If you ran virsh in interactive mode and ran a command
that virsh could not parse, it would then SEGV
on subsequent commands. The problem is that we are
freeing the vshCmd structure in the syntaxError label
at the end of vshCommandParse, but forgetting to
set ctl->cmd to NULL. This means that on the next command,
we would try to free the same structure again, leading
to badness.
* tools/virsh.c: Make sure to set ctl->cmd to NULL after
freeing it in vshCommandParse()
No functional change. These all generated compiler warnings which, for
some reason weren't converted to errors by
--enable-compiler-warnings=error.
* tools/virsh.c:
- change return type from int to void on two functions that don't
return a value.
- remove unused variables/labels from two functions
- eliminate non-literal format strings
- typecast char* into xmlChar* when calling
- xmlParseBalancedChunkMemory
Currently if you dump the core of a qemu guest with
qemudDomainCoreDump, subsequent commands will hang
up libvirtd. This is because qemudDomainCoreDump
uses qemuDomainWaitForMigrationComplete, which expects
the qemuDriverLock to be held when it's called. This
patch does the simple thing and moves the qemuDriveUnlock
to the end of the qemudDomainCoreDump so that the driver
lock is held for the entirety of the call (as it is done
in qemudDomainSave). We will probably want to make the
lock more fine-grained than that in the future, but
we can fix both qemudDomainCoreDump and qemudDomainSave
at the same time.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The code to add job support into libvirtd caused a problem
in qemudDomainSetVcpus. In particular, a qemuDomainObjEndJob()
call was added at the end of the function, but a
corresponding qemuDomainObjBeginJob() was not. Additionally,
a call to qemuDomainObj{Enter,Exit}Monitor() was also missed
in qemudDomainHotplugVcpus(). These missing calls conspired to
cause a hang in the libvirtd process after the command was
finished. Fix this by adding the missing calls.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
As previously discussed[1], this patch removes the
qemudDomainSetMaxMemory() function, since it doesn't
work. This means that instead of getting somewhat
cryptic errors, you will now get:
error: Unable to change MaxMemorySize
error: this function is not supported by the hypervisor: virDomainSetMaxMemory
Which describes the situation perfectly.
[1] https://www.redhat.com/archives/libvir-list/2010-February/msg00928.html
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When using the JSON monitor, qemuMonitorJSONExtractCPUInfo
was returning 0 on success. Unfortunately, higher levels of
the cpuinfo code expect that it returns the number of CPUs
it found on success. This one-line patch fixes it so that
it returns the correct number. This makes "virsh vcpuinfo <domain>"
work when using the JSON monitor.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* autogen.sh (curr_status): Also include hash of bootstrap.conf
when checking for changes that require bootstrap rerun.
* cfg.mk (_update_required): Likewise.
Since cppi is not part of Fedora Core 12, the check is conditional:
without cppi, running 'make syntax-check' merely warns:
$ make sc_preprocessor_indentation
preprocessor_indentation
maint.mk: skipping test sc_preprocessor_indentation: cppi not installed
* cfg.mk (sc_preprocessor_indentation): New syntax-check rule.
(preprocessor_exempt): New macro, with first exemption.
This is a stop-gap measure to make autogen.sh rerun ./bootstrap,
(required due to recent bootstrap.conf addition) while we prepare
the fix to automatically detect the case of an updated modules list.
When the daemon libvirtd restarts, a connected virsh gets a SIGPIPE
and dies. This change the behaviour to try to reconnect if the
signal was received or command error indicated a connection or RPC
failure. Note that the failing command is not restarted.
* tools/virsh.c: catch SIGPIPE signals as well as connection related
failures, add some automatic reconnection code and appropriate error
messages.
As pointed out by eblake, I made a real hash of the
nodeinfo code with commit
aa2f6f96dd. This patch
cleans it up:
1) Do more work at compile time instead of runtime (minor)
2) Properly handle the hex digits that come from
/sys/devices/system/cpu/cpu*/topology/thread_siblings
3) Fix up some error paths that could cause SEGV
4) Used unsigned's for the cpu numbers (cpu -1 doesn't
make any sense)
Along with the recent patch from jdenemar to zero out
the nodeinfo structure, I've re-tested this on the
machines having the problems, and it seems to be good.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Having a single logrotate configuration file for all hypervisors
did not work as logrotate would get confused if an hypervisor not
supported on that platform was still listed. Simplest is to split
the logrotate as separate per hypervisor files and change the
spec file to only install the ones compiled in.
* daemon/libvirtd.lxc.logrotate.in daemon/libvirtd.qemu.logrotate.in
daemon/libvirtd.uml.logrotate.in: copy and split the original
daemon/libvirtd.logrotate.in file
* daemon/Makefile.am: update to support the different files and
cleanup in sed suggested by Eric Blake
* libvirt.spec.in: only install the relevant logrotate configs
* daemon/.gitignore: update logrotate generated list
With N_() in place, we can use it for a smaller file.
* doc/api-extension/0008-Step-8-of-8-Add-virsh-support.patch:
Replace all uses of gettext_noop with N_.
* tools/virsh.c: Likewise, throughout the file.
It is a bad idea to call gettext on an already-translated
string. In cases where a string must be translated separately
from where it is exposed to xgettext, the gettext manual
recommends the idiom of N_() wrapping gettext_noop for
marking the string.
* src/internal.h (N_): Fix definition to match gettext manual.
* tools/virsh.c: (cmdHelp, cmdList, cmdDomstate, cmdDominfo)
(cmdVcpuinfo, vshUsage): Replace incorrect use of N_ with _.
(vshCmddefHelp): Likewise. Mark C format strings appropriately.
The nodeinfo structure wasn't initialized in qemu driver and with the
recent change in CPU topology parsing, old value of nodeinfo->sockets
could be used and incremented giving totally bogus results.
Let's just wipe the structure completely.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A few more non-literal format strings in error log messages have crept
in. Fix them in the standard way - turn the format string into "%s"
with the original string as the arg.
If a special cache strategy for a disk has been specified in a domain
definition, but no driverName has been set, virDomainGetXMLDesc would not
include the <driver> tag at all.
* src/conf/domain_conf.c: make sure any <driver> tag setting is
serialized if set.
The current code for "nodeinfo" is pretty naive
about socket and thread information. To determine the
sockets, it just takes the number of cpus and divides
by the number of cores. For the thread count, it always
sets it to 1. With more recent Intel machines, however,
hyperthreading is again an option, meaning that these
heuristics no longer work and give bogus numbers. This
patch goes through /sys to get the additional
information so we properly report it.
Note that I had to edit the tests not to report on
socket and thread counts, since these are determined
dynamically now.
v2: As pointed out by Eric Blake, gnulib provides
count-one-bits (which is LGPLv2+). Use it instead
of a hand-coded popcnt.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When adding domainMemoryStats API support for the qemu driver, I didn't
follow the locking rules exactly. The job condition must be held when
executing monitor commands. This corrects the segfaults I was seeing
when calling domainMemoryStats in a multi-threaded environment.
* src/qemu/qemu_driver.c: in qemudDomainMemoryStats() add missing
calls to qemuDomainObjBeginJob/qemuDomainObjEndJob
doTunnelSendAll function (used by QEMU migration) uses a 64k buffer on
the stack, which could be problematic. This patch replaces that with a
buffer from the heap.
While in the neighborhood, this patch also improves error reporting in
the case that saferead fails - previously, virStreamAbort() was called
(resetting errno) before reporting the error. It's been changed to
report the error first.
* src/qemu/qemu_driver.c: fix doTunnelSendAll() to use a malloc'ed
buffer
* src/qemu/qemu_driver.c (qemudDomainAttachSCSIDisk): Handle
the (theoretical) case of an empty controller list, so that
clang does not think the subsequent dereference of "cont"
would dereference an undefined variable (due to preceding
loop not iterating even once).
* src/qemu/qemu_driver.c (qemudDomainRestore): A corrupt save file
(in particular, a too-large header.xml_len value) would cause an
unwarranted out-of-memory error. Do not trust the just-read
header.xml_len. Instead, merely use that as a hint, and
read/allocate up to that number of bytes from the file.
Also verify that header.xml_len is positive; if it were negative,
passing it to virFileReadLimFD could cause trouble.
to saferead_lim, which interprets it as a size_t.
* src/util/util.c (virFileReadLimFD): Do not malfunction when
maxlen < -1. Return -1,EINVAL in that case. Handle maxlen==0
in the same manner.
* src/xen/proxy_internal.c (xenProxyDomainDumpXML): An invalid packet
could include a too-large "ans.len" value, which would make us allocate
too much memory and then copy data from beyond the end of "ans",
possibly evoking a segfault. Ensure that the value we use is no
larger than the remaining portion of "ans".
Also, change unnecessary memmove to memcpy (src and dest obviously
do not overlap, so no need to use memmove).
(xenProxyDomainGetOSType): Likewise.
(xenProxyGetCapabilities): Likewise.
The code erroneously searched the entire "reply" for a comma, when
its intent was to search only that portion after "balloon: actual="
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetMemoryStats):
Search for "," only starting *after* the BALLOON_PREFIX string.
Otherwise, we'd be more prone to false positives.
* configure.ac libvirt.spec.in: update with new version
* docs/news.html.in: add list of changes in 0.7.7
* po/*po*: updated spanish and russian localisations, rebuilt
Changeset
commit 5073aa994a
Author: Cole Robinson <crobinso@redhat.com>
Date: Mon Jan 11 11:40:46 2010 -0500
Added support for product/vendor based passthrough, but it only
worked at the security driver layer. The main guest XML config
was not updated with the resolved bus/device ID. When the QEMU
argv refactoring removed use of product/vendor, this then broke
launching guests.
THe solution is to move the product/vendor resolution up a layer
into the QEMU driver. So the first thing QEMU does is resolve
the product/vendor to a bus/device and updates the XML config
with this info. The rest of the code, including security drivers
and QEMU argv generated can now rely on bus/device always being
set.
* src/util/hostusb.c, src/util/hostusb.h: Split vendor/product
resolution code out of usbGetDevice and into usbFindDevice.
Add accessors for bus/device ID
* src/security/virt-aa-helper.c, src/security/security_selinux.c,
src/qemu/qemu_security_dac.c: Remove vendor/product from the
usbGetDevice() calls
* src/qemu/qemu_driver.c: Use usbFindDevice to resolve vendor/product
into a bus/device ID
The pci_del command is not being ported to QMP. Convert all the
QEMU hotplug code over to use device_del whenever it is available
to avoid the pci_del problem
* src/qemu/qemu_driver.c: Convert unplug code to device_del
Previously hot-unplug could not be supported for USB devices
in QEMU, since usb_del required the guest visible address
which libvirt never knows. With 'device_del' command we can
now unplug based on device alias, so support that.
* src/qemu/qemu_driver.c: Use device_del to remove USB devices
Upstart crashes & burns in a heap if $TERM environment variable
is missing. Presumably the kernel always sets this when booting
init on a real machine, so libvirt should set it for containers
too.
To make a typical inittab / mingetty setup happier, we need to
symlink the primary console /dev/pts/0 to /dev/tty1.
Improve logging in certain scenarios to make troubleshooting
easier
* src/lxc/lxc_container.c: Create /dev/tty1 and set $TERM
When using the 'ns' cgroup controller, the moment a process calls
'unshare(CLONE_NEWNS)', it will be given a private cgroup tree
under its current location. This really messages up the LXC
controller process, because it ends up creating the containers'
cgroup in the wrong place. The fix is fairly easy, just move
the cgroup setup before the code which calls unshare(). The
'ns' controller will still create extra undesired cgroups, but
they at least won't break libvirt's setup now.
The patch also adds a missing cgroups allow rule for /dev/tty
device node
When getting the driver/domain cgroup it is possible to specify
whether it should be auto created. If auto-creation was turned
off, libvirt still mistakenly created its own top level cgroup
* src/util/cgroup.c: Honour autocreate flag for top level cgroup
