Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
One of our latest USB device handling patches
05abd1507d introduced a regression.
That is, we first create a temporary list of all USB devices that
are to be used by domain just starting up. Then we iterate over and
check if a device from the list is in the global list of currently
assigned devices (activeUsbHostdevs). If not, we add it there and
continue with next iteration then. But if a device from temporary
list is either taken already or adding to the activeUsbHostdevs fails,
we remove all devices in temp list from the activeUsbHostdevs list.
Therefore, if a device is already taken we remove it from
activeUsbHostdevs even if we should not. Thus, next time we allow
the device to be assigned to another domain.
src/qemu/qemu_hostdev.c:
refactor qemuPrepareHostdevUSBDevices function, make it focus on
adding usb device to activeUsbHostdevs after check. After that,
the usb hotplug function qemuDomainAttachHostDevice also could use
it.
expand qemuPrepareHostUSBDevices to perform the usb search,
rollback on failure.
src/qemu/qemu_hotplug.c:
If there are multiple usb devices available with same vendorID and productID,
but with different value of "bus, device", we give an error to let user
use <address> to specify the desired one.
usbFindDevice():get usb device according to
idVendor, idProduct, bus, device
it is the exact match of the four parameters
usbFindDeviceByBus():get usb device according to bus, device
it returns only one usb device same as usbFindDevice
usbFindDeviceByVendor():get usb device according to idVendor,idProduct
it probably returns multiple usb devices.
usbDeviceSearch(): a helper function to do the actual search
If the daemon is restarted it will lose list of active
USB devices assigned to active domains. Therefore we need
to rebuild this list on qemuProcessReconnect().
To prevent assigning one USB device to two domains,
we keep a list of assigned USB devices. On domain
startup - qemuProcessStart() - we insert devices
used by domain into the list but remove them only
on detach-device. Devices are, however, released
on qemuProcessStop() as well.
These changes are applied only if the hostdev has a parent net device
(i.e. if it was defined as "<interface type='hostdev'>" rather than
just "<hostdev>"). If the parent netdevice has virtual port
information, the original virtualport associate functions are called
(these set and restore both mac and port profile on an
interface). Otherwise, only mac address is set on the device.
Note that This is only supported for SR-IOV Virtual Functions (not for
standard PCI or USB netdevs), and virtualport association is only
supported for 802.1Qbh. For all other types of cards and types of
virtualport, a "Config Unsupported" error is returned and the
operation fails.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
return -1;
..skipped...
if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
goto reattachdevs;
NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667
This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:
* Add the device to inactive list during nodedev-dettach
* Remove the device from inactive list during nodedev-reattach
* Remove the device from inactive list during attach-device
(for non-managed device)
* Add the device to inactive list after detach-device, only
if the device is not managed
With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)
if (pciResetDevice(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0)
goto reattachdevs;
* src/qemu/qemu_hostdev.c (qemuDomainReAttachHostdevDevices):
pciDeviceListFree(pcidevs) in the end free()s the device even if
it's in use by other domain, which can cause a race.
How to reproduce:
<script>
virsh nodedev-dettach pci_0000_00_19_0
virsh start test
virsh attach-device test hostdev.xml
virsh start test2
for i in {1..5}; do
echo "[ -- ${i}th time --]"
virsh nodedev-reattach pci_0000_00_19_0
done
echo "clean up"
virsh destroy test
virsh nodedev-reattach pci_0000_00_19_0
</script>
Device pci_0000_00_19_0 dettached
Domain test started
Device attached successfully
error: Failed to start domain test2
error: Requested operation is not valid: PCI device 0000:00:19.0 is in use by domain test
[ -- 1th time --]
Device pci_0000_00_19_0 re-attached
[ -- 2th time --]
Device pci_0000_00_19_0 re-attached
[ -- 3th time --]
Device pci_0000_00_19_0 re-attached
[ -- 4th time --]
Device pci_0000_00_19_0 re-attached
[ -- 5th time --]
Device pci_0000_00_19_0 re-attached
clean up
Domain test destroyed
Device pci_0000_00_19_0 re-attached
The patch also fixes another problem, there won't be error like
"qemuDomainReAttachHostdevDevices: Not reattaching active
device 0000:00:19.0" in daemon log if some device is in active.
As pciResetDevice and pciReattachDevice won't be called for
the device anymore. This is sensible as we already reported
error when preparing the device if it's active. Blindly trying
to pciResetDevice & pciReattachDevice on the device and getting
an error is just redundant.
To support "managed" mode of host PCI device, we record the original
states (unbind_from_stub, remove_slot, and reprobe) so that could
reattach the device to host with original driver. But there is no XML
for theses attrs, and thus after daemon is restarted, we lose the
original states. It's easy to reproduce:
1) virsh start domain
2) virsh attach-device dom hostpci.xml (in 'managed' mode)
3) service libvirtd restart
4) virsh destroy domain
You will see the device won't be bound to the original driver
if there was one.
This patch is to solve the problem by introducing internal XML
(won't be dumped to user, only dumped to status XML). The XML is:
<origstates>
<unbind/>
<remove_slot/>
<reprobe/>
</origstates>
Which will be child node of <hostdev><source>...</souce></hostdev>.
(only for PCI device).
A new struct "virDomainHostdevOrigStates" is introduced for the XML,
and the according members are updated when preparing the PCI device.
And function "qemuUpdateActivePciHostdevs" is modified to honor
the original states. Use of qemuGetPciHostDeviceList is removed
in function "qemuUpdateActivePciHostdevs", and the "managed" value of
the device config is honored by the change. This fixes another problem
alongside:
qemuGetPciHostDeviceList set the device as "managed" force
regardless of whether the device is configured as "managed='yes'"
or not in XML, which is not right.
BZ# https://bugzilla.redhat.com/show_bug.cgi?id=736214
The problem is caused by the original info of domain's PCI dev is
maintained by qemu_driver->activePciHostdevs list, (E.g. dev->reprobe,
which stands for whether need to reprobe driver for the dev when do
reattachment). The fields (dev->reprobe, dev->unbind_from_stub, and
dev->remove_slot) are initialized properly when preparing the PCI
device for managed attachment. However, when do reattachment, it
construct a complete new "pciDevice" without honoring the original
dev info, and thus the dev won't get the original driver or can get
other problem.
This patch is to fix the problem by get the devs from list
driver->activePciHostdevs.
Tested with following 3 scenarios:
* the PCI was bound to some driver not pci-stub before attaching
result: the device will be bound to the original driver
* the PCI was bound to pci-stub before attaching
result: no driver reprobing, and still bound to pci-stub
* The PCI was not bound to any driver
result: no driver reprobing, and still not bound to any driver.
When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.
How to reproduce:
1) Define two domains with same PCI device defined in the confs.
2) # virsh start domain1
3) # virsh start domain2
4) # virsh nodedev-reattach $pci_device
You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).
This patch is to prohibit the bug by:
1) Prohibit a domain starting or device attachment right at
preparation period (qemuPrepareHostdevPCIDevices) if the
device is in list driver->activePciHostdevs, which means
it's used by other domain.
2) Introduces a new field for struct _pciDevice, (const char *used_by),
it will be set as the domain name at preparation period,
(qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
the device from driver->activePciHostdevs if it's still used by
other domain when stopping the domain process.
* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
changed)
Signed-off-by: Eric Blake <eblake@redhat.com>
pciDeviceListSteal(pcidevs, dev) removes dev from pcidevs reducing
the length of pcidevs, so moving onto what was the next dev is wrong.
Instead callers should pop entry 0 repeatedly until pcidevs is empty.
Signed-off-by: Steve Hodgson <shodgson@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The QEMU driver file is far too large. Move all the hostdev
helper code out into a separate file. No functional change.
* src/qemu/qemu_hostdev.c, src/qemu/qemu_hostdev.h,
src/Makefile.am: Add hostdev helper file
* src/qemu/qemu_driver.c: Delete hostdev code
