This new module holds and formats capabilities for emulator. If you
are about to create a new domain, you may want to know what is the
host or hypervisor capable of. To make sure we don't regress on the
XML, the formatting is not something left for each driver to
implement, rather there's general format function.
The domain capabilities is a lockable object (even though the locking
is not necessary yet) which uses reference counter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3
Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In the test, the snapshot XML is written into a file that's located
under:
abs_srcdir/vboxsnapshotxmldata/testResult.vbox
However, the abs_srcdir doesn't have to be necessarily writable. It
should have been abs_builddir instead. Moreover, the label in the func
creating the file is called 'fail' while it fulfils the duty of
'cleanup' label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the very beginning of the test we check if the underlying
filesystem supports extended attributes as they are used to store fake
SELinux labels. In order to check that, a dummy file is created and
semi-random attribute is set. However, the file is created under:
abs_srcdir "/securityselinuxlabeldata/testxattr"
which has two problems: abs_srcdir is not required to be writable, so
it should have been abs_builddir. The second one is - there's no
"securityselinuxlabeldata" folder under abs_builddir. The problem was
introduced in caf164f1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libvirt unit test used setxattr with "user.libvirt.selinux" name to
emulate setfilecon of selinux. But for some old kernel filesystem
(like 2.6.32-431.el6.x86_64), if the filesystem is not mounted with
user_xattr flag, the setxattr with "user.libvirt.selinux" will fail.
So adding testUserXattrEnabled() in securityselinuxlabeltest.c,
if user_xattr is not enabled, skip this case.
The user_xattr is departed in newer kernel, therefore this commit is
only for the compatablity for old kernel.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Scott Sullivan <ssullivan@liquidweb.com>
Since commit d86c876a66 we are using
guestfwd=tcp:IP:PORT,chardev=ID for guestfwd specification, however,
that has not changed in qemu, so guestfwd does not work since.
Apart from that, guestfwd is not working with older qemu that doesn't
have QEMU_CAPS_DEVICE.
Both regressions exist since late 2009 and nobody found that (until
now), so I'm only fixing the first one.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1112066
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The QEMU VNC client arg code has a long standing typo
of SASL_CONF_DIR when it should be SASL_CONF_PATH for
the env variable name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When CPU comparison APIs return VIR_CPU_COMPARE_INCOMPATIBLE, the caller
has no clue why the CPU is considered incompatible with host CPU. And in
some cases, it would be nice to be able to get such info in a client
rather than having to look in logs.
To achieve this, the APIs can be told to return VIR_ERR_CPU_INCOMPATIBLE
error for incompatible CPUs and the reason will be described in the
associated error message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The parent directory doesn't necessarily need to be stored after we
don't mangle the path stored in the image. Remove it and tweak the code
to avoid using it.
Store backing chain paths as non-canonical. The canonicalization step
will be already taken. This will allow to avoid storing unnecessary
amounts of data.
libvirt always uses an absolute path to address the top image of an
image chain. Our storage test tests also the relative path which won't
ever be used. Additionally it makes the test more complicated.
Now that we store only relative names in virStorageSource's member
relPath the backingRelative member is obsolete. Remove it and adapt the
code to the removal.
Due to various refactors and compatibility with the virstoragetest the
relPath field of the virStorageSource structure was always filled either
with the relative name or the full path in case of absolutely backed
storage. Return its original purpose to store only the relative name of
the disk if it is backed relatively and tweak the tests.
Now that we changed ordering of the stored metadata so that the backing
store is described by the child element the test should reflect this
change too.
Remove the expected backing store field as it's actually described by
the next element in the backing chain, so there's no need for
duplication.
This patch introduces a function that will allow us to resolve a
relative difference between two elements of a disk backing chain. This
function will be used to allow relative block commit and block pull
where we need to specify the new relative name of the image to qemu.
This patch also adds unit tests for the function to verify that it works
correctly.
Introduce a common function that will take a callback to resolve links
that will be used to canonicalize paths on various storage systems and
add extensive tests.
To free string lists with some strings stolen from the middle we need to
walk the complete array. Introduce a new helper that takes the string
list size to free such string lists.
There are no options to parse here other than the name of the device,
and all three possible device names have the same prefix
("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the
code is fairly simple. It has been implemented such that it will be
easier to add handling for other -device entries that aren't otherwise
recognized - just add another "else if (STRPREFIX(opts, ....)" clause.
qemuParseCommandLineString() previously would always add a <memballoon
model='virtio'/> to every result (the comments erroneously say that it
is adding a <memballoon model='none'/>) This has been changed to add
model='none', and 84 test case xml's updated accordingly (so that
qemuxml2argvtest won't fail).
Now that the memballoon device is properly parsed, we can safely add a
test for properly ignoring -nodefconfig and -nodefaults. Rather than
adding an entire new test case for this (and memballoon), we just
randomly pick the clock-utc test and modify it slightly to fulfill the
purpose.
'virstoragetest' accesses backing chains of files on local storage with
the help of the storage driver. Disable the test on builds without the
storage driver as the test is crashing otherwise.
Reported by: Roman Bogorodskiy
The virNodeParseSocket() function tries to get socked ID from
'topology/physical_package_id' file. However, on some architectures
the file contains the -1 constant which makes in turn libvirt think
the info extraction was unsuccessful. If that's the case, we need to
overwrite the obtained integer with zero like we are doing for other
architectures.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we are opening the cpuinfo file via fopen() which if fails
doesn't print any error message. We should do that instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, we are doing compile time decisions on which architecture is
used. However, for testing purposes it's much easier if we pass host
architecture as parameter and then let the function decide which code
snippet for extracting host CPU info will be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This modifies the formatting function of virInterface to be a proper
mirror of the parse function, including the addition of a
"parentIfType" arg so that we can decide whether or not it is
appropriate to emit the elements that are only in toplevel interfaces,
as well as the <link> element (which isn't allowed for bridge
interfaces).
Since the restructuring of the code necessarily changes the order of
some of the elements, some test case data had to be updated.
The interface state for bonds and vlans does seem to reflect the state
of the underlying physical devices, at least in some cases, so it
makes sense to allow reporting it (netcf now does).
The link state/speed for bridge devices is meaningless though, so we
don't even look for it.
There are two places where you'll find info on page sizes. The first
one is under <cpu/> element, where all supported pages sizes are
listed. Then the second one is under each <cell/> element which refers
to concrete NUMA node. At this place, the size of page's pool is
reported. So the capabilities XML looks something like this:
<capabilities>
<host>
<uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid>
<cpu>
<arch>x86_64</arch>
<model>Westmere</model>
<vendor>Intel</vendor>
<topology sockets='1' cores='1' threads='1'/>
...
<pages unit='KiB' size='4'/>
<pages unit='KiB' size='2048'/>
<pages unit='KiB' size='1048576'/>
</cpu>
...
<topology>
<cells num='4'>
<cell id='0'>
<memory unit='KiB'>4054408</memory>
<pages unit='KiB' size='4'>1013602</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>4071072</memory>
<pages unit='KiB' size='4'>1017768</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
</cpus>
</cell>
...
</cells>
</topology>
...
</host>
<guest/>
</capabilities>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On RHEL6 the vboxsnapshotxmltest fails because of wrong xml that
is generated by libvirt. However the core issue is in the xml data
itself with the wrong indentation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Coverity checks for patterns of handling return values of functions.
Some recent addition must have tripped a threshold where coverity now
complains that we usually check the return value of virUUIDGenerate but
don't do it in one place. Add a check to make coverity happy.
Commit 7c6fc39 introduced a regression in the XML produced for older
clients. The argument at the time was that clients shouldn't be
depending on output-only data for something that is only going to
be triggered for a transient guest; but John Ferlan reported that
the automated testsuite was such a client. It's better to be safe
than sorry by guaranteeing back-compat cruft. Note that later
patches will be using <mirror> for active block commit, but there
we don't have to worry about back-compat.
* src/conf/domain_conf.c (virDomainDiskDefFormat): Restore old
style output when necessary.
* docs/schemas/domaincommon.rng: Validate back-compat style.
* docs/formatdomain.html.in: Update the documentation.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This new element is there to represent PCI-Express capabilities
of a PCI devices, like link speed, number of lanes, etc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The block commit code looks for an explicit base file relative
to the discovered top file; so for a chain of:
base <- snap1 <- snap2 <- snap3
and a command of:
virsh blockcommit $dom vda --base snap2 --top snap1
we got a sane message (here from libvirt 1.0.5):
error: invalid argument: could not find base 'snap2' below 'snap1' in chain for 'vda'
Meanwhile, recent refactoring has slightly reduced the quality of the
libvirt error messages, by losing the phrase 'below xyz':
error: invalid argument: could not find image 'snap2' in chain for 'snap3'
But we had a one-off, where we were not excluding the top file
itself in searching for the base; thankfully qemu still reports
the error, but the quality is worse:
virsh blockcommit $dom vda --base snap2 --top snap2
error: internal error unable to execute QEMU command 'block-commit': Base '/snap2' not found
Fix the one-off in blockcommit by changing the semantics of name
lookup - if a starting point is specified, then the result must
be below that point, rather than including that point. The only
other call to chain lookup was blockpull code, which was already
forcing the lookup to omit the active layer and only needs a
tweak to use the new semantics.
This also fixes the bug exposed in the testsuite, where when doing
a lookup pinned to an intermediate point in the chain, we were
unable to return the name of the parent also in the chain.
* src/util/virstoragefile.c (virStorageFileChainLookup): Change
semantics for non-NULL startFrom.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Adjust caller,
to keep existing semantics.
* tests/virstoragetest.c (mymain): Adjust to expose new semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add some more tests of what happens when we restrict a lookup
to begin at a point in the middle of a chain. In particular,
we want to ensure that a parent is not found when starting at
the child. This commit also demonstrates that we have a slight
difference in behavior on what parent we report when filtering
is in effect; as the determination of the parent affects the
code in block commit, exposing this in the testsuite will help
justify changes in future patches that tweak the semantics of
what lookups are allowed.
* tests/virstoragetest.c (testStorageLookup): Test user input.
(TEST_LOOKUP_TARGET): Add parameter.
(mymain): Add lookup tests.
Signed-off-by: Eric Blake <eblake@redhat.com>
The next patch will be adding tests, including adding a parameter
for testing more conditions. For ease of review of that patch, I
want to create common context lines that don't change when the new
tests are added (it's easier to visually review additions than it
is to review an entire chunk of tests rewritten into another
larger chunk of tests).
* tests/virstoragetest.c (mymain): Add a parameter and renumber
the lookup tests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Typing chain->backingStore->backingStore gets old after a while;
introduce some alias variables to make the test more compact.
* tests/virstoragetest.c (mymain): Introduce some shorthand.
Signed-off-by: Eric Blake <eblake@redhat.com>
Automatically allocate PCI addresses for devices instead
of hardcoding them in the driver code. The current
allocation schema is to dedicate an entire slot for each devices.
Also, allow having arbitrary number of devices.
When the test is failing but the debug output isn't enabled the
resulting line would look ugly like and would not contain the actual
difference.
TEST: virstoragetest
.................chain member 1!chain member 1!chain member 1!
Store the member index in the actual checked string to hide this problem
The vcpupin command allowed specifying a negative number for the --vcpu
argument. This would the overflow when the underlying virDomainPinVcpu
API was called.
$ virsh vcpupin r7 -1 0
error: numerical overflow: input too large: 4294967295
Switch the vCPU variable to a unsigned int and parse it using the
corresponding function.
Also improve the vcpupin test to cover all the defects.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101059
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit d69415d4, vmware version is parsed from both stdout and
stderr. This patch makes version parsing work even if there is garbage
(libvirt debug messages for example) in the command output.
Add test data for this case.
Currently it is not possible to determine the speed of an interface
and whether a link is actually detected from the API. Orchestrating
platforms want to be able to determine when the link has failed and
where multiple speeds may be available which one the interface is
actually connected at. This commit introduces an extension to our
interface XML (without implementation to interface driver backends):
<interface type='ethernet' name='eth0'>
<start mode='none'/>
<mac address='aa:bb:cc:dd:ee:ff'/>
<link speed='1000' state='up'/>
<mtu size='1492'/>
...
</interface>
Where @speed is negotiated link speed in Mbits per second, and state
is the current NIC state (can be one of the following: "unknown",
"notpresent", "down", "lowerlayerdown","testing", "dormant", "up").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This structure contains the data to be saved in the VirtualBox XML file
and can be manipulated with severals exposed functions.
The structure is created by vboxSnapshotLoadVboxFile taking the
machine XML file.
It also can rewrite the XML by using vboxSnapshotSaveVboxFile.
qmeuargv2xmltest.c would fail any test that logged anything during
qemuParseCommandline(), but then discard the log message, even with
VIR_TEST_DEBUG=2. This patch outputs the log messages with
fprintf(stderr,...) when debug logging is on.
In the process of modifying that logic, the testInfo data was made
more similar to that of qemuxml2argvtest.c - rather than turning
info->extraFlags into a bool, an enum of flags is defined, the info
struct is given an "unsigned int flags", and FLAG_EXPECT_WARNING is
saved into info->flags, to be checked during the test; this will make
it easier to add other FLAG_EXPECT_* items in the future.
Now that we track a disk mirror as a virStorageSource, we might
as well update the XML to theoretically allow any type of
mirroring destination (not just a local file). A later patch
will also be reusing <mirror> to track the block commit of the
top layer of a chain, which is another case where libvirt needs
to update the backing chain after the job is finally pivoted,
and since backing chains can have network backing files as the
destination to commit into, it makes more sense to display that
in the XML.
This patch changes output-only XML; it was already documented
that <mirror> does not affect a domain definition at this point
(because qemu doesn't provide persistent bitmaps yet). Any
application that was starting a block copy job with older libvirt
and then relying on the domain XML to determine if it was
complete will no longer be able to access the file= and format=
attributes of mirror that were previously used. However, this is
not going to be a problem in practice: the only time a block copy
job works is on a transient domain, and any app that is managing
a transient domain probably already does enough of its own
bookkeeping to know which file it is mirroring into without
having to re-read it from the libvirt XML. The one thing that
was likely to be used in a mirroring job was the ready=
attribute, which is unchanged. Meanwhile, I made sure the schema
and parser still accept the old format, even if we no longer
output it, so that upgrading from an older version of libvirt is
seamless.
* docs/schemas/domaincommon.rng (diskMirror): Alter definition.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two
styles of mirror elements.
(virDomainDiskDefFormat): Output new style.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New
file, copied from...
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here
before modernizing.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New
files.
* tests/qemuxml2xmltest.c (mymain): Test both styles.
Signed-off-by: Eric Blake <eblake@redhat.com>
As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another. This patch converts
domain disk source to be a pointer.
In this patch, the pointer is ALWAYS allocated (thanks in part to
the previous patch forwarding all disk def allocation through a
common point), and all other changse are just mechanical fallout of
the new type; there should be no functional change. It is possible
that we may want to leave the pointer NULL for a cdrom with no
medium in a later patch, but as that requires a closer audit of the
source to ensure we don't fault on a null dereference, I didn't do
it here.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of src.
* src/conf/domain_conf.c: Adjust all clients.
* src/security/security_selinux.c: Likewise.
* src/qemu/qemu_domain.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* tests/securityselinuxlabeltest.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
A PCI device can be associated with a specific NUMA node. Later, when
a guest is pinned to one NUMA node the PCI device can be assigned on
different NUMA node. This makes DMA transfers travel across nodes and
thus results in suboptimal performance. We should expose the NUMA node
locality for PCI devices so management applications can make better
decisions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For now only one test is introduced. It's purpose in life
is to check we don't break NUMA host distances XML format.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If user or management application wants to create a guest,
it may be useful to know the cost of internode latencies
before the guest resources are pinned. For example:
<capabilities>
<host>
...
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>4004132</memory>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='20'/>
</distances>
<cpus num='2'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='2' socket_id='0' core_id='2' siblings='2'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>4030064</memory>
<distances>
<sibling id='0' value='20'/>
<sibling id='1' value='10'/>
</distances>
<cpus num='2'>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
<cpu id='3' socket_id='0' core_id='2' siblings='3'/>
</cpus>
</cell>
</cells>
</topology>
...
</host>
...
</capabilities>
We can see the distance from node1 to node0 is 20 and within nodes 10.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The qemu JSON monitor test allows to test also expected command
arguments. As the error from the monitor simulator is returned as a
simulated qemu error (in JSON) all other JSON contained in the error
message needs to be escaped. This will happen if the monitor command
under test receives a JSON array as an argument.
This will improve the error message from:
libvirt: error : internal error: cannot parse json { "error": { "desc":
"Invalid value of argument 'keys' of command 'send-key': expected 'ble'
got '[{"type":"number","data":43},{"type":"number","data":26},
{"type":"number","data":46},{"type":"number","data":32}]'",
"class": "UnexpectedCommand" } }: lexical error: invalid string in json text.
To:
libvirt: QEMU Driver error : internal error: unable to execute QEMU
command 'send-key': Invalid value of argument 'keys' of command
'send-key': expected 'ble' got '[{"type":"number","data":43},
{"type":"number","data":26},{"type":"number","data":46},
{"type":"number","data":32}]'
This improvement will not have any effect on tests executing as
expected, but it will help test development.
virstoragetest now requires parts of the storage driver to be built.
Without this change the test can't be compiled on platforms that don't
build the storage driver (mingw).
make[2]: *** No rule to make target `../src/libvirt_driver_storage_impl.la', needed by `virstoragetest.exe'. Stop.
Broken by commit 713cc3b0a7
qemuMonitorJSONSendKey declares the "holdtime" argument as unsigned int
while the command was constructed in qemuMonitorJSONMakeCommand using
the "P" modifier which took a unsigned long from the variable
arguments which then made it possible to access uninitialized memory.
This broke the qemumonitorjsontest on 32bit fedora 20:
64) qemuMonitorJSONSendKey
... libvirt: QEMU Driver error : internal error: unsupported data type 'W' for arg 'WVSì D$0èwÿÿÃAå' FAILED
Uncovered by upstream commit f744b831c6.
Additionally add test for the hold-time option.
All the fields crammed into two lines weren't easy to parse by human
eyes. Split up the format string into lines and put it into a central
variable so that changes in two places aren't necessary.
To allow using the array manipulation macros on the arrays returned by
virStringSplit we need to know the count of the elements in the array.
Modify virStringSplit to return this value, rename it and add a helper
with the old name so that we don't need to update all the code.
Use the new backing store parser in the backing chain crawler. This
change needs one test change where information about the NBD image are
now parsed differently.
Stat the path of the storage file being tested to set the correct type
into the virStorageSource. This will avoid breaking the test suite when
inquiring metadata of directory paths in the next patches.
My future work will modify the metadata crawler function to use the
storage driver file APIs to access the files instead of accessing them
directly so that we will be able to request the metadata for remote
files too. To avoid linking the storage driver to every helper file
using the utils code, the backing chain traversal function needs to be
moved to the storage driver source.
Additionally the virt-aa-helper and virstoragetest programs need to be
linked with the storage driver as a result of this change.
Reported by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Some of the tests for virTimeLocalOffsetFromUTC set an imaginary
timezone that attempts to force dyalight savings time active all the
time by setting a start date of 0/00:00:00 and end date of
366/23:59:59. Since the day is 0-based, 366 really means "day 367"
which will never occur - this was an attempt to eliminate problems
with DST not being active in some cases right around midnight on
January 1. Even though it didn't completely solve the problem, it
didn't seem to cause harm so it was left in the test timezones.
Although Linux glibc doesn't mind having a DST end date of 366,
FreeBSD refuses to use such timezones, so the tests fail. This patch
changes the 366 to 365.
This may or may not cause failure of the remaining DST tests around
midnight Jan 1. If so, we will need to disable those tests at year's
end too.
On a 32-bit platform:
virstringtest.c: In function 'mymain':
virstringtest.c:673: warning: this decimal constant is unsigned only in ISO C90
I already had a comment in the file about the 64-bit counterpart;
the easiest fix was to make both sites use the standardized macro
that is guaranteed to work.
* tests/virstringtest.c (mymain): Minimum signed integers are a pain.
Signed-off-by: Eric Blake <eblake@redhat.com>
The original version of virTimeLocalOffsetFromUTC() would fail for
certain times of the day if daylight savings time was active. This
could most easily be seen by uncommenting the TEST_LOCALOFFSET() cases
that include a DST setting.
After a lot of experimenting, I found that the way to solve it in
almost all test cases is to set tm_isdst = -1 in the struct tm prior
to calling mktime(). Once this is done, the correct offset is returned
for all test cases at all times except the two hours just after
00:00:00 Jan 1 UTC - during that time, any timezone that is *behind*
UTC, and that is supposed to always be in DST will not have DST
accounted for in its offset.
I believe that the code of virTimeLocalOffsetFromUTC() actually is
correct for all cases, but the problem still encountered is due to our
inability to come up with a TZ string that properly forces DST to
*always* be active. Since a modfication of the (currently fixed)
expected result data to account for this would necessarily use the
same functions that we're trying to test, I've instead just made the
test program conditionally bypass the problematic cases if the current
date is either December 31 or January 1. This way we get maximum
testing during 363 days of the year, but don't get false failures on
Dec 31 and Jan 1.
Commit 292d3f2d fixed the build with libselinux 2.3, but missed
some suggestions by eblake
https://www.redhat.com/archives/libvir-list/2014-May/msg00977.html
This patch changes the macro introduced in 292d3f2d to either be
empty in the case of newer libselinux, or contain 'const' in the
case of older libselinux. The macro is then used directly in
tests/securityselinuxhelper.c.
Several function signatures changed in libselinux 2.3, now taking
a 'const char *' instead of 'security_context_t'. The latter is
defined in selinux/selinux.h as
typedef char *security_context_t;
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU ppce500 board uses the legacy -serial option.
Other PPC boards don't give any way to explicitly wire in a -chardev
except pseries which uses -device spapr-vty with -chardev.
Add test case for -serial option for ppce500
Signed-off-by: Olivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since there isn't a single libc API to get this value, this patch
supplies one which gets the value by grabbing current time, then
converting that into a struct tm with gmtime_r(), then back to a
time_t using mktime.
The returned value is the difference between UTC and localtime in
seconds. If localtime is ahead of UTC (east) the offset will be a
positive number, and if localtime is behind UTC (west) the offset will
be negative.
This function should be POSIX-compliant, and is threadsafe, but not
async signal safe. If it was ever necessary to know this value in a
child process, we could cache it with a one-time init function when
libvirtd starts, then just supply the cached value, but that
complexity isn't needed for current usage; that would also have the
problem that it might not be accurate after a local daylight savings
boundary.
(If it weren't for DST, we could simply replace this entire function
with "-timezone"; timezone contains the offset of the current timezone
(negated from what we want) but doesn't account for DST. And in spite
of being guaranteed by POSIX, it isn't available on older versions of
mingw.)
Signed-off-by: Eric Blake <eblake@redhat.com>
I got a build failure when cross-compiling to mingw with the
mingw64-dbus package installed:
CC virmockdbus_la-virmockdbus.lo
../../tests/virmockdbus.c:29:6: error: 'dbus_connection_set_change_sigpipe' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
VIR_MOCK_STUB_VOID_ARGS(dbus_connection_set_change_sigpipe,
^
../../tests/virmockdbus.c:33:18: error: 'dbus_bus_get' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
VIR_MOCK_STUB_RET_ARGS(dbus_bus_get,
...
Well duh - mingw lacks dlopen and friends, even if it can support
dbus. A similar failure occured in virsystemdtest.c; but in that
file, we know that systemd is a Linux-only concept.
* tests/virmockdbus.c: Cripple on mingw.
* tests/virsystemdtest.c: Cripple on non-Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
We allow a seclabel to be specified in the <source> element
of a chardev:
<serial type='file'>
<source path='/tmp/serial.file'>
<seclabel model='dac' relabel='no'/>
</source>
</serial>
But we format it outside the source:
<serial type='file'>
<source path='/tmp/serial.file'/>
<target port='0'/>
<seclabel model='dac' relabel='no'/>
</serial>
Move the formatting inside the source to fix this to make the
seclabel persistent across XML format->parse.
Introduced by commit f8b08d0 'Add <seclabel> to character devices.'
With this patch, virDomainFSFreeze will pass the mountpoints argument
to qemu guest agent. For example,
virDomainFSFreeze(dom, {"/mnt/vol1", "/mnt/vol2"}, 2, 0)
will issue qemu guest agent command:
{"execute":"guest-fsfreeze-freeze",
"arguments":{"mountpoints":["/mnt/vol1","/mnt/vol2"]}}
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory
Enable this timestamp if the QEMU binary supports it.
Add a 'log_timestamp' option to qemu.conf for disabling this behavior.
This uses the new QEMU_CAPS_HOST_PCI_MULTIDOMAIN capability when
present, for -devivce pci-assign, -device vfio-pci, and -pcidevice.
While creating tests for this new functionality, I noticed that the
xmls for two existing tests had erroneously specified an
until-now-ignored domain="0x0002", so I corrected those two tests, and
also added two failure tests to be sure that we alert users who
attempt to use a non-zero domain with a qemu that doesn't support it.
Quite a long time ago, (apparently between qemu 0.12 and 0.13) qemu
quietly began supporting the optional specification of a domain in the
host-side address of all pci passthrough commands (by simply
prepending it to the bus:slot.function format, as
"dddd:bb:ss.f"). Since machines with multiple PCI domains are very
rare, this never came up in practice, so libvirt was never updated to
support it.
This patch takes the first step to supporting specification of a non-0
domain in the host-side address of PCI devices being assigned to a
domain, by adding a capability bit to indicate support
"QEMU_CAPS_HOST_PCI_MULTIDOMAIN", and detect it. Since this support
was added in a version prior to the minimum version required for
QMP-style capabilities detection, the capability is always enabled for
any qemu that uses QMP for capabilities detection. For older qemus,
the only clue that a domain can be specified in the host pci address
is the presence of the string "[seg:]" in the help string for
-pcidevice. (Ironically, libvirt will not be modified to support
specification of domain for -pcidevice, since any qemu new enough for
us to care about also supports "-device pci-assign" or "-device
vfio-pci", which are greatly preferred).
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This fixes link failures like:
CCLD virfirewalltest
/usr/bin/ld: virfirewalltest-virfirewalltest.o: undefined reference to
symbol 'dbus_message_iter_init_append'
When building packages in a clean chroot the QEMU_USER and QEMU_GROUP
don't exist making VirQemuDriverConfigNew fail with privileged=true.
Avoid that by not requiring privileged mode upfront but setting it later
so we skip the user/group existence check.
This solution was suggested by Daniel P. Berrange and tested by Martin
Kletzander.
gnutls-3.3.0 and newer leaves 2 FDs open in order to be backwards
compatible when it comes to chrooted binaries [1]. Linking
commandhelper with gnutls then leaves these two FDs open and
commandtest fails thanks to that. This patch does not link
commandhelper with libvirt.la, but rather only the utilities making
the test pass.
Based on suggestion from Daniel [2].
[1] http://lists.gnutls.org/pipermail/gnutls-help/2014-April/003429.html
[2] https://www.redhat.com/archives/libvir-list/2014-April/msg01119.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
strtoul() is required to parse negative numbers as their
twos-complement positive counterpart. But sometimes we want
to reject negative numbers. Add new functions to do this.
The 'p' suffix is a mnemonic for 'positive' (technically it
also parses 0, but 'non-negative' doesn't lend itself to a
nice one-letter suffix).
* src/util/virstring.h (virStrToLong_uip, virStrToLong_ulp)
(virStrToLong_ullp): New prototypes.
* src/util/virstring.c (virStrToLong_uip, virStrToLong_ulp)
(virStrToLong_ullp): New functions.
* src/libvirt_private.syms (virstring.h): Export them.
* tests/virstringtest.c (testStringToLong): Test them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f22b7899 called to light a long-standing latent bug: the
behavior of virStrToLong_ui was different on 32-bit platforms
than on 64-bit platforms. Curse you, C type promotion and
narrowing rules, and strtoul specification. POSIX says that for
a 32-bit long, strtol handles only 2^32 values [LONG_MIN to
LONG_MAX] while strtoul handles 2^33 - 1 values [-ULONG_MAX to
ULONG_MAX] with twos-complement wraparound for negatives. Thus,
parsing -1 as unsigned long produces ULONG_MAX, rather than a
range error. We WANT[1] this same shortcut for turning -1 into
UINT_MAX when parsing to int; and get it for free with 32-bit
long. But with 64-bit long, ULONG_MAX is outside the range
of int and we were rejecting it as invalid; meanwhile, we were
silently treating -18446744073709551615 as 1 even though it
textually exceeds INT_MIN. Too bad there's not a strtoui() in
libc that does guaranteed parsing to int, regardless of the size
of long.
The bug has been latent since 2007, introduced by Jim Meyering
in commit 5d25419 in the attempt to eradicate unsafe use of
strto[u]l when parsing ints and longs. How embarrassing that we
are only discovering it now - so I'm adding a testsuite to ensure
that it covers all the corner cases we care about.
[1] Ideally, we really want the caller to be able to choose whether
to allow negative numbers to wrap around to their 2s-complement
counterpart, as in strtoul, or to force a stricter input range
of [0 to UINT_MAX] by rejecting negative signs; this will be added
in a later patch for all three int types.
This patch is tested on both 32- and 64-bit; the enhanced
virstringtest passes on both platforms, while virstoragetest now
reliably fails on both platforms instead of just 32-bit platforms.
That test will be fixed later.
* src/util/virstring.c (virStrToLong_ui): Ensure same behavior
regardless of platform long size.
* tests/virstringtest.c (testStringToLong): New function.
(mymain): Comprehensively test string to long parsing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Refactor the ebiptablesTearNewRules function so that the teardown of temporary
filters can also be called by the ebiptablesAllTeardown function.
This fixes a problem that leaves temporary filters behind when a VM shuts down
while its filters are modified.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
v1->v2:
- test cases adjusted to expect more commands
Create a nwfilterxml2firewalltest to exercise the
ebiptables_driver.applyNewRules method with a variety of
different XML input files. The XML input files are taken
from the libvirt-tck nwfilter tests. While the nwfilter
tests verify the final state of the iptables chains, this
test verifies the set of commands invoked to create the
chains.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesApplyDropAllRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesApplyDHCPOnlyRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesApplyBasicRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebiptablesTearNewRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesRemoveBasicRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebiptablesTearOldRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebiptablesAllTeardown method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Using the virCommand dry run capability, capture iptables rules
created by various network XML documents.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The network and nwfilter drivers both have a need to update
firewall rules. The currently share no code for interacting
with iptables / firewalld. The nwfilter driver is fairly
tied to the concept of creating shell scripts to execute
which makes it very hard to port to talk to firewalld via
DBus APIs.
This patch introduces a virFirewallPtr object which is able
to represent a complete sequence of rule changes, with the
ability to have multiple transactional checkpoints with
rollbacks. By formally separating the definition of the rules
to be applied from the mechanism used to apply them, it is
also possible to write a firewall engine that uses firewalld
DBus APIs natively instead of via the slow firewalld-cmd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_iohelper
binary, use virFileFindResource to optionally find it in the current
build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In debugging a crash on OOM, I thought that the virInsert APIs
might be at fault, but couldn't isolate them as a cause. While
the viralloc APIs are used in many test suites, this is as a
side-effect, they are not directly tested :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Each backing store of a given disk is associated with a unique index
(which is also formatted in domain XML) for easier addressing of any
particular backing store. With this patch, any backing store can be
addressed by its disk target and the index. For example, "vdc[4]"
addresses the backing store with index equal to 4 of the disk identified
by "vdc" target. Such shorthand can be used in any API in place for a
backing file path:
virsh blockcommit domain vda --base vda[3] --top vda[2]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So far, qemuxml2xml test was only able to check if the result matches
the original or the appropriate XML in qemuxml2xmloutdata regardless on
flags used to format the XML. Since the result can be different
depending on VIR_DOMAIN_XML_INACTIVE flag being used or not, this patch
adds support for qemuxml2xmlout-%s-active.xml and
qemuxml2xmlout-%s-inactive.xml output files. If the file specific to the
flag used exists, it is used in preference to the generic
qemuxml2xmlout-%s.xml file when reading the expected output.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch implements formating and parsing code for the backing store
schema defined and documented by the previous patch.
This patch does not aim at providing full persistent storage of disk
backing chains yet. The formatter is supposed to provide the backing
chain detected when starting a domain and thus it is not formatted into
an inactive domain XML. The parser is implemented mainly for the purpose
of testing the XML generated by the formatter and thus it does not
distinguish between no backingStore element and an empty backingStore
element. This will have to change once we fully implement support for
user-supplied backing chains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The XML for quite a longish backing chain is shown below:
<disk type='network' device='disk'>
<driver name='qemu' type='qcow2'/>
<source protocol='nbd' name='bar'>
<host transport='unix' socket='/var/run/nbdsock'/>
</source>
<backingStore type='block' index='1'>
<format type='qcow2'/>
<source dev='/dev/HostVG/QEMUGuest1'/>
<backingStore type='file' index='2'>
<format type='qcow2'/>
<source file='/tmp/image2.qcow'/>
<backingStore type='file' index='3'>
<format type='qcow2'/>
<source file='/tmp/image3.qcow'/>
<backingStore type='file' index='4'>
<format type='qcow2'/>
<source file='/tmp/image4.qcow'/>
<backingStore type='file' index='5'>
<format type='qcow2'/>
<source file='/tmp/image5.qcow'/>
<backingStore type='file' index='6'>
<format type='raw'/>
<source file='/tmp/Fedora-17-x86_64-Live-KDE.iso'/>
<backingStore/>
</backingStore>
</backingStore>
</backingStore>
</backingStore>
</backingStore>
</backingStore>
<target dev='vdb' bus='virtio'/>
</disk>
Various disk types and formats can be mixed in one chain. The
<backingStore/> empty element marks the end of the backing chain and it
is there mostly for future support of parsing the chain provided by a
user. If it's missing, we are supposed to probe for the rest of the
chain ourselves, otherwise complete chain was provided by the user. The
index attributes of backingStore elements can be used to unambiguously
identify a specific part of the image chain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To avoid having the root of a backing chain present twice in the list we
need to invert the working of virStorageFileGetMetadataRecurse.
Until now the recursive worker created a new backing chain element from
the name and other information passed as arguments. This required us to
pass the data of the parent in a deconstructed way and the worker
created a new entry for the parent.
This patch converts this function so that it just fills in metadata
about the parent and creates a backing chain element from those. This
removes the duplication of the first element.
To avoid breaking the test suite, virstoragetest now calls a wrapper
that creates the parent structure explicitly and pre-fills it with the
test data with same function signature as previously used.
Remove the obsolete field replaced by data in "path".
The testsuite requires tweaking as the name of the backing file is now
stored one layer deeper in the backing chain linked list.
As for the previous patch, this change is needed to achieve
compatibility with all the existing code, where we expect a fully
qualified path of local files to be present.
To allow future change of virStorageFileMetadata to virStorageSource we
need to store a full path in the "path" variable as rest of the code
expects it to be a full path. Rename the "path" field to "relPath" to
keep tracking the info but allowing a real "path" field.
Currently, libvirt is using legacy USB controller as default. There
are problems with VGA which can't work correctly with USB Keyboard and
USB Mouse.
While providing -nodefaults, ppc64 should be specifying the usb
controller explicitly in place of using the legacy
controller(-usb). Qemu spapr initialization code when sees "-usb" adds a
USB Keyboard and USB Mouse by default. And libvirt has added a USB
keyboard and USB mouse.
A recent fix in the in qemu VGA code uncoverd this problem, which
resulted in addition of extra keyboard and mouse to the qemu machine.
This patch is to set pci-ohci as USB default controller.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
I noticed that depending on the <driver> attributes the user passed
in, the output may omit the <driver> element altogether. For example,
the rerror_policy has had this problem since commit 4bb4109 in Oct
2011. But in adding testsuite coverage to expose it, I found another
problem: the C code is just fine without a driver name, but the
XML validator required either a name or a cache mode.
* src/conf/domain_conf.c (virDomainDiskDefFormat): Update
conditional.
* docs/schemas/domaincommon.rng (diskDriver): Simplify.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.args:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Enhance test.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
Likewise.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To make <disk> schema more maintainable and to allow for moving the
pieces to a common file in the future. It relies on the ability to
override definitions as part of an include, set up in the previous
patch.
The diff is a bit hard to read, because it mixes reindentation
with refactoring; 'git diff -b --patience' may help.
* docs/schemas/domaincommon.rng (disk): Refactor into pieces.
(diskSource, diskSourceFile, diskSourceBlock, diskSourceDir)
(diskSourceVolume: New defines.
(diskSourceNetwork): Revise scope.
* docs/schemas/domainsnapshot.rng (disksnapshot): Adjust.
* tests/domainsnapshotxml2xmlin/disk-seclabel-invalid.xml,
tests/domainsnapshotxml2xmlin/disk-network-seclabel-invalid.xml: New
tests to check seclabel is forbidden in domain snapshot by schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch is my first experience playing with nested grammars,
as documented in http://relaxng.org/tutorial-20011203.html#IDA3PZR.
I plan on doing more overrides in order to make the RelaxNG
grammar mirror the C code refactoring into a common
virStorageSource, but where different clients of that source do
not support the same subset of functionality. By starting with
something fairly easy to validate, I can make sure my later
patches will be possible.
This patch adds a use of the no-op <ref
name='sourceStartupPolicy'/> to the disksnapshot definition, so
that the snapshot version of a type='file' <source> more closely
resembles the version in domaincommon. A future patch will merge
the two files into using a common define, but this patch is
sufficient for testing that adding <source
startupPolicy='optional'/> in any of the
tests/domainsnapshotxml2xmlin/*.xml files still gets rejected
unless it occurs within the <domain> subelement, because the
definition of startupPolicy is empty outside of domain.rng.
* docs/schemas/storagecommon.rng (storageStartupPolicy)
(storageSourceExtra): Create no-op defaults.
* docs/schemas/domainsnapshot.rng (domain): Use nested grammar
to avoid restricting <domain>.
(storageSourceExtra): Create new override.
(disksnapshot): Access overrides through common names.
* docs/schemas/domaincommon.rng (disk): Access overrides through
common names.
* docs/schemas/domain.rng (storageStartupPolicy)
(storageSourceExtra): Create new overrides.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In general, we try to make virt-xml-validate tolerant of input
elements in any order when possible. However, as written, the
RNG grammar did not permit <source> unless there was an explicit
type= attribute (even though the C code manages just fine by
defaulting to type='file'). After making the attribute optional
on the 'file' branch, I noticed that the use of diskspec was now
redundant with the branch when no <source> was supplied.
View this patch with 'git diff -b' for a better picture of the
schema change.
* docs/schemas/domaincommon.rng (disk): Hoist 'diskspec' out of
choice, make type='file' default, and still preserve interleave.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-source-pool.xml:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Reorder XML.
* tests/qemuxml2xmltest.c (mymain): Cover new files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another field no longer needed, getting us one step closer to
merging virStorageFileMetadata and virStorageSource.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataFromFDInternal): Alter signature.
(virStorageFileFreeMetadata, virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Adjust clients.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Thanks to the testsuite, I feel quite confident that this rewrite
is correct; it gives the same results for all cases except for one.
I can make the argument that _that_ case was a pre-existing bug:
when looking up relative names, the lookup is supposed to be
pegged to the directory that contains the parent qcow2 file. Thus,
this resolves the fixme first mentioned in commit 367cd69 (even
though I accidentally removed the fixme comment early in 74430fe).
* src/util/virstoragefile.c (virStorageFileChainLookup): Depend on
new rather than old fields.
* tests/virstoragetest.c (mymain): Adjust test to match fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
The original chain lookup code had to pass in the starting name,
because it was not available in the chain. But now that we have
added fields to the struct, this parameter is redundant.
* src/util/virstoragefile.h (virStorageFileChainLookup): Alter
signature.
* src/util/virstoragefile.c (virStorageFileChainLookup): Adjust
handling of top of chain.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Adjust caller.
* tests/virstoragetest.c (testStorageLookup, mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I realized that we had no good test coverage of looking up a
name from within a backing chain, even though code like
block-commit is relying on it.
* tests/virstoragetest.c (testStorageLookup): New function.
(mymain): New tests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Noticed while tweaking the RelaxNG grammar for <disk> elements.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-numad-static-vcpu-no-numatune.xml:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-cdrom-empty.xml:
Drop unused files.
* tests/qemuargv2xmltest.c (testInfo, DO_TEST_FULL): Drop unused
field.
Signed-off-by: Eric Blake <eblake@redhat.com>
Drop another redundant field from virStorageFileMetadata.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c
(virStorageFileGetMetadataFromFDInternal)
(virStorageFileGetMetadataFromFD)
(virStorageFileGetMetadataRecurse): Adjust callers.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Finally starting to prune away some of the old fields that have
been made redundant by the new fields, on my way towards directly
reusing virStorageSource.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileChainLookup): Adjust callers.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
So far, my work has been merely preserving the status quo of
backing file analysis. But this patch starts to tread in the
territory of making the backing chain code more powerful - we
will eventually support network storage containing non-raw
formats. Here, we expose metadata information about a network
backing store, even if that information is still hardcoded to
a raw format for now.
* src/util/virstoragefile.c (virStorageFileGetMetadataRecurse):
Also populate struct for non-file backing.
(virStorageFileGetMetadata, virStorageFileGetMetadatainternal):
Recognize non-file top image.
(virFindBackingFile): Add comment.
(virStorageFileChainGetBroken): Adjust comment, ensure output
is set.
* tests/virstoragetest.c (mymain): Update test to reflect it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm tired of alternating between test failures due to bugs in
my refactoring work, vs. test failures due to leftovers in
the file system from the previous test. This patch has no
impact when the testsuite is successful, but doeesn't hurt either.
* tests/virstoragetest.c (testPrepImages): Clean up from prior
failed test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Every test that makes use of virmock.h (only virsystemdtest as of now)
needs to be linked with -export-dynamic to make sure the LD_PRELOADed
mock library can access its wrap_* symbols. Normally,
DRIVER_MODULE_LDFLAGS variable contains -export-dynamic but when
--without-driver-modules configure option is used, DRIVER_MODULE_LDFLAGS
is empty.
This patch turns on -export-dynamic for all tests unconditionally
regardless on --without-driver-modules. This fixes virsystemdtest and
all future users of virmock.h.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
Validate that all the new fields are getting set to desired values.
* tests/virstoragetest.c (_testFileData, testStorageChain): Check
for more fields.
(mymain): Populate additional fields.
Signed-off-by: Eric Blake <eblake@redhat.com>
The testsuite is absolutely essential to feeling comfortable
about swapping the backing chain structure over to a new format.
This patch tests the path settings, and demonstrates that the
correct short name is being passed to the child.
* tests/virstoragetest.c (testStorageChain): Test path.
(mymain): Update expected data.
Signed-off-by: Eric Blake <eblake@redhat.com>
A later patch will be adding some new fields to
virStorageFileMetadata; to minimize confusion, renaming the
test fields now will make it more obvious which fields are
being tested later.
* tests/virstoragetest.c (_testFileData): Alter names.
(testStorageChain, mymain): Adjust clients.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduced in commit d1e55de3.
virstoragetest.c: In function ‘testStorageChain’:
virstoragetest.c:249:10: warning: declaration of ‘abs’ shadows a global
declaration [-Wshadow]
Another reduction in the number of structs I have to modify
when I start tracking new fields in virStorageFileMetadata.
* tests/virstoragetest.c (_testFileData): Add fields.
(testStorageChain): Select between fields based on flag.
(mymain): Record both absolute and relative expectations in one
struct.
Signed-off-by: Eric Blake <eblake@redhat.com>
As I add more tests, it's getting harder to follow the split between
a struct in one place and a test using the struct in another.
Interleaving the tests makes changes more localized, and also makes
debugging easier when a test goes wrong during my refactoring work.
* tests/virstoragetest.c (mymain): Modify structs as we go, rather
than up-front.
(testStorageChain): Make failure debugging easier.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of the upcoming refactoring will change how broken chains
are detected; it makes sense to test that this works. In
particular, test the just-fixed infinite loop detection bug.
Also, make sure that detection of directories is sane.
* tests/virstoragetest.c (testStorageChain): Enhance test.
(mymain): Add more tests.
(testCleanupImages, testPrepImages): Populate a directory.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of test suites want to mock the DBus APIs. To avoid
re-inventing the wheel create a re-usable virmockdbus.la
library for LD_PRELOAD usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce virmock.h which provides some macros to assist in
creation of LD_PRELOAD overrides. When these are used, the
LD_PRELOAD code simply has some stubs which forward to a
wrapper function inside the main test case. This means that
logic for the test no longer has to be split between the
virXXXtest.c and virXXXmock.c files. It will also make it
possible to provide some common reusable modules for mocking
code like DBus.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
to avoid
CCLD storagevolxml2argvtest
/usr/bin/ld: ../src/.libs/libvirt_driver_storage_impl.a(libvirt_driver_storage_impl_la-storage_backend.o): undefined reference to symbol 'xmlFreeDoc@@LIBXML2_2.4.30'
//usr/lib/x86_64-linux-gnu/libxml2.so.2: error adding symbols: DSO missing from command line
I almost wrote a hash value free function that just called
VIR_FREE, then realized I couldn't be the first person to
do that. Sure enough, it was worth factoring into a common
helper routine.
* src/util/virhash.h (virHashValueFree): New function.
* src/util/virhash.c (virHashValueFree): Implement it.
* src/util/virobject.h (virObjectFreeHashData): New function.
* src/libvirt_private.syms (virhash.h, virobject.h): Export them.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit): Use
common function.
* src/qemu/qemu_capabilities.c (virQEMUCapsCacheNew): Likewise.
* src/qemu/qemu_command.c (qemuDomainCCWAddressSetCreate):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorGetBlockInfo): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/util/virclosecallbacks.c (virCloseCallbacksNew): Likewise.
* src/util/virkeyfile.c (virKeyFileParseGroup): Likewise.
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBlockInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit d7c4e0036 assumed all SELinux tests depended upon
securityselinuxhelper need xattr support, but forgot to
move viridentitytest under WITH_ATTR.
Reported-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Up until now the traffic control filters for the vNIC QoS were
matching only ip traffic. For egress traffic that was unnoticed
because the unmatched traffic would just go to the default htb class
and be shaped anyway. For ingress, though, since the policing of the
rate is done by the filter itself.
The problem is solved by changing protocol to all and making anything
match the filter.
Bug-Url: https://bugzilla.redhat.com/1084444
Signed-off-by: Antoni S. Puimedon <asegurap@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I'm about to add fields to virStorageFileMetadata, which means
also adding fields to the testFileData struct in virstoragetest.
Alas, adding even one pointer on an x86_64 machine gave me a
dreaded compiler error:
virstoragetest.c:712:1: error: the frame size of 4208 bytes is larger than 4096 bytes [-Werror=frame-larger-than=]
After some experimentation, I realized that each test was creating
yet another testChainData (which contains testFileData) on the stack;
forcing the reuse of one of these structures instead of creating a
fresh one each time drastically reduces the size requirements. While
at it, I also got rid of a lot of intermediate structs, with some
macro magic that lets me directly build up the destination chains
inline.
For a bit more insight into what this patch does:
The old code uses an intermediate variable as a fixed-size array
of structs:
testFileData chain[] = { a, b };
data.files = chain;
In the new code, the use of VIR_FLATTEN_* allows the TEST_CHAIN()
macro to still take a single argument for each chain, but now of
the form '(a, b)', where it is turned into the var-args 'a, b'
multiple arguments understood by TEST_ONE_CHAIN(). Thus, the
new code avoids an intermediate variable, and directly provides
the list of pointers to be assigned into array elements:
data.files = { &a, &b };
* tests/virstoragetest.c (mymain): Rewrite TEST_ONE_CHAIN to
reuse the same struct for each test, and to take the data
inline rather than via intermediate variables.
(testChainData): Use bounded array of pointers instead of
unlimited array of struct.
(testStorageChain): Reflect struct change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Writing this test with C99 initializers will make it easier to test
additions and deletions to struct members as I refactor the code.
* tests/virstoragetest.c (mymain): Rewrite initializers.
Signed-off-by: Eric Blake <eblake@redhat.com>
No need to spawn a child 'rm' process when we can do it ourselves.
* tests/virstoragetest.c (testCleanupImages): Use dedicated
helper.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch will merge virStorageFileMetadata and virStorageSource,
but I found it easier to do if both structs use the same information
for tracking whether a source file needs encryption keys.
* src/util/virstoragefile.h (_virStorageFileMetadata): Prepare
full encryption struct instead of just a bool.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Use transfer semantics.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Populate struct.
(virStorageFileFreeMetadata): Adjust clients.
* tests/virstoragetest.c (testStorageChain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile. As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file. This sets up the fields for
the tracking, although it does not modify XML to display any
new information.
* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
While running virdbustest, it was found that valgrind pointed out
the following memory leaks:
==9996== 17 (8 direct, 9 indirect) bytes in 1 blocks are definitely lost in loss record 9 of 36
==9996== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==9996== by 0x4A06B62: realloc (vg_replace_malloc.c:662)
==9996== by 0x4C6B587: virReallocN (viralloc.c:245)
==9996== by 0x4C6B6AE: virExpandN (viralloc.c:294)
==9996== by 0x4C82B54: virDBusMessageDecodeArgs (virdbus.c:907)
==9996== by 0x4C83463: virDBusMessageDecode (virdbus.c:1141)
==9996== by 0x402C45: testMessageArrayRef (virdbustest.c:273)
==9996== by 0x404E71: virtTestRun (testutils.c:201)
==9996== by 0x401C2D: mymain (virdbustest.c:479)
==9996== by 0x4055ED: virtTestMain (testutils.c:789)
==9996== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==9996==
==9996== 28 (16 direct, 12 indirect) bytes in 1 blocks are definitely lost in loss record 12 of 36
==9996== at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==9996== by 0x4C6B587: virReallocN (viralloc.c:245)
==9996== by 0x4C6B6AE: virExpandN (viralloc.c:294)
==9996== by 0x4C82B54: virDBusMessageDecodeArgs (virdbus.c:907)
==9996== by 0x4C83463: virDBusMessageDecode (virdbus.c:1141)
==9996== by 0x402C45: testMessageArrayRef (virdbustest.c:273)
==9996== by 0x404E71: virtTestRun (testutils.c:201)
==9996== by 0x401C2D: mymain (virdbustest.c:479)
==9996== by 0x4055ED: virtTestMain (testutils.c:789)
==9996== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==9996==
Signed-off-by: Eric Blake <eblake@redhat.com>
Windows doesn't allow : in filenames.
Commit 6fdece9a33 added files with a : in
their names. This broke git operations on Windows as git is not able to
create those files on clone or pull.
Replace : with - in the offending filenames and adapt the test case.
As the tested Linux specific code expects the files to exist with : in
their path use symlinks to provide the name that way.
While running qemucaps2xmltest, it was found that valgrind pointed out
the following memory leaks:
==27045== 160 (112 direct, 48 indirect) bytes in 1 blocks are definitely lost in loss record 51 of 65
==27045== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==27045== by 0x4C6BACD: virAllocVar (viralloc.c:560)
==27045== by 0x4CAF095: virObjectNew (virobject.c:193)
==27045== by 0x421453: virQEMUCapsNew (qemu_capabilities.c:1805)
==27045== by 0x41F04F: testQemuCapsXML (qemucaps2xmltest.c:72)
==27045== by 0x41FFD1: virtTestRun (testutils.c:201)
==27045== by 0x41EE7A: mymain (qemucaps2xmltest.c:203)
==27045== by 0x42074D: virtTestMain (testutils.c:789)
==27045== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==27045==
==27045== 160 (112 direct, 48 indirect) bytes in 1 blocks are definitely lost in loss record 52 of 65
==27045== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==27045== by 0x4C6BACD: virAllocVar (viralloc.c:560)
==27045== by 0x4CAF095: virObjectNew (virobject.c:193)
==27045== by 0x421453: virQEMUCapsNew (qemu_capabilities.c:1805)
==27045== by 0x41F04F: testQemuCapsXML (qemucaps2xmltest.c:72)
==27045== by 0x41FFD1: virtTestRun (testutils.c:201)
==27045== by 0x41EEA3: mymain (qemucaps2xmltest.c:204)
==27045== by 0x42074D: virtTestMain (testutils.c:789)
==27045== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
At this point unittest covers 4 basic cases:
- minimal working XML for bhyve
- same as above, but with virtio disk
- ACPI and APIC args test
- MAC address test
A patch submitted by Steven Malin last week pointed out a problem with
libvirt's DNS SRV record configuration:
https://www.redhat.com/archives/libvir-list/2014-March/msg00536.html
When searching for that message later, I found another series that had
been posted by Guannan Ren back in 2012 that somehow slipped between
the cracks:
https://www.redhat.com/archives/libvir-list/2012-July/msg00236.html
That patch was very much out of date, but also pointed out some real
problems.
This patch fixes all the noted problems by refactoring
virNetworkDNSSrvDefParseXML() and networkDnsmasqConfContents(), then
verifies those fixes by added several new records to the test case.
Problems fixed:
* both service and protocol now have an underscore ("_") prepended on
the commandline, as required by RFC2782.
<srv service='sip' protocol='udp' domain='example.com'
target='tests.example.com' port='5060' priority='10'
weight='150'/>
before: srv-host=sip.udp.example.com,tests.example.com,5060,10,150
after: srv-host=_sip._udp.example.com,tests.example.com,5060,10,150
* if "domain" wasn't specified in the <srv> element, the extra
trailing "." will no longer be added to the dnsmasq commandline.
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060' priority='10' weight='150'/>
before: srv-host=sip.udp.,tests.example.com,5060,10,150
after: srv-host=_sip._udp,tests.example.com,5060,10,150
* when optional attributes aren't specified, the separating comma is
also now not placed on the dnsmasq commandline. If optional
attributes in the middle of the line are not specified, they are
replaced with a default value in the commandline (1 for port, 0 for
priority and weight).
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060'/>
before: srv-host=sip.udp.,tests.example.com,5060,,
after: srv-host=_sip._udp,tests.example.com,5060
(actually the would have generated an error, because "optional"
attributes weren't really optional.)
* The allowed characters for both service and protocol are now limited
to alphanumerics, plus a few special characters that are found in
existing names in /etc/services and /etc/protocols. (One exception
is that both of these files contain names with an embedded ".", but
"." can't be used in these fields of an SRV record because it is
used as a field separator and there is no method to escape a "."
into a field.) (Previously only the strings "tcp" and "udp" were
allowed for protocol, but this restriction has been removed, since
RFC2782 specifically says that it isn't limited to those, and that
anyway it is case insensitive.)
* the "domain" attribute is no longer required in order to recognize
the port, priority, and weight attributes during parsing. Only
"target" is required for this.
* if "target" isn't specified, port, priority, and weight are not
allowed (since they are meaningless - an empty target means "this
service is *not available* for this domain").
* port, priority, and weight are now truly optional, as the comments
originally suggested, but which was not actually true.
In all other drivers we are doing so. Moreover, we don't want to parse
runtime information in attach (even if the attach is meant as live)
because we are generating the runtime info ourselves. We can't trust
users they supply sane values anyway.
==1140== 9 bytes in 1 blocks are definitely lost in loss record 72 of 1,151
==1140== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==1140== by 0x623C758: xmlStrndup (in /usr/lib64/libxml2.so.2.9.1)
==1140== by 0x50FD763: virXMLPropString (virxml.c:483)
==1140== by 0x510F8B7: virDomainDeviceInfoParseXML (domain_conf.c:3685)
==1140== by 0x511ACFD: virDomainChrDefParseXML (domain_conf.c:7535)
==1140== by 0x5121D13: virDomainDeviceDefParse (domain_conf.c:9918)
==1140== by 0x13AE6313: qemuDomainAttachDeviceFlags (qemu_driver.c:6926)
==1140== by 0x13AE65FA: qemuDomainAttachDevice (qemu_driver.c:7005)
==1140== by 0x51C77DA: virDomainAttachDevice (libvirt.c:10231)
==1140== by 0x127FDD: remoteDispatchDomainAttachDevice (remote_dispatch.h:2404)
==1140== by 0x127EC5: remoteDispatchDomainAttachDeviceHelper (remote_dispatch.h:2382)
==1140== by 0x5241F81: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
When doing live attach, we are passing the inactive definition anyway
since we are passing the result of virDomainDeviceDefCopy() which does
inactive copy by default.
Moreover, we are doing the same mistake in qemuhotplugtest.
Just a side note - it makes perfect sense to parse the runtime info
like alias in qemuDomainDetachDevice and qemuDomainUpdateDeviceFlags()
as in some cases the only difference to distinguish two devices can be
just their alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The test is loosely inspired from qemucapabilitiestest
and qemuxml2xmltest.
Added a new test instead of extending an existing one because
the feature being tested don't really fits nicely in any
existing place.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
Recent changes in the module seemed to have caused Coverity to reanalyze
certain parts of the code. Previously the code was modified via commit
id '11a11812' to resolve a different error (perhaps DEADCODE). Up through
commit id '7b3f1f8c' there were no issues.
The new error indicats the 'outbuf' was checked for NULL and then complains
because of the dereference. Adding checks for non-NULL prior to the deref
resulted in a DEADCODE message.
So, resolve using an sa_assert() to keep Coverity quiet especially since
it doesn't understand that outbuf will change as a result of a successful
virCommandRun() call.
This patch adds qemuMonitorGetDumpGuestMemoryCapability, which is used to check
whether the specified dump-guest-memory format is supported by qemu.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the DBus helper APIs require the values for an array
to be passed inline in the variadic argument list. This change
introduces support for passing arrays using a pointer to a plain
C array of the basic type. This is of particular benefit for
decoding messages when you don't know how many array elements
are being received.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dbus_connection_send_with_reply_and_block method will
automatically call dbus_set_error_from_message for us. We
mistakenly thought we had todo it because of a flaw in the
systemd unit test mock impl. The latter should have directly
set the error object, instead of creating an error message
object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virSocketAddrMask method did not initialize all fields
in the sockaddr_in6 struct. In paticular the 'sin6_scope_id'
field could contain random garbage, which would in turn
affect the result of any later virSocketAddrFormat calls.
This led to ip6tables rules in the FORWARD chain which
matched on random garbage sin6_scope_id. Fortunately these
were ACCEPT rules, so the impact was merely that desired
traffic was blocked, rather than undesired traffic allowed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While running qemuhotplugtest, it was found that valgrind pointed out
the following memory leak:
==7906== 5 bytes in 1 blocks are definitely lost in loss record 7 of 121
==7906== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==7906== by 0x3E782A754D: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==7906== by 0x4CDAE03: virDomainDeviceInfoParseXML.isra.32 (domain_conf.c:3685)
==7906== by 0x4CE3BB9: virDomainNetDefParseXML (domain_conf.c:6707)
==7906== by 0x4CFBA08: virDomainDefParseXML (domain_conf.c:12235)
==7906== by 0x4CFBC1E: virDomainDefParseNode (domain_conf.c:13039)
==7906== by 0x4CFBD95: virDomainDefParse (domain_conf.c:12981)
==7906== by 0x41FEB4: testQemuHotplug (qemuhotplugtest.c:66)
==7906== by 0x420F41: virtTestRun (testutils.c:201)
==7906== by 0x41F287: mymain (qemuhotplugtest.c:422)
==7906== by 0x4216BD: virtTestMain (testutils.c:784)
==7906== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
...and 10 more.
Problem is, since 20745748 we do both, parse <alias/> elements from
XML files and call qemuAssignDeviceAliases(). While generating runtime
info for domain at runtime is just fine in the test, we can parse just
inactive XML and remove all <alias/>-es from the XML files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I forgot to delete the underscore in object_locking_SOURCES when
changing the name in one of previous cleanups.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
To allow for fault injection of the virCommand dry run,
add the ability to register a callback. The callback will
be passed the argv, env and stdin buffer and is expected
to return the exit status and optionally fill stdout and
stderr buffers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.
The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.
Found by:
git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When ran, cil is throwing out some errors and warnings for obsolete
'or' unused variables and wrong module name (it should not contain a
hyphen; hence the rename).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introducing keepalive similarly to Guannan around 2 years ago. Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.
Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.
This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server). If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
GNULIB provides APIs for calculating md5 and sha256 hashes,
but these APIs only return you raw byte arrays. Most users
in libvirt want the hash in printable string format. Add
some helper APIs in util/vircrypto.{c,h} for doing this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
