It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that minimum supported qemu version is 2.11, we can remove the
conditions.
Note that the check enabling QEMU_CAPS_TCG was for < 2.10.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We no longer have to mask out IOMMU and NVDIMM support as we no longer
support the broken qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemuCaps is left for the device commandline formatters for now as it
might come in handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All machine types which have PCI support multibus since qemu 2.0
according to the logic we had, thus we can remove all the machine type
and version checks which are now dead code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These strings are not constant really. They are allocated in
qemuDomainObjBeginJobInternal() and freed in
qemuDomainReset*Job(). Freeing a pointer to const looks weird.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jumping back in the code is an anti-pattern that should be avoided if
possible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't require that the data is consistent on the destination if
aborting the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rename the parameter so that it's more clear what state we are in and
fix all callees.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of job refresh, we are killing off any unknown jobs so we don't
care about their fate.
Another difference is that an possible error from the block job
cancellation might be reported, but we don't really care here ince
it's a very unlikely scenario and we also report a warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of backup jobs we can cancel the jobs forcefully since the code
is on a cleanup path when the job fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'block-job-cancel' has one very important semantic difference to
'job-cancel', docummented in qemu as:
Note that if you issue 'block-job-cancel' after 'drive-mirror' has indicated
(via the event BLOCK_JOB_READY) that the source and destination are
synchronized, then the event triggered by this command changes to
BLOCK_JOB_COMPLETED, to indicate that the mirroring has ended and the
destination now has a point-in-time copy tied to the time of the cancellation.
Since libvirt advertises the block copy job as having the synchronous
abort feature we must not use 'job-cancel' here.
Fixes: 4817b5ca1d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain cases such as when aborting migration we don't really care
for completion of the blockjob. Add 'force' as parameter of
'block-job-cancel'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't try to setup disk migration and the NBD stuff if we end up
migrating nothing.
The destination side has luckily no setup for the non-NBD cases so
omitting the element fully is okay.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't even try to setup storage migration if there are no eligible
disks.
This also fixes migration from older libvirts which didn't format an
empty <nbd/> element in the migration cookie if there weren't any disks
to migrate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Base the decision on the main API flags (VIR_MIGRATE_NON_SHARED_DISK,
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) via a boolean 'storageMigration'
rather than juggling everything trhough 'migration_flags'.
After this patch 'migration_flags' is updated to contain the legacy
storage migration flags only when we'll be about to use it rather than
setting it and then resetting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'migrate_flags' can be updated in the only caller and since
qemuMigrationSrcNBDStorageCopy already takes @flags which contains
VIR_MIGRATE_NON_SHARED_INC (used to set
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) we can completely remove the
parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the 'nbdURI' schema is not known the code would report an error
but wouldn't return failure.
Fixes: 49186372db
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 518be41aaa refactored qemuMigrationCookieNBDXMLFormat to use
virXMLFormatElement which in comparison to the previous code doesn't
format the element if it's empty.
Unfortunately some crusty bits of our migration code use questionable
logic to assert use of the old-style storage migration parameters which
breaks if no disks are being migrated and the <nbd/> element is not
present.
While later patches will fix the code, re-instate formatting of empty
<nbd/> for increased compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When placing vCPUs into CGroups the qemuProcessSetupPid() is
called which then enters a for() loop (around its middle) where
it calls virDomainNumaGetNodeCpumask() for each guest NUMA node.
But the latter returns only a pointer not new reference/copy and
thus the caller must not free it. But the variable is decorated
with g_autoptr() which leads to a double free.
Fixes: 2d37d8dbc9
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Copy the socket path in qemuExtDevicesStart, because
for libvirt-managed virtiofsd daemons the path is filled there
in qemuVirtioFSStart.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain rare occasions qemu can transition a block job which was
already 'ready' into 'standby' and then back. If this happens in the
following order libvirt will get confused about the actual job state:
1) the block copy job is 'ready' (job->state == QEMU_BLOCKJOB_STATE_READY)
2) user calls qemuDomainBlockJobAbort with VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT
flag but without VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC
3) the block job is switched to synchronous event handling
4) the block job blips to 'standby' and back to 'ready', the event is
not processed since the blockjob is in sync mode for now
5) qemuDomainBlockJobPivot is called:
5.1) 'job-complete' QMP command is issued
5.2) job->state is set to QEMU_BLOCKJOB_STATE_PIVOTING
6) code for synchronous-wait for the job completion in qemuDomainBlockJobAbort
is invoked
7) the waiting loop calls qemuBlockJobUpdate:
7.1) job->newstate is QEMU_BLOCKJOB_STATE_READY due to 4)
7.2) qemuBlockJobEventProcess is called
7.3) the handler for QEMU_BLOCKJOB_STATE_READY overwrites
job->state from QEMU_BLOCKJOB_STATE_PIVOTING to QEMU_BLOCKJOB_STATE_READY
8) qemuDomainBlockJobAbort is looking for a finished job, so waits again
9) qemu finishes the blockjob and transitions it into 'concluded' state
10) qemuBlockJobUpdate is triggered again, this time finalizing the job.
10.1) job->newstate is = QEMU_BLOCKJOB_STATE_CONCLUDED
job->state is = QEMU_BLOCKJOB_STATE_READY
10.2) qemuBlockJobEventProcessConcluded is called, the function
checks whether there was an error with the blockjob. Since
there was no error job->newstate becomes
QEMU_BLOCKJOB_STATE_COMPLETED.
10.3) qemuBlockJobEventProcessConcludedTransition selects the action
for the appropriate block job type where we have:
case QEMU_BLOCKJOB_TYPE_COPY:
if (job->state == QEMU_BLOCKJOB_STATE_PIVOTING && success)
qemuBlockJobProcessEventConcludedCopyPivot(driver, vm, job, asyncJob);
else
qemuBlockJobProcessEventConcludedCopyAbort(driver, vm, job, asyncJob);
break;
Since job->state is QEMU_BLOCKJOB_STATE_READY,
qemuBlockJobProcessEventConcludedCopyAbort is called.
This patch forbids transitions to QEMU_BLOCKJOB_STATE_READY if the
previous job state isn't QEMU_BLOCKJOB_STATE_RUNNING or
QEMU_BLOCKJOB_STATE_NEW.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1951507
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function in question uses "tc" binary so virnetdevbandwidth feels
like better place for it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a disk bus value represending no selected bus. This will help split
up the XML parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainBlockCopy needs just the source portion of the disk but uses
the disk parser for it. Since we have a specific function now, refactor
the code to avoid having to deal with the unused virDomainDiskDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that the wrong "VIR_TRISTATE_*_ABSENT" was used in qemuDomainChangeNet.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virMediatedDeviceGetSysfsPath() (via g_strdup_printf()) is guaranteed to
return a non-NULL value, so remove the unnecessary checks for NULL.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When querying guest info via virDomainGetGuestInfo() the
'guest-get-disks' agent command is called. It may report disk
serial number which we parse, but never report nor use for
anything else.
As it turns out, it may help management application find matching
disk in their internals.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The comment for that option states that the default value is 'none' but
it was not set by the code. By default the value is NULL which results
into the following warning:
warning : qemuBuildCompatDeprecatedCommandLine:10393 : Unsupported deprecation behavior '(null)' for VM 'test'
Fixes: 7004504493
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When doing a blockpull with NULL base the full contents of the disk are
pulled into the topmost image which then becomes fully self-contained.
qemuBlockJobProcessEventCompletedPull doesn't install the backing chain
terminators though, although it's guaranteed that there will be no
backing chain behind disk->src.
Add the terminators for completness and for disabling backing chain
detection on further boots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When doing a full block pull job (base == NULL) and the config XML
contains a compatible disk, the completer function would leave a
dangling pointer in 'cfgdisk->src->backingStore' as cfgdisk->src would
be set to the value of 'cfgbase' which was always set to
'cfgdisk->src->backingStore'.
This is wrong though since for the live definition XML we set the
respective counterpart to 'job->data.pull.base' which is NULL in the
above scenario.
This leads to a invalid pointer read when saving the config XML and may
end up in a crash.
Resolve it by setting 'cfgbase' only when 'job->data.pull.base' is
non-NULL.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1946918
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Prevent unbounded chains by limiting the recursion depth of
virStorageSourceGetMetadataRecurse to the maximum number of image layers
we limit anyways.
This removes the last use of virStorageSourceGetUniqueIdentifier which
will allow us to delete some crusty old infrastructure which isn't
really needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it possible to enable stable NIC device names in most modern
Linux distros.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This property is exposed by QEMU on any PCI device, but we have to pick
some specific device(s) to probe it against. We expect that at least one
of the virtio devices will be present, so probe against them.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The compiler can more easily optimize a switch, and more importantly can
also warn when new address types are added which are not handled.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Enable '-compat' if requested in qemu.conf and supported by qemu to
instruct qemu to crash when a deprecated command is used and stop
returning deprecated fields.
This setting is meant for libvirt developers and such.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Similar to the qemu.conf knob 'deprecation_behavior' add a per-VM knob
in the QEMU namespace:
<qemu:deprecation behavior='...'/>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
New QEMU supports a harsh, but hard to ignore way to notify that the
QMP user used a deprecated command. This is useful e.g. for developers
to see that something needs to be fixed.
This patch introduces a qemu.conf option to enable the setting in cases
when qemu supports it so that developers and continiuous integration
efforts are notified about use of deprecated fields before it's too
late.
The option is deliberately stored as string and not validated to prevent
failures when downgrading qemu or libvirt versions. While we don't
support this, the knob isn't meant for public consumption anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The capability is asserted if qemu supports the -compat
deprecated-input= and deprecated-output= settings to control what should
happen if deprecated fields are used in QMP.
This will be used for a developer/tester-oriented setting which will
aid us in catching use of deprecated settings sooner.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This API talks to QEMU and changes its internal state. Therefore,
it should acquire QEMU_JOB_MODIFY instead of QEMU_JOB_QUERY.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Recently, a few commits back I've switched bunch of code to
g_steal_pointer() using coccinelle. Problem was that the semantic
patch used was slightly off:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Problem is that, "... when != a" is supposed to jump over those
lines, which don't contain expression a. My idea was to replace
the following pattern too:
ptrX = ptrY;
if (something(ptrZ) < 0) goto error;
ptrY = NULL;
But what I missed is that the following pattern is also matched
and replaced:
ptrX = ptrY;
if (something(ptrX) < 0) goto error;
ptrY = NULL;
This is not necessarily correct - as demonstrated by our hotplug
code. The real problem is ambiguous memory ownership transfer
(functions which add device to domain def take ownership only on
success), but to not tackle the real issue let's revert those
parts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The order in which virNetworkUpdate() accepts @section and
@command arguments is not the same as in which it passes them
onto networkUpdate() callback. Until recently, it did not really
matter, because calling the API on client side meant arguments
were encoded in reversed order (compared to the public API), but
then on the server it was fixed again - because the server
decoded RPC (still swapped), called public API (still swapped)
and in turn called the network driver callback (with reversing
the order - so magically fixing the order).
Long story short, if the public API is called even number of
times those swaps cancel each other out. The problem is when the
API is called an odd numbed of times - which happens with split
daemons and the right URI. There's one call in the client (e.g.
virsh net-update), the other in a hypervisor daemon (say
virtqemud) which ends up calling the API in the virnetworkd.
The fix is obvious - fix the order in which arguments are passed
to the callback.
But, to maintain compatibility with older, yet unfixed, daemons
new connection feature is introduced. The feature is detected
just before calling the callback and allows client to pass
arguments in correct order (talking to fixed daemon) or in
reversed order (talking to older daemon).
Unfortunately, older client talking to newer daemon can't be
fixed. Let's hope that it's less frequent scenario.
Fixes: 574b9bc66b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870552
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like VFIO devices, vDPA devices may need to have all guest memory
pages locked/pinned in order to operate properly. In the case of VFIO
devices (including mdev and NVME, which also use VFIO) libvirt
automatically increases the locked memory limit when one of those
devices is present. This patch modifies that code to also increase the
limit if there are any vDPA devices present.
Resolves: https://bugzilla.redhat.com/1939776
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is a specialized version of
qemuDomainGetMemLockLimitBytes() for PPC64. Simplifying it in the same
manner as the previous patch has the nice side effect of accounting
for the possibility of an mdev device
(I don't know if mdev devices are supported on PPC, but even if not
then a) the additional check for mdev devices gained by using
qemuDomainNeedsVFIO() in place of open coding will be an effective
NOP, and b) if mdev devices are supported on PPC64 in the future, this
function will be prepared for it).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function goes through a loop checking if each hostdev is a VFIO
or mdev device, and then later it calls virDomainDefHasNVMEDisk(). The
function qemuDomainNeedsVFIO() does exactly the same thing, so let's
just call that instead.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Generated by the following spatch:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When a checkpoint is redefined without providing the domain XML, we
might end up with a definition where the per-disk bitmap name is not
set. Trying to delete such checkpoint would lead to a crash.
Refuse such deletion.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1941600
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the detection on the presence of the 'secret' qom-type entry, which
isn't conditionally compiled in qemu.
All caps-based test now switch to using JSON for -object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Skip the lossy conversion to legacy commandline arguments by using the
JSON props directly when -object is QAPIfied. This avoids issues with
conversion of bitmaps and also allows validation of the generated JSON
against the QMP schema in the tests.
Since the new approach is triggered by a qemu capability the code
from 'virQEMUBuildObjectCommandlineFromJSON' in util/virqemu.c was moved
to 'qemuBuildObjectCommandlineFromJSON' in qemu/qemu_command.c which has
the virQEMUCaps type.
Some functions needed to be modified to propagate qemuCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Set 'objectAddNoWrap' when the capability is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's just one caller left. Since qemuBuildMemoryBackendProps is too
complex to be modified for now, just move the adding of 'id' and 'qom'
type directly into the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Construct the JSON object which is used for object-add without the
'props' wrapper and add the wrapper only in the monitor code.
This simplifies the JSON->commandline generator in the first place and
also prepares for upcoming qemu where 'props' will be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting from qemu-6.0 the parameters of -object/object-add are formally
described by the QAPI schema. Additionally this changes the nesting of
the properties as the 'props' nested object will be flattened to the
parent.
We'll need to detect whether qemu switched to this new approach to
generate the objects with proper nesting and also allow testing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virQEMUCapsGet checks for qemuCaps itself, no need to do it explicitly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In case an async job spans multiple APIs (e.g., incoming migration) the
API that started the job is recorded as the asyncOwnerAPI even though it
is no longer running and the owner thread is updated properly to the one
currently handling the job. Let's also update asyncOwnerAPI to make it
more obvious which is the current (or the most recent) API involved in
the job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Attempting to set the memlock limit might fail if we're running
in a containerized environment where CAP_SYS_RESOURCE is not
available, and if the limit is already high enough there's no
point in trying to raise it anyway.
https://bugzilla.redhat.com/show_bug.cgi?id=1916346
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store the current memory locking limit and the desired one
separately, which will help with later changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we've implemented a fallback for the function that
obtains the information from /proc, there is no reason we would
get a failure unless there's something seriously wrong with the
environment we're running in, in which case we're better off
reporting the issue to the user rather than pretending
everything is fine.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the backup job is terminated normally the security label is
restored by the blockjob finishing handler.
If the VM dies or is destroyed that wouldn't happen as the blockjob
handler wouldn't be called.
Restore the security label on disk store where we remember that the job
was running at the point when 'qemuBackupJobTerminate' was called.
Not resetting the security label means that we also leak the xattr
attributes remembering the label which prevents any further use of the
file, which is a problem for block devices.
This also requires that the call to 'qemuBackupJobTerminate' from
'qemuProcessStop' happens only after 'vm->pid' was reset as otherwise
the security subdrivers attempt to enter the process namespace which
fails if the process isn't running any more.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1939082
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBackupBegin can take a full backup of the disks (excluding any
operations with bitmaps) without the need to wait for the
blockdev-reopen support in qemu.
Add a check that no checkpoint creation is required and the disk backup
mode isn't VIR_DOMAIN_BACKUP_DISK_BACKUP_MODE_INCREMENTAL.
Call to virDomainBackupAlignDisks is moved earlier as it initializes the
disk backup mode if not present in user config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming commit will enable full backup support (incremental part
requires blockdev-reopen, which won't happen in qemu for at least
another release).
Add a capability that the 'blockdev-backup' job is supported by qemu
capped, but limited to when qemu supports QEMU_CAPS_BLOCKDEV.
We can also use it in the expression to enable
QEMU_CAPS_INCREMENTAL_BACKUP since it's a pre-requisite too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend dirtyrate statistics for domGetStats to display the information
of a domain's memory dirty rate produced by domainStartDirtyRateCalc.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_idle_add function adds a callback to the primary GMainContext.
To workaround the GSource unref bugs, we need to add our callbacks
to the GMainContext that is associated with the GSource being
unref'd. Thus code using the per-VM virEventThread must use its
private GMainContext.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When connecting to the monitor, a timeout is calculated that is
bigger the more memory guest has (because QEMU has to allocate
and possibly zero out the memory and what not, empirically
deducted). However, when computing the timeout the @total_memory
mmember is accessed directly even though
virDomainDefGetMemoryTotal() should have been used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When switching to g_autoptr this was incorrectly changed from
'continue;' into 'return -1;' resulting into an error when user tries
to set vcpu_quota of running VM:
error: An error occurred, but the cause is unknown
Fixes: e4a8bbfaf2
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In short, virXXXPtr type is going away. With big bang. And to
help us rewrite the code with a sed script, it's better if each
variable is declared on its own line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu shim spawns a separate thread in which the event loop is
ran. The virEventRunDefaultImpl() call is wrapped in a while()
loop, just like it should. There are few lines of code around
which try to ensure that domain is destroyed (when quitting) and
that the last round of event loop is ran after the
virDomainDestroy() call. Only after that the loop is quit from
and the thread quits.
However, if domain creation fails, there is no @dom to call
destroy over, the @quit flag is never set and while() never
exits. Set the flag regardless of @dom pointer.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1920337
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The commandline generator for 'iothread' objects has a private
implementation of the properties. Convert it to JSON so that it can be
later validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the 'sev0' sev-guest object will never be hotplugged, but we want
to generate it through JSON so that we'll be able to validate all
parameters of '-object' against the QAPI schema once 'object-add' is
qapified in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the 'masterKey0' secret object will never be hotplugged we want to
generate it through JSON so that we'll be able to validate all
parameters of '-object' against the QAPI schema once 'object-add' is
qapified in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This problem is reproducible only with secret driver. When
starting a domain via virt-qemu-run and both secret and
(nonexistent) root directory specified this is what happens:
1) virt-qemu-run opens "secret:///embed?root=$rootdir"
connection, which results in the secret driver initialization
(done in secretStateInitialize()). During this process, the
driver creates its own configDir (derived from $rootdir)
including those parents which don't exists yet. This is all
done with the mode S_IRWXU and thus results in the $rootdir
being created with very restrictive mode (specifically, +x is
missing for group and others).
2) now, virt-qemu-run opens "qemu:///embed?root=$rootdir" and
calls virDomainCreateXML(). This results in the master-key.aes
being written somewhere under the $rootdir and telling qemu
where to find it.
But because the secret driver created $rootdir with too
restrictive mode, qemu can't access the file (even though it
knows the full path) and fails to start.
It looks like the best solution is to pre-create the root
directory before opening any connection (letting any driver
initialize itself) and set its mode to something less
restrictive.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1859873
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit cb29e4e801 didn't take into account that the VM can be inactive
when it's destroyed. This means that the job would remain active also
when the VM became inactive.
To fix this properly:
1) Remove the bogus VM liveness check and early return
(reverts the aforementioned commit)
2) Conditionalize the stats assignment only when the stats object is
present
(properly fix the crash when VM dies when reconnecting)
3) end the asyncjob only when it was already set
(prevent corruption of priv->jobs_queued)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1937598
Fixes: cb29e4e801
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuBackupJobTerminate' needs the API flags to see whether
VIR_DOMAIN_BACKUP_BEGIN_REUSE_EXTERNAL. Unfortunately when called via
qemuProcessReconnect()->qemuProcessStop() early (e.g. if the qemu
process died while we were reconnecting) the job is cleared temporarily
so that other APIs can be called. This would mean that we couldn't clean
up the files in some cases.
Save the 'apiFlags' inside the backup object and set it from the
'qemuDomainJobObj' 'apiFlags' member when reconnecting to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to using the 'g_auto*' helpers.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -audiodev arg is a new way to configure audio devices in QEMU to
replace the QEMU_AUDIO_DRV env variable. This arg is not visible in
the "query-command-line-options" output since it is entirely QAPI
driven, not QemuOpts. It also isn't in "query-qmp-schema" though
since there's no QMP command that uses the Audiodev type yet.
So probe for the existance of this feature by looking for the
-vnc "audiodev" property. This won't let us determine which
precise audio backends QEMU has been built with, but for now
that's no worse than with env variables today.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
- VNC - set to "none", unless passthrough of host env variable is set
- SPICE - always set to "spice"
- SDL - always passthrough host env
- No graphics - set to "none", unless passthrough of host env variable is set
The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.
If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.
This introduces support for configuring audio backends from the <audio>
elements in the XML config.
The existing default behaviour is now only used if no <audio> element is
present.
All except the 'jack' audio driver are supported via QEMU's old env
variable config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The check for ICH6 || ICH9 is repeated in many places in the code. The
new virDomainSoundModelSupportsCodecs() method provides a helper to
standardize this check.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds delay time (steal time inside guest) to libvirt
domain per-vcpu stats. Delay time is an important performance metric.
It is a consequence of the overloaded CPU. Knowledge of the delay
time of a virtual machine helps to understand if it is affected and
estimate the impact.
As a result, it is possible to react exactly when needed and
rebalance the load between hosts. This is used by cloud providers
to provide quality of service, especially when the CPU is
oversubscribed.
It's more convenient to work with this metric in a context of a
libvirt domain. Any monitoring software may use this information.
Signed-off-by: Aleksei Zakharov <zaharov@selectel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Failure of 'qemuMigrationSetDBusVMState' would jump to 'exit_monitor'
but the function isn't called inside of the monitor context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
That's more consistent with our usual naming convention.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code is written under the assumption that, for all
limits except the core size, asking for the limit to be set to
zero is a no-op, and so the operation is performed
unconditionally.
While this is the behavior we want for the QEMU driver, the
virCommand and virProcess facilities are generic, and should not
implement this kind of policy: asking for a limit to be set to
zero should result in that limit being set to zero every single
time.
Add some checks in the QEMU driver, effectively moving the
policy where it belongs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuProcessLaunch() is the correct place to set process limits,
and in fact is where we were dealing with almost all of them,
but the memory locking limit was handled in
qemuBuildCommandLine() instead for some reason.
The code is rewritten so that the desired limit is calculated
and applied in separated steps, which will help with further
changes, but this doesn't alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Doing this now will make the next changes nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function is used to automatically feed a buffer into a pipe which
can be used by the command to read contents of the buffer.
Rather than passing in a pipe, let's create the pipe inside
virCommandSetSendBuffer and directly associate the reader end with the
command. This way the ownership of both ends of the pipe will end up
with the virCommand right away reducing the need of cleanup in callers.
The returned value then can be used just to format the appropriate
arguments without worrying about cleanup or failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is constructing an error message from a prefix and the
contents of the qemu log file. Marking just two string modifiers as
translatable is pointless and will certainly confuse translators.
Remove the marking and add a comment which bypasses the
sc_libvirt_unmarked_diagnostics check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that error message formatting doesn't use fixed size buffers we can
drop the math for calculating the maximum chunk of log to report in the
error message and use a round number. This also makes it obvious that
the chosen number is arbitrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the crash workaround:
commit 0db4743645
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Jul 28 16:52:47 2020 +0100
util: avoid crash due to race in glib event loop code
we need to do this in the other event loop as crash in that one was also
reported:
https://bugzilla.redhat.com/show_bug.cgi?id=1931331
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Generated using the following spatch:
@@
expression path;
@@
- virFileMakePath(path)
+ g_mkdir_with_parents(path, 0777)
However, 14 occurrences were not replaced, e.g. in
virHostdevManagerNew(). I don't really understand why.
Fixed by hand afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These functions are identical. Made using this spatch:
@@
expression path, mode;
@@
- virFileMakePathWithMode(path, mode)
+ g_mkdir_with_parents(path, mode)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we enforce the cpu.shares range kernel will no longer silently
change the value that libvirt configures so there is no need to read
the value back to get the actual configuration.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest with TPM of type='emulator' an external
process is started with it (swtpm) to emulate TPM. This external
process is passed path to a log file via --logfile. The path to
the log file is generated in qemuTPMEmulatorPrepareHost() which
works, until the daemon is restarted. The problem is that the
path is not stored in private data or anywhere inside live XML
and thus later, when qemuExtTPMStop() is called (when shutting
off the guest) the stored logpath is NULL and thus its seclabel
is not cleaned up (see virSecuritySELinuxRestoreTPMLabels()).
Fortunately, qemuExtDevicesStop() (which calls qemuExtTPMStop()
eventually) does call qemuExtDevicesInitPaths() where the log
path can be generated again.
Basically, tpm->data.emulator.storagepath is generated in
qemuExtTPMInitPaths() and its seclabels are restored properly,
and this commit move logfile onto the same level.
This means, that the log path doesn't have to be generated in
qemuExtDevicesStart() because it was already done in
qemuExtDevicesPrepareHost().
This change also renders @vmname argument of
qemuTPMEmulatorPrepareHost() unused and thus is removed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1769196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Strictly not needed, but the rest of paths is generated in
separate functions. Helps with code readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to bother with cgroup tearing down for absent
PCI devices, given that their entries in the sysfs are already
gone.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If the VM isn't active calculating the job stats doesn't make sense.
Additionally this prevents a crash of libvirtd if qemu terminates while
libvirt wasn't running:
Thread 28 "init-backup-tes" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffb9310640 (LWP 3201116)]
qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
275 if (!jobInfo->started)
(gdb) bt
#0 qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
#1 0x00007fffcba1a12d in qemuBackupJobTerminate (vm=0x7fff9c1bc840, jobstatus=QEMU_DOMAIN_JOB_STATUS_CANCELED) at ../../../libvirt/src/qemu/qemu_backup.c:563
#2 0x00007fffcbaefcae in qemuProcessStop
(driver=0x7fff9c144ff0, vm=0x7fff9c1bc840, reason=VIR_DOMAIN_SHUTOFF_DAEMON, asyncJob=QEMU_ASYNC_JOB_NONE, flags=<optimized out>)
at ../../../libvirt/src/qemu/qemu_process.c:7812
#3 0x00007fffcbaf2a10 in qemuProcessReconnect (opaque=<optimized out>) at ../../../libvirt/src/qemu/qemu_process.c:8578
#4 0x00007ffff7c46bb5 in virThreadHelper (data=<optimized out>) at ../../../libvirt/src/util/virthread.c:233
#5 0x00007ffff6e453f9 in start_thread () at /lib64/libpthread.so.0
#6 0x00007ffff766fb53 in clone () at /lib64/libc.so.6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will remove unnecessary actions if the VM crashed. The
cleanup needs to be performed always, thus needs to be moved earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The most important bit is that the caller is expected to pass
locked monitor.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Using the job owner API name directly works fine as long as it is a
static string or the owner's thread is still running. However, this is
not always the case. For example, when the owner API name is filled in a
job when we're reconnecting to existing domains after daemon restart,
the dynamically allocated owner name will disappear with the
reconnecting thread. Any follow up usage of the pointer will read random
memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 010ed0856b and commit db64acfbda introduced the ability to use
the <teaming> element in a generic <hostdev> (previously it could only
be used with <interface type='hostdev'>). However, the patch omitted
one crucial detail - along with parsing the <teaming> element in
<hostdev>, and adding the necessary info to the qemu commandline, we
also need to modify qemuMigrationSrcIsAllowedHostdev() to allow
migration when the generic <hostdev> has a <teaming> element.
https://bugzilla.redhat.com/1927984
Fixes: 010ed0856b
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuMonitorUnregister will be called in multiple threads (e.g. threads
in rpc worker pool and the vm event thread). In some cases, it isn't
protected by the monitor lock, which may lead to call g_source_unref
more than one time and a use-after-free problem eventually.
Add the missing lock in qemuProcessHandleMonitorEOF (which is the only
position missing lock of monitor I found).
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent object takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For incremental backup we need QEMU_CAPS_BLOCKDEV,
QEMU_CAPS_BLOCKDEV_REOPEN, QEMU_CAPS_MIGRATION_PARAM_BLOCK_BITMAP_MAPPING.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Preserve block dirty bitmaps after migration with
QEMU_MONITOR_MIGRATE_NON_SHARED_(DISK|INC).
This patch implements functions which offer the bitmaps to the
destination, check for eligibility on destination and then configure
source for the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In case when the block migration job required temporary bitmaps for
merging the appropriate checkpoints we need to clean them up when
cancelling the job. On success we don't need to do that though as the
bitmaps are just temporary thus are not written to disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add status XML infrastructure for storing a list of block dirty bitmaps
which are temporarily used when migrating a VM with
VIR_MIGRATE_NON_SHARED_DISK for cleanup after a libvirtd restart during
migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'qemuMigrationCookieBlockDirtyBitmapsMatchDisks' maps the bitmaps from
the migration cookie to actual disk objects definition pointers.
'qemuMigrationCookieBlockDirtyBitmapsToParams' converts the bitmap
definitions from the migration cookie into parameters for the
'block-bitmap-mapping' migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
