https://bugzilla.redhat.com/show_bug.cgi?id=1448149
If a domain has no numa nodes, that means we don't put any
memory-backend-file onto the qemu command line. That in turn
means we can't set access='shared'. Therefore, we should produce
an error instead of ignoring the setting silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 2.7 and newer don't allow guests to start unless the initial
vCPUs count is a multiple of the vCPU hotplug granularity, so
validate it and report an error if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283700
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit id '70249927b' neglected to cover this case because the test
had taken the "shortcut" to already add the <address>; however, when
the PCI address assignment code was adjusted by commit id '70249927'
the vhost-scsi (VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) wasn't
covered thus returning a 0 for pciFlags. So I altered the tests too
to make sure it doesn't happen again.
Previously the qemuxml2xmloutdata was a softlink to the source
qemuxml2argvdata, so I unlinked and recreated the output file to
force generation of the adddress. Without the test changes, an
address generation returns:
libvirt: Domain Config error : internal error: Cannot automatically
add a new PCI bus for a device with connect flags 00
if an address was supplied in the test, a restart of libvirtd or
edit of a guest would display the following opaque message:
warning : qemuDomainCollectPCIAddress:1237 :
qemuDomainDeviceCalculatePCIConnectFlags() thinks that the device
with PCI address 0000:00:09.0 should not have a PCI address
where the address is related to the guest PCI address provided.
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Remove the disk and the .args file since the expectation is the test
will fail in qemuxml2argvtest because floppy is not supported on pseries
and thus no disk is necessary and no .args file would be created to
compare against.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Similarly to the previous commit, rename .args files.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that <serial> and <console> on s390/s390x behave a bit more like the
other architectures, remove this extra differentation, and use sclp
console by default for new guests. New virtio consoles can still be
added, and it is actually needed because of the limited number of
instances for sclp and sclplm.
This reverts commit b1c88c1476, whose
reasons are not totally clear.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Qemu has now an internal mechanism for locking images to fix specific
cases of disk corruption. This requires libvirt to mark the image as
shared so that qemu lifts certain restrictions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378242
Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
Some test cases have the backend tag inside wrong interfaces. The backend xml
tag does not support <interface type='user|direct|hostdev'>. So this commit
changes some network types inside the interfaces that have backend defined.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
Just like in 9324f67a57 we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
When testing user aliases it was discovered that for 440fx
machine type which has default IDE bus builtin, domain cannot
start if IDE controller has the user provided alias. This is
because for 440fx we don't put the IDE controller onto the
command line (since it is builtin) and therefore any device that
is plugged onto the bus must use the default alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In some cases management application needs to allocate memory for
qemu upfront and then just let qemu use that. Since we don't want
to expose path for memory-backend-file anywhere in the domain
XML, we can generate predictable paths. In this case:
$memoryBackingDir/libvirt/qemu/$shortName/$alias
where $shortName is result of virDomainDefGetShortName().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.
Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.
Original implementation used 'SocketAddress' equivalent from qemu for
the disk server field, while qemu documentation specifies
'InetSocketAddress'. The backing store parser uses the correct parsing
function but the formatter used the incorrect one (and also with the
legacy mode enabled which was wrong).
The qemuxml2argvtest expects the domain XMLs to be inactive ones.
Therefore we should pass inactive XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
The default_tls_x509_verify (and related) parameters in qemu.conf
control whether the QEMU TLS servers request & verify certificates
from clients. This works as a simple access control system for
servers by requiring the CA to issue certs to permitted clients.
This use of client certificates is disabled by default, since it
requires extra work to issue client certificates.
Unfortunately the code was using this configuration parameter when
setting up both TLS clients and servers in QEMU. The result was that
TLS clients for character devices and disk devices had verification
turned off, meaning they would ignore errors while validating the
server certificate.
This allows for trivial MITM attacks between client and server,
as any certificate returned by the attacker will be accepted by
the client.
This is assigned CVE-2017-1000256 / LSN-2017-0002
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Somewhere around commit 9ff9d9f reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc2014.
Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge
https://bugzilla.redhat.com/show_bug.cgi?id=1460143
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The test suite has hardcoded /etc/pki/qemu as the cert dir, but this
only works if configure has --sysconfdir=/etc passed. We must set the
vxhs cert dir to a stable path in the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VxHS block device will only use the newer formatting options and
avoid the legacy URI syntax.
An excerpt for a sample QEMU command line is:
-drive file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update qemuxml2argvtest with a simple test.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the schema to allow a VxHS block device. Sample XML is:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
<serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
Update the html docs to describe the capability for VxHS.
Alter the qemuxml2xmltest to validate the formatting.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Add a couple of tests to "validate" checks in domain_conf that either
a missing secrettype (CONFIG_UNSUPPORTED) or an mismatched secrettype
of ceph for an iSCSI disk (INTERNAL_ERROR) will cause a parsing error.
Alter the example to remove the <auth> from:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:1' mode='host'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdb' bus='virtio'/>
</disk>
and
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:2' mode='direct'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdc' bus='virtio'/>
</disk>
The reality is, it's not even used. For a <source pool> the authdef
from the storage source pool will supercede whatever is in the <disk>
definition during virStorageTranslateDiskSourcePool processing. In fact,
if the pool doesn't have/need authentication, then the authdef would
be removed anyway as the storage pool would be handling things.
The "proof" for this is in the adjustment to the test to add an
<auth> for a disk. The resulting .args file won't add what normally
would be added "myname:encodedpassword@" prior to the hostname in
the IQN (e.g. iscsi://myname:encodedpassword@iscsi.example.org:3260/...
