This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the network driver code there's networkKillDaemon() which is
the same as virProcessKillPainfully(). Replace the former with
the later and drop what becomes unused function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the virtiofsd will have the pidfile open
and locked we can use virPidFileForceCleanupPath() to kill it and
unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that we know that the slirp helper will have the pidfile
open and locked we can use virPidFileForceCleanupPath() to kill
it and unlink the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now, that our virCommandSetPidFile() is more intelligent we don't
need to rely on the daemon to create and lock the pidfile and use
virCommandSetPidFile() at the same time.
NOTE that as advertised in the previous commit, this was
temporarily broken, because both virCommand and
qemuProcessStartManagedPRDaemon() would try to lock the pidfile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Our virCommand module allows us to set a pidfile for commands we
want to spawn. The caller constructs the string of pidfile path
and then uses virCommandSetPidFile() to tell the module to write
the pidfile once the command is ran. This usually works, but has
two flaws:
1) the child process does not hold the pidfile open & locked.
Therefore, the caller (or anybody else) can't use our fancy
virPidFileForceCleanupPath() function to kill the command
afterwards. Also, for everybody else on the system it's
needlessly harder to check if the pid from the pidfile is still
alive or not.
2) if the caller ever makes a mistake and passes the same pidfile
path for two different commands, the start of the second command
will overwrite the pidfile even though the first command might
still be running.
NOTE that this temporarily renders some command spawning
unusable, specifically those code patterns where both
virCommandSetPidFile() is used together with instructing spawned
command to acquire pidfile itself. Fortunately, there is only one
occurrence of such pattern and it is in
qemuProcessStartManagedPRDaemon(). This is fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
As a part of c799d150d5 I've introduced a test case that
tests whether passing error object between processes works. The
test spawns a child which reports a system error, parent process
then reads the error and compares with expected output. Problem
with this approach is that error message contains stringified
errno which is not portable. FreeBSD has generally different
messages than Linux. Therefore, use g_strerror() to do the errno
to string translation for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our code allows snapshots of NVMe based disks which means we create
overlay file with a 'json:{}' pseudo-uri refering to the NVME device.
Our parser code doesn't handle them though. Add the parser and test it
via the XML->json->XML round-trip and reference data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format cookies into the backing store string without encryption as they
will not be visible on the command line when formatting a 'target' only
string. In cases when cookies or other options are used we must use the
JSON format rather than pure URI.
Add tests to validate the scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce qemuBlockStorageSourceGetCookieString which does the
concatenation so that we can reuse it later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU requires an extra wrapper object where only the "file" member is
populated. This is basically a placeholder for establishing the format
layer. We did the same in qemuDiskSourceGetProps for the old-school
JSON usage with -drive but forgot to adopt this for -blockdev.
https://bugzilla.redhat.com/show_bug.cgi?id=1804617
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemublocktest showed that we don't add the "fat:" prefix for directory
storage when formatting the backing store string. While it's unlikely to
be used it's simple enough to actually implement the support rather than
trying to forbid it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With -blockdev libvirt provides the string which is recorded as
'backing store' property of an image to qemu. Add testing for
qemuBlockGetBackingStoreString which generates these strings as there's
logic which determines which format to use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We had two non-syncrhonized arrays holding the individual data. This was
a lazy way to do it when I was adding new tests recently. Since it's
hard to extend with new data to test refactor the storage of test data
to use a new struct where all per-image data are kept and can be
extended easily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for pretty-printing of the JSON variant of the output for
consumption in tests. All current callers pass 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function was misplaced. Group it together with other helper
functions for testing disk XML to qemu JSON props conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic variable clearing and remove the cleanup sections of
testQemuDiskXMLToProps, testQemuDiskXMLToPropsValidateSchema and
testQemuDiskXMLToPropsValidateFile.
testQemuDiskXMLToPropsValidateFileSrcOnly already uses new helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_TRISTATE_BOOL_ABSENT which maps to the 'default' string would not be
parsed back, so we shouldn't format it either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Based on the configuration from the only qemuxml2argv test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While 'namespace' is not a reserved word in C, it is in C++. Our
compilers are happy with it but syntax-hilighting in some editors
hilights is as a keyword. Rename it to prevent confusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHostCPUGetStatsLinux walks through every cpu in /proc/stat until it
finds cpu%cpuNum that matches with the requested cpu.
If none is found it logs the error but it should return -1, instead of 0.
Otherwise virsh nodecpustats --cpu <invalid cpu number> and API bindings
don't fail properly, printing a blank line instead of an error message.
This patch also includes an additional test for virhostcputest to avoid
this regression to happen again in the future.
Fixes: 93af79fba3
Reported-by: Satheesh Rajendran <satheera@in.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There is no need to repeat the shortName, since it's
already present in the directory path.
Also use just 'fs' instead of 'virtiofsd'.
https://bugzilla.redhat.com/show_bug.cgi?id=1816577
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.
Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.
Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.
This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.
Next patch will use this new element to add NVDIMM support
for ppc64.
[1] ee3a71e366
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update ppc64 capabilities to pick up the new NVDIMM capability
support for ppc64.
Since the ppc64 capabilities weren't updated for some time, the
bulk of the changes here are related to the blockdev support
(see commit c6a9e54ce3 for info) that we are picking up just
now.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In previous patches virKeyFile was replaced with its GLib
counterpart which created an incompatible change: comments can
now begin only with a number sign (#). While this won't probably
affect anyone, mention it in the release notes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace libvirt's virKeyFile by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function changes the amount of time that libvirt waits for a
response from the guest agent for all guest agent commands. Since this
is a configuration change, it should not be allowed on read-only
connections.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The agent 'guest-sync' command historically had a 5s response timeout
which was different from other agent commands, which waited forever.
When we added the ability to customize the response timeout for guest
agent commands, we intended to continue to use 5s for 'guest-sync' when
the user specified a response timeout greater than 5s, and use the
user-specified timeout if it was below 5s. Unfortunately, when
attempting to determine whether the user-specified timeout was less than
5s, we were comparing against an enum value of
VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT (which is -1) rather than against
the actual time value that it represented (5).
This change makes it so that 'guest-sync' now uses the user-specified
tiemout if it is less than 5s.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use existing function built for this exact purpose.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a QEMU process dies in the middle of a hotplug, then we fail
to restore the seclabels on the device. The problem is that if
the thread doing hotplug locks the domain object first and thus
blocks the thread that wants to do qemuProcessStop(), the
seclabel cleanup code will see vm->pid still set and mount
namespace used and therefore try to enter the namespace
represented by the PID. But the PID is gone really and thus
entering will fail and no restore is done. What we can do is to
try enter the namespace (if requested to do so) but if entering
fails, fall back to no NS mode.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1814481
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
When running a function in a forked child, so far the only thing
we could report is exit status of the child and the error
message. However, it may be beneficial to the caller to know the
actual error that happened in the child.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The @src is not always a file. It may also be a directory (for
instance qemuDomainCreateDeviceRecursive() assumes that) - even
though it doesn't happen usually. Anyway, mount() can mount only
a dir onto a dir and a file onto a file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The @devPath variable is not modifiable. It merely just points to
string containing path where private devtmpfs is being
constructed. Make it const so it doesn't look weird that it's not
freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
If building namespace fails somewhere in the middle (that is some
files exists under devMountsSavePath[i]), then plain rmdir() is
not enough to remove dir. Umount the temp location and use
virFileDeleteTree() to remove the directory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
The virFileMakePathWithMode() which is our recursive version of
mkdir() fails, it simply just returns a negative value with errno
set. No error is reported (as compared to virFileTouch() for
instance).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Validate that we are able to parse back the dotted syntax arrays we were
generating in the pre-blockdev era.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For the few instances where we'd generate an array in dotted syntax we
should be able to parse it back. Add another step in deflattening of the
dotted syntax which reconstructs the arrays so that the backing store
parser can parse it.
https://bugzilla.redhat.com/show_bug.cgi?id=1466177
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract the code so that there's a clean separation once we'll want do
do other steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory handling to remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virBitmapNewEmpty can't fail now so we can make it obvious and fix all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
