Commit Graph

347 Commits

Author SHA1 Message Date
Daniel P. Berrange
9f135031ff Add a plugin for the 'sanlock' project
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.

* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
2011-06-02 10:54:01 +01:00
Richard W.M. Jones
ee9ceb3295 libvirt.spec: /var/cache/libvirt should be 0711.
This allows qemu to create files in /var/cache/libvirt/qemu/, and
specifically is required to fix virDomainMemoryPeek.
2011-05-20 16:18:11 +01:00
Daniel Veillard
9b889aacef Release of libvirt-0.9.1
* configure.ac libvirt.spec.in docs/news.html.in: update and document
  the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
  and vietnamese coming from transifex, regenerate
2011-05-05 11:25:13 +08:00
Alan Pevec
16d6b0d80a Experimental libvirtd upstart job
To install it, disable libvirtd sysv initscript:
    chkconfig libvirtd off
    service libvirtd stop

and enable libvirtd upstart job:
    cp  /usr/share/doc/libvirt-*/libvirtd.upstart \
        /etc/init/libvirtd.conf
    initctl reload-configuration
    initctl start libvirtd

Test:
    initctl status libvirtd
libvirtd start/running, process 3929
    killall -9 libvirtd
    initctl status libvirtd
libvirtd start/running, process 4047

I looked into the possibility to use the upstart script from Ubuntu or
at least getting inspiration from it but that's not possible. "expect
daemon" is a nice thing but it only works if the process is defined with
exec stanza instead of script ... no script. Unfortunately, with exec
stanza environment variables can only be set within upstart script
(i.e., configuration in /etc/sysconfig/libvirtd can't work). Hence, we
need to use script stanza, source sysconfig, and execute libvirtd
without --daemon. For similar reasons we can't use limit stanza and need
to handle DAEMON_COREFILE_LIMIT in job's script.
2011-04-18 11:38:30 +02:00
Daniel P. Berrange
a7e80bde11 Fix typo in systemtap tapset directory name
The systemtap directory for tapsets is called

  /usr/share/systemtap/tapset

Not

 /usr/share/systemtap/tapsets

* daemon/Makefile.am,libvirt.spec.in: s/tapsets/tapset/
2011-04-05 17:44:12 +01:00
Daniel Veillard
d17e438ad3 Release of libvirt-0.9.0
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update polish translation and regenerate
2011-04-04 20:15:45 +08:00
Daniel Veillard
1613912dc2 Add libvirt_iohelper to spec file
The new iohelper binary was missing from the packaging spec
2011-03-30 08:54:23 +08:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Eric Blake
206fc979b1 rpm: add missing dependencies
Among others, the missing radvd dependency showed up as:

error: Failed to start network ipv6net
error: Cannot find radvd - Possibly the package isn't installed: No such file
or directory

even when radvd was installed, because the RADVD preprocessor
symbol was missing at configure time.

* libvirt.spec.in (with_network): Add BuildRequires for radvd,
iptables, and ip6tables.
(BuildRequires): Add libxslt and augeas for docs and test.
(with_libvirtd): Add module-init-tools for modprobe.
(with_nwfilter): Add BuildRequires for ebtables.
(with_esx): Fix esx build on RHEL 5, thanks to curl-devel rename.
2011-03-23 11:16:49 -06:00
Eric Blake
7ee06f334b rpm: separate runtime and build requirements
* libvirt.spec.in (Requires): Reorganize requirements a bit; no
functional change.
2011-03-23 11:03:23 -06:00
Daniel P. Berrange
3c204d7d5b Disable libxl build in RPM on Fedora < 16
The xen RPM in Fedora isn't new enough to support libxl builds
yet. Disable it until Fedora 16

* libvirt.spec.in: Disable libxl on Fedora < 16
2011-03-22 14:25:51 +00:00
Jim Fehlig
2b84e445d5 Add libxenlight driver
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0.  The driver is stateful and runs
privileged only.

Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI.  Driver selection is based on the status
of xend.  If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified.  If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.

V6:
 - Address several code style issues noted by Daniel Veillard
 - Make drive work with xen:/// URI
 - Hold domain object reference while domain is injected in
   libvirt event loop.  Race found and fixed by Markus Groß.

V5:
 - Ensure events are unregistered when domain private data
   is destroyed.  Discovered and fixed by Markus Groß.

V4:
 - Handle restart of libvirtd, reconnecting to previously
   started domains
 - Rebased to current master
 - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)

V3:
  - Reserve vnc port within driver when autoport=yes

V2:
  - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
  - Rebased to current master
  - Plug memory leaks found by Stefano Stabellini and valgrind
  - Handle SHUTDOWN_crash domain death event

[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-03-18 08:57:48 -06:00
Eric Blake
80e6200f32 build: improve rpm generation for distro backports
When building for an older distro, it's convenient to just
tell rpmbuild to define dist (for example, to .el6_0), rather
than also remembering to define rhel to 6.

* libvirt.spec.in: Guess %{rhel} based on %{dist}.
Based on an idea by Jiri Denemark.
2011-03-16 11:56:00 -06:00
Daniel Veillard
e7aeed0067 Add logrotate support for libvirtd.log
As the file may grow quite a bit especially with debug turned on.
* daemon/libvirtd.logrotate.in daemon/Makefile.am libvirt.spec.in:
  add new logrotate file for the daemon log
2011-03-04 22:43:55 +08:00
Eric Blake
e57f834547 build: add dependency on gnutls-utils
* libvirt.spec.in (Requires): Add gnutls-utils, for virt-pki-validate.
Suggested by Daniel P. Berrange.
2011-02-21 11:18:35 -07:00
Osier Yang
39164c11d3 Requires gettext for client package
libvirt-guests invokes functions in gettext.sh, so we need to
require gettext package in spec file.

Demo with the fix:
% rpm -q gettext
package gettext is not installed

% rpm -ivh libvirt-client-0.8.8-1.fc14.x86_64.rpm
error: Failed dependencies:
	gettext is needed by libvirt-client-0.8.8-1.fc14.x86_64

* libvirt.spec.in
2011-02-18 13:45:13 +08:00
Laine Stump
5754dbd56d Give each virtual network bridge its own fixed MAC address
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463

The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".

The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).

Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.

I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.

Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).

docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
    auto-generate mac address when needed,
    create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
2011-02-17 13:36:32 -05:00
Osier Yang
df1011ca8e storage: Allow to delete device mapper disk partition
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Error: Expecting a partition number.

This patch introduces 'dmsetup' to fix it.

Changes:
  - New function "virIsDevMapperDevice" in "src/utils/utils.c"
  - remove "is_dm_device" in "src/storage/parthelper.c", use
    "virIsDevMapperDevice" instead.
  - Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
  - Check "dmsetup" in 'configure.ac' for "with-storage-disk"
  - Changes on "src/Makefile.am" to link against libdevmapper
  - New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"

Changes from v1 to v3:
  - s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
  - replace "virRun" with "virCommand"
  - sort the list of util functions in "libvirt_private.syms"
  - ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.

e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted

Name                 Path
-----------------------------------------
2011-02-17 15:29:07 +08:00
Daniel Veillard
43f8773c1f Release of libvirt-0.8.8
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
2011-02-17 12:11:03 +08:00
Daniel P. Berrange
cee61fc298 Imprint all logs with version + package build information
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:13:28.013: 17536: info : libvirt version: 0.8.7
 18:13:28.013: 17536: debug : virInitialize:361 : register drivers
 ...

The 'configure' script gains two new arguments which can be
used as

   --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
   --with-packager-version="1.fc14"

to allow distros to append a custom string with package specific
data.

The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
 18:14:52.086: 17551: debug : virInitialize:361 : register drivers

Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds

* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
2011-02-11 14:13:08 +00:00
Jiri Denemark
b9c1a9cbff spec: Start libvirt-guests only if it's on in current runlevel 2011-01-19 15:01:52 +01:00
Daniel Veillard
6675e00744 Release of libvirt-0.8.7
* configure.ac libvirt.spec.in docs/news.html.in: bump version and add
  documentation
* po/*po*: regenerate po and pot files
2011-01-04 03:37:17 +01:00
Wen Congyang
3b13d25232 build: fix building error when building without libvirtd
When I build libvirt without libvirtd, I receive some errors:
cp: cannot stat `/home/wency/rpmbuild/BUILDROOT/libvirt-0.8.6-1.el6.x86_64/etc/libvirt/qemu/networks/default.xml': No such file or directory

My build step:
# ./autogen.sh --without-libvirtd
# make dist
# rpmbuild --nodeps --define "_sourcedir `pwd`" --define "_without_libvirtd 1" -ba libvirt.spec

The reason is we disable network when we do not build libvirt daemon in configure.ac.
After fixing this bug, I build libvirt without libvirtd, I receive other errors:
RPM build errors:
    Installed (but unpackaged) file(s) found:
   /usr/share/doc/libvirt-0.8.6/html/32favicon.png
   /usr/share/doc/libvirt-0.8.6/html/api.html
..

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2010-12-24 07:31:34 -07:00
Jiri Denemark
40dbbd6e5f spec: Enable ESX driver on RHEL 2010-12-23 23:13:09 +01:00
Daniel P. Berrange
318a4f6be9 spec: Automatically turn on cgconfig service
A number of the libvirt APIs require the use of cgroups. This is not
enabled by default on a RHEL6 install. After discussion with cgroups
team, it was decided that upon installation of the libvirt RPM, we
should automatically turn on the cgroups service. This will activate a
default configuration that turns on all cgroups controllers libvirt
requires for full operation.
2010-12-23 23:13:07 +01:00
Eric Blake
973ada0e0b build: skip vmware driver when building for RHEL
* libvirt.spec.in: Provide vmware conditionals.
2010-12-21 10:13:50 -07:00
Dan Kenigsberg
91b3e1038f spec: do not start libvirt-guests if that service is off
starting a service during rpm installation is impolite. It is even worse if done
during upgrade, for a service that was explicitly turned off.
2010-12-09 16:55:48 -07:00
Daniel Veillard
a33db6cbfb Release of libvirt 0.8.6
- configure.ac libvirt.spec.in: bump version, add a missing systemtap
  build requirement
- docs/news.html.in: add informations about the release
- po/*: updated Polish and Dutch localizations, and regenerated
- tests/qemuxml2argvtest.c: Fix build problem
2010-11-30 20:42:46 +01:00
Cole Robinson
34d8ca2b7e rpm: Fix summary wording 2010-11-12 10:07:33 -05:00
Eric Blake
f970d802ab rpm: fix /var/lib/libvirt permissions
https://bugzilla.redhat.com/show_bug.cgi?id=649511

Regression of forcing 0700 permissions (which breaks guest startup
because the qemu user can't see /var/lib/libvirt/*.monitor) was
introduced in commit 66823690e, as part of libvirt 0.8.2.

* libvirt.spec.in (%files): Drop %{_localstatedir}/lib/libvirt,
since libvirt depends on libvirt-client.
(%files client): Guarantee 755 permissions on
%(_localstatedir}/lib/libvirt, since the qemu user must be able to
do pathname resolution to a subdirectory.
2010-11-10 09:00:47 -07:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel Veillard
4c2b3e1d29 Release of libvirt-0.8.5
* configure.ac libvirt.spec.in: new version
* docs/news.html.in: update news page and improve format
* po/*.po*: Update po again
2010-10-29 16:54:07 +02:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Dan Kenigsberg
0df552cd37 qemu: let qemu group look below /var/lib/libvirt/qemu/
Vdsm needs to communicate with its guest agent via unix domain socket,
which qemu creates due to the following domain xml device:

    <channel type='unix'>
      <target type='virtio' name='com.redhat.rhevm.vdsm'/>
      <source mode='bind' path='/var/lib/libvirt/qemu/channels/fcp-xp-1.com.redhat.rhevm.vdsm'/>
    </channel>

The location of the socket below /var/lib/libvirt/qemu/channels makes
sense, to humans and selinux policy alike. However, that socket should
be accessible to vdsm, too.

Due to other (storage) reasons, vdsm is to join the "qemu" group. With
this patch, vdsm can look below /var/lib/libvirt/qemu and connect to the
socket.

The socket itself should be chmod'ed to allow qemu group read/write, but
that's for another project.

BZ#643407
2010-10-18 10:23:03 -06:00
Eric Blake
e3e31303d5 build: skip xenapi driver when building for RHEL
https://bugzilla.redhat.com/show_bug.cgi?id=643118

* libvirt.spec.in: Provide xenapi conditionals.
2010-10-15 07:31:36 -06:00
Daniel Veillard
9a8e152fef Libvirt release 0.8.4
update news, spec and french localizaton
2010-09-10 17:24:36 +02:00
Jiri Denemark
ad026e97bf build: Fix permissions of sysconfig files 2010-09-07 10:03:14 +02:00
Jiri Denemark
5cb7316372 spec: Fix undefined with_libnl
When building libvirt RPM without macvtap, with_libnl would be
undefined.
2010-08-25 12:28:02 +02:00
Jiri Denemark
e26672f786 bridge: Add --dhcp-no-override option to dnsmasq
--dhcp-no-override description from dnsmasq man page:

      Disable  re-use  of  the  DHCP servername and filename fields as
      extra option space. If it can, dnsmasq moves the boot server and
      filename  information  (from  dhcp-boot)  out of their dedicated
      fields into DHCP options. This make extra space available in the
      DHCP  packet  for options but can, rarely, confuse old or broken
      clients. This flag forces "simple and safe" behaviour  to  avoid
      problems in such a case.

It seems some virtual network card ROMs are this old/buggy so let's add
--dhcp-no-override as a workaround for them. We don't use extra DHCP
options so this should be safe. The option was added in dnsmasq-2.41,
which becomes the minimum required version.
2010-08-12 16:38:19 +02:00
Daniel Veillard
d3d33c8281 Release of libvirt-0.8.3
* configure.ac docs/news.html.in libvirt.spec.in: updates
* po/*.po*: update and regenerated
2010-08-04 15:03:25 +02:00
Justin Clift
de7d4c6ae7 man pages: update authors and copyright notice for libvirtd and virsh
This patch removes the individual author names from the libvirtd and virsh
man pages, instead referring to the main AUTHORS file distributed with
libvirt.  This approach is needed, as we can't guarantee unicode support
across all versions of pod2man used with libvirt.

Additionally, this patch includes the libvirtd man page in the spec file
used with "make rpm".  Without this patch "make rpm" is broken.
2010-07-17 04:51:01 +10:00
Matthias Bolte
9af989fabc Add openauth example to demonstrate a custom auth callback 2010-07-13 13:50:27 +02:00
Daniel Veillard
6f8e223780 Release of libvirt-0.8.2
- configure.ac docs/news.html.in libvirt.spec.in: updated
- po/*/o* : updated or.po and regenerated
2010-07-05 17:29:25 +02:00
Jiri Denemark
1a5c465ee5 Fix libvirt-guests init script
Firstly, the init script has to touch its file under /var/lock/subsys
when started, otherwise the system would think it's not running and
won't stop it during shutdown.

Secondly, for some reason there is a policy to automatically enable
init scripts when they are installed, so let the specfile do this. We
also need to start the init script to ensure it will be stopped during
the first shutdown after installing the package.

Also $LISTFILE should be enclosed by quotes everywhere as suggested by
Eric.
2010-05-28 18:00:53 +02:00
Matthias Bolte
fa0bb9f6b1 Use printf instead of echo -e in libvirt.spec.in
make rpm created dummy tests containing '-e #!/bin/sh' for me.
2010-05-27 01:11:15 +02:00
Matthias Bolte
5ac0272370 Install, distribute and package domainsnapshot.rng 2010-05-27 01:11:15 +02:00
Stefan Berger
a34871d9a5 vepa+vsi: Introduce dependency on libnl
This patch introduces a dependency on libnl, which subsequent patches
will then use.

Changes from V1 to V2:
- added diffstats
- following changes in tree
2010-05-25 15:31:38 -04:00
Jiri Denemark
66823690e4 Init script for handling guests on shutdown/boot
Example output during shutdown:

Running guests on default URI: console, rhel6-1, rhel5-64
Running guests on lxc:/// URI: lxc-shell
Running guests on xen:/// URI: error: no hypervisor driver available for xen:///
error: failed to connect to the hypervisor
Running guests on vbox+tcp://orkuz/system URI: no running guests.
Suspending guests on default URI...
Suspending console: done
Suspending rhel6-1: done
Suspending rhel5-64: done
Suspending guests on lxc:/// URI...
Suspending lxc-shell: error: Failed to save domain 9cba8bfb-56f4-6589-2d12-8a58c886dd3b state
error: this function is not supported by the hypervisor: virDomainManagedSave

Note, the "Suspending $guest: " shows progress during the suspend phase
if domjobinfo gives meaningful output.

Example output during boot:

Resuming guests on default URI...
Resuming guest rhel6-1: done
Resuming guest rhel5-64: done
Resuming guest console: done
Resuming guests on lxc:/// URI...
Resuming guest lxc-shell: already active

Configuration used for generating the examples above:
URIS='default lxc:/// xen:/// vbox+tcp://orkuz/system'

The script uses /var/lib/libvirt/libvirt-guests files to note all active
guest it should try to resume on next boot. It's content looks like:

default 7f8b9d93-30e1-f0b9-47a7-cb408482654b 085b4c95-5da2-e8e1-712f-6ea6a4156af2 fb4d8360-5305-df3a-2da1-07d682891b8c
lxc:/// 9cba8bfb-56f4-6589-2d12-8a58c886dd3b
2010-05-21 09:33:30 +02:00
Stefan Berger
beccb0deca rpmbuild: add ebtables & ip(6)tables dependency for rpm
Add ebtables,iptables & iptables-ipv6 dependency to rpm.

Changes from V1 to V2:
  -passing --without-libpcap to configure script, if libpcap is not to be used
2010-05-05 12:20:28 -04:00
Daniel Veillard
7efa3937f0 Various fixes for the spec file
This includes various things:
 - fix the Requires: libvirt-client to use %{name} to allow easy
   renaming
 - when building ESX support one need libcurl-devel
 - remove Makefile[.in] from xml/nwfilter in the docs, as this breaks
   parallel install ation of i686 and x86_64 packages
 - don't include nwfilter config files if not building with the daemon
all relatively trivial which is why I packed them together
* libvirt.spec.in: fix various small bugs
2010-05-04 16:13:55 +02:00
Daniel Veillard
5d65d32f2c Release of libvirt-0.8.1
* configure.ac docs/news.html.in libvirt.spec.in: updates for release
* po/*.po*: updated localizations and regenerated
2010-04-30 18:55:08 +02:00
Daniel Veillard
4e041189f8 Move dnsmasq host file to a separate directory
use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is
unreadable by the dnsmasq binary

* src/network/bridge_driver.c: update DNSMASQ_STATE_DIR
* src/Makefile.am: create it on make install
* libvirt.spec.in: take the new directory into account
2010-04-28 15:53:09 +02:00
Daniel P. Berrange
f6770e8665 Run test suite as part of RPM build process
To ensure that patches in the RPM don't break any functionality
it is neccessary to run the test suites during build. It currently
has 3 tests disabled

 - daemon-conf: this is totally broken, since it relies on
   being able to resolve the 'libvirt' group & being able to
   resolve hostnames at daemon startup. This isn't possible
   in a mock build root
 - seclabeltest: fails to initialize selinux in the mock
   build root. Possibly fixable
 - nodeinfotest: broken on s390 + ppc - this is a real bug

* libvirt.spec.in: Add a %check section, with 3 tests
   temporarily disabled
2010-04-15 17:56:06 +01:00
Daniel Berteaud
505242f817 Fix spec file for builds without lxc
* libvirt.spec.in: fix a cut and paste error
2010-04-13 10:40:21 +02:00
Daniel Veillard
bfcca58787 Release of libvirt-0.8.0
* configure.ac docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
  updates for release of 0.8.0
* po/*.po po/libvirt.pot: updated a lar set of localizations, and merge
  the messages
2010-04-12 19:39:20 +02:00
Stefan Berger
3bf24abc8c nwfilter: Support for learning a VM's IP address
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple  IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.

So, when for example an interface description in the domain XML has
looked like this up to now:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'>
        <parameter name='IP' value='10.2.3.4'/>
      </filterref>
    </interface>

you may omit the IP parameter:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'/>
    </interface>

Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface  (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.

A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.

* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
  src/nwfilter/nwfilter_ebiptables_driver.[ch]
  src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
2010-04-07 23:12:21 +02:00
Stefan Berger
8cf0ed02be nwfilter: Add filter schema for nwfilter XML, extend domain XML schema
This patch adds a relaxng nwfilter schema along with a test that
verifies all the test output XML against the schema. The input XMLs
contain a lot of intentional out-of-range values that make them fail the
schema verification, so I am not verifying against those.
2010-04-06 11:09:46 -04:00
Eric Blake
a792bf240f build: more fallout from test -a
* cfg.mk (sc_prohibit_test_minus_ao): Also check for [.
* docs/Makefile.am (%.html, html/index.html): Avoid non-portable
test usage.
* libvirt.spec.in (%post): Likewise.
* tools/virt-pki-validate.in (servercert.pem): Likewise.
* configure.ac (LOGNAME): Use test, not [, in files processed by
autoconf.
Detected by Matthias Bolte.
2010-03-31 15:18:13 -06:00
Daniel Veillard
b4b0949dd7 Distribute nwfilter xml files and add them to rpm
* examples/xml/nwfilter/Makefile.am: add all xml to the distribution
* libvirt.spec.in: reference them from the rpm spec file to have them
  available in the main libvirt package
2010-03-31 10:20:22 +02:00
Daniel Veillard
e7d29e234c Fix logroate rpm build breakage
related to fix of bug https://bugzilla.redhat.com/show_bug.cgi?id=547514
2010-03-18 13:50:08 +01:00
Daniel Veillard
89bf843a6d Change logrotate to be per-hypervisor logs
Having a single logrotate configuration file for all hypervisors
did not work as logrotate would get confused if an hypervisor not
supported on that platform was still listed. Simplest is to split
the logrotate as separate per hypervisor files and change the
spec file to only install the ones compiled in.
* daemon/libvirtd.lxc.logrotate.in daemon/libvirtd.qemu.logrotate.in
  daemon/libvirtd.uml.logrotate.in: copy and split the original
  daemon/libvirtd.logrotate.in file
* daemon/Makefile.am: update to support the different files and
  cleanup in sed suggested by Eric Blake
* libvirt.spec.in: only install the relevant logrotate configs
* daemon/.gitignore: update logrotate generated list
2010-03-10 11:27:02 +01:00
Daniel Veillard
703c165188 Release of libvirt-0.7.7
* configure.ac libvirt.spec.in: update with new version
* docs/news.html.in: add list of changes in 0.7.7
* po/*po*: updated spanish and russian localisations, rebuilt
2010-03-05 17:10:21 +01:00
David Allan
b2111ba3cd Revert fs pool formatting
* We are reverting this patch pending a discussion of the right way to implement.
2010-02-26 03:33:27 -05:00
Dave Allan
b738016b78 Format FS pools on creation
Create the filesystem on the partition used by the pool
* configure.ac: check for mkfs availability
* libvirt.spec.in: add extra require on util-linux for mkfs
* src/storage/storage_backend_fs.c: run mkfs with the expected
  fs type when creating a filesystem pool
2010-02-24 09:51:34 +01:00
Daniel Veillard
31a5ee922a Release of libvirt-0.7.6
* configure.ac docs/news.html.in libvirt.spec.in: version bump and doc
  updates
* po/*.po*: updated and regenerated the localizations
2010-02-03 18:16:25 +01:00
Daniel Veillard
3f24ae2eb9 Release of libvirt-0.7.5 2009-12-23 17:00:22 +01:00
Jiri Denemark
79fa4a98d1 Move cpu_map.xml to -client RPM
All the cpu code is part of libvirt library and it might be used by
drivers which do not require libvirtd to be running.
2009-12-23 14:28:42 +01:00
Jiri Denemark
ab007c3da0 Add cpu_map.xml to libvirt.spec
* libvirt.spec.in: embbed it in the main libvirt binary rpm
2009-12-22 12:09:56 +01:00
Mark McLoughlin
3b3305d859 remove all traces of lokkit support
Long ago we tried to use Fedora's lokkit utility in order to register
our iptables rules so that 'service iptables restart' would
automatically load our rules.

There was one fatal flaw - if the user had configured iptables without
lokkit, then we would clobber that configuration by running lokkit.

We quickly disabled lokkit support, but never removed it. Let's do
that now.

The 'my virtual network stops working when I restart iptables' still
remains. For all the background on this saga, see:

  https://bugzilla.redhat.com/227011

* src/util/iptables.c: remove lokkit support

* configure.in: remove --enable-lokkit

* libvirt.spec.in: remove the dirs used only for saving rules for lokkit

* src/Makefile.am: ditto

* src/libvirt_private.syms, src/network/bridge_driver.c,
  src/util/iptables.h: remove references to iptablesSaveRules
2009-12-10 11:27:17 +00:00
Daniel P. Berrange
9428f2ced6 Introduce a simple API for handling JSON data
This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc).  There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.

This uses the YAJL library for parsing/formatting from

 http://lloyd.github.com/yajl/

* src/util/json.h, src/util/json.c: Data structures and APIs
  for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers
2009-12-07 14:14:36 +00:00
Daniel Veillard
040e80f7e6 Release of libvirt-0.7.4
0.7.3 was broken

* configure.in docs/news.html.in: release of 0.7.4
* configure.in libvirt.spec.in: require netcf >= 0.1.4
* src/Makefile.am: node_device/node_device_udev.h was missing from
  NODE_DEVICE_DRIVER_UDEV_SOURCES breaking compilation on platforms with
  udev
2009-11-20 19:43:59 +01:00
Daniel Veillard
b8d4b6bec9 Release of libvirt-0.7.3
* configure.in docs/news.html.in libvirt.spec.in: describe new release
* po/*.po*: regenerate
2009-11-20 17:31:13 +01:00
Daniel P. Berrange
4811fab790 Enable udev instead of hal on F12 / RHEL-6 or later
HAL has been deprecated since F12 and RHEL-6, so if building on
these platforms, switch on the udev driver instead

* libvirt.spec.in: Activate udev on F12/RHEL6
2009-11-20 16:45:46 +01:00
Daniel P. Berrange
3c3dffc285 Exclude numactl on s390[x]
The numactl package is not applicable for s390[x] arches, so do
not enable it as a build dep.

* libvirt.spec.in: Exclude numactl on s390[x]
2009-11-12 11:17:29 +00:00
Laine Stump
753c6c9c75 Support reporting live interface IP/netmask
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than  reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.

* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
  update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
  adds the inactive flag for interface dump
2009-11-03 21:04:56 +01:00
Mark McLoughlin
1acef95a81 libvirt-devel should only require libvirt-client
There's a long known issue where if you install libvirt in a guest,
the default virtual network will conflict with the default virtual
network in the host.

That's one of the reasons we have the libvirt-client RPM - it allows
you to install the client library without having the host side
installed.

Rich Jones points out that if you install libvirt-devel in a guest,
then you get libvirtd installed and the network conflict:

  https://bugzilla.redhat.com/531200

libvirt-devel should only require libvirt-client - e.g. nothing in
the devel package pertains to anything in the libvirt RPM. The Fedora
packaging guidelines say:

  https://fedoraproject.org/wiki/Packaging/Guidelines#Devel_Packages

  Devel packages must require the base package using a fully versioned
  dependency ...

But for all intents and purposes, libvirt-client is our base RPM.

* libvirt.spec.in: make libvirt-devel require libvirt-client
2009-10-28 17:23:34 +00:00
Daniel Veillard
7c39e4f885 Fix a missing % on endif in spec file
* libvirt.spec.in: missing % broke 'make rpm'
2009-10-13 16:18:45 +02:00
Amy Griffis
e1a2fe6af2 LXC add augeas support for config file
* src/lxc/libvirtd_lxc.aug src/lxc/test_libvirtd_lxc.aug: augeas schemas
  for lxc.conf
* src/Makefile.am libvirt.spec.in: glue the new augeas files in
2009-10-08 18:06:40 +02:00
Amy Griffis
2dd44664cf LXC add driver config file lxc.conf
* src/lxc/lxc.conf: new configuration file, there is currently one
  tunable "log_with_libvirtd" that controls whether an lxc controller will
  log only to the container log file, or whether it will honor libvirtd's
  log output configuration. This provides a way to have libvirtd and its
  children log to a single file.  The default is to log to the container
  log file.
* src/Makefile.am libvirt.spec.in: add the new file
* src/lxc/lxc_conf.[ch] src/lxc/lxc_driver.c: read the new log value
  from the configuration file and pass the log informations when
  starting up a container.
2009-10-08 17:40:14 +02:00
Mark McLoughlin
d285084b12 Create /var/log/libvirt/{lxc,uml} dirs
Otherwise logrotate barfs:

  error: error accessing /var/log/libvirt/uml: No such file or directory
  error: libvirtd:1 glob failed for /var/log/libvirt/uml/*.log
  error: found error in /var/log/libvirt/qemu/*.log /var/log/libvirt/uml/*.log /var/log/libvirt/lxc/*.log , skipping

* qemud/Makefile.am: always create /var/log/libvirt/{lxc,uml} when
  installing the logrotate conf; not ideal, but easier than making
  the logrotate conf depend on which drivers are enabled
2009-10-06 13:49:35 +01:00
Daniel Veillard
553f31c579 Fix a few 'make rpm' breakages
* Makefile.am: examples/domain-events/events-python should be added
  to dist tarball
* libvirt.spec.in: there is no makefile in domain-events but in
  domain-events/events-c and python/libvirtclass.txt has vanished
2009-09-30 16:20:25 +02:00
Chris Lalancette
47c8709564 Fix up a few typos in the tree.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-30 14:05:24 +02:00
Daniel P. Berrange
323ad539bb Don't require full daemon install for libvirt python bindings
* libvirt.spec.in: libvirt-python only needs to depend on
  libvirt-clients
2009-09-28 14:14:43 +01:00
Daniel P. Berrange
cf5fa06c8d Tweak specfile to fix RHEL6 rules & ESX/PHYP enablement
* libvirt.spec.in: ESX/PHYP drivers do not require libvirtd.
  RHEL-6 should include LXC on all arches
2009-09-21 15:24:08 +01:00
Daniel P. Berrange
13f59ad733 Move example XML files into examples/xml
* docs/storage/: Move to examples/xml/storage/
* docs/test*.xml: Move to examples/xml/test/
* docs/Makefile.am: Remove example XML files from dist
* Makefile.am: Add examples/xml to EXTRA_DIST
* tests/virshtest.c: Update for moved test XML
* libvirt.spec.in: Include example XML files as docs
* tests/int-overflow: UPdate for moved XML
2009-09-21 14:41:48 +01:00
Daniel P. Berrange
3decd4f9f1 Make pki_check.sh into an installed & supported tool
* docs/pki_check.sh: Move to tool/virt-pki-validate.in and add
  in POD man page documentation
* tools/.gitignore: Ignore generated virt-pki-validate file
* tools/Makefile.am: Install & build virt-pki-validate and
  virt-pki-validate.1
* docs/remote.html, docs/remote.html.in: Refer to new tool
  name virt-pki-validate
* libvirt.spec.in, mingw32-libvirt.spec.in: Add virt-pki-validate
  and virt-pki-validate.1 to files list
2009-09-21 14:41:46 +01:00
Daniel P. Berrange
cebeba7bd7 Move docs/examples into examples/
* Makefile.am: Add examples/dominfo examples/domsuspend examples/python
  as SUBDIRS
* configure.in: Update AC_OUTPUT for new/old Makefiles
* docs/Makefile.am: Remove examples from SUBDIRS
* docs/examples/info1.c: Move to examples/dominfo/info1.c
* docs/examples/suspend.c: Move to examples/domsuspend/suspend.c
* docs/examples: Remove all remaining files
* docs/examples/python: Moved to examples/python/
* examples/dominfo/Makefile.am, examples/domsuspend/Makefile.am: New
  build files
* libvirt.spec.in: Update to take account of moved examples
2009-09-21 14:41:46 +01:00
Daniel P. Berrange
fd5c9bb9ab Refactor libvirt.spec to allow client-only builds
Some architectures in certain RHEL versions do not include any
hypervisors. Update the specfile to allow those to easily build
a remote client only version of libvirt. ie no libvirtd related
bits at all.

* qemud/Makefile.am: Always instal SASL config since its needed
  by client too
* libvirt.spec.in: Re-factor specfile conditionals to allow entire
  server side build to be disabled easily, eg a remote client only
  build. Make RHEL-5 do client only build for s390/ppc. Make RHEL-6
  do a client only build for all non-x86_64 archs. Enable LXC on
  RHEL-6. Enable all Fedora >= 6 features on RHEL-6 too. Add some
  more conditionals around dnsmasq/iptables/hal Requires tags.
  Add missing e2fsprogs-devel BR for RHEL-5 as workaround for broken
  parted. Fix the device mapper BR for RHEL-5. Add conditional rules
  for ESX build. Add conditional rules for SELinux + HAL builds.
  Fix a mistaken %{with_qemu} to be %{with_network} when setting
  up default network XML
2009-09-21 14:41:42 +01:00
Daniel Veillard
c4f6e80671 Release of libvirt 0.7.1
* configure.in docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
  updates to new release
* NEWS docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html
  docs/libvirt-api.xml docs/libvirt-refs.xml docs/news.html
  include/libvirt/libvirt.h: regenerated
2009-09-15 14:24:51 +02:00
Daniel P. Berrange
fb01a107c5 Restart libvirtd upon RPM upgrade
* libvirt.spec.in: Restart libvirtd in %post
2009-09-14 13:42:18 +01:00
Charles Duffy
8d4ed2ad3d Reintroduce support for lzop compression
lzop was removed due to some confusion over whether it provided functional
advantages distinct from xz. This has been addressed in the mailing list post
archived at http://permalink.gmane.org/gmane.comp.emulators.libvirt/16487, and
support for lzop is re-added here.

* libvirt.spec.in: add dependancy on lzop
* src/qemu.conf: update documentation of save_image_format
* src/qemu_driver.c: re-add lzop compression option
2009-09-10 11:13:33 +02:00
Daniel Veillard
c5a305584f Deprecate lzma and lzop in favor of xz, add dep
* src/qemu_driver.c: drop lzma and lzop images compression options
  as they are deprecated by xz
* libvirt.spec.in: add requires for xz/bzip2/gzip as they are needed
  to implement the compression options
2009-09-09 16:44:44 +02:00
Daniel Veillard
f54de34ba4 Add flags and requires for Multipath storage
* libvirt.spec.in: the new multipath module requires device-mapper
  and device-mapper-devel for build
2009-09-08 16:07:54 +02:00
Daniel Veillard
91c7bf659b PHYP driver cleanups
* libvirt.spec.in: activate phyp and fix the BuildDep to libssh2-devel
* src/phyp/phyp_driver.c: fix a debug macro to use the normal logging API
2009-09-04 14:03:45 +02:00
Daniel P. Berrange
182a80b922 Move QEMU monitor socket in /var/lib/libvirt/qemu
Separate the guest created QEMU monitor socket location
from the libvirtd create XML / PID data files, to improve
security separation when running QEMU non-root

* libvirt.spec.in: Leave /var/run/libvirt/qemu as root:root
* src/qemu_conf.h: Add libDir and cacheDir directory paths
* src/qemu_driver.c: Move QEMU monitor socket from
  stateDir to libDir to avoid making security critical directory
  accessible to QEMU guests.
* src/util.c: Delay running hook till after damonizing to
  ensure pidfile is still written before changing UID/GID
2009-09-03 18:10:16 +01:00
Daniel P. Berrange
6a035507fd Only add glusterfs dep for Fedora >= 11
* libvirt.spec.in: Conditionalize glusterfs requires line for
  Fedora >= 11, since other distros don't have it available
2009-09-01 21:19:38 +01:00
Miloslav Trmač
05b9b8fda3 Add volume encryption information handling.
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).

Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.

Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.

This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.

* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
  Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
  Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
  helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
  RNG schema
2009-09-01 18:27:28 +01:00
Miloslav Trmač
6acc17af8c Secret manipulation public API
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.

* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
  schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
  describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
  API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
  files list
2009-09-01 17:38:52 +01:00
Daniel P. Berrange
8e06c8b3da Support new PolicyKit 1.0 API
* configure.in: Check for pkcheck which indicates new policykit
* qemud/Makefile.am: Install different versions of policy
* qemud/libvirtd.policy: Rename to libvirtd.policy-0
* qemud/libvirtd.policy-1: new style policy
* qemud/qemud.c, qemud/qemud.h, qemud/remote.c: Support new
  policykit API via external pkcheck helper
* src/remote_internal.c: Don't prompt for polkit auth with new
  policykit API
* libvirt.spec.in: deal with new policy install locations & deps
2009-08-25 11:59:14 +01:00
Mark McLoughlin
ce1783ccc1 spec file: add URL to Source tag
See https://fedoraproject.org/wiki/Packaging:SourceURL
2009-08-21 11:10:37 +01:00
Mark McLoughlin
f9bfa10797 Set perms on /var/lib/libvirt/boot to 0711
Allow qemu user to open kernel/initrds in this dir, but still prevent
others from listing it.

* libvirt.spec.in: set /var/lib/libvirt/boot perms to 0711
2009-08-10 09:00:02 +01:00
Daniel Veillard
22a5ebe44b Release of libvirt-0.7.0
* configure.in NEWS docs/* libvirt.spec.in include/libvirt/libvirt.h:
  Release of 0.7.0
* po/*.po*: updated and regenerated the localization pool
2009-08-05 16:00:41 +02:00
Mark McLoughlin
f4e7157716 Set perms on /var/lib/libvirt/images to 0711
Allow qemu user to open images in this dir, but still prevent others
from listing it.

* libvirt.spec.in: set /var/lib/libvirt/images perms to 0711
2009-07-31 09:52:24 +01:00
Daniel P. Berrange
eb78ccf391 Fix RPM upgrades from F11 to F12
* libvirt.spec.in: Create qemu/kvm user/group in %pre script
2009-07-30 12:26:58 +01:00
Mark McLoughlin
a8e34e298e Fix polkit/netcf disabling on older fedoras
polkit was disabled by default for a reason - because we selectively
enable it on newer fedoras rather than disable it on older fedoras

Same fix needed for netcf
2009-07-29 10:05:39 +01:00
Mark McLoughlin
181c80d6eb Capilize libvirt-client summary
Fixes:

  W: summary-not-capitalized client side library and utilities of the libvirt library
2009-07-29 09:57:24 +01:00
Mark McLoughlin
56d672afeb Move ldconfig calls to libvirt-client %post/%postun
Now that the library has moved to libvirt-client
2009-07-29 09:55:43 +01:00
Mark McLoughlin
adefc3955b No need to build require both python-devel and python
Since python-devel requires python

Pointed out by Itamar Reis Peixoto
2009-07-29 08:59:44 +01:00
Mark McLoughlin
09a40ab471 Remove executable perms from /etc/sysconfig/libvirtd
Changed by Rich Jones for:

  libvirt.x86_64: E: executable-marked-as-config-file /etc/sysconfig/libvirtd

See:

  https://bugzilla.redhat.com/226055
2009-07-29 08:45:25 +01:00
Mark McLoughlin
70a339970c Use a %postun -p for one line scriptlet
Changed by Rich Jones, presumably for this:

  libvirt.x86_64: W: one-line-command-in-%postun /sbin/ldconfig

see:

  https://bugzilla.redhat.com/226055
2009-07-29 08:45:25 +01:00
Mark McLoughlin
f69b841d2b Don't explicitly require libxml2
Originally done by rjones as part of this package review:

  https://bugzilla.redhat.com/226055
2009-07-29 08:45:24 +01:00
Mark McLoughlin
4f377369a8 Fix some unowned directories
danpb's fix for:

  https://bugzilla.redhat.com/483442
2009-07-28 19:29:59 +01:00
Mark McLoughlin
86823575fd Kill qemu BuildRequires
It's not needed at build time

Removed in Fedora by:

  * Fri Jun  5 2009 Mark McLoughlin <markmc@redhat.com> - 0.6.4-2.fc12
  - Remove the qemu BuildRequires
2009-07-28 19:29:59 +01:00
Mark McLoughlin
69a0f3ee23 Enable netcf by default
Disabled on < f12 for now until netcf is in Fedora updates

BuildRequires netcf if enabled, pass --without-netcf if its disabled

* libvirt.spec.in: enabled netcf by default
2009-07-28 19:29:59 +01:00
Mark McLoughlin
6a9948c018 Default to with_polkit
Unless there's some reason we shouldn't
2009-07-28 19:29:59 +01:00
Mark McLoughlin
e3f0cae719 Make vbox support configurable
Added by DV with:

  * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1.fc12
  - release of 0.6.3
  - VirtualBox driver
2009-07-28 19:29:59 +01:00
Mark McLoughlin
7311161340 Build with --without-capng if capng is disabled
* libvirt.spec: pass --without-capng if appropriate
2009-07-28 19:29:59 +01:00
Mark McLoughlin
b55501c00c BuildRequires libcap-ng-devel not capng-devel
Fedora CVS changelog is "Fix libcap-ng-devel require, Daniel"
2009-07-28 19:29:59 +01:00
Mark McLoughlin
232514041d Reduce glusterfs dependency to 2.0.1
* libvirt.spec.in: require glusterfs-client >= 2.0.1
2009-07-28 11:01:58 +01:00
Daniel P. Berrange
484640eaf6 Fix misc build problems due to new drivers
* autobuild.sh: Disable esx/phyp build on mingw32
* configure.in: Fix handling of --without-phyp so it actually works
* libvirt.spec.in: Add missing interface.rng
* mingw32-libvirt.spec.in: Disable phyp/esx drivers
* src/phyp/phyp_driver.c: Fix missing i18n of error messages
2009-07-24 17:20:50 +01:00
Daniel Veillard
a2e2717411 Desactivate phyp build and indicate libssh builreq 2009-07-24 16:26:54 +02:00
Daniel Veillard
7641c3c782 rpm spec cleanup and split off client only package
* libvirt.spec.in: make a client rpm with shared libs, client binaries
  and resources needed by those, and a small number of fixes and
  cleanups in the spec file.
2009-07-21 11:16:15 +02:00
Daniel P. Berrange
0714b2ba4c Run QEMU guests as an unprivileged user
* configure.in: Add --with-qemu-user and --with-qemu-group args
* libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
* qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
  src/qemu.conf: Add 'user' and 'group' args for configuration
* src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
* src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
* src/qemu_driver.c: Change user ID/group ID when launching QEMU
  guests. Change user/group ownership on disks/usb/pci devs.
  Put memory dumps in %localstatedir/cache/libvirt/qemu
* src/util.c, src/util.h: Add convenient APIs for converting
  username/groupname to user ID / group ID
2009-07-16 17:06:55 +01:00
Daniel Veillard
d3c236f91c Fix configure flags in spec file
* libvirt.spec.in: we were still using deprecated configure switches
2009-07-16 17:28:41 +02:00
Harshavardhana
2562303a45 Add new net filesystem glusterfs
* src/storage_conf.c src/storage_conf.h: adds glusterfs to the list
  of network storage
* libvirt.spec.in: adds the dependency on glusterfs-client
2009-07-08 11:46:25 +02:00
Daniel Veillard
c759ae5509 Release of libvirt-0.6.5
* configure.in libvirt.spec.in NEWS docs/* po/*: release of
  libvirt-0.6.5
* .gitignore: adding cscope files
Daniel
2009-07-03 14:32:17 +00:00
Daniel P. Berrange
1a982aef18 Prepare for using libcap-ng 2009-06-29 11:33:13 +00:00
Daniel Veillard
b547201561 Finish the integration of OpenNebula driver
* configure.in libvirt.spec.in src/Makefile.am
  src/opennebula/one_client.[ch] src/opennebula/one_conf.h
  src/opennebula/one_driver.[ch] : Finish the integration of OpenNebula,
  avoid dependancy on OpenNebula libraries, require xmlrpc-c-devel
  and build it by default, based on patch by Javier Fontan and DanB
  suggestions
Daniel
2009-06-24 17:32:56 +00:00
Daniel Veillard
66220e3e61 release of libvirt-0.6.4
* configure.in libvirt.spec.in NEWS docs/* po/*: release of
  libvirt-0.6.4
* src/libvirt.c src/virterror.c: some comments cleanups
Daniel
2009-05-29 16:51:15 +00:00
Daniel Veillard
81748c62c7 * libvirt.spec.in: add a couple of missing directories
Daniel
2009-05-06 13:27:54 +00:00
Daniel Veillard
9cae1d5ed6 release of 0.6.3
* NEWS configure.in libvirt.spec.in docs/*: release of 0.6.3
* po/*: regenerated
* src/libvirt.c src/virterror.c: fixed some function comments
Daniel
2009-04-24 14:04:54 +00:00
Daniel P. Berrange
fa4126087b Add tool for validating XML & fix misc bugs in virsh POD docs 2009-04-19 15:10:45 +00:00
Daniel Veillard
4fb341d741 * libvirt.spec.in: fix build on RHEL and Centos 5.x
daniel
2009-04-14 12:47:34 +00:00
Daniel Veillard
8536e697b6 release of 0.6.2
* configure.in libvirt.spec.in NEWS docs/*: release of 0.6.2
* po/*: Gujarati and Polish updates, rebuild
* AUTHORS: add one missing
Daniel
2009-04-03 15:25:38 +00:00
Daniel Veillard
c61180dcd7 * libvirt.spec.in: better modularization of the spec file,
patch by Ryota Ozaki
daniel
2009-03-31 12:45:07 +00:00
Daniel Veillard
e43d1ae0c6 * NEWS configure.in libvirt.spec.in doc/* include/libvirt/libvirt.h:
release of 0.6.1
* po/*: rebuilt
* AUTHORS: updated to list new contributors
Daniel
2009-03-04 13:17:44 +00:00
Daniel P. Berrange
2c22a68ce2 Added complete set of RNG schemas for all XML formats 2009-01-27 15:29:53 +00:00
Mark McLoughlin
20921cc284 If you un-install libvirt and re-install it, you get a warning
from the post-install script:

  Installing     : libvirt
  ln: creating symbolic link `/etc/libvirt/qemu/networks/autostart/default.xml': File exists

See https://bugzilla.redhat.com/462011
2009-01-21 10:50:03 +00:00
Daniel P. Berrange
23a090ab92 Allow virtual networks to survive daemon restart 2009-01-20 22:36:10 +00:00
Daniel Veillard
0fc5b2fbc9 Activate RHEL5 specific flags when needed
* libvirt.spec.in: try to autodetect when rhel5 option should be
  passed to configure
Daniel
2009-01-20 17:27:34 +00:00
Daniel Veillard
5257bac05a * libvirt.spec.in: fix a conditional bug in spec file #460510,
patch by Dave Allan
daniel
2008-12-12 07:36:20 +00:00
Cole Robinson
bae8899a46 Fix rpm build by installing logrotate config. 2008-12-11 15:02:39 +00:00
Daniel P. Berrange
c23ff311fc Fix libnuma use to build with v1 compatability code 2008-11-28 11:20:27 +00:00
Daniel Veillard
60c8b285a6 * libvirt.spec.in: cleanups and missing dep for hal
Daniel
2008-11-26 14:46:49 +00:00
Daniel Veillard
517ff04bec Release of 0.5.0
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
  generation time
daniel
2008-11-25 15:48:11 +00:00
Daniel P. Berrange
d7605585cd Allow UML build to be disabled in RPM 2008-11-21 10:09:08 +00:00
Daniel Veillard
773441bba7 * libvirt.spec.in: fix bug #465274 to build on RHEL
daniel
2008-10-02 15:04:11 +00:00
Daniel Veillard
321c9a7f51 * configure.in libvirt.spec.in NEWS docs/*: release of libvirt-0.4.6
* src/storage_backend_logical.c: re-add the -f flag to vgremove
* po/*: rebuilt
Daniel
2008-09-23 20:48:49 +00:00
Daniel P. Berrange
da622a20cd Fix broken specfile build 2008-09-18 10:20:24 +00:00