As we can add disks based on block devices to containers and bus type
doesn't have any meaning here, let us report always SATA for them.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Since we are going to add block devices as root disks we have
to specify root mount point for boot block devices. But we
shouldn't do this if a filesystem disk with such
target mount point already exists.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Statistics provided through PCS SDK. As we have only async interface in SDK we
need to be subscribed to statistics in order to get it. Trivial solution on
every stat request to subscribe, wait event and then unsubscribe will lead to
significant delays in case of a number of successive requests, as the event
will be delivered on next PCS server notify cycle. On the other hand we don't
want to keep unnesessary subscribtion. So we take an hibrid solution to
subcsribe on first request and then keep a subscription while requests are
active. We populate cache of statistics on subscribtion events and use this
cache to serve libvirts requests.
* Cache details.
Cache is just handle to last arrived event, we call this cache
as if this handle is valid it is used to serve synchronous
statistics requests. We use number of successive events count
to detect that user lost interest to statistics. We reset this
count to 0 on every request. If more than PARALLELS_STATISTICS_DROP_COUNT
successive events arrive we unsubscribe. Special value of -1
of this counter is used to differentiate between subscribed/unsubscribed state
to protect from delayed events.
Values of PARALLELS_STATISTICS_DROP_COUNT and PARALLELS_STATISTICS_TIMEOUT are
just drop-ins, choosen without special consideration.
* Thread safety issues
Use parallelsDomObjFromDomainRef in parallelsDomainBlockStats as
we could wait on domain lock down on stack in prlsdkGetStatsParam
and if we won't keep reference we could get dangling pointer
on return from wait.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@parallels.com>
2 reasons to to this.
1. PCS SDK really don't care of handler return value.
2. It hard to imagine how notifier can handle
subscriber failures. Even if there are some situations
we probably will use some special error codes and
not just throw error codes we get from SDK itself.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@parallels.com>
Use issuer type instead of event type to group
vm related events. This saves us from
explicit enumeration of all vm event types in
prlsdkHandleVmEvent.
We remember driver name in a new field 'drivername' within
private parallels connection structure. When a new domain
is defined we use this name to set corresponding virtType.
We set VIR_DOMAIN_VIRT_VZ for 'vz' driver and
VIR_DOMAIN_VIRT_PARALLELS for 'Parallels'.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
It is necessary to have unpolluted screen when connecting to
parallels driver via virsh.
Otherwise a lot of unexpected output one will get on the console.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Cleanup code in prlsdkLoadDomain doesn't take into account the fact
if private domain structure along with freeing function is assigned
or not. In case it is, we shouldn't call it manually because
virDomainObjListRemove calls it and frees pdom.
Also, allocated def structure should be freed only if it's not
assigned to domain. Otherwise it will be called twice: one time by
virDomainObjListRemove and the second by prlsdkLoadDomain itself.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
It is better to get all necessary parameters and check them on newly
created configuration before actually creating a domain with them or
applying them to an existing domain.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
So far, we are not reporting if numatune was even defined. The
value of zero is blindly returned (which maps onto
VIR_DOMAIN_NUMATUNE_MEM_STRICT). Unfortunately, we are making
decisions based on this value. Instead, we should not only return
the correct value, but report to the caller if the value is valid
at all.
For better viewing of this patch use '-w'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have a lot of passing arguments code just to pass connection
object cause it holds jobTimeout. Taking into account that
right now this value is defined at compile time let's just
get rid of it and make arguments list more clear in many
places.
In case we later need some runtime configurable timeout
value we can provide this value through arguments
function already operate such as a parallels domain
object etc as this timeouts are operation( and thus
object) specific in practice.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@parallels.com>
Since net->model is not defined for containers we shouldn't touch it.
In case network adapter model is defined, a warning about ignoring
it is shown.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Instead of each API copying the same lines of code, lets use the
generic function designed just for that purpose.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In Parallels we do not support device name hints
aka <target dev=../> option and full-fledged device
disk device addressing through
<address type=.. controller=.. bus=.. target=.. unit=../>
and have only one index instead.
In this situation to be consistent we can only take
one-to-one mapping from some reasonable subset
of full address. Values outside this subset are
invalid to create Parallels VMs.
Reasonable mapping is default one defined in virDomainDiskDefAssignAddress.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@parallels.com>
Parallels Cloud Server supports block devices and virtual NIC
live attachment. I implemented that function for block devices so
OpenStack volume attachment is now works.
Signed-off-by: Alexander Burluka <aburluka@parallels.com>
OpenStack needs disk serial number setup because
nova boot --block-device-mapping command generates that param in
libvirt xml. I took QEMU libvirt driver behavior as a base.
QEMU driver skips inability to set serial and continues work.
So Parallels driver will ignore this param too and let domain
boot.
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We handle this parameter for VMs while defining
domains, so let's get this property from PCS and
set corresponding field of virDomainNetDef in
prlsdkLoadDomains function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Call virDomainDefAddImplicitControllers to add disk
controllers, so virDomainDef, filled by this function
will look exactly like the one returned by virDomainDefParseString.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Implement virDomainManagedSave api function. In PCS
this feature called "suspend". You can suspend VM or
CT while it is in running or paused state. And after
resuming (or starting) it will have the same state, as
before suspend.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Split function prlsdkDomainChangeState into
prlsdkDomainChangeStateLocked and prlsdkDomainChangeState.
So it can be used from places, where virDomainObj already
found and locked.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
In order to change an existing domain we delete all existing devices and add
new from scratch. In case of network devices we should also delete corresponding
virtual networks (if any) before removing actual devices from xml. In the patch,
we do it by extending prlsdkDoApplyConfig with a new parameter, which stands for
old xml, and calling prlsdkDelNet every time old xml is specified.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
which is on by default when a new VM/CT is created.
We should do this because this feature can't be controlled
by libvirt now and it sets up some iptables rules. So it's
better to do this to avoid potential conflict of different
set of rules or to avoid unexpected behavior.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
In order to support 'bridge' network adapters in parallels
driver we need to plug our veth devices into corresponding
linux bridges.
We are going to do this by reusing our abstraction of
Virtual Networks in terms of PCS. On a domain creation, we
create a new Virtual Network naming it with the same name
as a source bridge for each network interface.
Having done this, we plug PCS veth interfaces created with names of
target dev into specified bridges using our standard PCS procedures
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Failures of parallelsStorageOpen occured because we incorrectly treated
path to VM' configuration file as a directory. Now initialization of
parallels VM domains home directory is fixed.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Otherwise exporting existing domain config and defining a new one like this:
virsh -c parallels:///system dumpxml instance01 > my.xml
virsh -c parallels:///system define my.xml
leads to an error because PCS default x64 mode turns to x32.
Thus, we need to set correct cpuMode in prlsdkDoApplyConfig() explicitly.
Signed-off-by: Mikhail Feoktistov <mfeoktistov@parallels.com>
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
1. Delete all boot devices for VM instance
2. Find the first HDD from XML and set it as bootable
Now we support only one boot device and it should be HDD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
