Detected by Coverity. If, for some reason, our text monitor input
does not match our assumptions, we end up incrementing p while it
is NULL, then dereferencing the pointer 0x1, which will fault.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetBlockStatsParamsNumber): Rewrite to avoid
deref of strchr failure. Fix indentation.
As this is needed. Although some functions check for domain
being active before obtaining job, we need to check it after,
because obtaining job unlocks domain object, during which
a state of domain can be changed.
This patch extends qemudDomainCoreDump so it supports new VIR_DUMP_RESET
flag. If this flag is set, domain is reset on successful dump. However,
this is needed to be done after we start CPUs.
With the recent refactoring of qemu snapshot relationships, it
is now trivial to filter on leaves.
* src/conf/domain_conf.c (virDomainSnapshotObjListCount)
(virDomainSnapshotObjListCopyNames): Handle new flag.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Pass new flag through.
VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.
Sample:
<filesystem type='mount'>
<driver type='handle'/>
<source dir='/folder/to/share1'/>
<target dir='mount_tag1'/>
</filesystem>
<filesystem type='mount'>
<driver type='path'/>
<source dir='/folder/to/share2'/>
<target dir='mount_tag2'/>
</filesystem>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous optimizations lead to some follow-on cleanups.
* src/conf/domain_conf.c (virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Drop dead parameter.
(virDomainSnapshotActOnDescendant)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): Update callers.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames, qemuDomainSnapshotDelete):
Likewise.
* src/conf/domain_conf.h: Update prototypes.
Maintain the parent/child relationships of all qemu snapshots.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Populate
relationships after loading.
(qemuDomainSnapshotCreateXML): Set relations on creation; tweak
redefinition to reuse existing object.
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Clear relations on delete.
To date, JSON disk snapshots worked by accident, as they were always
using hmp fallback due to a typo in commit e702b5b not picking up
on the (intentional) difference in command names between the two
monitor protocols.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Spell QMP command correctly.
Reported by Luiz Capitulino.
Not too hard to wire up. The trickiest part is realizing that
listing children of a snapshot cannot use SNAPSHOT_LIST_ROOTS,
and that we overloaded that bit to also mean SNAPSHOT_LIST_DESCENDANTS;
we use that bit to decide which iteration to use, but don't want
the existing counting/listing functions to see that bit.
* src/conf/domain_conf.h (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New prototypes.
* src/conf/domain_conf.c (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New functions.
* src/libvirt_private.syms (domain_conf.h): Export them.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames): New functions.
If parsing qemu command line fails (e.g. because of non-existing
process number supplied), we jump to cleanup label where we free
pidfile. Therefore it needs to be initialized. Otherwise we free
random pointer.
Coverity complained that 4 out of 5 callers to virJSONValueObjectGetBoolean
checked for errors. But we documented that we don't care in this case.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockInfo): Use
ignore_value.
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.
This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).
For consistency, the value "report" has been added to the possible
values for error_policy as well.
commit 12062ab set rerror=ignore when error_policy="enospace" was
selected (since the rerror option in qemu doesn't accept "enospc", as
the werror option does).
After that patch was already pushed, Paolo Bonzini noticed it and
commented that leaving rerror at the default ("report") would be a
better choice. This patch corrects the problem - if error_policy =
"enospace" is given, rerror is left off the qemu commandline,
effectively setting it to "report". For other values, rerror is still
set to match werror.
Additionally, the parsing of error_policy was changed to no longer
erroneously allow "default" as a choice - as with most other
attributes, if you want the default setting, just don't specify an
error_policy.
Finally, two ommissions in the first patch were corrected - a
long-dormant qemuxml2argv test for enospace was enabled, and fixed to
pass, and the argv2xml parser in qemu_command.c was updated to
recognize the different spelling on the qemu commandline.
Now that RHEL 6.2 Beta is out, it would be nice to test multifunction
devices on that platform. This changes things so that the multifunction
cap bit can be set in two different ways: by version comparison (needed
for qemu 0.13 which lacked a -device query), and by -device query
(provided by qemu.git and backported to the RHEL beta build of
qemu-kvm which still claims to be a modified 0.12, and therefore needed
for RHEL).
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Allow
second method of setting multifunction cap bit.
* tests/qemuhelptest.c (mymain): Test it.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device: Likewise.
Implements the documentation for snapshot revert vs. force.
Part of the patch tightens existing behavior (previously, reverting
to an old snapshot without <domain> was blindly attempted, now it
requires force), while part of it relaxes behavior (previously, it
was not possible to revert an active domain to an ABI-incompatible
active snapshot, now force allows this transition).
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Check for
risky situations, and allow force to get past them.
Once we know which set of disks belong to a snapshot, reverting or
deleting that snapshot should visit just those disks, rather than
also visiting disks that were hot-plugged in the meantime or
skipping disks that were hot-unplugged in the meantime.
* src/qemu/qemu_domain.c (qemuDomainSnapshotForEachQcow2): Use
snapshot domain details when available. Avoid NULL deref.
Qemu driver tries to update balloon data in virDomainGetInfo and if it
can't do so because there is another monitor job running, it just
reports what's known in domain def. However, if there was no job running
but getting the data from qemu fails, we would fail the whole API. This
doesn't make sense. Let's make the failure nonfatal.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=730909
When support for setting the qemu disk error policy to "enospc" was
added, it was inadvertently spelled "enospace". This patch corrects
that on the qemu commandline (while retaining the "enospace" spelling
for libvirt's XML).
Also, while examining the qemu source, I found that "enospc" is not
allowed for the read error policy, only for write error policy (makes
sense). Since libvirt currently only has a single error policy
setting, when "enospace" is selected, the read error policy is set to
"ignore".
Destination libvirtd remembers the original name in the prepare phase
and clears it in the finish phase. The original name is used when
comparing domain name in migration cookie.
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see
https://bugzilla.redhat.com/show_bug.cgi?id=728174
and the discussion before and after
https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html
This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04' function='0x0' multifunction='on'/>
In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.
With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.
A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
Currently, qemuDomainGetXMLDesc and qemudDomainGetInfo check for
outstanding synchronous job before (eventual) monitor entering.
However, there can be already async job set, e.g. migration.
If the daemon is restarted so we reconnect to monitor, cdrom media
can be ejected. In that case we don't want to show it in domain xml,
or require it on migration destination.
To check for disk status use 'info block' monitor command.
* src/qemu/qemu_migration.c: if 'vmdef' is NULL, the function
virDomainSaveConfig still dereferences it, it doesn't make
sense, so should add return value check to make sure 'vmdef'
is non-NULL before calling virDomainSaveConfig, in addition,
in order to debug later, also should record error information
into log.
Signed-off-by: Alex Jia <ajia@redhat.com>
First hypervisor implementation of the new API.
Allows 'virsh snapshot-list --tree' to be more efficient.
* src/qemu/qemu_driver.c (qemuDomainSnapshotGetParent): New
function.
If a domain started with -no-shutdown shuts down while libvirtd is not
running, it will be seen as paused when libvirtd reconnects to it. Use
the paused reason to detect if a domain was stopped because of shutdown
and finish the process just as if a SHUTDOWN event is delivered from
qemu.
This patch was made in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=738095
In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).
rombar is forced on/off by adding:
<rom bar='on|off'/>
inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.
At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.
SIGTERM handling for -no-shutdown is already fixed in qemu git and
libvirt can safely use it. The downside is that 0.15.50 version of qemu
can be any qemu compiled from git, even that without the fix for
SIGTERM. However, I think this patch is worth it since excluding 0.15.50
from the check makes testing current qemu with libvirt much easier and
someone running qemu from git should be able to rebuild fixed qemu from
git if they hit the problem with a hang on shutdown.
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
as even if $prefix_CACHE_V2 is set, we can't know if unsafe
is supported.
* Improved the reliability of qemu cache type detection.
If a domain has inactive XML we want to transfer it to destination
when migrating with VIR_MIGRATE_PERSIST_DEST. In order to harm
the migration protocol as least as possible, a optional cookie was
chosen.
The previous patch removed all snapshots, but not the directory
where the snapshots lived, which is still a form of stale data.
* src/qemu/qemu_domain.c (qemuDomainRemoveInactive): Wipe any
snapshot directory.
Commit 282fe1f0 documented that transient domains will auto-delete
any snapshot metadata when the last reference to the domain is
removed, and that management apps are in charge of grabbing any
snapshot metadata prior to that point. However, this was not
actually implemented for qemu until now.
* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainDestroyFlags, qemuDomainSaveInternal)
(qemudDomainCoreDump, qemuDomainRestoreFlags, qemudDomainDefine)
(qemuDomainUndefineFlags, qemuDomainMigrateConfirm3)
(qemuDomainRevertToSnapshot): Clean up snapshot metadata.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny)
(qemuMigrationPerformJob, qemuMigrationPerformPhase)
(qemuMigrationFinish): Likewise.
* src/qemu/qemu_process.c (qemuProcessHandleMonitorEOF)
(qemuProcessReconnect, qemuProcessReconnectHelper)
(qemuProcessAutoDestroyDom): Likewise.
This patch is mostly code motion - moving some functions out
of qemu_driver and into qemu_domain so they can be reused by
multiple qemu_* files (since qemu_driver.h must not grow).
It also adds a new helper function, qemuDomainRemoveInactive,
which will be used in the next patch.
* src/qemu/qemu_domain.h (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll)
(qemuDomainRemoveInactive): New prototypes.
(struct qemu_snap_remove): New struct.
* src/qemu/qemu_domain.c (qemuDomainRemoveInactive)
(qemuDomainSnapshotDiscardAllMetadata): New functions.
(qemuFindQemuImgBinary, qemuDomainSnapshotWriteMetadata)
(qemuDomainSnapshotForEachQcow2, qemuDomainSnapshotDiscard)
(qemuDomainSnapshotDiscardAll): Move here...
* src/qemu/qemu_driver.c (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll): ...from
here.
(qemuDomainUndefineFlags): Update caller.
* src/conf/domain_conf.c (virDomainRemoveInactive): Doc fixes.
Commit 19f8c98 introduced VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA,
with the intent that omitting the flag makes undefine fail, and
including the flag deletes metadata. But it used the wrong logic.
Also, hoist the transient domain sooner, so that we don't
accidentally remove metadata of a transient domain.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Check correct
flag value.
* src/qemu/qemu_process.c: Taking if (qemuDomainObjEndJob(driver, obj) == 0)
true branch then 'obj' is NULL, virDomainObjIsActive(obj) and
virDomainObjUnref(obj) will dereference NULL pointer.
Signed-off-by: Alex Jia <ajia@redhat.com>
Once virDomainReboot is called for a domain, guest OS initiated shutdown
would always result in reboot instead of shutdown. Only
virDomainShutdown would actually shutd such domain down. That's because
we forgot to reset fakeReboot flag once we asked the domain to reboot.
The commit that prevents disk corruption on domain shutdown
(96fc478417) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.
This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".
gcc warns when building libvirt 0.9.5 on a 32-bit machine:
qemu/qemu_migration.c: In function 'qemuMigrationToFile':
qemu/qemu_migration.c:2727:38: error: large integer implicitly truncated to unsigned type [-Woverflow]
* src/qemu/qemu_domain.h (QEMU_DOMAIN_FILE_MIG_BANDWIDTH_MAX): Cap
to long when building for 32-bit platform.
Virsh man page lists driver types to be used with attach-device
command, but does not specify that those are usable only with the XEN
Hypervisor.
This patch adds statement, that those options specified are applicable
only on the Xen hypervisor and adds option usable with qemu emulator.
This patch also changes type of error returned by QEMU driver if the
user specifies incompatible driver type from VIR_ERR_INTERNAL_ERROR to
VIR_ERR_CONFIG_UNSUPPORTED.
For all types of disks other than qcow2, we were requesting that
SELinux labeling visit the new file as if it were qcow2, which
means labeling would try to find the backing files of an empty file.
And for a pre-existing qcow2 disk, we were passing NULL, which meant
that labelling tried to probe the file type (and if probing is
disabled, per the default qemu.conf, this made snapshots fail).
What we really want is to make SELinux labeling visit the new
file as raw; it will later be converted to qcow2 if qemu successfully
made the snapshot.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Force SELinux labeling
to avoid probe of new file.
For external snapshots to be useful on persistent domains, we must
alter the persistent definition alongside the running definition.
Thanks to the possibility of disk hotplug as well as of edits that
only affect the persistent xml, we can't assume that vm->def and
vm->newDef have the same disk at the same index, so we can only
update the persistent copy if the device destination matches up.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Also affect newDef, if
present.
Qemu sends STOP event as part of the shutdown process. Detect such STOP
event and consider shutdown to be reason of emitting such event. That's
the best we can do until qemu provides us the reason directly in STOP
event. This allows us to report shutdown reason for paused state so that
apps can detect domains that failed to finish the shutdown process
(e.g., because qemu is buggy and doesn't exit on SIGTERM or it is
blocked in flushing disk buffers).
