Commit Graph

503 Commits

Author SHA1 Message Date
Marc-André Lureau
13248e1688 qemu: add vhost-user helpers
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.

qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-09-24 13:19:08 -04:00
Daniel P. Berrangé
2c52ecd960 util: purge all code for testing OOM handling
The OOM handling requires special build time options which we never
enable in our CI. Even once enabled the tests are incredibly slow and
typically require manual inspection of the results to weed out false
positives.

Since there was previous agreement to switch to abort on OOM in libvirt
code, there's no point continuing to keep the unused OOM testing code.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-13 10:05:17 +01:00
Shivaprasad G Bhat
944a35d7f0 tests: Add test case for QEMU pci-hostdev hotplug
This patch adds hostdev test cases in qemuhotplugtest.c.

Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-09 16:44:24 +02:00
Roman Bolshakov
f6d6086dbf tests: Make references to global symbols indirect in test drivers
A library has to be built with -flat_namespace to get all references to
global symbols indirected. That can also be achieved with two-level
namespace interposition but we're not using explicit symbol
interposition since it's more verbose and requires massive changes to
the mocks.

This provides a way to interpose a mock for virQEMUCapsProbeHostCPU from
qemucpumock and fixes domaincapstest on macOS.

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-23 11:26:26 +01:00
Roman Bolshakov
647c65186a tests: Remove -module flag for mocks
macOS has two kinds of loadable libraries: MH_BUNDLE, and MH_DYLIB.
bundle is used for plugins that are loaded with dlopen/dlsym/dlclose.
And there's no way to preload a bundle into an application. dynamic
linker (dyld) will reject it when finds it in DYLD_INSERT_LIBRARIES.

Unfortunately, a bundle is built if -module flag is provided to libtool.
The flag has been removed to build dylibs with ".dylib" suffix.

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-23 11:26:26 +01:00
Roman Bolshakov
fde361083d tests: Add lib- prefix to all mocks
In preparation libtool "-module" flag removal, add lib prefix to all
mock shared objects.

While at it, introduce VIR_TEST_MOCK macros that makes path out of mock
name to be used with VIR_TEST_PRELOAD or VIR_TEST_MAIN_PRELOAD.  That,
hopefully, improves readability, reduces line length and allows to
tailor VIR_TEST_MOCK for specific platform if it has shared library
suffix different from ".so".

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-23 11:26:26 +01:00
Jiri Denemark
8a62a1592a Revert "configure: Remove --enable-test-coverage"
This reverts commit f38d553e2d.

Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
2019-08-14 09:28:06 +02:00
Daniel Henrique Barboza
92832577d1 qemuxml2xmltest: Redirect access to FW descriptor dirs
If /etc/qemu/firmware directory exists, but is not readable then
qemuxml2xmltest fails. This is because once domain XML is parsed
it is validated. For that domain capabilities are needed.
However, when constructing domain capabilities, FW descriptors
are loaded and this is the point where the test fails, because it
fails to open one of the directories.

Fixes: 5b9819eedc domain capabilities: Expose firmware auto selection feature
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-13 09:48:39 +02:00
Eric Blake
43686f362c backup: Add virsh-checkpoints test
Similar to virsh-snapshots. Provides decent coverage of the checkpoint
API, the test driver implementation, and the virsh access to the API.
A later patch will worry about testing that snapshots and checkpoints
are mutually exclusive (in part so it is easier to revert that when we
finally implement the interaction and lift that restriction).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00
Eric Blake
1a4df34a0f backup: Parse and output checkpoint XML
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.

Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag.  We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch).  But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema.  If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.

Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.

Signed-off-by: Eric Blake <eblake@redhat.com>
2019-07-26 16:48:58 -05:00
Eric Blake
d85842cfd7 backup: Document new XML for checkpoints
Prepare for new checkpoint APIs by describing the XML that will
represent a checkpoint.  The checkpoint XML is modeled heavily after
virDomainSnapshotPtr. See the docs for more details.

Add testsuite coverage for some minimal uses of the XML (bare minimum,
the sample from html, and a full dumpxml, and some counter-examples
that should fail schema validation). Although use of the REDEFINE flag
will require the <domain> subelement to be present, it is easier for
most of the tests to provide counterpart output produced with the
NO_DOMAIN flag (particularly since synthesizing a valid <domain>
during testing is not trivial).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00
Cole Robinson
fb9f6ce625 network: wire up dnsmasq option xmlns
This maps to XML like:

  <network xmlns:dnsmasq='http://libvirt.org/schemas/network/dnsmasq/1.0'>
    ...
    <dnsmasq:options>
      <dnsmasq:option value="foo=bar"/>
      <dnsmasq:option value="cname=*.foo.example.com,master.example.com"/>
    </dnsmasq:options>
  </network>

To dnsmasq config options

  ...
  foo=bar
  cname=*.foo.example.com,master.example.com

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-07-17 17:18:56 -04:00
Michal Privoznik
cc34260f5a test: Introduce virnetdevopenvswitchtest
Test if our parsing of interface stats as returned by ovs-vsctl
works as expected. To achieve this without having to mock
virCommand* I'm separating parsing of stats into a separate
function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-16 13:42:39 +02:00
Peter Krempa
d0924f8c80 tests: Drop sexpr2xmltest
Now that we no longer support sexpr conversion to the internal config we
can drop the test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-09 10:27:19 +02:00
Peter Krempa
b8551d449c tests: Remove xml2sexprtest
The test was the only place calling 'xenFormatSxpr'. Drop it as there
are no other users of that code since we've dropped xend support in
commit 1dac5fbbbb.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-09 10:27:19 +02:00
Eric Blake
4d91ad1c59 snapshot: Rename qemu domain snapshot test files
Make it obvious that the domainsnapshotxml2xml test is only run when
compiling in support for qemu.

Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-07-08 16:10:22 -05:00
Peter Krempa
7b604379ba tests: Drop qemuargv2xmltest
Now that we no longer use that functionality we can also drop the tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-06-20 12:15:05 +02:00
Daniel P. Berrangé
4b4a981d60 conf: introduce virNetworkPortDefPtr struct and XML support
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-17 15:19:54 +01:00
Andrea Bolognani
73cfc36211 tests: Include LDADDS in qemu_LDADDS
At this point, all test programs that use qemu_LDADDS also
use LDADDS, so we can remove a bunch of repetition by simply
including the latter in the former.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-06-12 20:31:23 +02:00
Andrea Bolognani
6b8048b48d tests: Tweak vircapstest_LDADD
We optionally include QEMU and LXC support in this test and
depending on which is enabled (if either is enabled at all) we
need to link in different objects.

Right now we implicitly depend on the fact that qemu_LDADDS is
empty when QEMU is not enabled to get the correct set of objects,
but it's better to be explicit about it.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-06-12 20:31:18 +02:00
Andrea Bolognani
74d8909f76 tests: Tweak cputest_LDADDS
We want all test programs using qemu_LDADDS to also use LDADDS,
and cputest is the only existing exception.

We can't just replace GNULIB_LIBS with LDADDS though, even though
the latter is a superset of the former, because that would result
in a linking error due to including the same object twice:

  /usr/bin/ld:
  ../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
  multiple definition of `libvirt_object_new_semaphore';
  ../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
  first defined here

To work around this, we include both qemu_LDADDS and LDADDS when
QEMU support is enabled, and just LDADDS otherwise.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-06-12 20:30:46 +02:00
Jiri Denemark
02c1d3a6e1 qemuargv2xmltest: Use mocked virQEMUCapsProbeHostCPU
The qemuTestParseCapabilitiesArch call would eventually lead to the host
CPU being probed via virCPUGetHost. Let's divert this to a mocked
version already used by the qemuxml2argvtest.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2019-06-03 18:07:16 +02:00
Jim Fehlig
76b420d003 build: fix linking libqemutestdriver with LTO enabled
openSUSE Factory is in the process of enabling Link Time Optimization [0]
and stumbled upon missing symbols when linking libqemutestdriver

libtool: link: gcc -shared  -fPIC -DPIC  ../src/libvirt_qemu_probes.o  \
-Wl,--whole-archive ../src/.libs/libvirt_driver_qemu_impl.a \
../src/.libs/libvirt_driver_network_impl.a \
../src/.libs/libvirt_driver_storage_impl.a -Wl,--no-whole-archive  \
-lcap-ng -lgnutls -lnl-route-3 -lnl-3 -ldbus-1 -lselinux -lapparmor \
/usr/lib/libxml2.so -ldl -lz -llzma -lm -lblkid -ltirpc  \
-fstack-protector-strong -O2 -fstack-protector-strong -flto=16 -g -O2 \
-fstack-protector-strong -flto=16 -g \
-Wl,-soname -Wl,libqemutestdriver.so -o .libs/libqemutestdriver.so
...
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `mdir_name'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `rpl_ioctl'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `rpl_pipe2'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `recvfd'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `c_strcasecmp'

The missing symbols are provided by GNUlib. Add it when linking
libqemutestdriver.

[0] https://en.opensuse.org/openSUSE:LTO

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-05-30 09:09:10 -06:00
Michal Privoznik
5b9819eedc domain capabilities: Expose firmware auto selection feature
If a management application wants to use firmware auto selection
feature it can't currently know if the libvirtd it's talking to
support is or not. Moreover, it doesn't know which values that
are accepted for the @firmware attribute of <os/> when parsing
will allow successful start of the domain later, i.e. if the mgmt
application wants to use 'bios' whether there exists a FW
descriptor in the system that describes bios.

This commit then adds 'firmware' enum to <os/> element in
<domainCapabilities/> XML like this:

  <enum name='firmware'>
    <value>bios</value>
    <value>efi</value>
  </enum>

We can see both 'bios' and 'efi' listed which means that there
are descriptors for both found in the system (matched with the
machine type and architecture reported in the domain capabilities
earlier and not shown here).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2019-04-10 13:58:51 +02:00
Daniel P. Berrangé
21c03d4fe6 tests: fix typo in mock filename added to EXTRA_DIST
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-03 12:01:56 +01:00
Daniel P. Berrangé
ff376c6283 tests: fix mocking of stat() / lstat() functions
Quite a few of the tests have a need to mock the stat() / lstat()
functions and they are taking somewhat different & inconsistent
approaches none of which are actually fully correct. This is shown
by fact that 'make check' fails on 32-bit hosts. Investigation
revealed that the code was calling into the native C library impl,
not getting intercepted by our mocks.

The POSIX stat() function might resolve to any number of different
symbols in the C library.

The may be an additional stat64() function exposed by the headers
too.

On 64-bit hosts the stat & stat64 functions are identical, always
refering to the 64-bit ABI.

On 32-bit hosts they refer to the 32-bit & 64-bit ABIs respectively.

Libvirt uses _FILE_OFFSET_BITS=64 on 32-bit hosts, which causes the
C library to transparently rewrite stat() calls to be stat64() calls.
Libvirt will never see the 32-bit ABI from the traditional stat()
call. We cannot assume this rewriting is done using a macro. It might
be, but on GLibC it is done with a magic __asm__ statement to apply
the rewrite at link time instead of at preprocessing.

In GLibC there may be two additional functions exposed by the headers,
__xstat() and __xstat64(). When these exist, stat() and stat64() are
transparently rewritten to call __xstat() and __xstat64() respectively.
The former symbols will not actally exist in the library at all, only
the header. The leading "__" indicates the symbols are a private impl
detail of the C library that applications should not care about.
Unfortunately, because we are trying to mock replace the C library,
we need to know about this internal impl detail.

With all this in mind the list of functions we have to mock will depend
on several factors

 - If _FILE_OFFSET_BITS is set, then we are on a 32-bit host, and we
   only need to mock stat64 and __xstat64. The other stat / __xstat
   functions exist, but we'll never call them so they can be ignored
   for mocking.

 - If _FILE_OFFSET_BITS is not set, then we are on a 64-bit host and
   we should mock stat, stat64, __xstat & __xstat64. Either may be
   called by app code.

 - If __xstat & __xstat64 exist, then stat & stat64 will not exist
   as symbols in the library, so the latter should not be mocked.

The same all applies to lstat()

These rules are complex enough that we don't want to duplicate them
across every mock file, so this centralizes all the logic in a helper
file virmockstathelper.c that should be #included when needed. The
code merely need to provide a filename rewriting callback called
virMockStatRedirect(). Optionally VIR_MOCK_STAT_HOOK can be defined
as a macro if further processing is needed inline.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-03 11:31:38 +01:00
Eric Blake
280a2b41e6 snapshot: Add tests of virsh -c test:///default snapshot*
Had this been in place earlier, I would have avoided the bugs in
commit 0baf6945 and 55c2ab3e. Writing the test required me to extend
the power of virsh - creating enough snapshots to cause fanout
requires enough input in a single session that adding comments and
markers makes it easier to check that output is correct. It's still a
bit odd that with test:///default, reverting to a snapshot changes the
domain from running to paused (possibly a bug in how the test driver
copied from the qemu driver) - but the important part is that the test
is reproducible, and any future tweaks we make to snapshot code have
less chance of breaking successful command sequences.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-25 09:24:53 -05:00
Cole Robinson
f38d553e2d configure: Remove --enable-test-coverage
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.

This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html

Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-14 20:47:15 -04:00
Andrea Bolognani
ca1471622d Don't define abs_* variables ourselves
Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:32 +01:00
Andrea Bolognani
349d49637c tests: Don't redefine variables for TESTS_ENVIRONMENT
We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:30 +01:00
Andrea Bolognani
c0a4a98eab Fix names for abs_top_{src,build}dir variables
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.

[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:28 +01:00
Andrea Bolognani
625c78b5c1 tests: Don't define TEST_DRIVER_DIR
It's no longer used anywhere.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:23 +01:00
Andrea Bolognani
b635eb8575 tests: Drop LIBVIRT_DRIVER_DIR from TESTS_ENVIRONMENT
LIBVIRT_DRIVER_DIR is defined as (what is for all intents and
purposes equivalent to) "$(abs_top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search that
directory automatically, which means passing it through the
environment is no longer necessary.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:19 +01:00
Andrea Bolognani
d24bb02b8c tests: Drop CONFIG_HEADER from TESTS_ENVIRONMENT
It's no longer used as of commit a9694a8e18.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:13 +01:00
Andrea Bolognani
6000bd1342 tests: Add testutilsqemu dependency for qemucaps2xmltest
We're not using any of the functionality offered by the
module at the moment, but we will in just a second.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-03-13 11:07:07 +01:00
Michal Privoznik
68ade25372 qemu: Enable firmware autoselection
https://bugzilla.redhat.com/show_bug.cgi?id=1564270

Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.

At the same time, introduce bunch of tests to test the feature.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 16:09:55 +01:00
Michal Privoznik
31eb3093c0 qemufirmwaretest: Test qemuFirmwareFetchConfigs()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 15:29:44 +01:00
Michal Privoznik
04406d87d2 test: Introduce qemufirmwaretest
Test firmware description parsing so far.

The test files come from three locations:
1) ovmf-sb-keys.json and ovmf-sb.json come from OVMF
package from RHEL-7 (with slight name change to reflect their
features in filename too),

2) bios.json and aavmf.json come from example JSON documents from
firmware.json from qemu's git (3a0adfc9bf),

3) ovmf.json is then copied from ovmf-sb.json and stripped
of SECURE_BOOT and REQUIRES_SMM flags, OVMF path change,
description update and machine type expanded for both pc and q35
machine types.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2019-03-12 15:29:44 +01:00
Shotaro Gotanda
60a0d32e64 tests: Run valgrind with absolute path to suppressions file
So far we are providing the suppressions file with a relative
path to valgrind. This apparently doesn't work on some distros
like Ubuntu and its derivates. Providing the absolute path fixes
the problem.

Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-11 14:59:08 +01:00
John Ferlan
73426c55b7 tests: Introduce storage pool capabilites test
Add a new test for the storage pool capabilities. There will be
one test mocked with every backend available (full) and one where
only the file system pool is available.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-06 11:12:48 -05:00
John Ferlan
5dded8c806 docs: Add schema for storage pool capabilities
Define a schema for the storage pool capabilities along with
a test to show the general format.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-06 11:12:48 -05:00
Cole Robinson
deb3b59b74 tests: Create a shared library with libxl driver
This allows us to mock functions in the libxl driver, like
is already possible for the qemu driver

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-11 17:40:44 -05:00
Cole Robinson
49a0bcfdf2 tests: Rename virmocklibxl.c -> libxlmock.c
Every other mock library is named ending in mock.c, move
virmocklibxl.c to follow that pattern

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-11 17:40:44 -05:00
Peter Krempa
fea4cdd2d2 tests: qemuxml2argv: Remove the 'after startup XML' testing machinery
A lot of code with no real impact and popularity. Remove all the helpers
now that the only test case is gone.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 08:32:40 +01:00
John Ferlan
adb15b5add tests: Add storagepoolxml2argvtest source to EXTRA_DIST
Commit f2f84b4d4 added storagepoolxml2argvtest processing; however,
it didn't follow alter the else to !WITH_STORAGE and add the source
itself to the EXTRA_DIST like the other WITH_STORAGE options for
virstorageutiltest and storagevolxml2argvtest.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2019-01-30 10:35:28 -05:00
John Ferlan
406473990c tests: Fix build issue with storagevolxml2xmltest
Commit 7a227688a caused a build failure on mingw. Following
other uses of including ../src/libvirt_driver_storage_impl.la
I moved to under the WITH_STORAGE conditional.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2019-01-30 10:35:07 -05:00
John Ferlan
7a227688a8 storage: Add infrastructure to manage XML namespace options
Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.

Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.

Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.

Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-29 19:16:13 -05:00
Eric Blake
1862a55462 maint: Prefer AM_CPPFLAGS over INCLUDES
Our use of INCLUDES in Makefile.am hearkens back to when we had to
cater to automake 1.9.6 (thanks, RHEL 5) which lacked AM_CPPFLAGS.
Modern Automake flags a warning that INCLUDES is deprecated, and
now that we mandate RHEL 7 or better (see commit c1bc9c66), we no
longer have to cater to the old spelling.  This change will also
make it easier to do per-binary CPPFLAGS.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-01-07 16:46:55 -06:00
Eric Blake
7a879323a9 maint: Drop unused GETTEXT_CPPFLAGS variable
Commit c0a8ea45 removed the use of gettextize, and the setting of
GETTEXT_CPPFLAGS, but did not scrub the now-unused variable from
Makefile.am snippets.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-01-07 16:45:45 -06:00
Michal Privoznik
1e63dea999 tests: Introduce qemusecuritytest
This test checks if security label remembering works correctly.
It uses qemuSecurity* APIs to do that. And some mocking (even
though it's not real mocking as we are used to from other tests
like virpcitest). So far, only DAC driver is tested.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-19 15:32:43 +01:00