Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Implement "<os firmware='efi'>" support for bhyve driver.
As there are not really lot of options, try to find
"BHYVE_UEFI.fd" firmware which is installed by the
sysutils/uefi-edk2-bhyve FreeBSD port.
If not found, just use the first found firmware
in the firmwares directory (which is configurable via
config file).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parsers for the backing store strings are relatively self-contained
and rather massive piece of code. Move them to a new module called
storage_source_backingstore.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Same as virStorageFileBackend, it doesn't belong into util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's used only by storage file code so it doesn't make sense to have
it in util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until now we had a runtime code and XML related code in the same
source file inside util directory.
This patch takes the runtime part and extracts it into the new
storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code is not directly relevant to virStorageSource so move it to
separate file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce a new storage_file directory where we will keep storage file
related code. Add a backend prefix to the file name to separate it from
other future files with 'storage_file' prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch creates a new function, virDomainDefBootValidate(), to host
the validation of boot menu timeout and rebootTimeout outside of parse
time. The checks in virDomainDefParseBootXML() were changed to throw
VIR_ERR_XML_ERROR in case of parse error of those values.
In an attempt to alleviate the amount of code being stacked inside
domain_conf.c, let's put this new function in a new domain_validate.c
file that will be used to place these validations.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, slot 1 is only allowed to be used by the LPC device.
Relax this requirement and allow to use slot 1 if it was explicitly
specified by the user for any other device type. In this case the LPC
device will have the next available address.
If slot 1 was not used by the user, it'll be reserved for the LPC
device, even if it is not configured to make address assignment
consistent in case the LPC device becomes necessary (e.g. the user
adds a console or a video device which require LPC).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With libdbus our wrappers had a special syntax to create the DBus
messages by defining the DBus message signature followed by list
of arguments providing data based on the signature.
There will be no similar helper with GLib implementation as they
provide same functionality via GVariant APIs. The syntax is slightly
different mostly for how arrays, variadic types and dictionaries are
created/parsed.
Additional difference is that with GLib DBus everything is wrapped in
extra tuple (struct). For more details refer to the documentation [1].
[1] <https://developer.gnome.org/glib/stable/gvariant-format-strings.html>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was one attempt a year ago done by me to drop HAL [1] but it was
never resolved. There was another time when Dan suggested to drop HAL
driver [2] but it was decided to keep it around in case device
assignment will be implemented for FreeBSD and the fact that
virt-manager uses node device driver [3].
I checked git history and code and it doesn't look like bhyve supports
device assignment so from that POV it should not block removing HAL.
The argument about virt-manager is not strong as well because libvirt
installed from FreeBSD packages doesn't have HAL support so it will not
affect these users as well [4].
The only users affected by this change would be the ones compiling
libvirt from GIT on FreeBSD.
I looked into alternatives and there is libudev-devd package on FreeBSD
but unfortunately it doesn't work as it doesn't list any devices when
used with libvirt. It provides libudev APIs using devd.
I also looked into devd directly and it provides some APIs but there are
no APIs for device monitoring and events so that would have to be
somehow done by libvirt.
Main motivation for dropping HAL support is to replace libdbus with GLib
dbus implementation and it cannot be done with HAL driver present in
libvirt because HAL APIs heavily depends on symbols provided by libdbus.
[1] <https://www.redhat.com/archives/libvir-list/2019-May/msg00203.html>
[2] <https://www.redhat.com/archives/libvir-list/2016-April/msg00992.html>
[3] <https://www.redhat.com/archives/libvir-list/2016-April/msg00994.html>
[4] <https://svnweb.freebsd.org/ports/head/devel/libvirt/Makefile?view=markup>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When accessing libvirtd over a SSH tunnel, the remote driver needs a way
to proxy the SSH input/output stream to a suitable libvirt daemon. This
is currently done by spawning netcat, pointing it to the libvirtd socket
path. This is problematic for a number of reasons:
- The socket path varies according to the --prefix chosen at build
time. The remote client is seeing the local prefix, but what we
need is the remote prefix
- The socket path varies according to remote env variables, such as
the XDG_RUNTIME_DIR location. Again we see the local XDG_RUNTIME_DIR
value, but what we need is the remote value (if any)
- The remote driver doesn't know whether it must connect to the legacy
libvirtd or the modular daemons, so must always assume legacy
libvirtd for back-compat. This means we'll always end up using the
virtproxyd daemon adding an extra hop in the RPC layer.
- We can not able to autospawn the libvirtd daemon for session mode
access
To address these problems this patch introduces the 'virtd-ssh-helper'
program which takes the URI for the remote driver as a CLI parameter.
It then figures out which daemon to connect to and its socket path,
using the same code that the remote driver client would on the remote
host's build of libvirt.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We delay converting the remote transport string to enum form until
fairly late. As a result we're doing string comparisons when we
could be just doing enum comparisons.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've dumped all the snapshot helpers and related code into
qemu_driver.c. It accounted for ~10% of overal size of qemu_driver.c.
Separate the code to qemu_snapshot.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's a lot of helper code related to the save image handling. Extract
it to qemu_saveimage.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu_domain.c file is big as is and we should split it into
separate semantic blocks. Start with code that handles domain
namespaces.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CVE-2020-14339
When building domain's private /dev in a namespace, libdevmapper
is consulted for getting full dependency tree of domain's disks.
The reason is that for a multipath devices all dependent devices
must be created in the namespace and allowed in CGroups.
However, this approach is very fragile as building of namespace
happens in the forked off child process, after mass close of FDs
and just before dropping privileges and execing QEMU. And it so
happens that when calling libdevmapper APIs, one of them opens
/dev/mapper/control and saves the FD into a global variable. The
FD is kept open until the lib is unlinked or dm_lib_release() is
called explicitly. We are doing neither.
However, the virDevMapperGetTargets() function is called also
from libvirtd (when setting up CGroups) and thus has to be thread
safe. Unfortunately, libdevmapper APIs are not thread safe (nor
async signal safe) and thus we can't use them. Reimplement what
libdevmapper would do using plain C (ioctl()-s, /proc/devices
parsing, /dev/mapper dirwalking, and so on).
Fixes: a30078cb83
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858260
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no need to provide relative paths to the current directory if
we provide search paths using --directory option for xgettext.
In addition it will make libvirt.pot file look cleaner as it will not
contain relative paths to current directory. It improves the situation
for developers which are using different build path as that would
change the relative path in libvirt.pot as well. After this patch
it will not happen anymore.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the domain job related APIs were present in `qemu_domain.c`
along with the other domain APIs. In this patch, we move all the
qemu domain job APIs into a separate file.
Also, in this process, `qemuDomainTrackJob()`,
`qemuDomainFreeJob()`, `qemuDomainInitJob()` and
`qemuDomainObjSaveStatus()` were converted to a non-static
funciton and exposed using `qemu_domain.h`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Long ago we switched the vbox driver to run inside libvirtd to avoid
libvirt.so being polluted with GPLv2-only code. Since libvirtd is not
built on Windows, we disabled vbox on Windows builds. Thus the MSCOM
glue code is not required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want a way to easily run a private GMainContext in a
thread, with correct synchronization between startup
and shutdown of the thread.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virbpf module wraps syscalls to BPF. However, if the kernel
headers used at the compile time don't have support for BPF the
module offers stubs which return a negative one to signal error
to the caller. But there is a slight discrepancy between real
functions and these stubs. While the former set errno and return
-1 the latter report an error (without setting the errno) and
return -1. This is not optimal because the caller might see stale
errno and overwrite the error message with a less accurate one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.
Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.
This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.
This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is no longer require since switching to the GLib based
event loop impl.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* chown: use is conditionally compiled
* configmake: functionality imported to Makefile.am
* getaddrinfo: we have no portability problems
with Windows impl
* getpass: simplified impl is imported
* mgetgroups: getgrouplist is used directly
* net_if: header includes are conditionalized
* netdb: header includes are conditionalized
* passfd: simplified impl is imported
* posix-shell: functionality was unused & removed
* sigaction: usage is conditionalized
* sigpipe: usage is conditionalized
* stat-time: struct stat is used directly
* strchrnul: usage is eliminated
* strtok_r: usage is not a portability problem
* sys_stat: usage is conditionalized
* uname: rewritten to use native Win32 function to
get host arch
* waitpid: usage is conditionalized
* wcwidth: rewritten using g_unichar APIs
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This module will be used by virHostdevManager and it's inspired
by virPCIDevice module. They are very similar except instead of
what makes a NVMe device: PCI address AND namespace ID. This
means that a NVMe device can appear in a domain multiple times,
each time with a different namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Introduce virsh commands for performing backup jobs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we use GRegex everywhere, there is no need for this module.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function loads the BPF prog with prepared map into kernel and
attaches it into guest cgroup. It can be also used to replace existing
program in the cgroup if we need to resize BPF map to store more rules
for devices. The old program will be closed and removed from kernel.
There are two possible ways how to create BPF program:
- One way is to write simple C-like code which can by compiled into
BPF object file which can be loaded into kernel using elfutils.
- The second way is to define macros which look like assembler
instructions and can be used directly to create BPF program that
can be directly loaded into kernel.
Since the program is not too complex we can use the second option.
If there is no program, all devices are allowed, if there is some
program it is executed and based on the exit status the access is
denied for 0 and allowed for 1.
Our program will follow these rules:
- first it will try to look for the specific key using major and
minor to see if there is any rule for that specific device
- if there is no specific rule it will try to look for any rule that
matches only major of the device
- if there is no match with major it will try the same but with
minor of the device
- as the last attempt it will try to look for rule for all devices
and if there is no match it will return 0 to deny that access
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to implement devices controller with cgroup v2 we need to
add support for BPF programs, cgroup v2 doesn't have devices controller.
This introduces required helpers wrapping linux syscalls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>