This way later patches can add another structures with virResctrl
prefix without the meaning being even more confusing than it needs to
be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That means that returning negative values means error and non-negative
values differ in meaning, but are all successful.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It doesn't access anything from conf/ and ti will be needed to use
from other util/ places. This split makes the separation clearer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 81fb440b further qualified an if statement by adding the
boolean saveVlan to the condition. Coverity pointed out that this
change in the logic eliminated the need to check saveVlan in an
argument to virAsprintf().
Commit 9a94af6d restructured virHostdevReadNetConfig() so that it
would manually set ret = 0 after successfully reading the device's
config, but Coverity pointed out that "ret = 0" was erroneously placed
outside of an "else" clause, meaning that the the value of ret set in
the "if" clause was unnecessarily and incorrectly overwritten.
This patch moves ret = 0 into the else clause, which should silence
Coverity.
When using a VF from an SRIOV-capable network card in a guest (either
in macvtap passthrough mode, or via VFIO PCI device assignment), The
associated PF netdev must be online in order for the VF to be usable
by the guest. The guest, however, is not able to change the state of
the PF. And libvirt *could* set the PF online as needed, but that
could lead to the host receiving unexpected IPv6 traffic (since the
default for an unconfigured interface is to participate in IPv6
autoconf). For this reason, before assigning a VF to a guest, libvirt
verifies that the related PF netdev is online - if it isn't, then we
log an error and don't allow the guest startup to continue.
Until now, this check was done during virNetDevSetNetConfig(). This
works nicely because the same function is called both for macvtap
passthrough and for VFIO device assignment. But in the case of VFIO,
the VF has already been unbound from its netdev driver by the time we
get to virNetDevSetNetConfig(), and in the case of dual port Mellanox
NICs that have their VFs setup in single port mode, the *only* way to
determine the proper PF netdev to query for online status is via the
"phys_port_id" file that is in the VF netdev's sysfs directory. *BUT*
if we've unbound the VF from the netdev driver, then it doesn't *have*
a netdev sysfs directory.
So, in order to check the correct PF netdev for online status, this
patch moved the check earlier in the setup, into
virNetDevSaveNetConfig(), which is called *before* unbinding the VF
from its netdev driver.
(Note that this implies that if you are using VFIO device assignment
for the VFs of a Mellanox NIC that has the VFs programmed in single
port mode, you must let the VFs be bound to their net driver and use
"managed='yes'" in the device definition. To be more specific, this is
only true if the VFs in single port mode are using port *2* of the PF
- if the VFs are using only port 1, then the correct PF netdev will be
arrived at by default/chance))
This resolves: https://bugzilla.redhat.com/267191
virHostdevRestoreNetConfig() calls virNetDevReadNetConfig() to try and
read the "original config" of a netdev, and if that fails, it tries
again with a different directory/netdev name. This achieves the
desired effect (we end up finding the config wherever it may be), but
for each failure, virNetDevReadNetConfig() places a nice error message
in the system logs. Experience has shown that false-positive error
logs like this lead to erroneous bug reports, and can often mislead
those searching for *real* bugs.
This patch changes virNetDevReadNetConfig() to explicitly check if the
file exists before calling virFileReadAll(); if it doesn't exist,
virNetDevReadNetConfig() returns a success, but leaves all the
variables holding the results as NULL. (This makes sense if you define
the purpose of the function as "read a netdev's config from its config
file *if that file exists*).
To take advantage of that change, the caller,
virHostdevRestoreNetConfig() is modified to fail immediately if
virNetDevReadNetConfig() returns an error, and otherwise to try the
different directory/netdev name if adminMAC & vlan & MAC are all NULL
after the preceding attempt.
Mellanox ConnectX-3 dual port SRIOV NICs present a bit of a challenge
when assigning one of their VFs to a guest using VFIO device
assignment.
These NICs have only a single PCI PF device, and that single PF has
two netdevs sharing the single PCI address - one for port 1 and one
for port 2. When a VF is created it can also have 2 netdevs, or it can
be setup in "single port" mode, where the VF has only a single netdev,
and that netdev is connected either to port 1 or to port 2.
When the VF is created in dual port mode, you get/set the MAC
address/vlan tag for the port 1 VF by sending a netlink message to the
PF's port1 netdev, and you get/set the MAC address/vlan tag for the
port 2 VF by sending a netlink message to the PF's port 2 netdev. (Of
course libvirt doesn't have any way to describe MAC/vlan info for 2
ports in a single hostdev interface, so that's a bit of a moot point)
When the VF is created in single port mode, you can *set* the MAC/vlan
info by sending a netlink message to *either* PF netdev - the driver
is smart enough to understand that there's only a single netdev, and
set the MAC/vlan for that netdev. When you want to *get* it, however,
the driver is more accurate - it will return 00:00:00:00:00:00 for the
MAC if you request it from the port 1 PF netdev when the VF was
configured to be single port on port 2, or if you request if from the
port 2 PF netdev when the VF was configured to be single port on port
1.
Based on this information, when *getting* the MAC/vlan info (to save
the original setting prior to assignment), we determine the correct PF
netdev by matching phys_port_id between VF and PF.
(IMPORTANT NOTE: this implies that to do PCI device assignment of the
VFs on dual port Mellanox cards using <interface type='hostdev'>
(i.e. if you want the MAC address/vlan tag to be set), not only must
the VFs be configured in single port mode, but also the VFs *must* be
bound to the host VF net driver, and libvirt must use managed='yes')
By the time libvirt is ready to set the new MAC/vlan tag, the VF has
already been unbound from the host net driver and bound to
vfio-pci. This isn't problematic though because, as stated earlier,
when a VF is created in single port mode, commands to configure it can
be sent to either the port 1 PF netdev or the port 2 PF netdev.
When it is time to restore the original MAC/vlan tag, again the VF
will *not* be bound to a host net driver, so it won't be possible to
learn from sysfs whether to use the port 1 or port 2 PF netdev for the
netlink commands. And again, it doesn't matter which netdev you
use. However, we must keep in mind that we saved the original settings
to a file called "${PF}_${VFNUM}". To solve this problem, we just
check for the existence of ${PF1}_${VFNUM} and ${PF2}_${VFNUM}, and
use whichever one we find (since we know that only one can be there)
This patch updates functions in netdev.c to pay attention to
phys_port_id. It uses the new function virNetDevGetPhysPortID() to
learn the phys_port_id of a VF or PF, then sends that info to
virPCIGetNetName(), which has newly been modified to take an optional
phys_port_id.
A single PCI device may have multiple netdevs associated with it. Each
of those netdevs will have a different phys_port_id entry in
sysfs. This patch modifies virPCIGetNetName() to allow selecting one
of the potential many netdevs in two different ways:
1) by setting the "idx" argument, the caller can select the 1st (0),
2nd (1), etc. netdev from the PCI device's net subdirectory.
2) If the physPortID arg is set (to a null-terminated string) then
virPCIGetNetName() returns the netdev that has that phys_port_id in
the sysfs file of the same name in the netdev's directory.
On Linux each network device *can* (but not necessarily *does*) have
an attribute called phys_port_id which can be read from the file of
that name in the netdev's sysfs directory. The examples I've seen have
been a many-digit hexadecimal number (as an ASCII string).
This value can be useful when a single PCI device is associated with
multiple netdevs (e.g a dual port Mellanox SR-IOV NIC - this card has
a single PCI Physical Function (PF), and that PF has two netdevs
associated with it (the "net" subdirectory of the PF in sysfs has two
links rather than the usual single link to a netdev directory). Each
of the PF netdevs has a different phys_port_id. The Virtual Functions
(VF) are similar - the PF (a PCI device) has "n" VFs (also each of
these is a PCI device), each VF has two netdevs, and each of the VF
netdevs points back to the VF PCI device (with the "device" entry in
its sysfs directory) as well as having a phys_port_id matching the PF
netdev it is associated with.
virNetDevGetPhysPortID() simply attempts to read the phys_port_id for
the given netdev and return it to the caller. If this particular
netdev driver doesn't support phys_port_id, it returns NULL (*not* a
NULL-terminated string, but a NULL pointer) but still counts it as a
success.
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In virDomainNetDefParseXML() the def->coalesce is parsed and
allocated by virDomainNetDefCoalesceParseXML() but in fact it's
never freed .
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1467245
Currently, there's a bug when undefining a domain with NVRAM
store. Basically, the unlink() of the NVRAM store file happens
during the undefine procedure iff domain is inactive. So, if
domain is running and undefine is called the file is left behind.
It won't be removed in the domain cleanup process either
(qemuProcessStop). One of the solutions is to remove if
regardless of the domain state and rely on qemu having the file
opened. This still has a downside that if the domain is defined
back the NVRAM store file is going to be new, any changes to the
current one are lost (just like with any other file that is
deleted while a process has it opened). But is it really a
downside?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Slight refactor of the WMI serialization code to minimize mixing
openwsman and libxml2 APIs that triggered clang alignment warnings.
The only usage of libxml2 APIs now is in creating CDATA blocks,
because the openwsman API does not provide that functionality. The
clang alignment warning in this case is silenced by casting to a
void pointer first.
The API docs for the various vir$OBJECTGetConnect functions
contain a warning
WARNING: When writing libvirt bindings in other languages, do
not use this function. Instead, store the connection and
the domain object together.
There is no reason why language bindings should not use this
method, and indeed the Perl, Python, and Go bindings all use
these methods.
This warning was originally added back in
commit 3edb4bc9fb
Author: Daniel Veillard <veillard@redhat.com>
Date: Tue Jul 24 15:32:55 2007 +0000
* libvirt.spec.in NEWS docs/* po/*: preparing release 0.3.1
* src/libvirt.c python/generator.py: some cleanup and warnings
from Richard W.M. Jones
IIUC, the rational was that these APIs do not need to be
directly exposed to the non-C language, as the language
can expose the same concept itself by storing the original
virConnectPtr object alongside the virDomainPtr. There's
no reason to mandate such an approach though - it is valid
for languages to expose this directly if that suits their
needs better.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We're storing the machine name in @priv but free it just in
qemuProcessStop, Therefore this may leak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing boot options from domain XML in
virDomainDefParseBootOptions() initenv id stored to:
def->os.initenv[i]->name
def->os.initenv[i]->value
But these are never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds support for automatic VNC port assignment for bhyve guests.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most other top level objects have already had their limits increased
to 16384. Increase the storage pool, nwfilter & snapshot object
limits to match. For snapshots at least, we have seen hosts which
exceeded the current limit
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code only currently handles writing an x86 default -cpu
argument, and doesn't know anything about other architectures.
Let's make this explicit rather than leaving ex. qemu ppc64 to
throw an error about -cpu qemu64
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Certain XML features that aren't in the <cpu> block map to -cpu
flags on the qemu cli. If one of these is specified but the user
didn't explicitly pass an XML <cpu> model, we need to format a
default model on the command line.
The current code handles this by sprinkling this default cpu handling
among all the different flag string formatting. Instead, switch it
to do this just once.
This alters some test output slightly: the previous code would
write the default -cpu in some cases when no flags were actually
added, so the output was redundant.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
My commit 0c1d863 broke formatting of passthrough smartcard devices:
<smartcard mode='passthrough' type='spicevmc'/>
resulted in invalid XML:
<smartcard mode='passthrough'>
type='spicevmc'>
<address type='ccid' controller='0' slot='0'/>
</smartcard>
Split out chardev source formatting function into two -
one formatting the attributes and other formatting the subelements.
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Disk serial schema has extra '.+' allowed characters in comparison
with check in code. Looks like there is no reason for that as qemu
allows any character AFAIK for serial. This discrepancy is originated
in commit id '85d15b51' where the ability to add serial was added.
Alter the disk-serial test to add a disk with all the possible
characters listed as the serial value.
https://bugzilla.redhat.com/show_bug.cgi?id=1458630
Introduce virQEMUDriverConfigTLSDirResetDefaults in order to check
if the defaultTLSx509certdir was changed, then change the default
for any other *TLSx509certdir that was not set to the default default.
Introduce virQEMUDriverConfigValidate to validate the existence of
any of the *_tls_x509_cert_dir values that were uncommented/set,
incuding the default.
Update the qemu.conf description for default to describe the consequences
if the default directory path does not exist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
After an OOM error, virBuffer* APIs set buf->use to zero.
Adding a buffer to the parent buffer only if use is non-zero
would quietly drop data on error.
Check the error beforehand to make sure buf->use is zero
because we have not attempted to add anything to it.
Convert virDomainSmartcardDefFormat to use a separate buffer
for possible subelements, to avoid the need for duplicated
formatting logic in virDomainDeviceInfoNeedsFormat.
This function has grown to format more than just the address.
Delete the comment completely to avoid failing to update it
in the future.
Also, the indentation is now handled by the virBuffer APIs,
so the comment about indentation no longer makes sense.
This function returns false if virDomainDeviceInfoFormat
would not format anything.
Using it as the sole condition to decide whether to call
virDomainDeviceInfoFormat or not is pointless, since
the conditions are repeated in virDomainDeviceInfoFormat.
Not every platform is guaranteed to have dlopen/dlsym, so we should
conditionalize its use. Suprisingly it is actually present for Win32
via the mingw-dlfcn add on, but we should still conditionalize it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These functions were made exportable back in 3aa3e072 when I was
splitting network code into parsing and list management parts.
Since then the split is finished now and these two functions do
not need to be exported anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This member allows us to store a pointer to some private data.
However, the comment says it's used in both domain driver and
network driver. Well, it is not. It's just one pointer and domain
driver uses it directly. Network driver has a global driver
variable. Update the comment to not confuse others.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the introduction of shmem, there was a split of preparation code
from the formatting code from qemuBuildCommandLine() into
qemuProcessPrepareDomain(). Let's fix shmem in this regard, so that
we can slowly get to a cleaner codebase.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So there are couple of issues here. Firstly, we never unref the
@pendingReply and thus it leaks.
==13279== 144 (72 direct, 72 indirect) bytes in 1 blocks are definitely lost in loss record 1,095 of 1,259
==13279== at 0x4C2E080: calloc (vg_replace_malloc.c:711)
==13279== by 0x781FA97: _dbus_pending_call_new_unlocked (in /usr/lib64/libdbus-1.so.3.14.11)
==13279== by 0x7812A4C: dbus_connection_send_with_reply (in /usr/lib64/libdbus-1.so.3.14.11)
==13279== by 0x56BEDF3: virNetDaemonCallInhibit (virnetdaemon.c:514)
==13279== by 0x56BEF18: virNetDaemonAddShutdownInhibition (virnetdaemon.c:536)
==13279== by 0x12473B: daemonInhibitCallback (libvirtd.c:742)
==13279== by 0x1249BD: daemonRunStateInit (libvirtd.c:823)
==13279== by 0x554FBCF: virThreadHelper (virthread.c:206)
==13279== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
==13279== by 0x928DE3C: clone (in /lib64/libc-2.23.so)
Secondly, while we send the message, we are suspended ('cos we're
talking to a UNIX socket). However, until we are resumed back
again the reply might have came therefore subsequent
dbus_pending_call_set_notify() has no effect and in fact the
virNetDaemonGotInhibitReply() callback is never called. Thirdly,
the dbus_connection_send_with_reply() has really stupid policy
for return values. To cite the man page:
Returns
FALSE if no memory, TRUE otherwise.
Yes, that's right. If anything goes wrong and it's not case of
OOM then TRUE is returned, i.e. you're trying to pass FDs and
it's not supported, or you're not connected, or anything else.
Therefore, checking for return value of
dbus_connection_send_with_reply() is not enoguh. We also have to
check if @pendingReply is not NULL before proceeding any further.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We are given a string in @machinename, we never allocate it, just
merely use it for reading. We should not free it otherwise it
leads to double free:
==32191== Thread 17:
==32191== Invalid free() / delete / delete[] / realloc()
==32191== at 0x4C2D1A0: free (vg_replace_malloc.c:530)
==32191== by 0x54BBB84: virFree (viralloc.c:582)
==32191== by 0x2BC04499: qemuProcessStop (qemu_process.c:6313)
==32191== by 0x2BC500FF: processMonitorEOFEvent (qemu_driver.c:4724)
==32191== by 0x2BC502FC: qemuProcessEventHandler (qemu_driver.c:4769)
==32191== by 0x5550640: virThreadPoolWorker (virthreadpool.c:167)
==32191== by 0x554FBCF: virThreadHelper (virthread.c:206)
==32191== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
==32191== by 0x928DE3C: clone (in /lib64/libc-2.23.so)
==32191== Address 0x31893d70 is 0 bytes inside a block of size 1,100 free'd
==32191== at 0x4C2D1A0: free (vg_replace_malloc.c:530)
==32191== by 0x54BBB84: virFree (viralloc.c:582)
==32191== by 0x54C1936: virCgroupValidateMachineGroup (vircgroup.c:343)
==32191== by 0x54C4B29: virCgroupNewDetectMachine (vircgroup.c:1550)
==32191== by 0x2BBDDA29: qemuConnectCgroup (qemu_cgroup.c:972)
==32191== by 0x2BC05DA7: qemuProcessReconnect (qemu_process.c:6822)
==32191== by 0x554FBCF: virThreadHelper (virthread.c:206)
==32191== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
==32191== by 0x928DE3C: clone (in /lib64/libc-2.23.so)
==32191== Block was alloc'd at
==32191== at 0x4C2BE80: malloc (vg_replace_malloc.c:298)
==32191== by 0x4C2E35F: realloc (vg_replace_malloc.c:785)
==32191== by 0x54BB492: virReallocN (viralloc.c:245)
==32191== by 0x54BEDF2: virBufferGrow (virbuffer.c:150)
==32191== by 0x54BF3B9: virBufferVasprintf (virbuffer.c:408)
==32191== by 0x54BF324: virBufferAsprintf (virbuffer.c:381)
==32191== by 0x55BB271: virDomainGenerateMachineName (domain_conf.c:27078)
==32191== by 0x2BBD5B8F: qemuDomainGetMachineName (qemu_domain.c:9595)
==32191== by 0x2BBDD9B4: qemuConnectCgroup (qemu_cgroup.c:966)
==32191== by 0x2BC05DA7: qemuProcessReconnect (qemu_process.c:6822)
==32191== by 0x554FBCF: virThreadHelper (virthread.c:206)
==32191== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
Moreover, make the @machinename 'const char *' to mark it
explicitly that we are not changing the passed string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit @4cb719b2dc moved the driver locks around since these have become
unnecessary at spots where the code handles now self-lockable object
list, but missed the possible double unlock if udevEnumerateDevices
fails, because at that point the driver lock had been already dropped.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In commit 5e515b542d I've attempted to fix the inability to access
storage from the apparmor helper program by linking with the storage
driver. By linking with the .so the linker complains that it's not
portable. Fix this by loading the module dynamically as we are supposed
to do.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
If a domain name contains a '=' and the unix socket path is
auto-generated or socket path provided by user contains '=' QEMU
is unable to properly parse the command line. In order to make it
work we need to use the new command line syntax for VNC if it's
available, otherwise we can use the old syntax.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1352529
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove the complex and unreliable code which inferred the node name
hierarchy only from data returned by 'query-named-block-nodes'. It turns
out that query-blockstats contain the full hierarchy of nodes as
perceived by qemu so the inference code is not necessary.
In query blockstats, the 'parent' object corresponds to the storage
behind a storage volume and 'backing' corresponds to the lower level of
backing chain. Since all have node names this data can be really easily
used to detect node names.
In addition to the code refactoring the one remaining test case needed
to be fixed along.
Reviewed-by: Eric Blake <eblake@redhat.com>
The same operation will become useful in other places so rename the
function to be more generic and move it to the top so that it can be
reused earlier in the file.
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow getting the raw data from query-blockstats, so that we can use it
to detect the backing chain later on.
Reviewed-by: Eric Blake <eblake@redhat.com>
Disallow providing the wwnn/wwpn of the HBA in the adapter XML:
<adapter type='fc_host' [parent='scsi_hostN'] wwnn='HBA_wwnn'
wwpn='HBA_wwpn'/>
This should be considered a configuration error since a vHBA
would not be created. In order to use the HBA as the backing the
following XML should be used:
<adapter type='scsi_host' name='scsi_hostN'/>
So add a check prior to the checkParent call to validate that
the provided wwnn/wwpn resolves to a vHBA and not an HBA.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since commit 2e6ecba1bc, the pointer to the qemu driver is saved in
domain object's private data and hence does not have to be passed as
yet another parameter if domain object is already one of them.
This is a first (example) patch of this kind of clean up, others will
hopefully follow.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The switch contains considerable amount of changes:
virQEMUCapsRememberCached() is removed because this is now handled
by virFileCacheSave().
virQEMUCapsInitCached() is removed because this is now handled by
virFileCacheLoad().
virQEMUCapsNewForBinary() is split into two functions,
virQEMUCapsNewData() which creates new data if there is nothing
cached and virQEMUCapsLoadFile() which loads the cached data.
This is now handled by virFileCacheNewData().
virQEMUCapsCacheValidate() is removed because this is now handled by
virFileCacheValidate().
virQEMUCapsCacheFree() is removed because it's no longer required.
Add virCapsPtr into virQEMUCapsCachePriv because for each call of
virFileCacheLookup*() we need to use current virCapsPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This will store private data that will be used by following patches
when switching to virFileCache.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The new virFileCache will nicely handle the caching logic for any data
that we would like to cache. For each type of data we will just need
to implement few handlers that will take care of creating, validating,
loading and saving the cached data.
The cached data must be an instance of virObject.
Currently we cache QEMU capabilities which will start using
virFileCache.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It's possible to have more than one unnamed virtio-serial unix channel.
We need to generate a unique name for each channel. Currently, we use
".../unknown.sock" for all of them. Better practice would be to specify
an explicit target path name; however, in the absence of that, we need
uniqueness in the names we generate internally.
Before the changes we'd get /var/lib/libvirt/qemu/channel/target/unknown.sock
for each instance of
<channel type='unix'>
<source mode='bind'/>
<target type='virtio'/>
</channel>
Now, we get vioser-00-00-01.sock, vioser-00-00-02.sock, etc.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
It is more related to a domain as we might use it even when there is
no systemd and it does not use any dbus/systemd functions. In order
not to use code from conf/ in util/ pass machineName in cgroups code
as a parameter. That also fixes a leak of machineName in the lxc
driver and cleans up and de-duplicates some code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This way the function can work as a central point of clean-up code and
we don't have to duplicate code. And it works similarly to the qemu
driver.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rather than rely on virSecretObjEndAPI to make the final virObjectUnref
after the call to virSecretObjListRemove, be more explicit by calling
virObjectUnref and setting @obj to NULL for secretUndefine and in
the error path of secretDefineXML. Calling EndAPI will end up calling
Unlock on an already unlocked object which has indeteriminate results
(usually an ignored error).
The virSecretObjEndAPI will both Unref and Unlock the object; however,
the virSecretObjListRemove would have already Unlock'd the object so
calling Unlock again is incorrect. Once the virSecretObjListRemove
is called all that's left is to Unref our interest since that's the
corrollary to the virSecretObjListAdd which returned our ref interest
plus references for each hash table in which the object resides. In math
terms, after an Add there's 2 refs on the object (1 for the object and
1 for the list). After calling Remove there's just 1 ref on the object.
For the Add callers, calling EndAPI removes the ref for the object and
unlocks it, but since it's in a list the other 1 remains.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virSecretLoadValue fails, the code jumped to cleanup without
setting @ret = obj, thus calling virSecretObjListRemove which only
accounts for the object reference related to adding the object to
the list during virSecretObjListAdd, but does not account for the
reference to the object itself as the return of @ret would be NULL
so the caller wouldn't call virSecretObjEndAPI on the object recently
added thus reducing the refcnt to zero.
This patch will perform the ObjListRemove in the failure path of
virSecretLoadValue and Unref @obj in order to perform clean up
and return @obj as NULL. The @def will be freed as part of the
virObjectUnref.
Since the virSecretObjListAdd technically consumes @def on success,
the secretDefineXML should set @def = NULL immediately and process
the remaining calls using a new @objDef variable. We can use use
VIR_STEAL_PTR since we know the Add function just stores @def in
obj->def.
Because we steal @def into @objDef, if we jump to restore_backup:
and @backup is set, then we need to ensure the @def would be
free'd properly, so we'll steal it back from @objDef. For the other
condition this fixes a double free of @def if the code had jumped to
@backup == NULL thus calling virSecretObjListRemove without setting
@def = NULL. In this case, the subsequent call to DefFree would
succeed and free @def; however, the call to EndAPI would also
call DefFree because the Unref done would be the last one for
the @obj meaning the obj->def would be used to call DefFree,
but it's already been free'd because @def wasn't managed right
within this error path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than assign to a local variable, let's just assign directly to the
object using the error path for cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit 328bd24443.
As it turns out, this is not portable and very Linux & glibc
specific. Worse, this may lead to not starving writers on Linux
but everywhere else. Revert this and if the starvation occurs
resolve it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The original name didn't hint at the fact that PHBs are
a pSeries-specific concept.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Recent commits made it so that pci-root controllers for
pSeries guests are automatically assigned the
spapr-pci-host-bridge model name; however, that prevents
guests to migrate to older versions of libvirt which don't
know about that model name at all, which at the moment is
all of them :)
To avoid the issue, just strip the model name from PHBs
when formatting the migratable XML; guests that use more
than one PHB are not going to be migratable anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1458708
If the parent provided for the storage pool adapter is not vHBA
capable, then issue a configuration error even though the provided
wwnn/wwpn were found.
It is a configuration error to provide a mismatched parent to
the wwnn/wwpn. The @parent is optional and is used as a means to
perform duplicate pool source checks.
https://bugzilla.redhat.com/show_bug.cgi?id=1472277
Commit id '106930aaa' altered the order of checking for an existing
vHBA (e.g something created via nodedev-create functionality outside
of the storage pool logic) which inadvertantly broke the code to
decide whether to alter/force the fchost->managed field to be 'yes'
because the storage pool will be managing the created vHBA in order
to ensure when the storage pool is destroyed that the vHBA is also
destroyed.
This patch moves the check (and checkParent helper) for an existing
vHBA back into the createVport in storage_backend_scsi. It also
adjusts the checkParent logic to more closely follow the intentions
prior to commit id '79ab0935'. The changes made by commit id '08c0ea16f'
are only necessary to run the virStoragePoolFCRefreshThread when
a vHBA was really created because there's a timing lag such that
the refreshPool call made after a startPool from storagePoolCreate*
wouldn't necessarily find LUNs, but the thread would. For an already
existing vHBA, using the thread is unnecessary since the vHBA already
exists and the lag to configure the LUNs wouldn't exist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since virnodedeviceobj now has a self-lockable hash table, there's no
need to lock the table from the driver for processing. Thus remove the
locks from the driver for NodeDeviceObjList mgmt.
This includes the test driver as well.
Rather than use a forward linked list of elements, it'll be much more
efficient to use a hash table to reference the elements by unique name
and to perform hash searches.
This patch does all the heavy lifting of converting the list object to
use a self locking list that contains the hash table. Each of the FindBy
functions that do not involve finding the object by it's key (name) is
converted to use virHashSearch in order to find the specific object.
When searching for the key (name), it's possible to use virHashLookup.
For any of the list perusal functions that are required to evaluate
each object, the virHashForEach function is used.
Alter the node device deletion logic to make use of the parent field
from the obj->def rather than call virNodeDeviceObjListGetParentHost.
As it turns out the saved @def won't have parent_wwnn/wwpn or
parent_fabric_wwn, so the only logical path would be to call
virNodeDeviceObjListGetParentHostByParent which we can accomplish
directly via virNodeDeviceObjListFindByName.
There is no reason why two threads trying to look up two domains
should mutually exclude each other. Utilize new
virObjectRWLockable that was just introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Up until now we only had virObjectLockable which uses mutexes for
mutually excluding each other in critical section. Well, this is
not enough. Future work will require RW locks so we might as well
have virObjectRWLockable which is introduced here.
Moreover, polymorphism is introduced to our code for the first
time. Yay! More specifically, virObjectLock will grab a write
lock, virObjectLockRead will grab a read lock then (what a
surprise right?). This has great advantage that an object can be
made derived from virObjectRWLockable in a single line and still
continue functioning properly (mutexes can be viewed as grabbing
write locks only). Then just those critical sections that can
grab a read lock need fixing. Therefore the resulting change is
going to be way smaller.
In order to avoid writer starvation, the object initializes RW
lock that prefers writers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
