If flag VIR_CONNECT_GET_DOMAIN_CAPABILITIES_DISABLE_DEPRECATED_FEATURES
is passed to qemuConnectGetDomainCapabilities, then the domain's CPU
model features will be updated to set any deprecated features to the
'disabled' policy.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION_DEPRECATED_PROPS for detecting
if query-cpu-model-expansion can report deprecated CPU model properties.
QEMU introduced this capability in 9.1 release. Add flag and deprecated
features to the capabilities test data for QEMU 9.1 and 9.2 replies/XML
since it can now be accounted for.
When probing for the host CPU, perform a full CPU model expansion to
retrieve the list of features deprecated across the entire architecture.
The list and count are stored in the host's CPU model info within the
QEMU capabilities. Other info resulting from this query (e.g. model
name, etc) is ignored.
The new capabilities flag is used to fence off the extra query for
architectures/QEMU binaries that do not report deprecated CPU model
features.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
query-cpu-model-expansion may report an array of deprecated properties.
This array is optional, and may not be supported for a particular
architecture or reported for a particular CPU model. If the output is
present, then capture it and store in a qemuMonitorCPUModelInfo struct
for later use.
The deprecated features will be retained in qemuCaps->kvm->hostCPU.info
and will be stored in the capabilities cache file under the <hostCPU>
element using the following format:
<deprecatedFeatures>
<property name='bpb'/>
<property name='csske'/>
<property name='cte'/>
<property name='te'/>
</deprecatedFeatures>
At this time the data is only queried, parsed, and cached. The data
will be utilized in a subsequent patch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Some models are just aliases to other models. Make this relation
available to users via domain capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'stream' type for 'netdev-add' recently added support for
'reconnect-ms' which supersedes 'reconnect' (now deprecated). Add a
capability which will allow us to switch to the new property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the QMP schema lookup queries were grouped by the first
component of the query (which was also sorted), but not fully sorted.
This deteriorated over time. Re-group the query strings now that some
were added at the bottom.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move HostdevHostSupportsPassthroughVFIO method to hypervisor to be
shared between qemu and ch drivers.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add capability QEMU_CAPS_VIRTIO_CCW_DEVICE_LOADPARM to detect multi boot
device support in QEMU by checking the virtio-blk-ccw device property
existence of loadparm.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Domain capabilities include information about support for various
devices and models.
Panic devices are not included in the output which means that management
applications need to include the logic for choosing the right device
model or request a default model and try defining such a domain.
Add reporting of panic device models into the domain capabilities based
on the logic in qemuValidateDomainDefPanic() and also report whether
panic devices are supported based on whether at least one model is
supported. That way consumers of the domain capability XML can
differentiate between libvirt not reporting the panic device models or
no model being supported.
Resolves: https://issues.redhat.com/browse/RHEL-65187
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A function for accessing a list of features blocking CPU model
usability.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Hyper-V enlightenment features can have hyphenated names which libvirt
exposes under Hyper-V features with underscored names. When libvirt
checks that all requested features were enabled by QEMU (on x86
architectures) it first queries for all those that QEMU knows and
compiles them in a map while using the virQEMUCapsCPUFeaturesX86 for
translations.
Some features (well, all Hyper-V features with underscores) were not
present in the translation table and were incorrectly reported as not
enabled, consequently failing the start of any such domain.
Add all hyphenated/underscored Hyper-V feature names into the
aforementioned translation table. That way domains with these features
enabled can be started when QEMU and the kernel support them.
Resolves: https://issues.redhat.com/browse/RHEL-7122
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
New qemu introduced the 'reconnect-ms' field for character devices
allowing the reconnect timeout to be specified in milliseconds, which
also deprecates the existing 'reconnect' field that libvirt uses.
To avoid use of deprecated interfaces add a capability which will allow
us to use the new field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'snapshot-save/delete' QMP commands were introduced in QEMU 6.0.0,
so we add a compatible capability to check if target QEMU binary supports it.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU calls the same feature differently, but translating the names in
libvirt does not make sense because the name in QEMU conflicts with
another feature. QEMU will not change the name for compatibility reasons
so we can just drop our invented name as it is not supported by QEMU.
Apart from this slightly different reason behind the feature being
unsupported by QEMU the situation is similar to vmx-ept-{uc,wb} dropped
in the previous patch and so is the implications.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although QEMU knows and enables the corresponding MSR bits, it does not
allow users to configure them (there are no names attached to them).
They should have never been added to the CPU map and definitely not to
CPU models as the features will always be considered disabled regardless
on their actual state as QEMU will not report them.
While we cannot drop them completely for backward compatibility, we can
at least remove them from all CPU models.
This is effectively no change for CPU models where the features were
marked with added='yes' because migration source would always remove the
features from domain XML so not adding them to the live XML does not
hurt. On the other side the destination could not ever be surprised by
the features being suddenly enabled as QEMU never reports them, which
means libvirt considers them disabled all the time.
GraniteRapids CPU model is the only one which contains the feature ever
since it was introduced in libvirt, but it was never possible to migrate
a domain with such CPU. The source would always mark vmx-ept-wb as
disabled and the destination without the fixes in this series would drop
the feature from the XML completely as it is unsupported by QEMU and
disabled, but when probing for the actual CPU created by QEMU libvirt
would expect the feature to be enabled (as it is included in the CPU
model and not explicitly mentioned in the domain definition) and fail
the migration. There's nothing the source could do to workaround the
behavior on the destination and migration to older libvirt will still be
broken. But it's possible to migrate a domain with GraniteRapids to a
destination with this series applied from both old and new source.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This feature is called "vmx-invept-single-context-noglobals" in QEMU and
our CPU map even contains the appropriate alias. But we failed to
actually translate the name when talking to QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This advertises the feature only for the architectures and
machine types where it can actually be used.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We will soon need to use it in a context where we don't have
a virDomainDef handy.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tells us whether given QEMU binary supports the
'-machine xxx,i8042=on/off' toggle used to enable/disable PS/2
controller emulation.
A few facts:
- This option was introduced in QEMU 7.0 and defaults to 'on'
- QEMU versions before 7.0 enabled i8042 controller emulation implicitly
- This option (and i8042 controller emulation itself) is only supported
by descendants of the generic PC machine type (e.g. i440fx, q35, etc.)
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until now, we've assumed that all x86 machines have a PS/2
controller built-in. This assumption was correct until QEMU v4.2
introduced a new x86-based machine type - microvm.
Due to this assumption, a pair of unnecessary PS/2 inputs are implicitly
added to all microvm domains. This patch fixes that by whitelisting
machine types which are known to include the i8042 PS/2 controller.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The support for VXHS device was removed in QEMU commit
v5.1.0-rc1~16^2~10. Since we require QEMU-5.2.0 at least there's
no QEMU that has the device and thus the corresponding capability
can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that the minimal required version of QEMU is 5.2.0 the
conditional setting of QEMU_CAPS_ENABLE_FIPS and
QEMU_CAPS_NETDEV_USER is effectively a dead code. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
According to repology.org and/or distro repos these are the version of QEMU:
CentOS Stream 9: qemu-kvm-9.0.0
Debian 11: qemu-5.2.0
Fedora 39: qemu-8.3.1
openSUSE Leap 15.3: qemu-5.2.0
RHEL-8: qemu-6.2.0
Ubuntu 22.04: qemu-6.2.0
Since the minimal version is 5.2.0 we can bump from 4.2.0 to
5.2.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since -netdev user can be disabled during QEMU compilation, we
can't blindly expect it to just be there. We need a capability
that tracks its presence.
For qemu-4.2.0 we are not able to detect the capability so do the
next best thing - assume the capability is there. This is
consistent with our current behaviour where we blindly assume the
capability, anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The inspiration for these rules comes from
qemuValidateDomainDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While it's very unlikely to have QEMU that supports SEV-SNP but
doesn't support plain SEV, for completeness sake we ought to
query SEV capabilities if QEMU supports either. And similarly to
QEMU_CAPS_SEV_GUEST we need to clear the capability if talking to
QEMU proves SEV is not really supported.
This in turn removes the 'sev-snp-guest' capability from one of
our test cases as Peter's machine he uses to refresh capabilities
is not SEV capable. But that's okay. It's consistent with
'sev-guest' capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks sev-snp-guest object availability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
'virQEMUCapsSearchData' has been unused since
commit bc33b8c639 ("qemu: capabilities: Drop the
virQEMUCapsCacheLookupByArch function")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCPUDefAddFeatureInternal helper function only fails if it is
called with VIR_CPU_ADD_FEATURE_MODE_EXCLUSIVE, which is only used in
virCPUDefAddFeature. The other callers (virCPUDefUpdateFeature and
virCPUDefAddFeatureIfMissing) will never get anything but 0 from
virCPUDefAddFeatureInternal and their return type can be changed to
void.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability can be used to detect if the qemu binary already
supports 'ras' feature for 'virt' machine type.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement support for loongarch64 in the QEMU driver.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add loongarch cpu support, Define new cpu type 'loongarch64'
and implement it's driver functions.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This capability reflects presence of -device usb-mtp.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In near future we will want to check whether capabilities for
given virtType exist, but report an error on our own. Introduce
reportError argument which makes the function report an error iff
set.
In one specific case (virQEMUCapsGetDefaultVersion()) we were
even overwriting (more specific) error message reportd by
virCapabilitiesDomainDataLookup(). Drop that too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'display-reload' QMP command was introduced in QEMU 6.0.0, so we
add a compatible capability to check if target QEMU binary supports it.
{"execute":"display-reload", "arguments":{"type": "vnc", "tls-certs": true}}
The new QMP refer to:
9cc0765165
Signed-off-by: Zheng Yan <yanzheng759@huawei.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ideally check='partial' would check exactly the features QEMU would want
to enable when asked for a specific CPU model (and features). But there
is no way we could ask QEMU how a specific CPU would look like. So we
use our definition from CPU map, which may slightly differ as QEMU adds
or removes features from CPU models, and thus we may end up checking
features which QEMU would not enable while missing some required ones.
We can do better in specific cases, though. If a CPU definition uses
only a model and disabled features (or none at all), we already know
whether QEMU can enable all features required by the CPU model as that's
what we use to set usable='yes' attribute in the list of available CPU
models in domain capbilities XML. So when a usable CPU model is
requested without asking for additional features (disabling features is
fine) we can avoid our possible inaccurate check using our CPU map.
For backward compatibility we only consider usable models. If a
specified model is not usable, we still check it the old way and even
let QEMU start it (and disable some features) in case our definition
lacks some features compared to QEMU.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/608
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability is asserted when both block-stream and block-commit QMP
commands support the 'backing-mask-protocol' argument.
The argument causes qemu to record 'raw' as the backing file format in
case when a protocol node is used directly. This is needed to preserve
compatibility of images after a block-commit or block-pull libvirt
operation with older libvirt versions in case when we'll want to remove
the unneded 'raw' format drivers from the block graph.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virXPathNodeSet' returns -1 only when 'ctxt' or 'xpath' are NULL or
when the 'xpath' string is invalid. Both are programming errors. It
doesn't make sense for the code to overwrite the error message for
anything supposedly more relevant.
The majority of calls to 'virXPathNodeSet' already didn't do this, so
this patch fixes the rest to prevent it from spreading again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting from v8.2.0-rc0~74^2~2 QEMU has .dynamic-memslots
attribute for virtio-mem-pci device. Introduce a capability which
reflects that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It belongs next to qemuDomainSupportsPCI().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used anywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability represents the support for mapping virtqueues to
iothreads for the 'virtio-blk' device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
