libvirt-guests.sh when run with more active guests than requested to
shut down in parallel will run until it times out only shutting down
the first set of guests.
This patch fixes parallel shutdown by fixing a variable scope issue
where check_guests_shutdown unintentionally reset $guests which
prevented further progress.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1688508
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Instead of appearing as one long paragraph, split the output to list
each command option on its own line for better readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-path volume pool', or
'virsh vol-name volume pool', or 'virsh vol-key volume'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-info volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-dumpxml volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-wipe volume pool algorithm'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-download volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-upload volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-delete volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-clone source-vol target-vol pool'.
While making the modification clean up the description a bit too in
order to help clarify under what circumstances the source-vol could be
found if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clean up the formatting to make the output a bit more readable at
least with respect to not having one paragraph of output. Each
option will start on its own line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We can use:
domifaddr f26-cloud --source arp
to get the address.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to provide the adapter parent_wwnn and parent_wwpn
or the parent_fabric_wwn on the virsh command line for the pool
define/create as commands. Update the virsh.pod description.
Signed-off-by: John Ferlan <jferlan@redhat.com>
One short sentence won't do it justice, but it could help by listing
scsi_hostN and vHBA to point one in the right direction.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The description was missing the wwnn and wwpn names for the
--adapter-wwnn and --adapter-wwpn switches. Just add it to be
clear that the fields cannot be empty (IOW they are not boolean).
Signed-off-by: John Ferlan <jferlan@redhat.com>
so it's not affected by flags that might be passed in $(*_LIBS) like
-L/usr/lib which might result in linking against system library and
requiring incorrect version of private symbols
Signed-off-by: Jan Palus <atler@pld-linux.org>
Currently if cmd->skipChecks is set (done only from completers)
some basic checks are skipped because we're working over
partially parsed command. See a26ff63ae4 for more detailed
explanation. Anyway, the referenced commit was too aggressive in
disabling checks and effectively returned success even in clear
case of failure. For instance:
# domif-getlink --interface <TAB><TAB>
causes virshDomainInterfaceCompleter() to be called, which calls
virshDomainGetXML() which eventually calls
vshCommandOptStringReq(.., name = "domain"); The --domain
argument is required for the command and if not present -1 should
be returned to tell the caller the argument was not found. Well,
zero is returned meaning the argument was not found but it's not
required either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The commands which requires a pool to perform any action for a volume is
throwing a segfault when you pass the volume name before a pool name or
without the argument '--pool'.
An example that works:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info --pool loops-pool lo<TAB>
An example that does not work:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info lo<TAB>
Segmentation Fault
The example 'vol-info' can be executed as 'vol-info loop0 --pool
loops-pool'. So, this commit fixes this problem when the arguments are
inverted and avoids the segfault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While libvirt-guests.sh is running cases can let guest_is_on fail which
causes check_guests_shutdown to print output.
That output shall not spill into the users of function
check_guests_shutdown which is therefore now returning values in a
variable like guest_is_on already did.
Original-Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Modified-By: Jorge Niedbalski <niedbalski@ubuntu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Cast away enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when the script validates the PKI files and
the certificate 'Subject:' field contains RDNs after
the Common Name (CN), these values are also included,
creating a false result that the CN is not correct.
A small change to the sed regex fixes this issue, by
extracting only the value for CN and nothing else. The
regex is replaced with the exact same regex used to
extract the CN value from the client certificate.
"ln" will not replace an existing symlink, so if you run 'make install'
twice, the second time will get an error:
ln: failed to create symbolic link 'virsh': File exists
We must always remove the symlink target first.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.
At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.
1: https://github.com/scop/bash-completion#faq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Only a small subset of VIR_CONNECT_LIST_DOMAINS_* flags are
actually used for this completer. Remove the unused ones. Note
that this is unrelated to other commands using
VIR_CONNECT_LIST_DOMAINS_* (i.e. cmdList) as this commit targets
the completer only and nothing else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, we have a number of aliases in virsh and even though
these are not visible any more, we have to support them. The problem is
that when trying to print help for the alias, we get SIGSEGV because
there isn't any @def structure anymore and we need to query the command
being aliased instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1538570
Signed-off-by: Erik Skultety <eskultet@redhat.com>
These helpers are called from a single place only - cmdHelp wrapper and
just before the wrapper invokes the helpers, it performs the search,
either for command group or for the command itself, except the result is
discarded and the helper therefore needs to do it again. Drop this
inefficient handling and pass the @def structure rather than a name,
thus preventing the helper from needing to perform the search again.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is a slight change from previous patches since virSecret
does not have a name only UUID strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virConnectListAllNWFilters() has no extra flags yet, which
simplifies things a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Yet again, we don't need listing by device capabilities, so flags
are unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This one is a bit simpler since virStoragePoolListAllVolumes()
has no flags yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The functions defined in these sources are referenced all over
the place, however, compiler only when building with readline.
Thus when building without it linker gets sad as it can't find
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When building without readline, this function does nothing but
return false. Without touching any of its arguments which
triggers a build error. Therefore, provide a stub that has
arguments marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The current state of art is as follows:
1) vshReadlineOptionsGenerator() generate all possible --options
for given command, and then
2) vshReadlineOptionsPrune() clears out already provided ones
from the list.
Not only this brings needless memory complexity it is also not
trivial to get right. We can switch to easier approach: just
don't add already specified --options in the first step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
