Running shutdown with mode agent on a shutoff domain gives cryptic
error message:
virsh # shutdown --mode agent gentoo
error: Failed to shutdown domain gentoo
error: Guest agent is not responding: QEMU guest agent is not connected
After this patch, the error is more clear:
virsh # shutdown --mode agent gentoo
error: Failed to shutdown domain gentoo
error: Requested operation is not valid: domain is not running
Reported-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity points out that qemuMonitorGetAllBlockStatsInfo could return a
-1 and thus not fill in 'stats' (leaving it NULL). Then the call to
qemuMonitorBlockStatsUpdateCapacity will dereference it.
Now that we have macros for exclusive flags and flag requirements we can
use them to cleanup the code for setvcpus and error out for all wrong
flag combination.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since the qemu capabilities are not initialized for offline VMs the
caller might get suboptimal error message:
$ virsh blockjob VM PATH --bandwidth 1
error: unsupported configuration: block jobs not supported with this QEMU binary
Move the checks after we make sure that the VM is alive.
The !modern code path needs to call qemuBlockJobEventProcess directly.
the modern code path will call it via qemuBlockJobSyncWait.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
We will want to use synchronous block jobs from qemu_migration as well,
so split this function out into a new source file.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The documentation states that for shallow block copy the image has to
have the same guest visible content as backing file of the current
image if the file is being reused. This condition can be achieved also
with a raw file (or a qcow without a backing file) so remove the
condition that would disallow it.
(This patch additionally fixes crash described in
https://bugzilla.redhat.com/show_bug.cgi?id=1215569 )
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
Coverity notes that the switch() used to check 'connected' values has
two DEADCODE paths (_DEFAULT & _LAST). Since 'connected' is a boolean
it can only be one or the other (CONNECTED or DISCONNECTED), so it just
seems pointless to use a switch to get "all" values. Convert to if-else
Add qemuDomainAddIOThread and qemuDomainDelIOThread in order to add or
remove an IOThread to/from the host either for live or config optoins
The implementation for the 'live' option will use the iothreadpids list
in order to make decision, while the 'config' option will use the
iothreadids list. Additionally, for deletion each may have to adjust
the iothreadpin list.
IOThreads are implemented by qmp objects, the code makes use of the existing
qemuMonitorAddObject or qemuMonitorDelObject APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.
Adjust the test output because our printing goes in order of the iothreadids
list now.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
Commit dcbb243bbc3470431d15cec4c5bb96d2de89a88b used the return value of
the function as int even though it returns bool.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If a user hot-attaches the guest agent channel libvirt would ignore it
until the restart of libvirtd or shutdown/destroy and start of the VM
itself.
This patch adds code that opens or closes the guest agent connection
according to the state of the guest agent channel according to
connect/disconnect events.
To allow opening the channel from the event handler qemuConnectAgent
needed to be exported.
Every domain that grabs a domain object to work over should
reference it to make sure it won't disappear meanwhile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
just as what b8e25c35d7f80a2fadc0e51e95318e39db3d1687 did, we
fall back to the ACPI method when the guest agent is unresponsive
in qemuDomainReboot().
Signed-off-by: YueWenyuan <yuewenyuan@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Because packets going through the egress from a bridge (where our
bandwidth limiting takes place) have no information about which
interface they came from, the QoS rules that we create instead
use the source MAC address of the packets to make their decisions
about which QDisc the packet should be in.
One flaw in this is that when a guest changed the MAC address it
used, packets from the guest would no longer be put into the
correct QDisc, but would instead be put in an "unprivileged"
class, resulting in the bandwidth "floor" (minimum guaranteed)
being no longer honored.
Now that libvirt has infrastructure to capture and respond to
RX_FILTER_CHANGE events from qemu (sent whenever a guest
interface modifies its MAC address, among other things), we can
notice when a guest MAC address changes, and update the QoS rules
accordingly, so that bandwidth floor is honored even after a
guest MAC address change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainSetMemoryFlags() would allow to set the initial memory greater
than the <maxMemory> field. While the configuration would not work as
memory hotplug requires NUMA to be enabled and the
qemuDomainSetMemoryFlags() API does not work on NUMA guests this just
fixes a corner case.
The fix is still worth though as it allows to induce an invalid
configuration and make the VM vanish on libvirt restart.
Additionally this tweaks error message to be more accurate.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
https://bugzilla.redhat.com/show_bug.cgi?id=1209948
So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a qemu domain is to be rebooted, from outside, at libvirt
level it looks like regular shutdown. To really restart the
domain, libvirt needs to issue reset command on the monitor once
SHUTDOWN event appeared. So, in order to differentiate bare
shutdown and reboot libvirt uses a variable within domain private
data. It's called fakeReboot. When the reboot API is called, the
variable is set, but when the shutdown API is called it must be
cleared out. But it was not for every possible case. So if user
called virDomainReboot(), and there was no ACPI daemon running
inside the guest (so guest didn't initiated shutdown sequence)
and then virDomainShutdown(mode=agent) was called bad thing
happened. We remembered the fakeReboot and instead of shutting
the domain down, we just rebooted it.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than erroring out make the best attempt to retrieve other data if
disks are inaccessible or missing. The failure will still be logged
though.
Since the bulk stats API is called on multiple domains an error like
this makes the API unusable. This regression was introduced by commit
596a13713420e01b20ce3dc3fdbe06d073682675
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1209394
After set memory parameters for running domain, save the change to live
xml is needed otherwise it will disappear after restart libvirtd.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211548
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Apparently for Xen-devel 'index' is a global and causes a build failure,
so just use the shortened 'idx' instead to avoid the conflict.
Signed-off-by: John Ferlan <jferlan@redhat.com>
QEMU does not abandon the mirror. The job carries on in the synchronised
phase and it might be either pivoted again or cancelled. The commit
hints that the described behavior was happening in a downstream version.
If the command returns false there are two possible options:
1) qemu did not reach the point where it would ask the block job to
pivot
2) pivotting failed in the actual qemu coroutine
If either of those would happen we return failure and reset the
condition that waits for the block job to complete. This makes the API
fail but in case where qemu would actually abandon the mirror the fact
is notified via the event and handled asynchronously.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1202704
qemuDomainBlockJobImpl become an unmaintainable mess over the years of
adding new stuff to it. This patch starts splitting up individual
functions from it until it can be killed entirely.
In bulk this will add lines of code rather than delete them but it will
be traded for maintainability.
Previously we checked that the vcpu we are trying to set is in range of
the number of threads presented by qemu. The problem is that if the VM
is offline the count is 0. Since the condition subtracted 1 from the
count the number would overflow and the check would never trigger.
Change the condition for more sensible ones with specific error
messages.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1208434
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
https://bugzilla.redhat.com/show_bug.cgi?id=1210545
Future IOThread setting patches would copy the code anyway, so create
and generalize the adding of pindef for the vcpu and the pinning of the
thread into their own APIs.
Future IOThread setting patches would copy the code anyway, so create
and generalize a delete cgroup and pindef for the vcpu into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the add the vcpu to a cgroup into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Support for drive-reopen was never present in the upstream code so we
don't need to pause the VM when doing the block pivot. Kill all the
code related to this semi-upstream artifact.
