MacOS can not pre-load modules, so mock libraries must be built
as shared libraries (without asneeded striping, and undefined
symbols allowed).
Signed-off-by: Scott Shambarger <scott-libvirt@shambarger.net>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Assume commit 0466ff28f2 used case-insensitive replace s/OUT/EXP/
by mistake and this file is still licensed under GPLv2.0+
Undo the change.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
FIxes: 0466ff28f2
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Add support for the writeFiltering attribute in the domXML to native
config converter. Also include a test.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
When editing a domain with hotplug enabled, I removed the only
NUMA node it had and got no error. I got the error later though,
when starting the domain. This is not as user friendly as it can
be. Move the validation call out from command line generator and
into domain validator (which is called prior to starting cmd line
generation anyway).
When doing this, I had to remove memory-hotplug-nonuma xml2xml
test case because there is no way the test case can succeed,
obviously.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous patch handled the runtime case where a non-x86 host is
fetching /proc/cpuinfo data for a microcode info that we know
it doesn't exist. This change alone speeded everything by a
bit for non-x86, but there is at least one major culprit left.
qemuxml2argvtest does several arch-specific tests, and a good
chunk of them are x86 exclusive. This means that 'hostArch'
will be seen as x86 for these tests, even when running in
non-x86 hosts. In a Power 9 server with 128 CPUs, qemuxml2argvtest
takes 298 seconds to complete in average, and 'perf record'
indicates that 95% of the time is spent in
virHostCPUGetMicrocodeVersion().
This patch mocks virHostCPUGetMicrocodeVersion() to always return
0 in the tests, avoiding /proc/cpuinfo reads. This will make all
tests behave arch-agnostic, and the microcode value being 0 has no
impact on any existing test.
This is a CI speed across the board for all archs, including x86,
given that we're not reading /proc/cpuinfo in the tests. For
a Thinkpad T480 laptop with 8 Intel i7 CPUs, qemuxml2argvtest
went from 15.50 sec to 12.50 seconds. The performance gain is even
more noticeable for huge servers with lots of CPUs. For the
Power 9 server mentioned above, this patch speeds qemuxml2argvtest
to 9 seconds, down from 298 sec.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Some test rely too much on declaring variables in the middle
of the function. Use the macro to locally suppress the warning
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ScanTargets testing code declares some variables
in the middle of main.
Split it out into a separate function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support qemu commandline passthrough in the domXML to native config
converter. Add tests to check the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to map sound playback and recording devices to host devices
using "<audio type='oss'/>" OSS audio backend.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
bhyve supports intel hda sound devices that could be specified
on the command like using "-1:0,hda,play=$play_dev,rec=$rec_dev",
where "1:0" is a PCI address, and "$play_dev" and "$rec_dev"
point to the playback and recording device on the host respectively.
Currently, schema of the 'sound' element doesn't allow specifying
neither playback nor recording devices, so for now hardcode
/dev/dsp0, which is the first audio device on the host.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.
The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.
Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.
This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The machine types for this cycle were already added and qemu also added
a property for the machine type object called "default-ram-id".
Also "block-bitmap-mapping" is supported as a migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-v5.1.0 is released now. There weren't any noticable changes since
our last update to 'rc2'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that the migration parameters are formatted properly according to
the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When netdev-add was qapified it took us by surprise and we had to
scramble to fix the internals to format conformant monitor arguments.
Add a last-resort early warning system if this happens to object-add or
device_add. Hopefully qemu developers notify us sooner than this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We'll need to match that a certain part of the qemu schema hasn't grown
new properties unexpectedly. Add a helper which matches an 'object' QMP
schema entry against a template and reports errors if expected types
don't match or new entries are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There was a report on libvirt-users [1] about the domxml to/from
native converter in the Xen driver not handling PCI addresses
without a domain specification. This patch improves parsing of PCI
addresses in the converter and allows PCI addresses with only
bb:ss.f. xl.cfg(5) also allows either the dddd:bb:ss.f or bb:ss.f
format. A test has been added to check the conversion from xl.cfg
to domXML.
[1] https://www.redhat.com/archives/libvirt-users/2020-August/msg00040.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit bcbb026993 converted qemublocktest to use
g_autoptr for virQEMUCaps. To prevent it from crashing,
don't explicitly call virObjectUnref() on this object.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We need to modify check-file-access.py to be usable as wrapper for
libvirt tests. This way we can run the tests using this command:
meson test --setup access
which will run all tests using check-file-access.py as a wrapper.
With autotools all file access are written into single file for all
tests and compared once the whole test suite is done.
With Meson we will compare the file access after every single test
because it is used as wrapper now. That requires writing the file
access into separate files for every single test as they are executed
in parallel.
Since the wrapper is used for all tests in Meson including tests outside
of tests directory we have to check for presence of the output file.
We should also cleanup after ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With the old build system we just list the source files directly for
each test, but this would not work as expected with Meson.
For every binary there is a separate directory with its object files
which would mean all the utils sources would be compiled repeatedly
for every test using them.
Having static libraries ensures that the utils sources are compiled
only once.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Meson doesn't use .libs directory, everything is placed directly into
directories where meson.build file is used.
In order to have working tests and running libvirt directly from GIT we
need to fix all the paths pointing '.libs' directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Meson always defines _FILE_OFFSET_BITS=64 which effectively makes
mocking of non 64-bit stat functions dead code.
On linux it was not an issue because we use the 64-bit versions but
on FreeBSD there are not 64-bit versions, there is only stat & lstat.
We cannot simply drop the check as that would resolve to compilation
error on 64-bit linux:
{standard input}: Assembler messages:
{standard input}:11468: Error: symbol `__xstat64' is already defined
{standard input}:11679: Error: symbol `__xstat64.cold' is already defined
{standard input}:12034: Error: symbol `__lxstat64' is already defined
{standard input}:12245: Error: symbol `__lxstat64.cold' is already defined
So we have to replace the _FILE_OFFSET_BITS with a check if the
corresponding 64-bit version of the stat function exists.
Replicate the meson behavior by always defining _FILE_OFFSET_BITS
instead of using AC_SYS_LARGEFILE otherwise this change would break
our tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With meson we no longer have .libs directory with the actual binary so
we have to take a different approach to detect if running from build
directory.
This is not as robust as for autotools because if you select --prefix
in the build directory it will incorrectly enable the override as well
but nobody should do that.
We have to modify some of the tests to not add current build path into
PATH variable and use the full path for virsh instead. Otherwise it
would be impossible to figure out that we are running virsh from build
directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With autoconf this option controlled if the test suite is compiled by
default or not with the fact that it will be compiled later when
running `make check`.
With meson it is not possible to compile it later when running
`ninja test` as it will be always compiled if referenced by `test()`
function in meson.build files.
Since we cannot postpone compilation of the test suite drop this option
as it will not be converted to meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
One variable per line.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reduce the scope of some variables and mark them as
g_autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Except for a few cases where freeing it explicitly
seems to be done on purpose.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The 'checkoutput' function does have a parameter for a possible
prefix, but it is now unused.
Introduced-by: 241ac07124
Used-by: 62f263a73e
Unused-since: 2dfacbffea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Note that 'numa-mem-supported' turned off for certain machine types
which in turn forced us to generate a newer command line in certain
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU is going to drop 'vxhs' in the upcoming release so we'll need to
track these separately to prevent test suite breakage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already test with real caps so there's no real need for this special
case. While it technically tested the state without TLS encryption key
secrets, it doesn't really matter that much.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'commandhelper' checks effectively whether the parent process is
still around to report whether it was daemonized or not.
This creates a unlikely race condition in cases when we do actually
daemonize the process as the intermediate process used for the
daemonization might not have terminated yet which would report wrong
result leading to test failure.
For now there's just 'test4' which actually daemonizes the process.
Add an argument '--check-daemonize' which asks for retries of the
daemonization check in cases where we expect that the commandhelper is
going to be daemonized and use it in 'test4' to make the test more
reliable.
I've observed the test failure sporadically when my box is under load
e.g. while building two trees at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:
<features>
<cow state='yes|no'/>
</features>
If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When support for MAC addresses having a type='static|generated'
attribute was added in:
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
the VMX -> XML parser was not updated. As a result while we
accept the 'type' attribute on input, we never show it again
on 'output', so we loose information during the roundtrip.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the current formatter, the XML snippets:
<interface type='bridge'>
<mac address='00:0c:29:dd:ee:fe' type='static'/>
<source bridge='br1'/>
</interface>
<interface type='bridge'>
<mac address='aa:bb:cc:dd:ee:fd' type='generated'/>
<source bridge='br2'/>
</interface>
result in
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet1.checkMACAddress = "false"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "static"
ethernet2.address = "aa:bb:cc:dd:ee:fd"
ethernet2.checkMACAddress = "false"
which is flawed, as both type='static' and type='generated' in the XML
turn into 'static' in the VMX config.
The existence of the 'static' attribute is further overriding whether
the checkMACAddress config option is set as a side effect.
Both these pieces of flawed logic were introduced in
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
which intentionally added the 'checkMACAddress' side effect based on
the 'type' attribute.
With this change, we're reverting the handling of checkMACAddress
to match what existed historically. The 'type' attribute now directly
maps to the addressType attribute, so the above config becomes:
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "aa:bb:cc:dd:ee:fd"
ethernet2.generatedAddressOffset = "0"
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mingw header define time() as a static inline function and this
causes a duplicate definition build failure. Since we're not using the
LD_PRELOAD at all on Mingw, we ideally wouldn't compile any of the
mock libraries. Rather than change the build system now though, this
just stubs out the offending function.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'libvirt-tmp-activewrite' bitmap is added during the 'pivot'
operation of block copy and active layer block commit operations
regardless of whether there are any bitmaps to merge, but was not
removed unless a bitmap was merged. This meant that subsequent attempts
to merge into the same image would fail.
Fix it by checking whether the 'libvirt-tmp-activewrite' would be used
by the code and don't skip the code which would delete it.
This is a regression introduced when we switched to the new code for
block commit in <20a7abc2d2d> and for block copy in <7bfff40fdfe5>. The
actual bug originates from <4fa8654ece>.
https://bugzilla.redhat.com/show_bug.cgi?id=1857735
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
g_new() is used in only 3 places. Switching them to g_new0() will do
no harm, reduces confusion, and helps me sleep better at night knowing
that all allocated memory is initialized to 0 :-) (Yes, I *know* that
in all three cases the associated memory is immediately assigned some
other value. Today.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When upgrading from a libvirt which didn't format private data of a
virStorageSource representing an iSCSI hostdev source, we might need to
generate some internal data so that the code still works as if it was
present in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
