Upcoming addition of a new field will need to make sure that SCSI disk
serial is tested as well. Add a case to one of the existing tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty
Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable
Forbid configurations where users would attempt to use cdroms in virtio
bus.
Fix few wrong examples which are not really relevant to the tested code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a specific test for testing the 'virtio-scsi'
controller and other tests which test a combination of scsi and non-scsi
devices this test no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.
Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming change will influence CDROM with cache mode so add a test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.
Fix the test case so that we can fix the algorithm next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.
Add XML formatter, parser, schema and docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a user configures the backing chain in the XML we should not ignore
it. We already do parse it but don't format it out. As a
safety-precaution don't attempt to format detected chain into the
inactive XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5> partially fixed
that issue but it introduced a somehow valid regression.
In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.
This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.
After this commit the following XML configuration is valid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
but this configuration remains invalid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
<page size='1048576' unit='KiB'/>
</hugepages>
</memoryBacking>
The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest. The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This use-case was broken by commit
<fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5>.
We allowed this configuration and it was working as expected therefore
we can consider it as regression. We should have never allowed such
configuration so now the best solution is in case of non-numa guest
silently ignore the 'nodeset' attribute if it's set to '0'.
That will be fixed by following patches.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This test case is currently working but it uncovers existing issue
in our code that the generated QEMU commandline uses the default 1G
hugepage instead of the 2M hugepage specified for exact node.
The issue in our code is that for non-numa guests we take into account
only the first hugepage. This will be fixed as invalid configuration
since it doesn't make any sense to set default and specific hugepage
for non-numa guest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove unnecessary XML elements as well.
<numatune> for numa guest is tested by numatune-memnode test.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From the args output you can see that the 'discard' feature is not
honored if you don't use hugepages, that is a bug, following patche
will fix it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There are couple of files that are the same in both
qemuxml2argvdata and qemuxml2xmloutdata directories. Link them
instead of having full copy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have several cases when a VM has multiple disks in the test files so
having another one without any interesting configuration is not
necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the authentication and ipv6 cases into the main test file. To allow
removal of the separate testing of the secure credential passing via the
'secret' object in qemu, use the DO_TEST_CAPS_VER macro with version
2.5.0 when the secret object is not supported by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xml2argv variant was unused. The xml2xml variant is redundant in
other tests for RBD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move various different iSCSI configuration into one test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'unsafe' cache test into 'disk-cache' and remove all the
individual cases for one cache mode each.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We also have disk-copy_on_read.xml which also tests the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we format the serial, geometry and error policy on the -drive
backend argument.
QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.
We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.
Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Add test case explicitly defining a smartcard host certificates
database via the following xml:
<smartcard mode='host-certificates'>
<database>/tmp/foo</database>
</smartcard>
This case is not currently covered in the test suite.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format probing will be dropped so remove the tests which will become
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the 'vxhs' suffix so other network protocols using TLS can be
put into the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk encryption part is no way relevant to the rest of the test so
drop it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The VM Generation ID is a mechanism to provide a unique 128-bit,
cryptographically random, and integer value identifier known as
the GUID (Globally Unique Identifier) to the guest OS. The value
is used to help notify the guest operating system when the virtual
machine is executed with a different configuration.
This patch adds support for a new "genid" XML element similar to
the "uuid" element. The "genid" element can have two forms "<genid/>"
or "<genid>$GUID</genid>". If the $GUID is not provided, libvirt
will generate one and save it in the XML.
Since adding support for a generated GUID (or UUID like) value to
be displayed modifying the xml2xml test to include virrandommock.so
is necessary since it will generate a "known" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
<features><vmcoreinfo/> is a bare boolean XML property. We don't really
use this format anymore and instead prefer tristate <X state=on|off/>
since it's required for modeling on/off/default. If for example future
qemu started enabling vmcoreinfo by default we wouldn't have any way
for the user to turn this off.
Convert it to tristate. For writing XML this is semanticly the same,
<vmcoreinfo/> is processed as <vmcoreinfo state='on'/>.
For apps reading guest XML this is technically an API change,
as they might misinterpret <vmcoreinfo state='off'/>, however this
has only been present in libvirt since 3.10.0 and I don't think any
apps are dependent on this yet
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:
<tpm model='tpm-crb'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though we just introduced the rom.enabled attribute to
properly cover the use case, there might be guests out there
that use the only previously available way of disabling PCI
ROM loading by not opting in to schema validation.
To make sure such guests will keep working going forward,
introduce a test case covering the legacy workaround.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.
Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
S390 guests can only support a virtio-gpu-ccw device as a video
device. So set default video model type to VIR_DOMAIN_VIDEO_TYPE_VIRTIO
for S390 guests.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
We're going to use the same test case to exercise all optional
pSeries features, so a more generic name is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Nobody should use format detection due to security implications. The
result of the change is that 'raw' format will be printed unless
specified explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This change catches an invalid use of the option in our
test suite.
https://bugzilla.redhat.com/show_bug.cgi?id=1483816
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This change catches an invalid use of the option in our
test suite.
https://bugzilla.redhat.com/show_bug.cgi?id=1483816
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.
access inside VM (for example)
Linux: /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
wirhin Windows PowerShell.
As an example, add the following to the guest XML
<chassis>
<entry name='manufacturer'>Dell Inc.</entry>
<entry name='version'>2.12</entry>
<entry name='serial'>65X0XF2</entry>
<entry name='asset'>40000101</entry>
<entry name='sku'>Type3Sku1</entry>
</chassis>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When no GIC version is specified, we currently default to GIC v2;
however, that's not a great default, since guests will fail to
start if the hardware only supports GIC v3.
Change the behavior so that a sensible default is chosen instead.
That basically means using the same algorithm whether the user
didn't explicitly enable the GIC feature or they explicitly
enabled it but didn't specify any GIC version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Account for the fact that the default might change based on what
GIC versions are supported by QEMU. That's not the case at the
moment, but it will be soon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When an implicit controller is added, the model is defined as -1
(IOW: undefined). So, if an implicit SCSI controller was added,
can set the model to the default value if the underlying hypervisor
supports it.
During post parse processing, let's force setting the controller
model to default value if not already set for defined controllers
(e.g. the non implicit ones).
These test cases are supposed to verify GIC support works as
expected, and shouldn't concern themselves with other features;
we can trim them down significantly, and make them less likely
to need updating after unrelated changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This wires up the previously added OEM strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.12 release
containing this patch:
commit 2d6dcbf93fb01b4a7f45a93d276d4d74b16392dd
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Sat Oct 28 21:51:36 2017 +0100
smbios: support setting OEM strings table
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 10c73bf1 fixed a bug that I had introduced back in commit
70249927 - if a vhost-scsi device had no manually assigned PCI
address, one wouldn't be assigned automatically. There was a slight
problem with the logic of the fix though - in the case of domains with
pcie-root (e.g. those with a q35 machinetype),
qemuDomainDeviceCalculatePCIConnectFlags() will attempt to determine
if the host-side PCI device is Express or legacy by examining sysfs
based on the host-side PCI address stored in
hostdev->source.subsys.u.pci.addr, but that part of the union is only
valid for PCI hostdevs, *not* for SCSI hostdevs. So we end up trying
to read sysfs for some probably-non-existent device, which fails, and
the function virPCIDeviceIsPCIExpress() returns failure (-1).
By coincidence, the return value is being examined as a boolean, and
since -1 is true, we still end up assigning the vhost-scsi device to
an Express slot, but that is just by chance (and could fail in the
case that the gibberish in the "hostside PCI address" was the address
of a real device that happened to be legacy PCI).
Since (according to Paolo Bonzini) vhost-scsi devices appear just like
virtio-scsi devices in the guest, they should follow the same rules as
virtio devices when deciding whether they should be placed in an
Express or a legacy slot. That's accomplished in this patch by
returning early with virtioFlags, rather than erroneously using
hostdev->source.subsys.u.pci.addr. It also adds a test case for PCIe
to assure it doesn't get broken in the future.
In virDomainDefMaybeAddHostdevSCSIcontroller when we add a new
controller because someone neglected to add one or we're adding
one because the existing one is full, we should copy over the
model number from the existing controller since whatever we
create should at least have the same characteristics as the one
we cannot use because it's full.
NB: This affects the existing hostdev-scsi-autogen-address test
which would add a default ('lsi') SCSI controller for the various
scsi_host's that would create a controller for the hostdev.
Commit id '70249927b' neglected to cover this case because the test
had taken the "shortcut" to already add the <address>; however, when
the PCI address assignment code was adjusted by commit id '70249927'
the vhost-scsi (VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) wasn't
covered thus returning a 0 for pciFlags. So I altered the tests too
to make sure it doesn't happen again.
Previously the qemuxml2xmloutdata was a softlink to the source
qemuxml2argvdata, so I unlinked and recreated the output file to
force generation of the adddress. Without the test changes, an
address generation returns:
libvirt: Domain Config error : internal error: Cannot automatically
add a new PCI bus for a device with connect flags 00
if an address was supplied in the test, a restart of libvirtd or
edit of a guest would display the following opaque message:
warning : qemuDomainCollectPCIAddress:1237 :
qemuDomainDeviceCalculatePCIConnectFlags() thinks that the device
with PCI address 0000:00:09.0 should not have a PCI address
where the address is related to the guest PCI address provided.
There's no reason for the files to have qemuxml2xmlout- prefix
since they all live under qemuxml2xmloutdata directory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that <serial> and <console> on s390/s390x behave a bit more like the
other architectures, remove this extra differentation, and use sclp
console by default for new guests. New virtio consoles can still be
added, and it is actually needed because of the limited number of
instances for sclp and sclplm.
This reverts commit b1c88c1476, whose
reasons are not totally clear.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Some test cases have the backend tag inside wrong interfaces. The backend xml
tag does not support <interface type='user|direct|hostdev'>. So this commit
changes some network types inside the interfaces that have backend defined.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.
Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the schema to allow a VxHS block device. Sample XML is:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
<serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
Update the html docs to describe the capability for VxHS.
Alter the qemuxml2xmltest to validate the formatting.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Alter the example to remove the <auth> from:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:1' mode='host'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdb' bus='virtio'/>
</disk>
and
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:2' mode='direct'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdc' bus='virtio'/>
</disk>
The reality is, it's not even used. For a <source pool> the authdef
from the storage source pool will supercede whatever is in the <disk>
definition during virStorageTranslateDiskSourcePool processing. In fact,
if the pool doesn't have/need authentication, then the authdef would
be removed anyway as the storage pool would be handling things.
The "proof" for this is in the adjustment to the test to add an
<auth> for a disk. The resulting .args file won't add what normally
would be added "myname:encodedpassword@" prior to the hostname in
the IQN (e.g. iscsi://myname:encodedpassword@iscsi.example.org:3260/...
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
During post parse, for any iSCSI disk or hostdev, scan the source
path looking for the presence of '/', if found, then we can assume
the LUN is provided. If not found, alter the input XML to add the
"/0". This will cause the generated XML to have the generated
value when the domain config is saved after post parse.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element. This is not extendable.
Use the new virXMLFormatElement() to properly format the source
element with possible child elements.
As a side effect it fixes a bug in disk source formatting.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
My commit 0c1d863 broke formatting of passthrough smartcard devices:
<smartcard mode='passthrough' type='spicevmc'/>
resulted in invalid XML:
<smartcard mode='passthrough'>
type='spicevmc'>
<address type='ccid' controller='0' slot='0'/>
</smartcard>
Split out chardev source formatting function into two -
one formatting the attributes and other formatting the subelements.
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
While using "definitely-not-virtio" as a model name is very
cute, it will also cause the relevant test to fail once we
introduce stricter validation.
Use "e1000", which is definitely not virtio but also a valid
model name, instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
PCI bus has to be numbered sequentially, and no index can be
missing, so libvirt will fill in the blanks automatically for
the user.
Up until now, it has done so using either pci-bridge, for machine
types based on legacy PCI, or pcie-root-port, for machine types
based on PCI Express. Neither choice is good for pSeries guests,
where PHBs (pci-root) should be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These tests demonstrate that, while it's now possible for the
user to create PHB explicitly and manually assign devices to
them, libvirt still defaults to extending the guest PCI
topology using PCI bridges and making suboptimal device
placement choices.
The next few commits will improve on these behaviors and the
tests outputs will automatically be updated to reflect this.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon need the new information; luckily,
we can figure it out automatically most of the time, so
users won't have to worry about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.
virStorageSourceNetworkDefaultPort does not need to be exported any
more.
Several cases have incidental <serial> or <console> XML which aren't
the features being tested for. Upcoming changes will cause some
churn here, so instead drop these bits now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This demonstrates that the previous qemu caps changes will use
-chardev for pci-serial on aarch64 machvirt
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of hugepage enabled domains for qemuxml2argvtest.
Unfortunately, often when adding a test case there I forget to
add it to xml2xml test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
Currently, we are querying for vhostuser interface name in post
parse callback. At that time interface might not yet exist.
However, it has to exist when starting domain. Therefore it makes
more sense to query its name at that point. This partially
reverts 57b5e27.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make the decision based on the usage of childBuf buffer.
This fixes the oddity in the test case introduced by commit c1c4d0d
where we would format an empty pair tag.
There are currently some limitations in the emulated GICv3
that make it unsuitable as a default. Use GICv2 instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption. Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.
The UNIX path isn't stored in config XML since libvirt-1.3.1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.
Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virt type for QEMU can be modified by -machine attribute "accel"
so there is no need to have different QEMU binary paths.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
We want pcie-root-ports to be used when available in QEMU,
but at the same time we need to ensure that hosts running
older QEMU releases keep working and that the user can
override the default at any time.
Add a comment for the original pcie-root-port test cases
to make it clear how these new test cases are different.
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up until a while ago, libvirt would automatically add a legacy
PCI controllers combo (dmi-to-pci-bridge + pci-bridge) to any
PCIe machine type (x86_64/q35 and aarch64/virt).
As a result, a number of input and output files in the test
suite ended up containing the legacy PCI controllers, even
though they are not needed or in any way relevant to the
feature being tested.
Get rid of most of the occurrences. Most of the time, this
just means removing the controllers from the input file and
regenerating the output files; in a few instances, some
minor tweaking is performed on the input file, most notably
removing the memory balloon: as memory balloon support was
not the scope of the test being changed, there is no loss
of test coverage from doing so.
Several occurrences of the legacy PCI controllers remain in
the test suite, both because removing their usage would have
required even more tweaking, and because we still want to
have coverage of this perfectly valid combination.
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)
New xml elements:
<memoryBacking>
<source type="file|anonymous"/>
<access mode="shared|private"/>
<allocation mode="immediate|ondemand"/>
</memoryBacking>
Not only we should set the MTU on the host end of the device but
also let qemu know what MTU did we set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.
Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.
If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).
(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)
virtio-pci is the way forward for aarch64 guests: it's faster
and less alien to people coming from other architectures.
Now that guest support is finally getting there (Fedora 24,
CentOS 7.3, Ubuntu 16.04 and Debian testing all support
virtio-pci out of the box), we'd like to start using it by
default instead of virtio-mmio.
Users and applications can already opt-in by explicitly using
<address type='pci'/>
inside the relevant elements, but that's kind of cumbersome and
requires all users and management applications to adapt, which
we'd really like to avoid.
What we can do instead is use virtio-mmio only if the guest
already has at least one virtio-mmio device, and use virtio-pci
in all other situations.
That means existing virtio-mmio guests will keep using the old
addressing scheme, and new guests will automatically be created
using virtio-pci instead. Users can still override the default
in either direction.
Existing tests such as aarch64-aavmf-virtio-mmio and
aarch64-virtio-pci-default already cover all possible
scenarios, so no additions to the test suites are necessary.
Since the great rework of how we store vcpu- and iothread-related
data, we have overly complex part of code that is trying to format the
scheduler tuning data in as less lines as possible by grouping
settings for multiple threads. That was designed as an input syntax
sugar for users, but we don't need to also use that when formatting
the XML. Switching to simple enumeration makes the code nicer,
shorter and more welcoming to future changes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
