blocks are definitely lost in loss record 665 of 821
==9816== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9816== by 0x50836FB: virAlloc (viralloc.c:144)
==9816== by 0x1DBDBE27: udevProcessPCI (node_device_udev.c:546)
==9816== by 0x1DBDD79D: udevGetDeviceDetails (node_device_udev.c:1293)
* src/util/virpci.h (virPCIEDeviceInfoFree): New prototype.
* src/util/virpci.c (virPCIEDeviceInfoFree): New function.
* src/conf/node_device_conf.c (virNodeDevCapsDefFree): Clear
pci_express under pci case.
(virNodeDevCapPCIDevParseXML): Avoid leak.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
* src/libvirt_private.syms (virpci.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
This stops the error message spam when running unprivileged
libvirtd:
2014-06-30 12:38:47.990+0000: 631: error : virPCIDeviceConfigOpen:300 :
Failed to open config space file
'/sys/bus/pci/devices/0000:00:00.0/config': Permission denied
Reported by Daniel Berrange:
https://www.redhat.com/archives/libvir-list/2014-June/msg01082.html
This new element is there to represent PCI-Express capabilities
of a PCI devices, like link speed, number of lanes, etc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While exposing the info under <interface/> in previous patch works, it
may work only in cases where interface is configured on the host.
However, orchestrating application may want to know the link state and
speed even in that case. That's why we ought to expose this in nodedev
XML too:
virsh # nodedev-dumpxml net_eth0_f0_de_f1_2b_1b_f3
<device>
<name>net_eth0_f0_de_f1_2b_1b_f3</name>
<path>/sys/devices/pci0000:00/0000:00:19.0/net/eth0</path>
<parent>pci_0000_00_19_0</parent>
<capability type='net'>
<interface>eth0</interface>
<address>f0🇩🇪f1:2b:1b:f3</address>
<link speed='1000' state='up'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A PCI device can be associated with a specific NUMA node. Later, when
a guest is pinned to one NUMA node the PCI device can be assigned on
different NUMA node. This makes DMA transfers travel across nodes and
thus results in suboptimal performance. We should expose the NUMA node
locality for PCI devices so management applications can make better
decisions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations. Similar
to the recent cleanup to "src/util" directory, it's better to use a
typedef for variable types, function types and other usages. Other
enumeration and folders will be changed to typedef's in the future.
Most of the files changed in this commit are reltaed to Node and
Network (node_device_conf.h and nwfilter_params.*) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Some CDROM devices are reported by udev to have an ID_TYPE="generic"
thus it is necessary to check if ID_CDROM is present.
As a side effect, treating ID_TYPE="generic" as a missing ID_TYPE will
enable checks for ID_DRIVE_FLASH_SD and ID_DRIVE_FLOPPY and the
udevKludgeStorageType heuristic.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This includes adding it to the nodedev parser and formatter, docs, and
test.
An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):
<device>
<name>pci_0000_02_00_1</name>
<capability type='pci'>
...
<iommuGroup number='12'>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
</iommuGroup>
</capability>
</device>
Since scsi generic device doesn't have DEVTYPE property set, the
only way to know if it's a scsi generic device or not is to read
the "SUBSYSTEM" property.
The XML of the scsi generic device will be like:
<device>
<name>scsi_generic_sg0</name>
<path>/sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0</path>
<parent>scsi_0_0_0_0</parent>
<capability type='scsi_generic'>
<char>/dev/sg0</char>
</capability>
</device>
Checking if the "devtype" is NULL along with each "if" statements
is bad. It wastes the performance, and also not good for reading.
And also when the "devtype" is NULL, the logic is also not clear.
This reorgnizes the logic of with "if...else" and a bunch of "else if".
Other changes:
* Change the function style.
* Remove the useless debug statement.
* Get rid of the goto
* New helper udevDeviceHasProperty to simplify the logic for checking
if a property is existing for the device.
* Add comment to clarify "PCI devices don't set the DEVTYPE property"
* s/sysfs path/sysfs name/, as udev_device_get_sysname returns the
name instead of the full path. E.g. "sg0"
* Refactor the comment for setting VIR_NODE_DEV_CAP_NET cap type
a bit.
Call virLogVMessage instead of virLogMessage, since libudev
called us with a va_list object, not a list of arguments.
Honor message priority and strip the trailing newline.
https://bugzilla.redhat.com/show_bug.cgi?id=969152
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
In renaming driver API implementations to match the
public API naming scheme, a few cases in the node
device driver were missed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The nodedev driver currently only detects harddisk, cdrom
and floppy devices. This adds support for SD cards, which
are common storage for ARM devices, eg the Google ChromeBook
<device>
<name>block_mmcblk0_0xb1c7c08b</name>
<parent>computer</parent>
<capability type='storage'>
<block>/dev/mmcblk0</block>
<drive_type>sd</drive_type>
<serial>0xb1c7c08b</serial>
<size>15758000128</size>
<logical_block_size>512</logical_block_size>
<num_blocks>30777344</num_blocks>
</capability>
</device>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
