Since commit 55ace7c478, the sockettest
fails without VIR_TEST_DEBUG set. The problem is found by test number
42 (co-incidence?), which tests range '192.168.122.1' -
'192.168.122.255' in network '192.168.122.0/24'. That is supposed to
fail because the end address is equal to the broadcast address.
When comparing these two in 'virSocketAddrEqual(end, &broadcast)',
there is a check for sin_addr as well as for sin_port. That port,
however, is different when we do not enable test debugging. With the
testing enabled, the port is 0 (correctly initialized), but without that
it has a random number there. And that's because the structure is not
initialized anywhere.
By zeroing the structure before filling in the info, we make sure we
return only the address and not any information that was not requested.
And the test work once again.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are now many more reasons that virSocketAddrGetRange() could
fail, so it is much more informative to report the error there instead
of in the caller. (one of the two callers was previously assuming
success, which is almost surely safe based on the parsing that has
already happened to the config by that time, but it still is nicer to
account for an error "just in case")
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
virSocketAddrGetRange() has been updated to take the network address
and prefix, and now checks that both the start and end of the range
are within that network, thus validating that the entire range of
addresses is in the network. For IPv4, it also checks that ranges to
not start with the "network address" of the subnet, nor end with the
broadcast address of the subnet (this check doesn't apply to IPv6,
since IPv6 doesn't have a broadcast or network address)
Negative tests have been added to the network update and socket tests
to verify that bad ranges properly generate an error.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=985653
Build with clang fails with:
CC util/libvirt_util_la-virsocketaddr.lo
util/virsocketaddr.c:904:17: error: cast from 'struct sockaddr *' to
'struct sockaddr_in *' increases required alignment from 1 to 4
[-Werror,-Wcast-align]
inet4 = (struct sockaddr_in*) res->ai_addr;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virsocketaddr.c:909:17: error: cast from 'struct sockaddr *' to
'struct sockaddr_in6 *' increases required alignment from 1 to 4
[-Werror,-Wcast-align]
inet6 = (struct sockaddr_in6*) res->ai_addr;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
Fix that by replacing virSocketAddrParseInternal() call with
virSocketAddrParse() in the virSocketAddrIsNumericLocalhost() function.
virSocketAddrParse stores an address in virSocketAddr.
virSocketAddr uses a union to store an address, so it doesn't
need casting.
if specifying migration_host to an Ipv6 address without brackets,
it was resolved to an incorrect address, such as:
tcp:2001:0DB8::1428:4444,
but the correct address should be:
tcp:[2001:0DB8::1428]:4444
so we should add brackets when parsing it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
The virSocketAddrMask method did not initialize all fields
in the sockaddr_in6 struct. In paticular the 'sin6_scope_id'
field could contain random garbage, which would in turn
affect the result of any later virSocketAddrFormat calls.
This led to ip6tables rules in the FORWARD chain which
matched on random garbage sin6_scope_id. Fortunately these
were ACCEPT rules, so the impact was merely that desired
traffic was blocked, rather than undesired traffic allowed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/util outside of the virnet namespace.
Also, make a few virSocketAddr functions const-correct, for easier
conversions in future patches.
* src/util/virbuffer.h (virBufferError, virBufferUse)
(virBufferGetIndent): Use intended type.
* src/util/virmacaddr.h (virMacAddrCmp, virMacAddrCmpRaw)
(virMacAddrSet, virMcAddrFormat, virMacAddrIsUnicast)
(virMacAddrIsMulticast): Likewise.
* src/util/virebtables.h (ebtablesAddForwardAllowIn)
(ebtablesRemoveForwardAllowIn): Likewise.
* src/util/virsocketaddr.h (virSocketAddrSetIPv4Addr): Drop
incorrect const.
(virMacAddrGetRaw, virSocketAddrFormat, virSocketAddrFormatFull):
Make const-correct.
(virSocketAddrMask, virSocketAddrMaskByPrefix)
(virSocketAddrBroadcast, virSocketAddrBroadcastByPrefix)
(virSocketAddrGetNumNetmaskBits, virSocketAddrGetIpPrefix)
(virSocketAddrEqual, virSocketAddrIsPrivate)
(virSocketAddrIsWildcard): Use intended type.
* src/util/virbuffer.c (virBufferError, virBufferUse)
(virBufferGetIndent): Fix fallout.
* src/util/virmacaddr.c (virMacAddrCmp, virMacAddrCmpRaw)
(virMacAddrSet, virMcAddrFormat, virMacAddrIsUnicast)
(virMacAddrIsMulticast): Likewise.
* src/util/virebtables.c (ebtablesAddForwardAllowIn)
(ebtablesRemoveForwardAllowIn): Likewise.
* src/util/virsocketaddr.c (virSocketAddrMask, virMacAddrGetRaw)
(virSocketAddrMaskByPrefix, virSocketAddrBroadcast)
(virSocketAddrBroadcastByPrefix, virSocketAddrGetNumNetmaskBits)
(virSocketAddrGetIpPrefix, virSocketAddrEqual)
(virSocketAddrIsPrivate, virSocketAddrIsWildcard)
(virSocketAddrGetIPv4Addr, virSocketAddrGetIPv6Addr)
(virSocketAddrFormat, virSocketAddrFormatFull): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This function takes exactly one argument: an address to check.
It returns true, if the address is an IPv4 or IPv6 address in numeric
format, false otherwise (e.g. for "examplehost").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'in_addr_t' typedef is not present in Mingw64 headers.
Instead we can use the more portable 'struct in_addr' and
then access its 's_addr' field.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I noticed several unusual spacings in for loops, and decided to
fix them up. See the next commit for the syntax check that found
all of these.
* examples/domsuspend/suspend.c (main): Fix spacing.
* python/libvirt-override.c: Likewise.
* src/conf/interface_conf.c: Likewise.
* src/security/virt-aa-helper.c: Likewise.
* src/util/virconf.c: Likewise.
* src/util/virhook.c: Likewise.
* src/util/virlog.c: Likewise.
* src/util/virsocketaddr.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/viruuid.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* tools/virsh-domain-monitor.c (vshDomainStateToString): Drop
default case, to let compiler check us.
* tools/virsh-domain.c (vshDomainVcpuStateToString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Create the utility function virSocketAddrGetIpPrefix() to
determine the prefix for this network. The code in this
function was adapted from virNetworkIpDefPrefix().
Update virNetworkIpDefPrefix() in src/conf/network_conf.c
to use the new utility function.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
This new function returns true if the given address is in the range of
any "private" or "local" networks as defined in RFC1918 (IPv4) or
RFC3484/RFC4193 (IPv6), otherwise they return false.
These ranges are:
192.168.0.0/16
172.16.0.0/16
10.0.0.0/24
FC00::/7
FEC0::/10
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This removes nearly all the per-file error reporting macros
from the code in src/util/. A few custom macros remain for the
case, where the file needs to report errors with a variety of
different codes or parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add 2 new functions to the virSocketAddr 'class':
- virSocketAddrEqual: tests whether two IP addresses and their ports are equal
- virSocketaddSetIPv4Addr: set a virSocketAddr given a 32 bit int
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
