Fix the referenced anchor in 'formatdomain.rst' right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The first sentence was moved up a paragraph to stop treating the first
sub-heading as a page subtitle.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In 0895a0e, it was noted that the "sockets" value in the topology
section of capabilities reflects not the number of sockets per NUMA
node, not the total number.
Unfortunately, the fix was applied to the wrong place: the domain XML
format documentation, not that for the capabilities output. And, in
fact, the domain XML interprets "sockets" as the total number, not a
per-node value.
Back out this change in favour of a note in the capabilities
documentation instead.
Fixes: 0895a0e75d
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Upcoming patches will add possibility to override configuration of a
device with custom properties as a more versatile replacement to using
QEMU's '-set' parameter, which doesn't work when we use JSON to
instantiate devices.
Describe the XML used for the override as well as expectations of
upstream support in case something breaks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 150540394d.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
Some versions of Windows hang on reboot if their TSC value is greater
than 2^54. The workaround is to reset the TSC to a small value. Add
to the domain configuration an attribute for this. It can be used
by QEMU and in principle also by ESXi, which has a property called
monitor_control.enable_softResetClearTSC as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since its v5.0.0 release QEMU is capable of specifying number of
threads used to allocate memory. It defaults to 1, which may be
too low for humongous guests with gigantic pages.
In general, on QEMU cmd line level it is possible to use
different number of threads per each memory-backend-* object, in
practical terms it's not useful. Therefore, use <memoryBacking/>
to set guest wide value and let all memory devices 'inherit' it,
silently. IOW, don't introduce per device knob because that would
only complicate things for a little or no benefit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
schemas are used for more than just documentation,
virsh edit fails if schemas are not available.
Therefore, fix the no-docs build by moving schemas/
to the parsing code inside src/conf/.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The idea of the manual mode is to allow a synchronized snapshot in cases
when the storage is outsourced to an unmanaged storage provider which
requires cooperation with snapshotting.
The mode will instruct the hypervisor to pause along when the other
components are snapshotted and the 'manual' disk can be snapshotted
along. This increases latency of the snapshot but allows them in
otherwise impossible situations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I introduced support for these vim plugins several years ago
but have since moved away from them. These days developers
are likely better served by lsp-based tooling, which doesn't
require additional per-project configuration.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the hostname of the NBD server doesn't match the hostname
in the TLS certificate the new attribute 'tlsHostname' can be used to
override it.
Add the XML infrastructure and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Document our usage of GitLab and the read-only mirrors.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With the introduction of smart HTTP protocol in git 1.6.6,
the only advantage of plain git:// over https:// is not
having the encryption overhead.
Remove the reference to git://, assuming the overhead
is neligible compared to the value of screen space
on the downloads page.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the mirrors themselves are still available, the gitweb
interface on libvirt.org has been disabled.
The mirrors can still be accessible via, e.g.:
git clone https://libvirt.org/git/libvirt-python.git
But such link gives a 404 error. Remove the links from the website
to avoid confusion.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The table was manually converted to a set of 'list-table'-s for better
experience of viewing the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The security label setting for the external images is part of the
'source' element and documented there. Remove the empty definition added
accidentally in commit ac88a8cfad
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In blockdev mode we support creating snapshots on all kinds of storage
that qemu allows us to format the image. Drop the part of the sentence
enumerating explicitly supported protocols.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There was another paragraph describing the attribute 'type' of the
'disk' element under the description of the subelements. Move it to the
top to get all relevant information in one place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'Branch fixing policy' paragraph claims that we have at least one
actively maintained stable branch which isn't currently the case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The examples contain some whitespace and command prompts which just
waste space.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also update the link from 'formatstorageencryption' to the
'usage-type-volume' anchor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extra care is taken to preserve the 'codeofconduct' anchor which is used
in our page template. Upcoming patch will change that but we'll retain
the anchor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
