Extend the TPM backend XML with a node 'active_pcr_banks' that allows a
user to specify the PCR banks to activate before starting a VM. Valid
choices for PCR banks are sha1, sha256, sha384 and sha512. When the XML
node is provided, the set of active PCR banks is 'enforced' by running
swtpm_setup before every start of the VM. The activation requires that
swtpm_setup v0.7 or later is installed and may not have any effect
otherwise.
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'>
<active_pcr_banks>
<sha256/>
<sha384/>
</active_pcr_banks>
</backend>
</tpm>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2016599
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed one function inside virpcivpd.c, namely
virPCIVPDParseVPDLargeResourceFields() that declares some
variables at the top level even though they are used only inside
a loop in which they have to be freed explicitly.
Bringing variable declarations into the loop allows us to make
the code nicer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
While invalid values need to be ignored when presenting VPD data to the
user, it would be good to attempt to parse a valid portion of the VPD
instead of marking it invalid as a whole.
Based on a mailing list discussion, the set of accepted characters is
extended to the set of printable ASCII characters.
https://listman.redhat.com/archives/libvir-list/2021-October/msg01043.html
The particular example encountered on real hardware was multi-faceted:
* "N/A" strings present in read-only fields. This would not be a useful
valid value for a field (especially if a unique serial number is
expected), however, it was decided to delegate handling of those kinds
of values to higher-level software;
* "4W/1W PCIeG2x4" - looks like some vendors use even more printable
characters in the ASCII range than we currently allow. Since the
PCI/PCIe VPD specs mention alphanumeric characters without specifying
the full character set, it looks like this is ambiguous for vendors
and they tend to use printable ASCII characters;
* 0xFF bytes present in VPD-W field values. Those bytes do not map to
printable ASCII code points and were probably used by the vendor as
placeholders. Ignoring the whole VPD because of that would be too
strict.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
* RV and RW fields must be at the last position in their respective
section (per the conditions in the spec). Therefore, the parser now
stops iterating over fields as soon as it encounters one of those
fields and checks whether the end of the resource has been reached;
* The lack of the RW field is not treated as a parsing error since we
can still extract valid data even though this is a PCI/PCIe VPD spec
violation;
* Individual fields must have a valid length - the parser needs to check
for invalid length values that violate boundary conditions of the
resource.
* A zero-length field may be the last one in the resource, however, the
boundary check is currently too strict to allow that.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
For other interface type, values in tc rules are calculated by
multiply by 8*1000 instead of 8*1024.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When 'swtpm_setup --print-capabilities' shows the 'tpm12-not-need-root'
flag, then it is possible to create certificates for the TPM 1.2 also
in non-privileged mode since swtpm_setup doesn't need tcsd anymore.
Check for this flag and create the certificates if this flag is found.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases the worker func running inside the pool may rely on
virIdentity. While worker func could check for identity and set
one it is not optimal - it may not have access to the identity of
the thread creating the pool and thus would have to call
virIdentityGetSystem(). Allow passing identity when creating the
pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's only used once and open coding it is at least as clear as using the
macro.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few places we declare a variable (which is optionally
followed by a code not touching it) then set the variable to a
value and return the variable immediately. It's obvious that the
variable is needless and the value can be returned directly
instead.
This patch was generated using this semantic patch:
@@
type T;
identifier ret;
expression E;
@@
- T ret;
... when != ret
when strict
- ret = E;
- return ret;
+ return E;
After that I fixed couple of formatting issues because coccinelle
formatted some lines differently than our coding style.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add helper functions to virpci to provide means of checking for a VPD
file presence and for VPD resource retrieval using the PCI VPD parser.
The added test assesses the basic functionality of VPD retrieval while
the full parser is tested by virpcivpdtest.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Add support for deserializing the binary PCI/PCIe VPD format and storing
results in memory.
The VPD format is specified in "I.3. VPD Definitions" in PCI specs
(2.2+) and "6.28.1 VPD Format" PCIe 4.0. As section 6.28 in PCIe 4.0
notes, the PCI Local Bus and PCIe VPD formats are binary compatible
and PCIe 4.0 merely started incorporating what was already present in
PCI specs.
Linux kernel exposes a binary blob in the VPD format via sysfs since
v2.6.26 (commit 94e6108803469a37ee1e3c92dafdd1d59298602f) which requires
a parser to interpret.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Using swtpm v0.7.0 we can run swtpm_setup to create default config files
for swtpm_setup and swtpm-localca in session mode. Now a user can start
a VM with an attached TPM without having to run this program on the
command line before. This program needs to run once.
This patch addresses the issue raised in
https://bugzilla.redhat.com/show_bug.cgi?id=2010649
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
For conversion of '-device' we'll try to avoid usage of arrays if
possible, so for now if the array coversion function is not provided the
convertor will error out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With automatic memory freeing we can simplify the function to avoid two
almost-identical calls to virQEMUBuildCommandLineJSONRecurse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The returned argument list is a NULL-terminated string list and the only
caller doesn't use the count. Remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Optimize the number of string copies by using the virBuffers in the
callers directly. Simplest way to achieve this is to just open code the
one function call 'virQEMUBuildDriveCommandlineFromJSON' was wrapping
in the two callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that everything was replaced by the new code we can remove this
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the JSON output on a regular capability flag rather than purely
internal flag. This will prepare for the time when QEMU will accept JSON
argumets for -netdev.
For now the capability is not set (thus we for now don't have QMP
schema validation) but that will be addressed later.
To achieve this 'qemuBuildNetdevCommandlineFromJSON' is introduced
and all callers of 'virQEMUBuildNetdevCommandlineFromJSON' are
refactored to use the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enforce that the ':' separator between the key and value is always
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In many cases we use a signed value, but use the sign to note that it
was not assigned. For converting to JSON objects it will be handy to
have possibility to do this automatically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When a server decides to close a client, the
virNetServerClientCloseLocked() is called. In here various
cleanup steps are taken, but the most important part (from this
commit's POV at least) is the way that the socket is closed.
Firstly, removal of the socket associated with the client from
the event loop is signalized and then the socket is unrefed. The
socket is not closed just yet though, because the event loop
holds a reference to it. This reference will be freed as soon as
the event loop wakes up and starts issuing callbacks (in this
case virNetSocketEventFree()).
So far, this is how things usually work. But if the daemon
reaches the number of opened files limit, things start to work
differently.
If the RLIMIT_NOFILE limit is reached and there's a client that
wants to connect then the event loop wakes up, sees POLLIN on the
socket and calls virNetServerServiceAccept() which in turn calls
virNetSocketAccept(). But because of the limit, accept() fails
with EMFILE leaving the POLLIN event unhandled. The dispatch then
continues to next FDs with events on them. BUT, it will NOT call
the socket removal callback (virNetSocketEventFree()) because it
has low priority (G_PRIORITY_DEFAULT_IDLE). Per glib's
documentation:
* Each event source is assigned a priority. The default priority,
* %G_PRIORITY_DEFAULT, is 0. Values less than 0 denote higher priorities.
* Values greater than 0 denote lower priorities. Events from high priority
* sources are always processed before events from lower priority sources.
and per g_idle_add() documentation:
* Adds a function to be called whenever there are no higher priority
* events pending to the default main loop. The function is given the
* default idle priority, %G_PRIORITY_DEFAULT_IDLE.
Now, because we did not accept() the client we are constantly
seeing POLLIN on the main socket and thus the removal of the
client socket won't ever happen.
The fix is to set at least the same priority as other sources,
but since we want to just close an FD, let's give it the highest
priority and call it before handling other events.
This issue can be easily reproduced, for instance:
# ulimit -S -n 40 (tweak this number if needed)
# ./src/libvirtd
from another terminal:
# for ((i=0; i<100; i++)); do virsh list & done; virsh list
The last `virsh list` must not get stuck.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007168
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
New virHostMemGetTHPSize() is introduced which allows caller to
obtain THP PMD (Page Middle Directory) size, which is equal to
the minimal size that THP can use, taken from kernel doc
(Documentation/admin-guide/mm/transhuge.rst):
Some userspace (such as a test program, or an optimized memory allocation
library) may want to know the size (in bytes) of a transparent hugepage::
cat /sys/kernel/mm/transparent_hugepage/hpage_pmd_size
Since this size depends on the host architecture and the kernel
it won't change whilst libvirtd is running. Therefore, we can use
virOnce() and cache the value. Of course, we can be running under
kernel that has THP disabled or has no notion of THP at all. In
that case a negative value is returned to signal error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It always returns true. Make the logic a bit simpler to see through.
This completely removes 'virCryptoHaveCipher' as it's pointless in the
current form.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Due to the way we detect programs at runtime there's no
difference between $PROG and $PROG_PATH macros that come from
meson-config.h. Either both are set to the path found during
configure or both are set to just "$prog", e.g.:
#define EBTABLES "/sbin/ebtables"
#define EBTABLES_PATH "/sbin/ebtables"
#define FLAKE8 "flake8"
#define FLAKE8_PATH "flake8"
Change those few places which use _PATH.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Of the two callers one simply iterates over the returned paths and the
second one appends the returned paths to another linked list. Simplify
all of this by directly returning a linked list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two distinct uses of an arbitrary buffers size when querying
the device mapper. One is related to loading the /proc/devices file,
while the other is used as buffer for ioctls to the devmapper.
Split up the macros used here so that it's clear that they are not meant
for the same thing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the unlikely case that we were unable to set the new
identity, we would unref the old one even though it still
could be in the thread-local storage.
Fixes: c6825d88137cb8e4debdf4310e45ee23cb5698c0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Clang on Rawhide started to complain that @tmp variable in
virSCSIDeviceListDel() is set but not used. This is obviously a
false positive because the variable is used to free device stolen
from the list. Anyway, we can do without the variable so in this
specific case let's fix our code to appease Clang.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virPCIDeviceIsBehindSwitchLackingACS() function checks
whether given PCI device is not behind a switch that lacks ACS.
It does so by starting at given device and traversing up, one
parent at time towards the root. The parent device is obtained
via virPCIDeviceGetParent() which allocates new virPCIDevice
structure. For freeing the structure we use g_autoptr() and a
temporary variable @tmp. However, Clang fails to understand our
clever algorithm and complains that the variable is set but never
used. This is obviously a false positive, but using a small trick
we can shut Clang up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Simon Rowe <simon.rowe@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using 'virsh freepages' or 'virsh allocpages' then
virHostMemGetFreePages() or virHostMemAllocPages() is called,
respectively. But the following may happen: libvirt was built
without numactl support and thus a fake NUMA node was constructed
for capabilities, which means that startCell is going to be 0.
But we can't blindly pass startCell = 0 to virNumaGetPageInfo()
nor virNumaSetPagePoolSize() because they would operate over node
specific path (/sys/devices/system/node/nodeX) rather than NUMA
agnostic path (/sys/kernel/mm/hugepages/) and we are not
guaranteed that the former exists (kernel might have been built
without NUMA support).
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1978574
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemAllocPages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemGetFreePages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When setting O_CLOEXEC flag on received FD fails the FD is closed
using VIR_FORCE_CLOSE(). But the call is wrapped in errno save
which is not necessary because VIR_FORCE_CLOSE() preserves errno
value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Warn these error instead of return when removing qos or queues. This will
avoid residual qos clearance on multiple interfaces.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate virNetDevOpenvswitchInterfaceClearQos into two steps. When setting
qos, we can set only rx or tx and the other one should be cleared.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add vmuuid notes on virNetDevOpenvswitchInterfaceSetQos,
and change vmid to vmuuid.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For new feature Fibre Channel VMID we will need to get inode of the
VM root cgroup as it is used in the new kernel API together with VMID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We need this in order to validate XML against schema at one
place, rather than have the same code for validation in different
functions.
I will add '--validate' option to more virsh commands soon and
this makes it easier as virXMLParse() is called in every one I
plan to change.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
