iptables-1.4.18 removed the long deprecated "state" match.
Use "conntrack" instead in forwarding rules.
Fixes openSUSE bug https://bugzilla.novell.com/811251#811251.
When we write a log message into a log, we separate thread ID from
timestamp using ": ". However, when storing the message into the ring
buffer, we omitted the separator, e.g.:
2013-02-27 11:49:11.852+00003745: ...
virPCIGetVirtualFunctions returns 0 even if there is no "virtfn"
entry under the device sysfs path.
And virPCIGetVirtualFunctions returns -1 when it fails to get
the PCI config space of one VF, however, with keeping the
the VFs already detected.
That's why udevProcessPCI and gather_pci_cap use logic like:
if (!virPCIGetVirtualFunctions(syspath,
&data->pci_dev.virtual_functions,
&data->pci_dev.num_virtual_functions) ||
data->pci_dev.num_virtual_functions > 0)
data->pci_dev.flags |= VIR_NODE_DEV_CAP_FLAG_PCI_VIRTUAL_FUNCTION;
to tag the PCI device with "virtual_function" cap.
However, this results in a VF will aslo get "virtual_function" cap.
This patch fixes it by:
* Ignoring the VF which has failure of getting PCI config space
(given that the successfully detected VFs are kept , it makes
sense to not give up on the failure of one VF too) with a warning,
so virPCIGetVirtualFunctions will not return -1 except out of memory.
* Free the allocated *virtual_functions when out of memory
And thus the logic can be changed to:
/* Out of memory */
int ret = virPCIGetVirtualFunctions(syspath,
&data->pci_dev.virtual_functions,
&data->pci_dev.num_virtual_functions);
if (ret < 0 )
goto out;
if (data->pci_dev.num_virtual_functions > 0)
data->pci_dev.flags |= VIR_NODE_DEV_CAP_FLAG_PCI_VIRTUAL_FUNCTION;
This abstracts nodeDeviceVportCreateDelete as an util function
virManageVport, which can be further used by later storage patches
(to support persistent vHBA, I don't want to create the vHBA
using the public API, which is not good).
This adds two util functions (virIsCapableFCHost and virIsCapableVport),
and rename helper check_fc_host_linux as detect_scsi_host_caps,
check_capable_vport_linux is removed, as it's abstracted to the util
function virIsCapableVport. detect_scsi_host_caps nows detect both
the fc_host and vport_ops capabilities. "stat(2)" is replaced with
"access(2)" for saving.
* src/util/virutil.h:
- Declare virIsCapableFCHost and virIsCapableVport
* src/util/virutil.c:
- Implement virIsCapableFCHost and virIsCapableVport
* src/node_device/node_device_linux_sysfs.c:
- Remove check_capable_vport_linux
- Rename check_fc_host_linux as detect_scsi_host_caps, and refactor
it a bit to detect both fc_host and vport_os capabilities
* src/node_device/node_device_driver.h:
- Change/remove the related declarations
* src/node_device/node_device_udev.c: (Use detect_scsi_host_caps)
* src/node_device/node_device_hal.c: (Likewise)
* src/node_device/node_device_driver.c (Likewise)
"open_wwn_file" in node_device_linux_sysfs.c is redundant, on one
hand it duplicates work of virFileReadAll, on the other hand, it's
waste to use a function for it, as there is no other users of it.
So I don't see why the file opening work cannot be done in
"read_wwn_linux".
"read_wwn_linux" can be abstracted as an util function. As what all
it does is to read the sysfs entry.
So this patch removes "open_wwn_file", and abstract "read_wwn_linux"
as an util function "virReadFCHost" (a more general name, because
after changes, it can read each of the fc_host entry now).
* src/util/virutil.h: (Declare virReadFCHost)
* src/util/virutil.c: (Implement virReadFCHost)
* src/node_device/node_device_linux_sysfs.c: (Remove open_wwn_file,
and read_wwn_linux)
src/node_device/node_device_driver.h: (Remove the declaration of
read_wwn_linux, and the related macros)
src/libvirt_private.syms: (Export virReadFCHost)
Some code mistakenly called virIdentityOnceInit directly
instead of virIdentityInitialize(). This meant that one-time
initializer was run many times with predictably bad results.
The virNetSocket & virIdentity classes accidentally got some
conditionals using HAVE_SELINUX instead of WITH_SELINUX.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
qemuGetNumadAdvice will be used by LXC driver, rename
it to virNumaGetAutoPlacementAdvice and move it to virnuma.c
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
If no user identity is available, some operations may wish to
use the system identity. ie the identity of the current process
itself. Add an API to get such an identity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow any internal API to get the current identity, add APIs
to associate a virIdentityPtr with the current thread, via a
thread local
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We've already scrubbed for comparisons of 'uid_t == -1' (which fail
on platforms where uid_t is a u16), but another one snuck in.
* src/util/virutil.c (virSetUIDGIDWithCaps): Correct uid comparison.
* cfg.mk (sc_prohibit_risky_id_promotion): New rule.
My commit 7a2e845a86 (and its
prerequisites) managed to effectively ignore the
clear_emulator_capabilities setting in qemu.conf (visible in the code
as the VIR_EXEC_CLEAR_CAPS flag when qemu is being exec'ed), with the
result that the capabilities are always cleared regardless of the
qemu.conf setting. This patch fixes it by passing the flag through to
virSetUIDGIDWithCaps(), which uses it to decide whether or not to
clear existing capabilities before adding in those that were
requested.
Note that the existing capabilities are *always* cleared if the new
process is going to run as non-root, since the whole point of running
non-root is to have the capabilities removed (it's still possible to
maintain individual capabilities as needed using the capBits argument
though).
In debug mode, the bug failed to start vm
error: Failed to start domain rhel5u9
error: internal error Out of space while reading console log output:
...
Add a virThreadCancel function. This functional is inherently
dangerous and not something we want to use in general, but
integration with SELinux requires that we provide this stub.
We leave out any Win32 impl to discourage further use and
because obviously SELinux isn't enabled on Win32
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When reading log output from QEMU/LXC we need to skip over any
libvirt log messages. Currently the QEMU driver checks for a
fixed string, but this is better done with a regex. Add a method
virLogProbablyLogMessage to do a regex check
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNetDevSetupControlFull function was protected by a
conditional on SIOCBRADDBR, which is bogus since it does
not use that symbol. Update the conditionals around all
callers to do stricter checks to ensure we always build
succesfully
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The RHEL4 vintage header files do not define GET_VLAN_VID_CMD.
Conditionally define it in our source, since the kernel can
raise a runtime error if it isn't supported
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The loop.h on RHEL4 is broken and cannot be imported. We already
detect this in configure as a side-effect of looking for whether
LO_FLAGS_AUTOCLEAR is available. We protected the impl with
HAVE_DECL_LO_FLAGS_AUTOCLEAR, but not the header import
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 0df3e89 only touched the header, but the .c file had the
same shadowing potential.
* src/util/viralloc.c (virDeleteElementsN): s/remove/toremove/ to
match the header.
A value which is equal to a integer maximum such as LLONG_MAX is
a valid integer value.
The patch fix the following error:
1, virsh memtune vm --swap-hard-limit -1
2, virsh start vm
In debug mode, it shows error like:
virScaleInteger:1813 : numerical overflow:\
value too large: 9007199254740991KiB
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=912021
Without error handler set, virDefaultErrorFunc will be called, the
error message is prefixed with "libvir:". It become a little better
by using prefix "libvirt:" when working with upper application.
For example:
1, stop libvirtd daemon
2, run virt-top.
libvir: XML-RPC error : Failed to connect \
socket to '/var/run/libvirt/libvirt-sock-ro': \
No such file or directory
libvirt: VIR_ERR_SYSTEM_ERROR: VIR_FROM_RPC: \
Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': \
No such file or directory
Currently, after we removed the qemu driver lock, it may happen
that two or more threads will start up a machine with macvlan and
race over virNetDevMacVLanCreateWithVPortProfile(). However,
there's a racy section in which we are generating a sequence of
possible device names and detecting if they exits. If we found
one which doesn't we try to create a device with that name.
However, the other thread is doing just the same. Assume it will
succeed and we must therefore fail. If this happens more than 5
times (which in massive parallel startup surely will) we return
-1 without any error reported. This patch is a simple hack to
both of these problems. It introduces a mutex, so only one thread
will enter the section, and if it runs out of possibilities,
error is reported. Moreover, the number of retries is raised to 20.
The code for putting the emulator threads in a separate cgroup
would spam the logs with warnings
2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 3
2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 4
2013-02-27 16:08:26.732+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 6
This is because it has only created child cgroups for 3 of the
controllers, but was trying to move the processes from all the
controllers. The fix is to only try to move threads in the
controllers we actually created. Also remove the warning and
make it return a hard error to avoid such lazy callers in the
future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.
Explicitly cast the magic -1 to the appropriate type.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The uid_t|gid_t values are explicitly casted to "unsigned long", but the
printf() still used "%d", which is for signed values.
Change the format to "%u".
Signed-off-by: Philipp Hahn <hahn@univention.de>
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address. Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used. According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.
Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.
Documentation and schemas have been updated.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
We pass over the address/port start/end values many times so we put
them in structs.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Let users set the port range to be used for forward mode NAT:
...
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
...
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Support setting which public ip to use for NAT via attribute
address in subelement <nat> in <forward>:
...
<forward mode='nat'>
<address start='1.2.3.4' end='1.2.3.10'/>
</forward>
...
This will construct an iptables line using:
'-j SNAT --to-source <start>-<end>'
instead of:
'-j MASQUERADE'
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
The function does not report any errors so there should be no need too
reset an existing error first. Moreover, virTypedParamsFree is mostly
called in cleanup phase where it has the potential to reset any useful
reported earlier.
If you have a qcow2 file /path1/to/file pointed to by symlink
/path2/symlink, and pass qemu /path2/symlink, then qemu treats
a relative backing file in the qcow2 metadata as being relative
to /path2, not /path1/to. Yes, this means that it is possible
to create a qcow2 file where the choice of WHICH directory and
symlink you access its contents from will then determine WHICH
backing file (if any) you actually find; the results can be
rather screwy, but we have to match what qemu does.
Libvirt and qemu default to creating absolute backing file
names, so most users don't hit this. But at least VDSM uses
symlinks and relative backing names alongside the
--reuse-external flags to libvirt snapshot operations, with the
result that libvirt was failing to follow the intended chain of
backing files, and then backing files were not granted the
necessary sVirt permissions to be opened by qemu.
See https://bugzilla.redhat.com/show_bug.cgi?id=903248 for
more gory details. This fixes a regression introduced in
commit 8250783.
I tested this patch by creating the following chain:
ls /home/eblake/Downloads/Fedora.iso # raw file for base
cd /var/lib/libvirt/images
qemu-img create -f qcow2 \
-obacking_file=/home/eblake/Downloads/Fedora.iso,backing_fmt=raw one
mkdir sub
cd sub
ln -s ../one onelink
qemu-img create -f qcow2 \
-obacking_file=../sub/onelink,backing_fmt=qcow2 two
mv two ..
ln -s ../two twolink
qemu-img create -f qcow2 \
-obacking_file=../sub/twolink,backing_fmt=qcow2 three
mv three ..
ln -s ../three threelink
then pointing my domain at /var/lib/libvirt/images/sub/threelink.
Prior to this patch, I got complaints about missing backing
files; afterwards, I was able to verify that the backing chain
(and hence DAC and SELinux relabels) of the entire chain worked.
* src/util/virstoragefile.h (_virStorageFileMetadata): Add
directory member.
* src/util/virstoragefile.c (absolutePathFromBaseFile): Drop,
replaced by...
(virFindBackingFile): ...better function.
(virStorageFileGetMetadataInternal): Add an argument.
(virStorageFileGetMetadataFromFD, virStorageFileChainLookup)
(virStorageFileGetMetadata): Update callers.
Prior to this patch, we had the callchains:
external users
\-> virStorageFileGetMetadataFromFD
\-> virStorageFileGetMetadataFromBuf
virStorageFileGetMetadataRecurse
\-> virStorageFileGetMetadataFromFD
\-> virStorageFileGetMetadataFromBuf
However, a future patch wants to add an additional parameter to
the bottom of the chain, for use by virStorageFileGetMetadataRecurse,
without affecting existing external callers. Since there is only a
single caller of the internal function, we can repurpose it to fit
our needs, with this patch giving us:
external users
\-> virStorageFileGetMetadataFromFD
\-> virStorageFileGetMetadataInternal
virStorageFileGetMetadataRecurse /
\-> virStorageFileGetMetadataInternal
* src/util/virstoragefile.c (virStorageFileGetMetadataFromFD):
Move most of the guts...
(virStorageFileGetMetadataFromBuf): ...here, and rename...
(virStorageFileGetMetadataInternal): ...to this.
(virStorageFileGetMetadataRecurse): Use internal helper.
virStorageFileGetMetadataFromFD is the only caller of
virStorageFileGetMetadataFromBuf; and it doesn't care about the
difference between a return of 0 (total success) or 1
(metadata was inconsistent, but pointer was populated as best
as possible); only about a return of -1 (could not read metadata
or out of memory). Changing the return type, and normalizing
the variable names used, will make merging the functions easier
in the next commit.
* src/util/virstoragefile.c (virStorageFileGetMetadataFromBuf):
Change return value, and rename some variables.
(virStorageFileGetMetadataFromFD): Rename some variables.
No semantic change; done so the next patch doesn't need a forward
declaration of a static function.
* src/util/virstoragefile.c (virStorageFileProbeFormatFromBuf):
Hoist earlier.
CC libvirt_util_la-vircommand.lo
../../src/util/vircommand.c:2358:1: error: 'virCommandHandshakeChild' defined but not used [-Werror=unused-function]
The function is only implemented inside #ifndef WIN32.
* src/util/vircommand.c (virCommandHandshakeChild): Hoist earlier,
so that win32 build doesn't hit an unused forward declaration.
virCommand was previously calling virSetUIDGID() to change the uid and
gid of the child process, then separately calling
virSetCapabilities(). This did not work if the desired uid was != 0,
since a setuid to anything other than 0 normally clears all
capabilities bits.
The solution is to use the new virSetUIDGIDWithCaps(), sending it the
uid, gid, and capabilities bits. This will get the new process setup
properly.
Since the static functions virSetCapabilities() and
virClearCapabilities are no longer called, they have been removed.
NOTE: When combined with "filecap $path-to-qemu sys_rawio", this patch
will make CAP_SYS_RAWIO (which is required for passthrough of generic
scsi commands to a guest - see commits e8daeeb, 177db08, 397e6a7, and
74e0349) be retained by qemu when necessary. Apparently that
capability has been broken for non-root qemu ever since it was
originally added.
Normally when a process' uid is changed to non-0, all the capabilities
bits are cleared, even those explicitly set with calls to
capng_update()/capng_apply() made immediately before setuid. And
*after* the process' uid has been changed, it no longer has the
necessary privileges to add capabilities back to the process.
In order to set a non-0 uid while still maintaining any capabilities
bits, it is necessary to either call capng_change_id() (which
unfortunately doesn't currently call initgroups to setup auxiliary
group membership), or to perform the small amount of calisthenics
contained in the new utility function virSetUIDGIDWithCaps().
Another very important difference between the capabilities
setting/clearing in virSetUIDGIDWithCaps() and virCommand's
virSetCapabilities() (which it will replace in the next patch) is that
the new function properly clears the capabilities bounding set, so it
will not be possible for a child process to set any new
capabilities.
A short description of what is done by virSetUIDGIDWithCaps():
1) clear all capabilities then set all those desired by the caller (in
capBits) plus CAP_SETGID, CAP_SETUID, and CAP_SETPCAP (which is needed
to change the capabilities bounding set).
2) call prctl(), telling it that we want to maintain current
capabilities across an upcoming setuid().
3) switch to the new uid/gid
4) again call prctl(), telling it we will no longer want capabilities
maintained if this process does another setuid().
5) clear the capabilities that we added to allow us to
setuid/setgid/change the bounding set (unless they were also requested
by the caller via the virCommand API).
Because the modification/maintaining of capabilities is intermingled
with setting the uid, this is necessarily done in a single function,
rather than having two independent functions.
Note that, due to the way that effective capabilities are computed (at
time of execve) for a process that has uid != 0, the *file*
capabilities of the binary being executed must also have the desired
capabilities bit(s) set (see "man 7 capabilities"). This can be done
with the "filecap" command. (e.g. "filecap /usr/bin/qemu-kvm sys_rawio").
This is an interim measure to make sure everything still works in this
order. The next step will be to perform capabilities drop and
setuid/gid as a single operation (which is the only way to keep any
capabilities when switching to a non-root uid).
virCommand gets two new APIs: virCommandSetSELinuxLabel() and
virCommandSetAppArmorProfile(), which both save a copy of a
null-terminated string in the virCommand. During virCommandRun, if the
string is non-NULL and we've been compiled with AppArmor and/or
SELinux security driver support, the appropriate security library
function is called for the child process, using the string that was
previously set. In the case of SELinux, setexeccon_raw() is called,
and for AppArmor, aa_change_profile() is called.
This functionality has been added so that users of virCommand can use
the upcoming virSecurityManagerSetChildProcessLabel() prior to running
a child process, rather than needing to setup a hook function to be
called (and in turn call virSecurityManagerSetProcessLabel()) *during*
the setup of the child process.
Rather than treating uid:gid of 0:0 as a NOP, we blindly pass that
through to the lower layers. However, we *do* check for a requested
value of "-1" to mean "don't change this setting". setregid() and
setreuid() already interpret -1 as a NOP, so this is just an
optimization, but we are also calling getpwuid_r and initgroups, and
it's unclear what the former would do with a uid of -1.
If a uid and/or gid is specified for a command, it will be set just
after the user-supplied post-fork "hook" function is called.
The intent is that this can replace user hook functions that set
uid/gid. This moves the setting of uid/gid and dropping of
capabilities closer to each other, which is important since the two
should really be done at the same time (libcapng provides a single
function that does both, which we will be unable to use, but want to
mimic as closely as possible).
All args except "cmd" in the call to virExec are now redundant, since
they can all be found in cmd, so remove the args and reference the
data directly in cmd. One exception to this is that "infd" was being
modified within virExec, and modifying the original in cmd caused make
check failures, so cmd->infd is copied to a local, and the local is
used during virExec().
virExecWithHook is only called from one place, so it always has the
same "hook" function (virHookCommand), and the data sent to that
function is always a virCommandPtr, so eliminate the function and
generic data from the arglist, and replace it with "virCommandPtr
cmd". The call to (hook)(data) is replaced with
"virHookCommand(cmd)". Finally, virExecWithHook is renamed to virExec.
Indentation has been updated only for code that will remain after the
next patch, which will remove all other args to virExec (since they
are now redundant, as they're all members of virCommandPtr).
Currently, if a command wants to do asynchronous IO, a callback
is registered in the libvirtd eventloop to handle writes and
reads. However, there's a race in virCommandWait. The eventloop
may already be executing the callback, while virCommandWait is
mangling internal state of virCommand. To deal with it, we need
to either introduce locking or spawn a separate thread where we
poll() on stdio from child. The former, however, requires to
unlock all mutexes held, as the event loop may execute other
callbacks which tries to lock one of the mutexes, deadlock and
thus never wake us up. So it's safer to spawn a separate thread.
This makes code easier to read, by avoiding lines longer than
80 columns and removing the repetition from the callers.
* src/util/virstoragefile.c (qedGetHeaderUL, qedGetHeaderULL):
Delete in favor of more generic macros.
(qcow2GetBackingStoreFormat, qcowXGetBackingStore)
(qedGetBackingStore, virStorageFileMatchesVersion)
(virStorageFileGetMetadataInternal): Use new macros.
* src/cpu/cpu_x86.c (x86VendorLoad): Likewise.
We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.
The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed. Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later. But for now, a macro worked.
* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.
Instead of creating an iptables command in one shot, do it in steps
so we can add conditional options like physdev and protocol.
This removes code duplication while keeping existing behaviour.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are requesting for stderr catching for all cases in
virFileWrapperFdNew(). There is no need to have a separate
function just to report an error, esp. when we can do it in
virFileWrapperFdClose().
We had an easy way to iterate set bits, but not for iterating
cleared bits.
* src/util/virbitmap.h (virBitmapNextClearBit): New prototype.
* src/util/virbitmap.c (virBitmapNextClearBit): Implement it.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test4): Test it.
To allow modifications to the lists to be synchronized, convert
virPCIDeviceList and virUSBDeviceList into virObjectLockable
classes. The locking, however, will not be self-contained. The
users of these classes will have to call virObjectLock/Unlock
in the critical regions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 34e8f63a32 introduced support for catching errors from
libvirt iohelper. However, at those times there wasn't such fancy
API as virCommandDoAsyncIO(), so everything has to be implemented
on our own. But since we do have the API now, we can use it and
drop our implementation then.
Currently, if we want to feed stdin, or catch stdout or stderr of a
virCommand we have to use virCommandRun(). When using virCommandRunAsync()
we have to register FD handles by hand. This may lead to code duplication.
Hence, introduce an internal API, which does this automatically within
virCommandRunAsync(). The intended usage looks like this:
virCommandPtr cmd = virCommandNew*(...);
char *buf = NULL;
...
virCommandSetOutputBuffer(cmd, &buf);
virCommandDoAsyncIO(cmd);
if (virCommandRunAsync(cmd, NULL) < 0)
goto cleanup;
...
if (virCommandWait(cmd, NULL) < 0)
goto cleanup;
/* @buf now contains @cmd's stdout */
VIR_DEBUG("STDOUT: %s", NULLSTR(buf));
...
cleanup:
VIR_FREE(buf);
virCommandFree(cmd);
Note, that both stdout and stderr buffers may change until virCommandWait()
returns.
QEMU is fully capable of handling VDI images and we just refuse to
work with them. As qemu-img knows and supports this, there should be
no problem with this addition.
This is of course, just basic functionality, without searching for any
backing files, etc.
Some files have the magic shifted to some offset other than 0, so we
have to support that. I also cleaned up some lines to be more
readable and added missing magic for iso file format.
Commit 6094ad7b (0.9.3 release) promoted several functions from
internal to public, but forgot to fix the documentation generator
to provide details about those functions.
For an example of what this fixes, look at:
file:///path/to/libvirt/docs/html/libvirt-libvirt.html#virEventAddHandle
before and after the patch.
* docs/apibuild.py (ignored_functions): Don't ignore functions
that were turned into official API.
* src/util/virevent.c: Fix comments to pass through parser.
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors. In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).
It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:
https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html
This patch does that and fixes a few more instances not found by Coverity
that failed the check.
Setting the log output prefix to 0 is not supported and in fact results
in the following message:
warning : virLogParseOutputs:1021 : Ignoring invalid log output setting.
This patch changes the name of the @sep argument to @terminator and
clarifies it's usage. This patch also explicitly documents that
whitespace can't be used as @terminator as it is skipped multiple times
in the implementation.
When building with static analysis enabled, we turn on attribute
nonnull checking. However, this caused the build to fail with:
../../src/util/virobject.c: In function 'virObjectOnceInit':
../../src/util/virobject.c:55:40: error: null argument where non-null required (argument 1) [-Werror=nonnull]
Creation of the virObject class is the one instance where the
parent class is allowed to be NULL. Making things conditional
will let us keep static analysis checking for all other .c file
callers, without breaking the build on this one exception.
* src/util/virobject.c: Define witness.
* src/util/virobject.h (virClassNew): Use it to force most callers
to pass non-null parameter.
The Coverity static analyzer was generating many false positives for the
unary operation inside the VIR_FREE() definition as it was trying to evaluate
the else portion of the "?:" even though the if portion was (1).
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, whenever somebody calls saferead() on nonblocking FD
(safewrite() is totally interchangeable for purpose of this message)
he might get wrong return value. For instance, in the first iteration
some data is read. The number of bytes read is stored into local
variable 'nread'. However, in next iterations we can get -1 from
read() with errno == EAGAIN, in which case the -1 is returned despite
fact some data has already been read. So the caller gets confused.
Bare read() should be used for nonblocking FD.
Working with virTypedParameters in clients written in C is ugly and
requires all clients to duplicate the same code. This set of APIs makes
this code for manipulating with virTypedParameters integral part of
libvirt so that all clients may benefit from it.
A build on FreeBSD failed with:
util/virportallocator.c:108: error: storage size of 'addr' isn't known
util/virportallocator.c:123: error: 'INADDR_ANY' undeclared (first use in this function)
It turns out that while POSIX allows sockaddr_in to leak in through
<arpa/inet.h> (the way Linux does it), it is not mandatory, and
conforming applications are required to get it through <netinet/in.h>.
* src/util/virportallocator.c: Include header for struct
sockaddr_in.
* tests/virportallocatortest.c: Likewise.
The QEMU driver default max port is 65535, but it then increments
this by 1 to 65536. This maps to 0 in an unsigned short :-( This
was apparently done so that for() loops could use "< max" instead
of "<= max". Remove this insanity and just make the loop do the
right thing.
A great many virObject instances require a mutex, so introduce
a convenient class for this which provides a mutex. This avoids
repeating the tedious init/destroy code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently all classes must directly inherit from virObject.
This allows for arbitrarily deep hierarchy. There's not much
to this aside from chaining up the 'dispose' handlers from
each class & providing APIs to check types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make cpuset local to the while loop and free it once done with it each
time through the loop. Add a sa_assert() to virBitmapParse() to keep Coverity
from believing there could be a negative return and possible resource leak.
Commit c308a9ae was incomplete; it resolved the configure failure,
but not a later build failure.
* src/util/virnetdevbridge.c: Include pre-req header.
* configure.ac (AC_CHECK_HEADERS): Prefer standard in.h over
non-standard ip6.h.
There's no need to do lots of readlink() calls to canonicalize
a name if we're only going to use stat() on it, since stat()
already chases symlinks.
* src/util/virutil.c (virGetDeviceID): Let stat() do the symlink
chasing.
Pass stub driver name directly to pciDettachDevice and pciReAttachDevice to fit
for different libvirt drivers. For example, qemu driver prefers pci-stub, but
Xen prefers pciback.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
"virGetDeviceID" could be used across the sources, but it doesn't
relate with this series, and could be done later.
* src/util/virutil.h: (Declare virGetDeviceID, and
vir{Get,Set}DeviceUnprivSGIO)
* src/util/virutil.c: (Implement virGetDeviceID and
vir{Get,Set}DeviceUnprivSGIO)
* src/libvirt_private.syms: Export private symbols of upper helpers
This is an adjustment to the fix for
https://bugzilla.redhat.com/show_bug.cgi?id=889319
to account for two bonehead mistakes I made.
commit ac2797cf2a attempted to fix a
problem with netlink in newer kernels requiring an extra attribute
with a filter flag set in order to receive an IFLA_VFINFO_LIST from
netlink. Unfortunately, the #ifdef that protected against compiling it
in on systems without the new flag went a bit too far, assuring that
the new code would *never* be compiled, and even if it had, the code
was incorrect.
The first problem was that, while some IFLA_* enum values are also
their existence at compile time, IFLA_EXT_MASK *isn't* #defined, so
checking to see if it's #defined is not a valid method of determining
whether or not to add the attribute. Fortunately, the flag that is
being set (RTEXT_FILTER_VF) *is* #defined, and it is never present if
IFLA_EXT_MASK isn't, so it's sufficient to just check for that flag.
And to top it off, due to the code not actually compiling when I
thought it did, I didn't realize that I'd been given the wrong arglist
to nla_put() - you can't just send a const value to nla_put, you have
to send it a pointer to memory containing what you want to add to the
message, along with the length of that memory.
This time I've actually sent the patch over to the other machine
that's experiencing the problem, applied it to the branch being used
(0.10.2) and verified that it works properly, i.e. it does fix the
problem it's supposed to fix. :-/
To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=889319
When assigning an SRIOV virtual function to a guest using "intelligent
PCI passthrough" (<interface type='hostdev'>, which sets the MAC
address and vlan tag of the VF before passing its info to qemu),
libvirt first learns the current MAC address and vlan tag by sending
an NLM_F_REQUEST message for the VF's PF (physical function) to the
kernel via a NETLINK_ROUTE socket (see virNetDevLinkDump()); the
response message's IFLA_VFINFO_LIST section is examined to extract the
info for the particular VF being assigned.
This worked fine with kernels up until kernel commit
115c9b81928360d769a76c632bae62d15206a94a (first appearing in upstream
kernel 3.3) which changed the ABI to not return IFLA_VFINFO_LIST in
the response until a newly introduced IFLA_EXT_MASK field was included
in the request, with the (newly introduced, of course) RTEXT_FILTER_VF
flag set.
The justification for this ABI change was that new fields had been
added to the VFINFO, causing NLM_F_REQUEST messages to fail on systems
with large numbers of VFs if the requesting application didn't have a
large enough buffer for all the info. The idea is that most
applications doing an NLM_F_REQUEST don't care about VFINFO anyway, so
eliminating it from the response would lower the requirements on
buffer size. Apparently, the people who pushed this patch made the
mistaken assumption that iproute2 (the "ip" command) was the only
package that used IFLA_VFINFO_LIST, so it wouldn't break anything else
(and they made sure that iproute2 was fixed.
The logic of this "fix" is debatable at best (one could claim that the
proper fix would be for the applications in question to be fixed so
that they properly sized the buffer, which is what libvirt does
(purely by virtue of using libnl), but it is what it is and we have to
deal with it.
In order for <interface type='hostdev'> to work properly on systems
with a kernel 3.3 or later, libvirt needs to add the afore-mentioned
IFLA_EXT_MASK field with RTEXT_FILTER_VF set.
Of course we also need to continue working on systems with older
kernels, so that one bit of code is compiled conditionally. The one
time this could cause problems is if the libvirt binary was built on a
system without IFLA_EXT_MASK which was subsequently updated to a
kernel that *did* have it. That could be solved by manually providing
the values of IFLA_EXT_MASK and RTEXT_FILTER_VF and adding it to the
message anyway, but I'm uncertain what that might actually do on a
system that didn't support the message, so for the time being we'll
just fail in that case (which will very likely never happen anyway).
This patch fixes the lack of error messages when libvirt fails to find
VFINFO in a returned netlinke response message.
https://bugzilla.redhat.com/show_bug.cgi?id=827519#c10 is an example
of the error message that was previously logged when the
IFLA_VFINFO_LIST object was missing from the netlink response. The
reason for this failure is detailed in
https://bugzilla.redhat.com/show_bug.cgi?id=889319
Even though that root problem has been fixed, the experience of
finding the root cause shows us how important it is to properly log an
error message in these cases. This patch *seems* to replace the entire
function, but really most of the changes are due to moving code that
was previously inside an if() statement out to the top level of the
function (the original if() was reversed and made to log an error and
return).
Revert the complex workaround of commit 39d91e9, now that we have
a nicer framework for shutting up broken gcc.
* src/util/buf.c (virBufferEscape): Simplify.
Historically there was an inconsistency in handling of the
itanium arch. The xen driver & CPU model code treated it
as 'ia64' but the QEMU capabilities code used 'itanium'. On
the grounds that no one has ever seriously used itanium
with QEMU, while RHEL shipped itanium with Xen, we should
favour 'ia64' as the canonical format
Introduce a 'virArch' enum for CPU architectures. Include
data type providing wordsize and endianness, and APIs to
query this info and convert to/from enum and string form.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is yet another refinement to the fix for CVE-2012-3411:
https://bugzilla.redhat.com/show_bug.cgi?id=833033
It turns out that it would be very intrusive to correctly backport the
entire --bind-dynamic option to older dnsmasq versions
(e.g. dnsmasq-2.48 that is used on RHEL6.x and CentOS 6.x), but very
simple to patch those versions to just use SO_BINDTODEVICE on all
their listening sockets (SO_BINDTODEVICE also has the desired effect
of permitting only traffic that was received on the interface(s) where
dnsmasq was set to listen.)
This patch modifies the dnsmasq capabilities detection to detect the
string:
--bind-interfaces with SO_BINDTODEVICE
in the output of "dnsmasq --version", and in that case realize that
using the old --bind-interfaces option is just as safe as
--bind-dynamic (and therefore *not* forbid creation of networks that
use public IP address ranges).
If -bind-dynamic is available, it is still preferred over
--bind-interfaces.
Note that this patch does no harm in upstream, or in any distro's
downstream if it happens to end up there, but builds for distros that
have a new enough dnsmasq to support --bind-dynamic do *NOT* need to
specifically backport this patch; it's only required for distro
releases that have dnsmasq too old to have --bind-dynamic (and those
distros will need to add the SO_BINDTODEVICE patch to dnsmasq,
*including the extra string in the --version output*, as well.
When LXC labels USB devices during hotplug, it is running in
host context, so it needs to pass in a vroot path to the
container root.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There was a double free issue caused by virSysinfoRead on s390,
as the same manufacturer string instance was assigned to more
than one processor record.
Cleaned up other potential memory issues and restructured the sysinfo
parsing code by moving repeating patterns into a helper function.
The restructuring made it necessary to conditionally disable
-Wlogical-op for some older GCC versions, using pragma GCC diagnostic.
This is a GCC specific pragma, which is acceptable, since we're
using it to work around a GCC specific bug.
Finally, added a function virSysinfoSetup to configure the sysinfo
data source files/script during run time, to facilitate writing test
programs. This function is not published in sysinfo.h and only
there for testing.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
