The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.
Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the schema to allow a VxHS block device. Sample XML is:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
<serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
Update the html docs to describe the capability for VxHS.
Alter the qemuxml2xmltest to validate the formatting.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Alter the example to remove the <auth> from:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:1' mode='host'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdb' bus='virtio'/>
</disk>
and
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:2' mode='direct'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdc' bus='virtio'/>
</disk>
The reality is, it's not even used. For a <source pool> the authdef
from the storage source pool will supercede whatever is in the <disk>
definition during virStorageTranslateDiskSourcePool processing. In fact,
if the pool doesn't have/need authentication, then the authdef would
be removed anyway as the storage pool would be handling things.
The "proof" for this is in the adjustment to the test to add an
<auth> for a disk. The resulting .args file won't add what normally
would be added "myname:encodedpassword@" prior to the hostname in
the IQN (e.g. iscsi://myname:encodedpassword@iscsi.example.org:3260/...
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
During post parse, for any iSCSI disk or hostdev, scan the source
path looking for the presence of '/', if found, then we can assume
the LUN is provided. If not found, alter the input XML to add the
"/0". This will cause the generated XML to have the generated
value when the domain config is saved after post parse.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element. This is not extendable.
Use the new virXMLFormatElement() to properly format the source
element with possible child elements.
As a side effect it fixes a bug in disk source formatting.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
My commit 0c1d863 broke formatting of passthrough smartcard devices:
<smartcard mode='passthrough' type='spicevmc'/>
resulted in invalid XML:
<smartcard mode='passthrough'>
type='spicevmc'>
<address type='ccid' controller='0' slot='0'/>
</smartcard>
Split out chardev source formatting function into two -
one formatting the attributes and other formatting the subelements.
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
While using "definitely-not-virtio" as a model name is very
cute, it will also cause the relevant test to fail once we
introduce stricter validation.
Use "e1000", which is definitely not virtio but also a valid
model name, instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
PCI bus has to be numbered sequentially, and no index can be
missing, so libvirt will fill in the blanks automatically for
the user.
Up until now, it has done so using either pci-bridge, for machine
types based on legacy PCI, or pcie-root-port, for machine types
based on PCI Express. Neither choice is good for pSeries guests,
where PHBs (pci-root) should be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These tests demonstrate that, while it's now possible for the
user to create PHB explicitly and manually assign devices to
them, libvirt still defaults to extending the guest PCI
topology using PCI bridges and making suboptimal device
placement choices.
The next few commits will improve on these behaviors and the
tests outputs will automatically be updated to reflect this.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon need the new information; luckily,
we can figure it out automatically most of the time, so
users won't have to worry about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.
virStorageSourceNetworkDefaultPort does not need to be exported any
more.
Several cases have incidental <serial> or <console> XML which aren't
the features being tested for. Upcoming changes will cause some
churn here, so instead drop these bits now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This demonstrates that the previous qemu caps changes will use
-chardev for pci-serial on aarch64 machvirt
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of hugepage enabled domains for qemuxml2argvtest.
Unfortunately, often when adding a test case there I forget to
add it to xml2xml test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
Currently, we are querying for vhostuser interface name in post
parse callback. At that time interface might not yet exist.
However, it has to exist when starting domain. Therefore it makes
more sense to query its name at that point. This partially
reverts 57b5e27.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make the decision based on the usage of childBuf buffer.
This fixes the oddity in the test case introduced by commit c1c4d0d
where we would format an empty pair tag.
There are currently some limitations in the emulated GICv3
that make it unsuitable as a default. Use GICv2 instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption. Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.
The UNIX path isn't stored in config XML since libvirt-1.3.1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.
Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virt type for QEMU can be modified by -machine attribute "accel"
so there is no need to have different QEMU binary paths.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
