Commit Graph

321 Commits

Author SHA1 Message Date
Eric Blake
3cdf4dd49a snapshot: improve snapshot-list error message
https://bugzilla.redhat.com/show_bug.cgi?id=869100 mentioned some
confusion about 'virsh snapshot-list' errors.  Clean up a
misleading error message, and add some documentation.

* tools/virsh-snapshot.c (cmdSnapshotList): Mention --current
rather than --from when appropriate.
* tools/virsh.pod (snapshot-list): Mention that the named starting
point is NOT part of the list except under --tree.
2012-10-25 16:48:08 -06:00
Viktor Mihajlovski
08842171d4 virNodeGetCPUMap: Implement virsh support.
- Added a new host command nodecpumap
- Added documentation

Example:
$ virsh nodecpumap
CPUs present:  8
CPUs online:   3
CPU map:       y-y-y---

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-10-23 18:48:06 -06:00
Cole Robinson
2143ced7f5 docs: virsh: clarify behavior of send-key
https://bugzilla.redhat.com/show_bug.cgi?id=860004
2012-10-21 13:21:50 -04:00
Osier Yang
f81f0f2f1d node_memory: Add new parameter field to tune the new sysfs knob
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.

This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
2012-10-15 17:35:54 +08:00
Ján Tomko
149c87b49d Various typos and misspellings 2012-10-12 00:03:43 +02:00
Jiri Denemark
28f8dfdccc Add MIGRATABLE flag for virDomainGetXMLDesc
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.

This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
2012-10-11 15:11:42 +02:00
Eric Blake
2a1aaa609e virsh: add qemu-monitor-command --pretty
I was using qemu-monitor-command during development, and found it quite
hard to use.  Compare the results of this patch on ease of reading:

$ virsh qemu-monitor-command          dom '{"execute":"query-version"}'
{"return":{"qemu":{"micro":1,"minor":12,"major":0},"package":"(qemu-kvm-0.12.1.2)"},"id":"libvirt-7683"}

$ virsh qemu-monitor-command --pretty dom '{"execute":"query-version"}'
{
    "return": {
        "qemu": {
            "micro": 1,
            "minor": 12,
            "major": 0
        },
        "package": "(qemu-kvm-0.12.1.2)"
    },
    "id": "libvirt-7674"
}

* tools/virsh-host.c (cmdQemuMonitorCommand): New option.
* tools/virsh.pod (qemu-monitor-command): Document it.
2012-10-08 15:47:06 -06:00
Dave Allan
13c69cd0b4 Add note about numeric domain names to manpage
Clarify that domains with numeric names can only be identified by
their domain id.
2012-10-01 15:00:13 -06:00
Laine Stump
fe7872827f virsh: new net-update command
This command uses the new virNetworkUpdate() API to modify an existing
network definition, and optionally have those modifications take
effect immediately without restarting the network.

An example usage:

  virsh net-update mynet add-last ip-dhcp-host \
   "<host mac='00:11:22:33:44:55' ip='192.168.122.45'/>" \
   --live --config

If you like, you can instead put the xml into a file, and call like
this:

  virsh net-update mynet add ip-dhcp-host /tmp/myxml.xml
   --live --config

virsh will autodetect whether the argument is itself an xml element,
or if it's a file, by looking at the first character - the first
character of an xml element is always "<", and the first character of
a file is almost always *not* "<" (in the rare case that it is, the
user could specify "./<filename...").

A --parent-index option is also available (to give the index within a
list of parent objects, e.g. the index of the parent <ip> element when
updating ip-dhcp-host elements), but is optional and at least for now
will probably be used rarely.

--live, --config, and --current options - if you specify --live, only
the live state of the network will be updated. If you also specify
--config, then the persistent configuration will also be updated;
these two commands can be given separately, or both together. If you
don't specify either (you can optionally specify "--current" for the
same effect), then the "current" config will be updated (i.e. if the
network is active, then only its live config is affected, but if the
network is inactive, only the persistent config is affected).
2012-09-20 22:20:22 -04:00
Eric Blake
ed23b10660 blockjob: add virsh blockcommit
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk.  Further arguments can fine-tune which portion of the
chain is committed.  Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.

With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.

The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.

* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
2012-09-17 21:44:49 -06:00
Peter Krempa
60b0284f24 virsh: Clarify behavior of domain list filtering.
Some combinations of filtering flags produce no result. This patch tries
to clarify this.
2012-09-17 16:35:24 +02:00
Osier Yang
0e96fa5489 node_memory: Expose the APIs to virsh
New command node-memory-tune to get/set the node memory parameters,
only two parameters are allowed to set (pages_to_scan, and sleep_millisecs,
see documents in this patch for more details).

Example of node-memory-tune's output:

Shared memory:
	pages_to_scan   100
	sleep_millisecs 20
	pages_shared    0
	pages_sharing   0
	pages_unshared  0
	pages_volatile  0
	full_scans      0
2012-09-17 13:55:35 +08:00
Osier Yang
d15d092cda list: Use virConnectListAllSecrets in virsh
This introduces four new options for secret-list, to filter the
returned secrets by whether it's ephemeral or not, and/or by
whether it's private or not.

* tools/virsh-secret.c: (New helper vshSecretSorter,
  vshSecretListFree, and vshCollectSecretList; Use the new
  API for secret-list; error out if flags are specified,
  because there is no way to filter the results when using
  old APIs (no APIs to get the properties (ephemeral, private)
  of a secret yet).

* tools/virsh.pod: Document the 4 new options.
2012-09-17 13:23:19 +08:00
Osier Yang
aa20e97578 list: Use virConnectListAllNodeDevices in virsh
tools/virsh-nodedev.c:
  * vshNodeDeviceSorter to sort node devices by name

  * vshNodeDeviceListFree to free the node device objects list.

  * vshNodeDeviceListCollect to collect the node device objects, trying
    to use new API first, fall back to older APIs if it's not supported.

  * Change option --cap to accept multiple capability types.

tools/virsh.pod
  * Update document for --cap
2012-09-17 11:32:53 +08:00
Osier Yang
895913dd59 list: Use virConnectListAllNetworks in virsh
tools/virsh-network.c:
  * vshNetworkSorter to sort networks by name

  * vshNetworkListFree to free the network objects list.

  * vshNetworkListCollect to collect the network objects, trying
    to use new API first, fall back to older APIs if it's not supported.

  * New options --persistent, --transient, --autostart, --no-autostart,
    for net-list, and new field 'Persistent' for its output.

tools/virsh.pod:
  * Add documents for the new options.
2012-09-11 18:35:06 +08:00
Osier Yang
6cdf0aafc8 virsh: Improve the document for pool-list
Which is lost by commit 93a346d353.
2012-09-07 11:10:48 +08:00
Osier Yang
93a346d353 list: Use virConnectListAllStoragePools in virsh
tools/virsh-pool.c:
  * vshStoragePoolSorter to sort the pool list by pool name.

  * struct vshStoragePoolList to present the pool list, pool info
    is collected by list->poolinfo if 'details' is specified by
    user.

  * vshStoragePoolListFree to free the pool list

  * vshStoragePoolListCollect to collect the pool list, new API
    virStorageListAllPools is tried first, if it's not supported,
    fall back to older APIs.

  * New options --persistent, --transient, --autostart, --no-autostart
    and --type for pool-list. --persistent or --transient is to filter
    the returned pool list by whether the pool is persistent or not.
    --autostart or --no-autostart is to filter the returned pool list
    by whether the pool is autostarting or not. --type is to filter
    the pools by pool types. E.g.

    % virsh pool-list --all --persistent --type dir,disk

tools/virsh.pod:
   * Add documentations for the new options.
2012-09-06 22:09:49 +08:00
Osier Yang
974a63305e virsh: Fix the wrong doc for pool-list
The storage pool's management doesn't relate with a domain, it
probably was an intention, but not achieved yet. And the fact
is only active pools are listed by default.
2012-09-06 22:04:56 +08:00
Martin Kletzander
aa698a49dd docs: correct dompmwakeup description 2012-09-05 06:36:55 +02:00
Jiri Denemark
eac1ab053c virsh: Document subdriver option of attach-disk 2012-08-31 13:30:19 +02:00
MATSUDA Daiki
bf51299d57 agent: add qemu-agent-command to virsh
Add qemu-agent-command to virsh to support virDomainQemuAgentCommand().

Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
2012-08-23 19:11:03 +08:00
Stefan Hajnoczi
5b7f5a049c docs: fix blockpull/blockcopy bandwidth Mbps -> MiB/s
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-22 17:15:56 +02:00
Hu Tao
e051c482aa new interface to control emulator_period/emulator_quota
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
2012-08-22 16:56:41 +08:00
Hu Tao
4860596044 new command emulatorpin 2012-08-22 16:38:13 +08:00
Guannan Ren
7aea9b8cf7 util: set minimum value of nodesuspend duration to 60 seconds
Change the permissible minimum value of nodesuspend duration time
to 60 seconds. If option is less than the value, reports error.
Update virsh help and manpage the infomation.
2012-07-26 15:29:03 +08:00
Jan Tomko
aa03b1471c virsh man page - domain-id consistency
Using 'domain' to represent domain name, domain id or uuid all over
the man page, to be consistent with virsh help.
2012-07-25 12:03:28 -06:00
Jan Tomko
d9bbf217b1 virsh: Clarify that memtune parameters may be rounded in the man page 2012-07-24 15:34:49 -06:00
Guido Günther
0429e5f0c8 virsh: Add domhostname
to query the guest's hostname.
2012-07-20 21:54:35 +02:00
Jiri Denemark
3189dfb163 Clarify direct migration
When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:

    this function is not supported by the connection driver:
    virDomainMigrateToURI2

which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:

    Requested operation is not valid: direct migration is not supported
    by the connection driver
2012-07-13 09:15:18 +02:00
Peter Krempa
e16d434da7 virsh: Clarify documentation for virsh dompmsuspend command
Clarify the docs to make more clear what this command does and that it
requires a guest agent running in the guest.
2012-07-09 19:38:22 +02:00
Doug Goldstein
421a200987 virsh: Add domdisplay cmd for VNC, SPICE and RDP
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews

Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
2012-06-27 16:17:00 +02:00
Michal Privoznik
8d27005b50 storage: Introduce --inactive for pool-dumpxml
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
2012-06-25 13:23:28 +02:00
Peter Krempa
d62e51f86b virsh: add support for virConnectListAllDomains and clean up cmdList
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.

Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.

For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions.  The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().

This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
2012-06-21 16:07:06 +02:00
Eric Blake
35ae18f3c6 snapshot: expose new flags in virsh
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots.  This is racy, and somewhat inefficient
compared to planned API additions.  We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.

* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
2012-06-19 13:50:03 -06:00
Martin Kletzander
3dc733bb01 virsh: fix few typos on desc command
virsh help fix:
 - <--title> can also /get/ the title

virsh man page:
 - missing <domain-id>
 - <new_desc> should be <new-desc>
2012-06-19 18:20:44 +02:00
Michal Privoznik
2872155bfe virsh: Update vol-create-as manpage
as we support qed format as well.
2012-06-18 14:40:32 +02:00
Michal Privoznik
cc75fcc90f virsh: Tweak attach-* documentation
as we are missing:
attach-disk: --type can accept 'lun' too, not just cdrom or floppy.
attach-disk: --target specify logical device name, not path
attach-interface: --target silently drops strings with vnet* prefix
2012-06-18 13:14:49 +02:00
Wen Congyang
440b8ad181 virsh: allow the user to specify vmcore's format
Add a new parameter --memory-only for 'virsh dump' command. So
the user can decide the vmcore's format.
2012-06-15 20:36:14 +08:00
Laine Stump
1f145b2f0f network: fully support/use VIR_NETWORK_XML_INACTIVE flag
commit 52d064f42d added
VIR_NETWORK_XML_INACTIVE in order to allow suppressing the
auto-generated list of VFs in network definitions, and a --inactive
flag to virsh net-dumpxml to take advantage of the flag. However, it
missed out on two opportunities:

1) Use INACTIVE to get the current config of the network as it
   exists on disk, rather than the currently active config.

2) Add INACTIVE to the flags used for the virsh net-edit command, so
   that it won't include the forward-pool interfaces that were
   autogenerated, and so that a re-edit of the network prior to
   restarting it will show any other edits made since the last restart
   of the network. (prior to this patch, if you edited a network a 2nd
   time without restarting, all of the previous edits would magically
   disappear).

In order to fit with the new #define-based generic edit function in
virsh.c, a new function vshNetworkGetXMLDesc() was added. This
function first tries to call virNetworkGetXMLDesc with the INACTIVE
flag added, then retries without if the first attempt fails (in the
manner expected when the server doesn't support it).
2012-06-13 14:53:35 -04:00
Eric Blake
757c47635d snapshot: add 'virsh snapshot-info'
Expose the recent API additions in virsh.  Borrows ideas from 'dominfo'
for the general type of information to display.

Output looks like:

$ tools/virsh snapshot-info fedora-local tmp
Name:           tmp
Domain:         fedora-local
Current:        no
State:          disk-snapshot
Parent:         -
Children:       1
Descendants:    2
Metadata:       yes

possibly with fewer lines when talking to older servers.

* tools/virsh.c (cmdSnapshotInfo): New command.
* tools/virsh.pod (snapshot-info): Document it.
2012-06-11 11:55:00 -06:00
Eric Blake
1f06c007fe blockjob: add 'blockcopy' to virsh
Rather than further overloading 'blockpull', I decided to create a
new virsh command to expose the new flags of virDomainBlockRebase.

Blocking until the command completes naturally is pointless, since
the block copy job is intended to run indefinitely.  Instead, I
made the command support three --wait modes: by default, it runs until
mirroring is started; with --pivot, it pivots as soon as mirroring
is started; and with --finish, it aborts (for a clean copy) as
soon as mirroring is started.

* tools/virsh.c (VSH_CMD_BLOCK_JOB_COPY): New mode.
(blockJobImpl): Support new flags.
(cmdBlockCopy): New command.
(cmdBlockJob): Support new job info, new abort flag.
* tools/virsh.pod (blockcopy, blockjob): Document the new command
and flags.
2012-04-23 07:44:30 -06:00
Peter Krempa
b83d76d40e virsh: Fix and clarify the --title flag for the list command in man page 2012-04-19 14:19:58 +02:00
Eric Blake
3b96a89242 blockjob: add virsh blockpull --wait
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same.  I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop.  There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.

* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
2012-04-17 11:11:47 -06:00
Adam Litke
a696f8b71a blockjob: add API for async virDomainBlockJobAbort
Block job cancellation can take a while.  Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:

A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt.  Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel).  Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).

A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API.  When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.

This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-04-11 20:52:18 -06:00
Peter Krempa
cc5100654b virsh: Clarify use of the --managed-save flag for the list command
The documentation for the flag doesn't clearly state that the flag only
enhances the output and the user needs to specify other flags to list
inactive domains, that are enhanced by this flag.
2012-04-10 15:48:45 +02:00
Michal Privoznik
7960ce842b virsh: Clarify escape sequence
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
2012-04-03 17:03:53 +02:00
Eric Blake
3ff4b06968 snapshot: fix virsh docs
Commit d42a2ff forgot to touch up virsh documentation, and commit
4e9953a mis-spelled the option name.

* tools/virsh.pod (snapshot-create, snapshot-create-as): Fix typo
and match recent change in flag meaning.
2012-03-27 22:03:20 -06:00
Eric Blake
4d5533ca87 snapshot: add atomic create flag
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.

This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group.  If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.

There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure.  However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
2012-03-23 16:38:20 -06:00
Osier Yang
54d9026a2c New domain state pmsuspended
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
2012-03-23 23:12:22 +08:00
Dave Allan
350e6c5e66 Clarify virsh freecell manpage entry 2012-03-22 21:41:34 -06:00
Dave Allan
ceb1d36b94 Clarify what documentation is being referenced
virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation.  Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page.  This patch adds those URIs to several additional places
in the text.
2012-03-22 16:09:59 -04:00
Daniel P. Berrange
e457d5ef20 Allow overriding default URI in config file
Currently if the URI passed to virConnectOpen* is NULL, then we

 - Look for LIBVIRT_DEFAULT_URI env var
 - Probe for drivers

This changes it so that

 - Look for LIBVIRT_DEFAULT_URI env var
 - Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
 - Probe for drivers
2012-03-15 11:20:17 +00:00
Osier Yang
1e31b83560 virsh: Use option alias for outmoded "--persistent"
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".

tools/virsh.c: (use "--config", and "--persistent" is
    alias of "--config" now).
    cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
    cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
    cmdDetachInterface, cmdAttachDisk, cmdDetachDisk

toos/virsh.pod: Update docs of the changed commands, and
    add some missed docs for "--config" (detach-interface,
    detach-disk, and detach-device).
2012-03-09 13:21:01 +08:00
Eric Blake
210ed0e871 virsh: improve memory unit parsing
The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone.  And virsh is now useful for setting memory in units other
than KiB.

* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.
2012-03-07 18:24:45 -07:00
Eric Blake
ab95da4058 virsh: improve storage unit parsing
Now can now do:

virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M

to get both interfaces to resize to 10MiB.  The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.

The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.

* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.
2012-03-07 18:24:44 -07:00
Eric Blake
af3f9aabde virsh: add command aliases, and rename nodedev-detach
Just because our public API has a typo doesn't mean that virsh
has to keep the typo.

* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.
2012-03-07 18:24:44 -07:00
Eric Blake
3d150d328b virsh: use option aliases
Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.

Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.

* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.
2012-03-07 18:24:44 -07:00
Eric Blake
1c56b9fe53 virsh: add option aliases
In the past, we have created some virsh options with less-than-stellar
names.  For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output.  This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.

I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!

* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.
2012-03-07 18:24:44 -07:00
KAMEZAWA Hiroyuki
31047e2ba3 cpu-stats command shows cpu statistics information of a domain.
CPU0:
	cpu_time   88.231593093 seconds
CPU1:
	cpu_time   123.613341883 seconds
Total:
	cpu_time   211.844934976 seconds

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-03-06 21:54:48 -07:00
Eric Blake
ff4c25bae9 virsh: expose partial pull
Now virsh can call virDomainBlockRebase.

* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.
2012-02-29 13:44:20 -07:00
Alex Jia
096e9048ff docs: comments wiping supported algorithms
The current scrub version doesn't support pfitzner7, pfitzner33 and schneier
patterns on RHEL, we should comment it in virsh man page.

* tools/virsh.pod: update wiping algorithms docs.

Signed-off-by: Alex Jia <ajia@redhat.com>
2012-02-29 17:50:08 +08:00
Osier Yang
3aab4d7929 virsh: Break long lines in virsh.pod
No content changes, just breaking long lines.
2012-02-28 15:41:37 +08:00
Osier Yang
33855f5d04 virsh: New command cmdChangeMedia
One could use it to eject, insert, or update media of the CDROM
or floppy drive. See the documentation for more details.
2012-02-28 15:36:38 +08:00
Peter Krempa
afa4336e94 virsh: add support for VIR_DOMAIN_CONSOLE_* flags
This patch adds support for the newly introduced
VIR_DOMAIN_CONSOLE_FORCE and VIR_DOMAIN_CONSOLE_SAFE flags. The console
command now has an optional parameter --force that specifies that the
user wants to forcibly interrupt an ongoing console session and create
a new one. Flag --safe requests that the console should be opened only
if the hypervisor driver supports safe console handling.

The behaviour to this point was that the daemon opened two streams to
the console, that competed for data from the pipe, and the result was
that both of the consoles ended up scrambled.

This patch doesn't modify operation of other commands dealing with
console connections (start, create) as those open connections to newly
started domains making it virtually impossible for another client to race
for the console and steal it.

* tools/console.c:
        - add support for flag passthrough
* tools/console.h:
        - modify function prototypes to match impl.
* tools/virsh.c:
        - add flag --force for the console command
2012-02-27 15:05:17 +01:00
Michal Privoznik
a04d10f739 virsh: Expose virDomainPMWakeup 2012-02-27 11:44:10 +01:00
Jiri Denemark
0b7480e34e virsh: Add --unsafe option to migrate command 2012-02-23 14:23:26 +01:00
Peter Krempa
419e5fb3e6 virsh: Enhance list command to ease creation of shell scripts
This patch adds new options to the "virsh list" command enabling
filtering of persistent and transient domains along with the option to
print only UUIDs or names of domains instead of printing the table.

Option --name prints domain names (one per line) instead of the default
table. Similarly --uuid prints domain's UUID. The option --table is
an alias for the default behavior.

Aditionally --persistent and/or --transient may be specified to filter
the output of domains.
2012-02-22 12:12:13 +01:00
Peter Krempa
c4c68b0025 virsh: Fix docs for list command
Commit fad5cd2108 introduced option to
display domain's title in the list command output. There was a mistake
in the virsh man page example for this command stating --note instead of
--title.
2012-02-21 15:09:31 +01:00
Eric Blake
172d34298f qemu: make block io tuning smarter
When blkdeviotune was first committed in 0.9.8, we had the limitation
that setting one value reset all others.  But bytes and iops should
be relatively independent.  Furthermore, setting tuning values on
a live domain followed by dumpxml did not output the new settings.

* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Add parameter, and
update callers.
(qemuDomainSetBlockIoTune): Don't lose previous unrelated
settings.  Make live changes reflect to dumpxml output.
* tools/virsh.pod (blkdeviotune): Update documentation.
2012-02-13 10:34:25 -07:00
Michal Privoznik
78a7cb0d7a virsh: Fix name of domain suspend command
It's dompmsuspend, not suspend-duration.
2012-02-13 14:40:46 +01:00
Peter Krempa
4f89138bd1 virsh: Fix flag semantics and docs for "desc" command
This patch fixes the domain modification impact flags for tie virsh
desc command to match the new semantics and fix the docs to match
actual behavior.
2012-02-08 16:39:09 +01:00
Laine Stump
3e952ecc52 virsh: add --graceful switch to destroy command
This allows virsh to use the new VIR_DOMAIN_DESTROY_GRACEUL flag for
virDomainDestroyFlags.
2012-02-03 14:50:14 -05:00
Taku Izumi
2eaf71a6ab virsh: extension of virsh attach-disk for rawio
This patch extends "virsh attach-disk" command so that
we can specify "rawio" attribute.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2012-02-03 11:50:29 -05:00
Peter Krempa
fad5cd2108 virsh: Add support for modifying domain description and titles
This patch adds a new command "desc" to show and modify titles and
description for the domains using the new API.

This patch also adds a new flag for the "list" command to show titles in
the domain list, to allow easy identification of VMs by storing a short
description.

Example:
virsh # list --title
 Id Name                 State      Title
 -----------------------------------------------
   0 Domain-0             running    Mailserver 1
   2 fedora               paused
2012-02-01 15:12:53 -07:00
Jiri Denemark
e08d2a9ad8 virsh: Implement domblkerror command
This command lists all disk devices with errors
2012-02-01 10:56:45 +01:00
Michal Privoznik
7c741763db virsh: Expose new virDomainPMSuspendForDuration API
under new command "dompmsuspend"
2012-01-28 10:20:46 +01:00
Zeeshan Ali (Khattak)
6714fd04d2 resize: add virStorageVolResize() API
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.

Expose the new command via 'virsh vol-resize'.

Signed-off-by: Eric Blake <eblake@redhat.com>
2012-01-27 19:56:18 -07:00
Michal Privoznik
adb99a05b1 storage: Support different wiping algorithms
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
2012-01-26 13:59:30 +01:00
Eric Blake
7fb22418ff docs: fix virsh man page
Typo introduced in commit 4e9953a, and remained in 6fba577.

* tools/virsh.pod (snapshot-create): Fix pod error.
2012-01-25 22:20:18 -07:00
Michal Privoznik
6fba577e50 virsh: Expose new VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag
to cmdSnapshotCreate and cmdSnapshotCreateAs.
2012-01-25 10:59:41 +01:00
Daniel P. Berrange
17cfff6f17 Allow choice of shutdown method via virsh
Extend the 'shutdown' and 'reboot' methods so that they both
accept a new argument

    --mode acpi|agent

* tools/virsh.c: New args for shutdown/reboot
* tools/virsh.pod: Document new args
2012-01-24 12:19:51 +01:00
Taku Izumi
a3de9829d8 virsh: let domif-{get,set}link take target name
Other virsh domifXXX commands can accept target name
as a parameter to specify interface. From viewpoint of
consistency, virsh domif-getlink command should accept
target name as a parameter. This patch achieves this.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2012-01-20 16:53:36 -07:00
Osier Yang
5b4071333b virsh: Two new fields for command domblklist
Disk "type" and "device" are generally interesting stuff the
user may want to known, too. To not break any scripts which
parsed the output field, a new option "--details" is introduced
to output the two introduced fields.
2012-01-13 18:03:12 +08:00
Osier Yang
74e701f8e5 virsh: New command print summary of all virtual interfaces
Just like command "domblklist", the command extracts "type",
"source", "target", "model", and "MAC" of all virtual interfaces
from domain XML (live or persistent).
2012-01-12 17:42:02 +08:00
Shradha Shah
52d064f42d Added new option to virsh net-dumpxml called --inactive
The above option helps to differentiate between implicit and explicit
interface pools.
2012-01-11 13:15:09 -07:00
Eric Blake
4e9953a426 snapshot: allow reuse of existing files in disk snapshot
When disk snapshots were first implemented, libvirt blindly refused
to allow an external snapshot destination that already exists, since
qemu will blindly overwrite the contents of that file during the
snapshot_blkdev monitor command, and we don't like a default of
data loss by default.  But VDSM has a scenario where NFS permissions
are intentionally set so that the destination file can only be
created by the management machine, and not the machine where the
guest is running, so that libvirt will necessarily see the destination
file already existing; adding a flag will allow VDSM to force the file
reuse without libvirt complaining of possible data loss.

https://bugzilla.redhat.com/show_bug.cgi?id=767104

* include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.  Add
note about partial failure.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new
flag.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateXML): Implement the new flag.
2012-01-10 11:53:23 -07:00
Hu Tao
b2310b2913 domiftune: Enable the virDomain{S,G}etInterfaceParameters in virsh
Add a new command domiftune to get/set interface parameters.

* tools/virsh.c: implement the new command
* tools/virsh.pod: documentation of the new command
2011-12-29 18:29:25 +08:00
Satoru SATOH
1f24ddf6bf docs: Move 'echo' command description into the generic commands section
Virsh's echo command looks not having any relations with domains and its
description should go into the generic commands section instead of the
domain commands section (current).
2011-12-26 11:29:23 +08:00
Satoru SATOH
b2c545bf80 docs: Move 'send-key' command description into the domain commands section
Virsh's send-key command manipulates domains and its description should
go into the domain commands section instead of generic commands section
(current).
2011-12-26 11:21:24 +08:00
Michal Privoznik
74ad69b708 virsh: Use vshWatchJob in cmdManagedSave
This patch alters saving code, so we can report progress
and allow cancel via ^C.
2011-12-22 11:31:51 +01:00
Michal Privoznik
6e4c540d28 virsh: Use vshWatchJob in cmdSave
This patch alters saving code, so we can report progress
and allow cancel via ^C.
2011-12-22 11:31:24 +01:00
Michal Privoznik
5ccc7f6488 virsh: Use vshWatchJob in cmdDump
This patch alters dumping code, so we can report progress
and allow cancel via ^C.
2011-12-22 11:11:28 +01:00
Alex Jia
fbdfda14a1 docs: improve virsh domxml-*-native command docs
* tools/virsh.pod: improve virsh man page for domxml-from-native and
domxml-to-native commands.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-12-20 14:08:41 -07:00
Hu Tao
9da9a3b047 add new command numatune to virsh
add new command numatune to virsh to get/set numa parameters
2011-12-20 11:23:46 -07:00
Peter Krempa
3bb6bcfc79 virsh: Add option to undefine storage with domains
Add an option for virsh undefine command, to remove associated storage
volumes while undefining a domain. This patch allows the user to remove
associated (libvirt managed ) storage volumes while undefining a domain.

The new option --storage for the undefine command takes a string
argument that consists of comma separated list of target or source path
of volumes to be undefined. Volumes are removed after the domain has
been successfully undefined,

If a volume is not part of a storage pool, the user is warned to remove
the volume in question himself.

Option --wipe-storage may be specified along with this, that ensures
the image is wiped before removing.

Option --remove-all-storage enables the user to remove all storage. The
name is chosen long as the users should be aware what they're about to
do.
2011-12-16 11:42:12 +01:00
KAMEZAWA Hiroyuki
65aefae1a8 virsh: support multifunction in attach-disk
PCI <address...> can be specified by attach-disk but multifunction cannot
be specified. Add --multifunction support.
2011-12-13 16:15:20 -07:00
Eric Blake
972f7e6e49 docs: tweak 'virsh edit' wording
I was wondering why 'virsh edit' didn't support the same
'--inactive' option as 'virsh dumpxml'; reading the source
code showed that --inactive was already implied, and that
the only way to alter a running guest rather than affecting
next boot is by hot-plugging individual devices, or by
something complex like saving the guest and modifying the
save image.

* tools/virsh.pod (define, edit): Mention behavior when guest is
already running.
2011-12-13 15:58:43 -07:00
Michal Privoznik
7a79648532 virsh: Allow other escape characters for console
Currently virsh supports only ^] as escape character for console.
However, some users might want to use something else. This patch
creates such ability by specifying '-e' switch on virsh command
line.
2011-12-01 09:51:25 +01:00
Eric Blake
22cf6d46f4 qemu: amend existing table of device weights
Prior to this patch, for a running dom, the commands:

$ virsh blkiotune dom --device-weights /dev/sda,502,/dev/sdb,498
$ virsh blkiotune dom --device-weights /dev/sda,503
$ virsh blkiotune dom
weight         : 500
device_weight  : /dev/sda,503

claim that /dev/sdb no longer has a non-default weight, but
directly querying cgroups says otherwise:

$ cat /cgroup/blkio/libvirt/qemu/dom/blkio.weight_device
8:0     503
8:16    498

After this patch, an explicit 0 is required to remove a device path
from the XML, and omitting a device path that was previously
specified leaves that device path untouched in the XML, to match
cgroups behavior.

* src/qemu/qemu_driver.c (parseBlkioWeightDeviceStr): Rename...
(qemuDomainParseDeviceWeightStr): ...and use correct type.
(qemuDomainSetBlkioParameters): After parsing string, modify
rather than replacing existing table.
* tools/virsh.pod (blkiotune): Tweak wording.
2011-11-30 12:18:18 -07:00
Lei Li
e9bd9a0809 Enable the blkdeviotune command in virsh
Support virsh command blkdeviotune. Can set or query a block disk
I/O throttle setting.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:11 -07:00